Supplying and installation of Generators to CAO office and Inspection Bunglow at Bheemarayanagudi

Supplying and installation of Generators to CAO office and Inspection Bunglow at Bheemarayanagudi

Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO 3046/ ISO 8528 & IS 1002/ISO...

Supply, Erection, testing and commissioning of AMF panel suitable for .....kVAD Gset. Thepanel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, a...

Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of s...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat o...

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drop...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cauti...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 25 Sqm...

Cable Joint and wiring (for HT & LT UG Cable) LT UG Cable Heat shrinkable Straight Through Joint 2.5 to 25 Sqmm

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 50 Sq...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 35 to 95 Sqmm

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

Cable Joint and wiring (for HT & LT UG Cable) LT UG Cable Heat shrinkable Straight Through Joint 35 to 95 Sqmm

Hitachi 2- Stroke Petrol Driven, Air Cooled Electronic type Diamond Chain Saw Hitachi ,(Hitachi CS40EA 18inch Petrol Chain Saw)Diamond Chain saw suitable for cutting reinforced concrete at least 360 m...

Leo Hand Held Brush Cutter Petrol Engine Brush Cutter with Cutting Blade/ Circular Saw Attachment, 1525 to 1549 345 to 349 LeoR (HONDA GX 50):Type of Machine:Brush Cutter with Cutting Blade/ Circular ...