PROVN OF 02 X STORE ROOM, (ANCILLARY SHOPS) ELECTRICAL SEC AREA 38.7 SQM ALONGWITH BATTERY CHARGING SHOP, 03 X BATHROOM CUM TOILET BLOCK FOR SINGLE OR ACCN AND 20 X WIRE MESH DOORS WITH COMPLETE FITTING FOR THREE COOK AT MISA CAMP UNDER GE (S) TEZPUR

Amount

Surface dressing n.exc 15 cm deep in soft/loose soil complete all as specified and directed.

Excavation in trenches n exc 1.5 mtr depth nd n exc 1.5 m wide in soft/loose soil and getting out.complete all as specified and directed.

Excavation over area n exc 1.50 mtr in depth and getting out in hard/dense soil complete all as specified and directed

Surface excavation n. exc. 30cm deep and avererging 15cm deep and getting out.

Removing excavated soil to distance n exc 50 mtr and deposited as directed by Engr-in -Charge.

Returning/Filling in trenches in layer n exc 25 cm thick including watering well ramming etc.complete all as specified and directed.

M&L Hard core of gauge n exc 63 mm of broken boulder bellow plinth protection/hard standing/floor.complete all as specified and directed.

M&L PCC (1:4:8) type D-2 using 40 mm graded stone agg as in fdn filling mass concrete.complete all as specified and directed.

M&L for RCC M-25(Design Mix) ( 20 mm graded agg) as in foundation, base for column , plinth beam etc complete all as specified and directed

M&L for RCC M-25(Design Mix) ( 20 mm graded agg) as in column, post etc complete all as specified and directed

M&L for RCC M-25(Design Mix) ( 20 mm graded agg) as in roof slab supported on wall, beam, landing, desk slab etc complete all as specified and directed

M&L for RCC M-25(Design Mix) (20mm gradded agg) as Lintel/chajja etc complete all as specified and directed

M&L for RCC M-25(Design Mix) (20mm gradded agg) as Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

M&L for RCC (1:2:4) type BI (using 20mm graded stone aggt) as in precast slab set in CM (1:4).complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20 mm graded aggregate as in concrete bed to septic tank.complete all as specified and directed.

Use & waste of form work of the side of the concrete foundation, footing, base of column rough finished flat surface.complete all as specified and directed.

Use & waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick ( Horizontal or sloping).complete all as specified and directed.

Use & waste of form work to the side of the column , rough finished flat surface area.complete all as specified and directed.

Use & waste of formwork to side and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, verhangs etc also plays between floors and beams etc.complete all as specified and directed.

Use & waste of formwork to edge of concrete flats, breks in flooors, openings in concrete walls , floors and roofs and sides of RCC/PCC bands in walls, horizontal or loppin and similar work all exceeding 20 cm wide(Where RCC/PCC band in walls spanning and opening , the formwork soffit only shall be paid for under item 7010 of SSR Part-II.complete all as specified and directed.

S&F 10mm dia and over TMT bars as in reinforcement cut to length bent to shape etc as required incl binding with MS wire annealed not less than 0.90 m dia.complete all as specified and directed.

All as oper item No 21 but 5 mm dia and over upto including 10 m dia in stirrups, spacers and binder etc.complete all as specified and directed.

M&L brick work using sub class B brick (old size) curved or straight in plan exc 6 mtr mean radius in cm (1:6).complete all as specified and directed.

M&L brick work using sub class ‘B’ bricks (old size) straight or curved on plan to any radius in half brick work built in CM 1:4 complete all as specified.

M&L for Brickwork, with subclass ‘B’ bricks in one brick thick honey comb work, built in CM(1:4) complete all as directed.

M&L 15 mm thick plastering on other than fair faces of wall surfaces in cm (1:6) finish even and smooth without using extra cement.complete all as specified and directed

M&L 5 mm thick plastering on ceilling concrete surface in cm (1:3) finish even and smooth without using extra cement.complete all as specified and directed.

M&L for 75 mm thick cement concrete in sub base of floor in cement mortar (1:3:6) type C-2 finish even and smooth without using extra cement.complete all as specified and directed.

M&L for rendering 20mm thick in cement mortar 1:4 in two layers of 10mm each using WPC in finishing layer on brick or concrete surfaces finished even & smooth ( WPC for finishing layer will be measured and paid seperately as supply only).complete all as specified and directed.

Supply only integral water proofing compound.

15 mm thick screed bed or bedding layer of mortar in CM 1:6 fixing of tiles in floor.complete all as specified and directed.

M&L 10 mm thick rendering in CM 1:4 on brick or concrete surfaces for fixing of tiles in wall.complete all as specified and directed.

M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

S&F for colour Glazed ceramic tiles 450x350mm of 7 to 8mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match.complete all as specified and directed.

M & L for kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

All as per item No 35 above but in skirting

M & L for Vitrified Ceramic tiles of dark shade 10 mm thick (square/ rectangular) polished, area of each tiles lot exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

All as per item No 37 above, but in vertical walls/skirting

Forming Constrution (Dummy) joints 30 mm deep x 10 mm wide, filled with sealing compound grade A.complete all as specified and directed.

M & L for two coats of exterior emulsion antifungus paint over a coat of primer over a coat of 3 mm thick wall care putty to wall including complete including preparation of surface as specified and directed

M&L applying two coats of distemper over a coat of primer over a coat of 3mm thick a layer of wall care putty on walls.complete all as specified and directed.

Material and Labour including preparation of new plastered wall surfaces and applying three coat of white Wash complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

Material and Labour two coat of cement base paint including preparation of new plastered surfaces complete all as specified and directed.

S&F MS Hold fast confirming to Fe-290 Gde E-165.complete all as specified and directed.

M&L PCC (1:3:6) type C-1 as in bed block of hold fast using 20 mm stone agg steps etc.complete all as specified and directed.

S&F steel ventilator with top hung shutters including hinges with steel handle and steel peg stay with glazeing bars complete all as specified and directed

S&F steel window without glazing bars but with FI/Z section for fixing of gauze and steel handle, peg stay complete all as specified and directed by Engineer-in-Charge

S&F Steel window side hung shutters including box type hinges with steel handle and steel pegs stay complete with glazing bars and fly proofing complete all as specified and directed.

S & F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specifiedcomplete all as specified

S & F for mild steel framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders, framed balusters, walk ways railings, framework of water tanks and similar work confirming to Fe 410 -0 or Fe 310-0 complete all as specified and directed.

M&L for galvanised mild steel wire cloth of 0.56mm dia and average aperture of 1.18mm and fixed in position.complete all as specified and directed.

S & F Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed.complete all as specified and directed.

S/F 5.50mm thick ordinary quality sheet glass in squares exc 0.5 sqm in each pane fixed in aluminium frame complete.

S & F 3mm thick figured glass n exc 0.5 sqm in each pane glazing with oil putty complete

S&F 3 mm thick ordinary quality sheet glass in squares n exc 0.5 sqm in each pane glazing with oil putty ,complete all as specified and directed.

Preparation of new steel surfaces exc 10 cm width or grith and applying 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

M&L for preparing new wood based Surfaces of any description, exc 10 cm width or girth and applying two coats of synthetic enameled painting over a coat of pink primer complete as specified and directed

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly as per specification & drawing.complete all as specified and directed.

S&F 2nd class hard wood shutter 35mm thick plain framed, panalled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated.complete all as specified and directed.

S&F 2nd class hardwood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. Divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters as specified in SSR Part I, section 8, clause 8.23(a).

S & F PVC door with chowkhats frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing.complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length 150mm complete all as specified

S&F 200 mm aluminium anodised barrel tower bolt, of extruded section and fixed in position.complete all as specified and directed.

M&L for extruded aluminium alloy handle fabricated type of 150 mm long

S&F 100 mm Butt hinges medium weight cold rolled mild steel and fixed.

S&F 300 mm Aluminium alloy anodised sliding door bolt, plate type and fixing clip of sheet cast of extruded section and fixing bolt and sliding bolt of extruded section and fixed in position complete

S&F for MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified

Preparation of concrete roof surfaces applying roof treatment as under:- (a) Applying bitumineous primer @ 0.30 litre per Sqm of surface (Shalitex Primer of STP Limited or equivalent as approved by GE (b) Applying coat of hot applied bitumen 85/25 @ 1.20 Kg/Sq m of surfaces (Make : STP Ltd or equivalent as approved by GE) (c) Laying of APP Modified water proofing membrance with non-woven polyster Reinforcement on hot applied bitumen with 100mm over lap at joints by torching on the transverse direction and 75 mm on longitudinal directional all as per manufacturer's instructions (Make : SUPER THERMOLAY OF STP LTD OR EQUIVALENT IWL/TEXSA) (d) Applying a coat of bitumineous aluminium paint @ 0.10 litre/SM (Super Silver sheild of STP Ltd or equivalent as approved by GE)

M&L for 15 mm thick screed bed in cm 1:3 mixed with WPC as per manufactures instruction finished even and smooth over RCC roof slab without using extra cement (WPC shall be measured seperately).complete all as specified and directed.

S & F vitreous china white wash hand basin flat back of size 550 x 400 mm including brackets CP waste coupling 32 mm and PVC waste pipe and 15mm PVC connection complete all as specified and directed.

S&F 1000 Ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F ball brass valve high pressure with polythene float & flynut screwed for iron pipe and fixed of size 20mm bore complete all as directed at site.

S & F for 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S & F for 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S/F vitreous china 580x440 mm,"ORISSA PATTERN" with 'P' or 'S' trap size squatting pan (Exclusive flushing cistern and flush pipe) incl foot rest complete and provision of lime concrete bedding complete all as specified and directed.

S & F 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets , long bend including flush pipe of PVC 32mm dia and connection to pipes etc complete all as specified and directed .

S & F Towel Rail 600mm long of chromium plated brass metal fixed with and including Chromium plated brass screws and wooden/plastic cleats.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified.

S &F brass CP shower rose swivel type fix to iron pipe all as directed.

S & F 15mm Angle Stop valves cast copper alloy,fancy type with chromium plated for iron pipe or for unions and fixed .

S&F bib tap, chromium plated , fancy type, screwed for iron pipe or brass ferrule , 15 mm bore and fixed complete all as specified and directed.

S&F pillar taps, cast copper alloy , with capstan heads, fancy tupe, chromium plated , screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe , and fixed complete all as specified and directed.

S&F 15mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors

S&F 20mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors

S&F 40mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors

S & F for 40 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S& F 75 mm dia PVC pipes single socketed in any length with rubber ring joints, laid in trenches/floors or fixed to wall complete all as specified and directed

S& F 110 mm dia PVC pipes single socketed in any length with rubber ring joints, laid in trenches/floors or fixed to wall complete all as specified and directed

S& F 75 mm dia PVC (SWR) bends any radius fixed in any position, complete all as specified and directed

S& F 110 mm dia PVC (SWR) bends any radius fixed in any position, complete all as specified and directed

Loose filling with broken bricks aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as directed

M&L for supply, laying, jointing and testing salt glazed stone ware drain pipe, grade 'A' 150mm bore (internal dia) laid in trenches on concrete bed to required slope jointed and tested complete all as specified and directed by the Engineer-in-Charge. (Note:- Excavation/earth work and concrete bed shall be measured and paid for separately)

M&L plain cement Concrete 1:3:6 type C2(Using 40mm graded agg) for concrete bed to drain pipes of 150mm bore, under and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed by Engineer-in-Charge

M&L for sand filling under floor or in foundation or in trenches incl watering as reqd.complete all as specified and directed.

S &F chequered cement concrete coloured tiles (glossy finish) 20cm x 20cm x 25 mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment complete all as specified and directed.

Material and labour for point wiring for one light/call bell/fan point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FR cable controlled by one way switch, drawn with PVC casing/caping with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly and sunk cast pressed steel terminal box fixed flush to wall of not less than 1.6 mm thick for mounting of fittings such as switch, socket and speed regulator with 3 mm thick Laminated bakelite sheet cover all as specified and directed. (a) one light/fan/bell point controlled by one, one way switch.

All as per item No 99 but one socket outlet 5 pin 6 amps on independent board.

All as per item No 99 but one 5 amps socket outlet on same board with other switch.

Material and labour for point wiring 2.5 sqmm including 1.5 sq mm PVC insulated, unsheathed multistranded copper conductor cable 1100 volts grade, single core, earth continuity conductor connected to common earth dolly for one 3/5 pin 15 Amps socket out let on independent board.

Supply and fix Modular switch one way 6 Amp.

Supply and fix Modular switch one way 16 Amp.

Supply and fix modular type electronic fan regulator.

Supply and fix modular socket outlet 2 in 1, 3 pin 6 A.

Supply and fix Modular socket outlet 16 Amps

Material and labour for ceiling rose polycarbonate isolated body 3 ways terminals.

Supply and fixing modular metal flush box 1 modules complete all as specified and as directed.

Supply and fixing modular metal flush box 2 modules complete all as specified and as directed.

Supply and fixing modular metal flush box 3 modules complete all as specified and as directed.

Supply and fixing modular metal flush box 6 modules complete all as specified and as directed.

Supply and fixing modular metal flush box 8 modules complete all as specified and as directed.

Supply and fixing modular white cover plate with frame 1 modules complete all as specified and as directed. Make: Havells/Anchor or equivalent make as approved by GE.

Supply and fixing modular white cover plate with frame 2 modules complete all as specified and as directed. Make: Havells/Anchor or equivalent make as approved by GE.

Supply and fixing modular white cover plate with frame 3 modules complete all as specified and as directed. Make: Havells/Anchor or equivalent make as approved by GE.

Supply and fixing modular white cover plate with frame 6 modules complete all as specified and as directed. Make: Havells/Anchor or equivalent make as approved by GE.

Supply and fixing modular white cover plate with frame 8 modules complete all as specified and as directed. Make: Havells/Anchor or equivalent make as approved by GE.

Supply and fix in replacement of PVC Square box for mounting ceiling rose/holder complete all as specified and directed.

Supply and fix in replacement of Surface mounting plastic box 8x6 inch size including all fixing accories complete all as specified and directed.

Supply and fixing LED street lights not less than 25 W with a single piece of pressure die cast aluminium housing and secondary optics and individual LEDs for a better light distribution and control with IP66 degree of protection and integrated driver with 10KV surge protection including GI bracket of dia 32 mm complete as all as directed.

Supply and fixing LED fitting 20 watts 6000k high efficiency enviormental friendly long life mounting on PVC round/square PVC block and making all connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed. Make :- Havells cat No. ENDURALINEARNEOBS20WLED865SPCWH

Supply and fix sheet metal enclosures TPN DB's 4 way when MCBs to be used 415 Volts, double door all as specified and directed.

Supply and fix in replacement of SPN double door MCB distribution board sheet steel, powder coated 8 way fitted with bus bar Neutral link, earth bar and din rail complete all as directed.

Supply and fix in replacement of SPN double door MCB distribution board sheet steel, powder coated 4 way fitted with bus bar Neutral link, earth bar and din rail complete all as directed.

S & F MCB TPN 415 Volts, 63 Amps, 50 Hz, breaking capacity 10KA, C series all as specified and directed

S & F in replcement of MCB SPN 240 Volts, 50-63 Amps, 50 Hz, breaking capacity 10KA, C series all as specified and directed

S & F in replcement of MCB SPN 240 Volts, 6-32 Amps, 50 Hz, breaking capacity 10KA, C series all as specified and directed

S & F in replacement of MCB SP 6-32 Amps, 240 V, 50 HZ,breaking capacity 10KA, C series all as specified and directed.

Supply, install, testing and commissioning of ceiling fan 1200 mm sweep complete all as specified and directed. Make :Havells Model Spark Deco or equivalent in crampton, Bajaj

Supply and fix exahust fan Single phase 230/240 V of size 300 mm sweep metal body heavy duty turbo HHDEF 900 RPM all as specified and directed.

S&F in replacement 1100 Volts grade heavy duty cable PVC insulated standred twin core flat or circular aluminium conductor of size 4 Sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire complete all as specified and directed.

Supply and fix in repair metal body heavy duty exhaust fan 450 mm sweep 900 RPM and metal blades with double ball bearing metal protective bird guard, AC single phase, including making hole of suitable size, electrical connection with twisted three core PVC insulated copper conductor from ceiling rose complete all as specified and as directed. Make: Model- Turbo HDEF 900 RPM ISI of Usha

M&L for Brick Sub Class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and as directed.

Supply,laying in repair in trenches of XLPE UG cable insulated aluminium stranded conductor served with an inner sheathing or PVC tape heavy duty armoured upto 1100volts (earthed) GI steeel strip and overall PVC sheathed nominal cross sectional area 16 sqmm 4 core testing complete all as specified and directed.

Supply,laying in repair in trenches of XLPE UG cable insulated aluminium stranded conductor served with an inner sheathing or PVC tape heavy duty armoured upto 1100volts (earthed) GI steeel strip and overall PVC sheathed nominal cross sectional area 10 sqmm 2 core testing complete all as specified and directed.

S&F in replacement steel water tubing 50 mm dia of bore light grade galvanised with all fittings laid in trenches / fixing with surface of wall after drawn through electric cable by means of nuts bolt and washers all as directed .

M & L for earthing complete with GI earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level ) with top edge of the plate not less than 1.5 m below normal ground level , connected to galvanised earth lead iron wire 4mm dia by means of GI bolts nuts and washers of galvanised iron or steel etc all as shown in electrical plate No.3 including earth work PCC pit and RCC pit cover, funnel with watering pipe ,wire mesh ,alternate layer of salt and charcoal, GI protection pipe light grade and testing on completion all as specified and directed by Engr-in-charge. Note 1-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose.

M/S M N ENTERPRISE

Anil Kumar Sarmah

sanjay upadhya

M/S Jiban Krishan Das and Co

M/S Deep-Jeet

M/s Brahamaputra Wood Industries