15th FC 2021-22 1st and 2nd Installment

Scarifing the existing B.T Surface to a depth of 50 mm by Mechanical Means and disposal of scarified material with all leads and lifts up to 1000 Mtrs ap per MoRTH ( 5th Revision) and as directed by the Engineer-in-charge.

Providing Plain Cement Concrete nominal mix (1:4:8) in open foundations using 40 mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications. etc., complete and as directed by Engineer in Charge of work.

Construction of VCC M30 grade design mix un-reinforced, expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per IS codes , coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 28- days, and water finishing to lines and grade as per drawing and Technical Specification (Note: - Payment will be released only after satisfactory core results of the concrete strength for 28 days as per IS code) No part payment will be allowed

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) bars (Fe 500 grade as per IS 1786-1979) of different diameters for CC Roadfor Tie roads and Dowel bars in transverse and longitudinal Joints as per Table 8 and table 9 IRC 58-2022. and all incidental, operational labour charges such as cutting, bending, palcing in position tying including sales and other taxes on all meterials etc., complete for finished item of work. (as amendment in (2011-12 SSR) .