PETTY REPAIRS AGAINST DAY TO DAY COMPLAINTS CIVIL ENGG WORKS IN POCKET 1 2 3 4 AT ROORKEE AND REPAIR MAINT OF PLUMBING WORK SANITARY FITTINGS TILING JOINERY CEILING ROOFING LEAKAGE SEEPAGE AND WPT TO RCC ROOF AT PURKAZI UNDER GE ROORKEE

Amount

S&F in repairs of 15 mm bore size PTMT bib tap complete all as specified and directed. Make : Prayag/ Polytuf/ Symat).

S&F in repairs brass chromium plated bib tap (short body) for iron pipe of 15 mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed. Make : Prayag Cat Part No. PIS-06 or equivalent range of Marc, Jaquar, Johnson.

S&F in repairs brass chromium plated bib tap (long body) for iron pipe of 15 mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed. Make : Prayag Cat Part No. 8908 or or equivalent range of Marc, Jaquar, Johnson.

S&F in repairs 15 mm dia brass chromium plated fancy type pillar tap (with Aerator) with fly nuts capstan head screwed down high pressure with or without lettered hot or cold with long screwed shank complete all as specified and directed. Make : Prayag Cat Part No. 8903 or equivalent range of Marc, Jaquar, Johnson.

S&F in repair brass CP mixer (arial single lever basin mixer) for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. Make : Prayag Cat Part No. 8951 or equivalent range of Marc, Jaquar, Johnson.

S&F in repairs ball valve of PTMT with Polyethene float for 20 mm bore pipe complete all as specified and directed. Make : Prayag / Symet / Polytuf.

S&F in repairs ball valve of PTMT with Polyethene float for 15mm bore pipe complete all as specified and directed. Make : Prayag / Symet / Polytuf.

S&F in repairs stop/angle cock ISI marked fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15 mm bore complete all as specified and directed. Make : Prayag Cat Part No. 8910 or equivalent of Marc, Jaquar, Johnson.

S&F in repairs stop cock ISI marked fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 20 mm bore complete all as specified and directed.

S&F in repairs chromium plated brass stop cock fancy type (Concealed Stop Cock incl exposed Part of Concealed Stop Cock) screwed both ends high pressure for 15 mm bore size iron pipe or ferrule complete all as specified and directed. Make : Prayag Cat Part No. 8326 or equivalent of Marc, Jaquar, Johnson.

S&F in repairs CP brass shower rose (single lever over head shower incl shower arm casted 190 mm long flat shape with flange) 125 mm size suitable for 15 mm bore pipe complete all as specified and directed. Make : Prayag Cat Part No. BOS-90S or equivalent of Marc, Jaquar, Johnson.

S&F in repairs PVC connection 450 mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed. Make : Prayag / Symet / Polytuf.

S&F in repairs PTMT waste fitting 32 mm bore for WHB complete all as specified and directed. Make : Prayag / Symet / Polytuf.

S&F in repairs PTMT waste fitting 40 mm size suitable for sink etc complete all as specified and directed. Make : Prayag / Symet / Polytuf.

S&F in repairs PVC flush pipe of 32mm dia pipe for connecting low level flushing cistern including jointing to WC complete all as specified and directed. Make : Prayag / Symet / Polytuf.

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed. Make : Hindware/ Cera / Commender.

S&F in repairs plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover including mild steel chromium plated hinging device complete all as specified and directed. Make : Parryware/ Hindware.

S&F in repairs viterous china wash down water closet pan (Pedestal pattern) white including 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and as directed. Make : Parryware/Hindware

S&F in repairs vitreous china squatting (Orissa pattern) long pan of size 580x440mm white with intergral footrest and 'P' or 'S' trap including connection to trap and flushing pipe, anti-syphonage pipe etc (excluding flushing cistern and flush pipe) and making good to floor to match the existing surfaces complete all as specified and directed. Make : Parryware/Hindware/Cera/HR Johnson.

S&F in repairs vitreous china wash hand basin, white flat back size 550 x 400 mm (excluding taps, waste pipe, chain and plug) but including CP brass waste coupling with long screwed shank and a pair of MS bracket etc complete all as specified and directed. Make : Ist quality of Hindware/Parryware/Cera/HR Johnson.

Taking up or down 15mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Refixing old 15mm bore GI tubing of any description and in any postion including replacement of fittings (if required) of medium grade complete all as specified and directed.

Refixing old 20mm bore GI tubing of any description and in any postion including replacement of fittings (if required) of medium grade complete all as specified and directed.

M&L 15mm bore GI tubing ISI marked medium grade with all fittings and fixed to walls, ceilling or laid in floor including connection etc and cutting chases in wall to conceal the pipe, if required, complete all as specified and directed. Make : Tata / Jindal / Swastik / Prakash.

M&L 20mm bore GI tubing ISI marked medium grade with all fittings and fixed to walls, ceilling or laid in floor including connection etc and cutting chases in wall to conceal the pipe, if required, complete all as specified and directed. Make : Tata / Jindal / Swastik / Prakash.

Hacking out old broken glass (any thickness, size, quality or description) from wooden / metal frames, glazed with oil putty or fixed with beads including punching or drilling out old glazing pins / spring clips and providing new glazing pins / spring clips complete all as specified and directed.

S&F of 3 mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with wooden beads in square n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F of 3 mm thick figured glass, pin head type and glazing with oil putty or fixed with wooden beads in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire stapple etc to wooden / steel doors / windows complete all as specified and directed.

S&F in repairs towel rail 600 mm long 20 mm dia brass chromium plated (ISI Marked), fixed to wall with CP brass screws etc, complete all as specified and directed.

S&F in repairs MS sliding door bolts 300 mm size (ISI Marked), plate type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on stapple plate complete all as specified and directed.

S&F in repairs 100 mm size butt hinges (ISI Marked), medium weight, cold rolled, mild steel, fixed to wooden doors/windows with screws or with welding to steel frames at any floor up to four storied bldgs and making it functional complete all as specified and directed.

S&F in repairs 150mm size mild steel barrel tower bolts (ISI Marked), stove enamelled black with bright bolt complete all as specified and directed.

S&F in repairs 150mm size mild steel pressed handles (ISI Marked), oval type, stove enamelled black complete all as specified and directed.

S&F in repairs 75 mm size butt hinges (ISI Marked), medium weight, cold rolled, mild steel, fixed to wooden doors/windows with screws or with welding to steel frames at any floor up to four storied bldgs and making it functional complete all as specified and directed.

S&F in repairs 100mm size mild steel barrel tower bolts (ISI Marked), stove enamelled black with bright bolts complete all as specified and directed.

S&F in repairs 100mm size mild steel pressed handles (ISI Marked), oval type, stove enamelled black complete all as specified and directed.

S&F in repairs 125 mm size brass hasp and staple (ISI Marked) with mild steel hinge pin, safety type including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F continuous (piano) hinges (ISI Marked), mild steel, bright finish or electrogalvanised width of flap 30mm (when open) and fixed with screws complete all as specified and directed .

S&F in repairs PTMT urinal spreader of any colour for fixing with 15 mm dia pipe complete all as specified and directed. Make : Prayag / Polytuf / Symet

S&F in repairs plain alumimium sheet 0.56 mm thick alloy 31000 H4, fixed with alluminium alloy screws as in ridges, hips, vallies gutters & straight flashings, doors complete all as specified and directed.

S&F in repair door closer hydraulically regulated, alluminium (extruded section body) designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed. Make : Ritz / Sandhu / Plaza

S&F in repairs 150mm size mild steel ordinary door spring closer (Helical door spring) including roller and roller plate and fixed to steel frame or to wooden chowkhat complete all as specified and directed. Make : Ritz / Sandhu / Plaza

S&F in repairs double action floor spring hydraulically regulated made of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel, heavy duty and fixed complete all as specified and directed. Make : Ritz / Sandhu / Plaza

S&F in repairs HDPE PVC cover for PVC tank of 500 ltrs capacity complete all as specified and directed. Make : Syntex/ Polytuf

S&F in repairs 300 mm size Stainless Steel sliding door bolts (ISI Marked) with hasp, stapple (bolt type) and fixing clips of sheet cast or extruded sections with and including fixing bolts complete all as specified and directed.

S&F in repairs 150 mm size Stainless Steel tower bolts of extruded section (ISI Marked) and fixed to shutter complete all as specified and directed.

S&F in repairs 150 mm size Stainless Steel handles fabricated type anodised (ISI Marked) complete all as specified and directed.

S&F in repairs 100 mm size PTMT butt hinges and fixed complete all as specified and directed. Make : Prayag / Polytuf

S&F in repairs 200mm size PTMT tower bolt and fixed complete all as specified and directed. Make : Prayag / Polytuf

S&F in repair 125mm size PTMT door handles and fixed complete all as specified and directed. Make : Prayag / Polytuf

S&F in repairs for stainless steel peg set of six (ISI Marked) complete all as specified and directed.

M&L for repairs to aluminium door of any size and description including taking down, making adjustment to floor springs and refixing complete all as specified and directed.

Easing and adjusting of wooden window shutters/CB shutters (One unit shall comprise of one window/CB/Showcase irrespective of number of leaves) for properly closing/opening, tightening of hinges or changing the position of hinges, adjustement of tower bolts, sliding bolts etc for easy & smooth fuctioning complete all as specified and directed.

Easing and adjusting of wooden door shutters (One unit shall comprise of one door shutter irrespective of number of leaves) for properly closing/opening, tightening of hinges or changing the position of hinges, adjustement of tower bolts, sliding bolt etc for easy & smooth functioning complete all as specified and directed.

Easing of steel window shutters (One unit shall comprise of one window irrespective of number of leaves) for properly closing/opening, welding of hinges or handles (including replacing of handles/ hinges, if required) or changing the position of hinges complete all as specified and directed.

S&F in repairs mild steel galvanised iron, medium grade fittings (ISI marked) such as socket, elbow, nipple, tee, union etc suitable for 15 mm bore GI tubing complete all as specified and directed.

S&F in repairs mild steel galvanised iron, medium grade fittings (ISI marked) such as socket, elbow, nipple, tee, union etc suitable for 20 mm bore GI tubing complete all as specified and directed.

S&F in repairs 32 mm bore and 750 mm long PVC waste pipe for WHB complete all as specified and directed. Make : Polyplast / Prayag / Polytuf.

S&F in repairs 40 mm bore and 750 mm long PVC waste pipe for WHB complete all as specified and directed. Make : Polyplast / Prayag / Polytuf.

S&F in repairs mild steel chromium plated grating (round) 125 mm dia, fixed in cement mortor 1:3 over floor/nahani traps (with or without waste hole) complete all as specified and directed.

S&F in repairs CP brass health faucet with 8 mm dia 1.20 mtr long flexible tube & wall hook complete all as specified and directed. Make : Jaquar Cat Part No. ALD-573 or equivalent of Marc, Hensa, Johnson.

S&F in repair CP brass wall mixer with 115 mm bend pipe complete all as specified and directed. Make : Prayag Cat Part No. 8975 or equivalent of Marc, Jaquar, Johnson.

S&F in repairs 25 mm dia fancy type stainless steel curtain rod with and including mild steel brackets, stops, side/end caps and necessary rings etc of suitable size and matching colour complete all as specified and directed.

S&F in repairs 20 mm wide mild steel door seal with brush, fixed in suitable length to doors complete all as specified and directed.

S&F in repairs aluminium floor door stopper double legged with rubber shoe of suitable size complete all as specified and directed. Make : Ashish or other equal and approved make & quality.

S&F in repairs CP brass toilet paper holder complete all as specified and directed. Make : Prayag / Jaguar / Marc / Johnson.

M&L in repairs magnetic catcher suitable for cupboard shutters, shelves etc complete all as specified and directed. Make : Locally available best quality.

S&F of stainless steel plate rack of size 31"x30"x10" made of 1 mm thick stainless steel plate and fixed to wall complete all as specified and directed.

S&F in repairs factory made prelaminated /plain/ PVC shutter of 9mm (+ 0.7mm) thickness, consisting of panel 9 mm(+ 0.7mm) thick celuka ply of density 600 Kg / Cbm, manufactured by an ISO-9000 certified company using for back side shutter celuka ply 9 mm (+ 0.7mm) thick, cut in desired size of shutter and fixed with frame of kitchen accessory etc complete as per manufacturer's specification and directions of GE complete all as specified and directed.

S&F in repairs factory made prelaminated / plain/ PVC shutter of 18 mm (+ 0.7mm) thickness consisting of panel of 18 mm (+ 0.7mm) thick celuka ply of density 600 Kg / Cbm manufactured by an ISO-9000 certified company using for shutter celuka ply 18 mm (+ 0.7mm) thick, cut in desired size of shutter and fixed with the frame of kitchen accessory at all four edges of shutter using 13/6 size self tapping steel scres. The edges of shutter to be lipped with 18 mm wide x 1 mm thick PVC sheet using solvent cement etc including stainless steel handle, tower bolt, magnetic catcher etc complete as per manufacturer's specification and directions of GE complete all as specified and directed.

S&F in repairs stainless steel basket cutlurry of size-15"x20"x4" (width may vary as per site conditions from 15" to 21") including powder coated drawer runner/ channel and soft close as required complete as per manufaturer's instructions complete all as specified and directed. PVC shutter/ board paid seperately under respective item. Make: Hettich or equivalent.

S&F in repairs stainless steel basket plain size-15"x20"x6" (width may vary as per site conditions from 15" to 21") including powder coated drawer runner/ channel as required as per manufaturer's instructions complete all as specified. PVC shutter/ board paid seperately under respective item. Make: Hettich or equivalent.

S&F in repairs stainless steel bascket for "Thali" size-15"x20"x8" (width may vary as per site condition from 15" to 21") including powder coated drawer runner/ channel as required as per manufaturer's instructions complete all as specified. PVC shutter/ board paid seperately under respective item. Make Hettich or equivalent.

S&F in repairs stainless steel bascket for plate size-15"x20"x6" (width may vary as per site condition from 15" to 21") including powder coated drawer runner/ channel as required as per manufaturer's instructions complete all as specified. PVC shutter/ board paid seperately under respective item. Make: Hettich and equivalent.

S&F in repairs stainless steel bascket plain size-15"x20"x8" (width may vary as per site condition from 15" to 21") including powder coated drawer runner/ channel as required complete all as specified as per manufaturer's instructions. PVC shutter/ board paid seperately under respective item. Make: Hettich and equivalent.

Demolition of Brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed .

M&L for brick work in cement mortar (1:6) using old size sub class ‘B’ bricks, straight or curved on plan exc 6 m mean radius complete all as specified and directed.

M&L for brick work in cement mortar (1:4) using old size sub class ‘B’ bricks in half brick thick walls, straight or curved on plan any radius complete all as specified and directed .

Demolition of cemet concrete (reinforced) of any description and in any position complete all as specified and directed.

M&L for precast cement concrete (1:2:4) type B1 (Using 20mm graded crushed stone aggregate) as in landings, cover slabs for manholes, kitchen platforms and similar articles with plain fair faces including chamfers, weathering, throating etc and setting in cement mortar (1:6) complete all as specified and directed.

M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending, hooking ends, hooping for columns and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for Udaipur Green marble 12 to14 mm thick (table rubbed and polished) in cooking platforms and the like, set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of stone slab including moulding to outer edges if required complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any descriptionin ground floors and pavings (below or above GL) complete all as specified and directed.

M&L for 75 mm thick cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregte) as in floor, hard standing, plinth protection etc, laid in alternate bays n.exc 2.50 Sqm each and joints filled with with mastic filling, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick cement concrete (1:4:8) type B2 (using 40mm graded crushed stone aggregate) as in sub base and the like complete all as specified and directed.

S&F rubber door cill 40/50mm thick as required and fixed in position with required nails etc complete all as specified and directed.

M&L for 60 mm thick Machine pressed precast conctete of M-35 Grade interlocking paver block of any shape and size, confirming to IS 15658-2006 with grey cement and pigment complete all as specified and directed. Make: ECO/KRISHNA

Supply and laying dry sand in 25mm thick layer for cushioning to interlocking paver blocks complete all as specified and directed.

M&L for 20-25mm thick Machine cut kota stone slab flooring with & including 100mm wide white marble border, laid over and including 15mm thick cement screed bed in cement mortar (1:6), set and jointed in neat grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 20-25mm thick Machine cut kota stone slab in vertical surfaces as in skirting, laid over and including 10mm thick rendering in cement mortar (1:4), set and jointed in neat grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 40mm thick cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in flooring, finished even and smooth using extra cement complete all as specified and directed.

M&L for cement concrete (1:3:6) type C2 (using 40 mm graded crushedstone aggregate) as in surface channels and drains complete all as specified and directed.

M&L extra for forming fair finished drain or channel surfaces 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L for providing cement concrete (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in cills, copings, edging to tiled paths, bed blocks, hold fasts and similar work complete all as specified and directed.

M&L for granite stone slab 14 to16 mm thick (table rubbed and polished) in cooking platforms and the like, set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding to outer edges if required complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non-skid ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed ceramic coloured joint free tiles of size 450X 350X 7 mm / 450x 300 x7mm thick as required, laid over and including 10mm thick rendering in cement moratr (1:4) in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed ceramic coloured joint free tiles of size 300X 200X 7 mm thick, laid over and including 10mm thick rendering in cement moratr (1:4) in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Taking down cement or cement lime plaster from brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water etccomplete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar (1:3) on fair faces of concrete as in ceiling, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying 1.5mm thick wall care putty of approved make, applying a coat of wall primer and two coats of oil bound distemper (White or tinted) complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for preparing old decorated wall surfaces by brooming, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of cement base paint complete all as specified and directed. Make : Asian Paint/Berger.

M&L for preparing old decorated surfaces of walls including cornices, pillasters etc by complete removal of existing decorative treatment, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, finishing the surfaces with 1.5mm thick layer of wall care putty and applying two coats of oil bound distemper (White or tinted) complete all as specified and directed.

M&L for preparing old decorated surfaces of ceiling, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of white wash complete all as specified and directed.

M&L for preparing old decorated surfaces of walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of white wash complete all as specified and directed.

Dismantling of water storage tanks of 1000 ltrs capacity of any description and removing from site complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 ltrs capacity including 20mm dia PTMT ball valve (Ball valve make: prayag), nipples etc for connecting to inlet & outlet pipes, hoisted and fixed in position complete all as specified and directed.

Dismantling of water storage tanks of 500 ltrs capacity of any description and removing from site complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 ltrs capacity including 20mm dia PTMT ball valve (Ball valve make: prayag), nipples etc for connecting to inlet & outlet pipes, hoisted and fixed in position complete all as specified and directed.

S&F in repair 15mm dia stop/ angle valve of PTMT any colour, high pressure, screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 90gms)

S&F in repair 20mm dia stop valve of PTMT any colour, high pressure, screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 92gms)

S&F in repair 15mm dia pillar tap of PTMT any colour, high pressure, screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 110gms)

S&F in repairs brass chromium plated bib tap (short body) for iron pipe of 15 mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed. Make : ESSCO Jaguar Group Cat Part No. TQT-511 or equivalent range of Marc, Jaquar, Johnson.

S&F in repairs 15mm stop valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly or push button type handle as required, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs CP brass shower rose (single lever over head shower incl shower arm casted 190 mm long flat shape with flange) 125 mm size suitable for 15 mm bore pipe complete all as specified and directed. Make: Prayag cat part No-BOS-87 or equivalent.

S&F in repairs PVC connection 600 mm long with 2 Nos brass check nuts suitable for 15 mm bore of pipe with washer complete all as specified and directed. Make : Prayag / Symet / Polytuf.

S&F in repair vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe & waste pipe) fixing plugs, bedding urinal against wall in cement mortar (1:2) securing to plug with and including 60mm long brass screws, urinal spreader of PTMT any colour fixing with 15mm dia pipe, pointing around urinal back in cement complete all as specified and directed.

S&F in repair stainless steel jet cleaner for EWC with flexible pipe complete all as specified and directed.

S&F in repair stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste fittings, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. Make:- Nirali and euivalant).

S&F in repairs of 20 mm dia mild steel covered with PVC sleeves, fancy type curtain rod with and including mild steel matching colour fancy type brackets, stops,side/end caps of suitable size and necessary rings etc complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) pipes single socketed (ISI Marked) in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) bends / elbow (ISI Marked) complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified and directed .

Taking down chowkats or frames with shutters (without taking off shutter from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed .

S&F 2nd class hard wood plain solid, straight chowkhat and frame, rebated on the solid, rounded or chamfered, put togther with glue, pinned at joints complete all as specified and directed .

S&F 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, water proof/ weather proof type on both sides complete all as specified and directed.

S&F 30 mm thick 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and directed .

S&F 250 mm MS sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on stapple plate complete all as specified and directed.

S&F 100 mm size butt hinges, medium weight cold rolled mild steel complete complete all as specified and directed.

S&F 150mm size mild steel barrel tower bolts, stove enamelled black with bright bolts and fixed complete all as specified and directed.

S&F 150mm size mild steel pressed handles oval type stove enamelled black, complete all as specified and directed.

S&F in repairs 250 mm MS sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on stapple plate complete all as specified and directed.

M&L for running welding in repairs thickness of metal exc 6 mm but n. exc 9 mm complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either sides & as gap insert for top rail & bottom rails, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed Make : Rajshree / Syntex.

S&F solid PVC door frame of size, 50x47mm, made out of 5mm thick plain colour PVC sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and directed. Make : Rajshree / Syntex.

S&F factory made solid panel PVC shutter 30mm thick (style) for window/ ventilators consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, fully glazing wirh 3mm thick frosted/ coloured glass pane to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in with and including frame work, hold fast, 02 Nos 100mm PTMT tower bolt, 02 Nos 75mm PTMT hinges and 01 No. 100 mm PTMT handle at site as per specification & drawing complete all as specified and directed . Make : Rajshree / Syntex.

S&F 100 mm size PTMT butt hinges complete all as specified and directed. Make : Prayag / Polytuf

S&F 150mm size PTMT tower Bolt complete all as specified and directed. Make : Prayag / Polytuf

S&F 125mm size PTMT door handles complete all as specified and directed. Make : Prayag / Polytuf

Taking down chowkats or frames with shutters (without taking off shutter from the frame) n.exc 1.5 Sqm each complete all as specified and directed .

S&F steel windows with side hung shutters including box type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including box type hinges with steel handles and steel peg stay complete without glazing bars complete all as specified and directed.

S&F mild steel framed work as in grills, gratings, hold fast etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tank and similar work confirming to Fe 290 Gde E165 complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

M&L for preparing new wooden and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over coar of pink primer complete all as specified and directed.

M&L for preparing new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparing old painted wooden and wood based surfacesof any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old painted steel and iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F 100mm dia cast iron nahani trap with grating including jointing to waste pipe and fixed in cement concrete (1:2:4) type B-1 complete all as specified and directed.

S&F in repairs 18/19 mm thick plain particle board interior grade fixed with screws to timber frame work as in cupboard shutters, shelves including wooden beading at exposed edges complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section, fixed in framed work in any position complete all as specified and directed.

M&L for rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails, bolts and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, conforming to Fe 410 Gde E-250, Quality A complete all as specified and directed.

S&F in repairs 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc, fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.

S&F in repairs 6mm thick two piece AC serrated Ridges for corrugated sheet with 'L' or 'J' hook cranked bolts complete all as specified and as directed.

M&L 0.50mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.

Taking down alluminium door/ window shutter with/ without frame as per site requirement and repair to butt hinges/ screws (including replacement of hinges/ screws/ rubber beading, if required) and re-fixed to frame / wall complete all as specified and directed.

S&F in repair 5.5mm thick tinted sheet glass in Aluminum door/ window shutters, fixed with rubber beading complete all as specified and directed.

Taking down wall/ceiling boards, AC plain sheets or plywood of any thickness incluing cover fillets all as specified and directed.

S&F Designer ceiling board 60cmX60cmX4mm thick with GI framed work of size 4mm main tee 24x38.5mm and cross tee of size 24X28.5mm thick made out of PGI sheet 0.30mm thick doubled at web and single at flange, flange covered with powder coated sheet 0.25mm thick and angle 24xx24x0.4mm covered with powder coated sheet 0.25mm thick for ceiling, suspended with GI wire 3mm dia and upto 2 mtr long complete including plugging in brick walls with steel rawl plugs @ 600mm C/C complete all as specified and directed.

S&F self adhessive flash strip suitable for packing of holes/ crackes of AC sheet complete all as specified and directed.

S&F in repairs stainless steel soap dish complete all as spesified and directed.

S&F in repairs stainless steel foldable towel rack fixed to wall with stainless steel screws etc complete all as specified and directed. Make:- Prayag Cat Part No.: SS-1 or equivalent.

M&L for roof treatment with polymeric membrance (APP based) with non woven polyster mat as reinforcement as per following specifications:- (a) M&L for preparation of surface by removal of existing water proofing treatment of tarfelt and taking down plaster to ensure or clean smooth and dry surface including preparing the surface to receive plastering and applying 15 mm thick plastering in cement mortar (1:4) mixed with and including water proofing compound as per manufacturer's instructions. (b) Providing and laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.30 ltr/sqm on dry and cleaned plastered roof surfaces. (c) M&L for providing and laying APP based polymeric membrance 3 mm thick of weight 3.60 Kg /Sqm with non woven polyster mat as reinforcement on primed roof surfaces by torch application with side laps & end over laps etc as per manufacturer's instructions. Make : STP Ltd, Dr Fixit (d) M&L for finishing of top surface by applying two coats of aluminium paint over a coat of blown bitumen. Make : STP Ltd, Dr Fixit

nautiyalandcompany

M/S IRFAN AHMAD CONTRACTOR