Restoration of rain damages to various LWSS WSS under Jal Shakti Division Dharampur in Tehsil Dharampur Distt. Mandi HP

Excavation in foundation, trenches etc. in earth work, lift up to 1.50 meters stacking the excavated soil not more than 3 meter clear from the edge of excavation and the rreturning the stacked soil in 15 cm layer, when required into plinth sides of foundation etc. consolidating eache deposit layer by ramming and watering and disposing of all surplus excavated earth as directed with in a lead of 20 meters as per direction and to the entire satisfaction of Engineer- in- charge up to leads and lifts.

Providing Laying, jointing and testing in trenches galvanised mild steel tube of light grade screwed and socketed complete including providing and fixing tube fitting such as union, tees, socket etc (excluding cost of bends and valves) for the following dia as per direction and to the entire satisfaction of Engineer-in-charge. ( Labour rate ).

GI 15mm Dia (L.C)

GI 20mm Dia (L.C)

GI 25mm Dia (L.C)

GI 40mm Dia (L.C)

Providing Laying, jointing and testing in trenches (to level or grade) of following dia GMS pipe jointed with butt welded joints of below diametre conforming to IS 1239-1990 (Part - I ) with latest upto date amendments of grade and wall thickness as specified below, suitable to withstand required hydraulic test pressure in randum length 4m-6m with plain ends and jointed with butt welded. Three layers of weld run to be provided to make the joints leak proof (earth work and butt welded joints to be mearsured and paid separately) and to entire satisfaction of the Engineer-in-Charge.The laying of pipes conform to IS 5822-1994 and as per CPHEEO manual and will include all operations such as cutting, welding and jointing including flushing, cleaning and hydraulic testing complete in all respects to the entire satisfaction of Engineer-in- Charge.

GMS 100mm Dia (M.C) P/E

GMS 150mm Dia (M.C) P/E

Providing laying, jointing and testing in trenches of GMSERW fully Butt welded pipe conforming to IS/ISO:3183-2007, L210 or A of below mentioned grade in item as per dimensions, weight and test pressure mentioned there in code (mill tolerances to be restricted within 3%) in random lengths of 6 to 7 mtrs including the cost of fabrication of bends by butt welding from parent tube as required at site. The welded joints and welding of pipe will be down as per IS:816-1969 with electrodes as per IS:814-1991 of make Adwani/Orelon (Adore)/ESAB. The laying & jointing of pipe should conform to IS:5822-1994 (earth work in trenches and butt welded joints except in bends to be measured and paid for separatly) The pipes and specials shall have out side coating with galvanised as per BIS 4736, the galvanisation is done by the manufacturing frim itself complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.