05 / EE/PMD/PHED OF 2022-2023/Sl1

Amount

PART A

Dismantling of the existing not functioning pump motor set from the existing base by lifting the pump , motor seperately after disconnecting all othe hydrsulic pipe lines, valves, aal the existing electrical lines as needed as direction of EIC.

Supply and delivery at site 2 stage horizontal split casing centrifugal pump set capable of discharge against total head and mounted RCC base plate coupled with squirrel cage induction motor operated on 415V 3 split phase 10% , 3 phase 50 hz AC supply having speed 1475 rpm ( pump and motor design approved by the depertment ) with supply of all to complete the pump motor set. Description and parameters of the pump . Manufacturing Standerd - IS : 6595(part 1) & IS:5120 / Relevent IS Testing Standard : IS:9137(C) /Relevent IS Discharge Capacity (CMH) - 120 Total Head(MTR) - 70 Rated Speed - 1475 Pump Efficiency - 70 and above MOC of the Pump Pump Casing - CI, FG-260, IS:210 Impeller - BR IS 318 GR LTB2 Shaft - SS410 Shaft Sleeve- SS410 Type of packing - Gland Packing Base Plate- MS Fabircted Manufacturing Standerd - IS : 325 / Relevent IS for energy efficient motor Testing Standard : IS : 325 / Relevent IS for energy efficient motor Rating - 37KW / 50 HP Type - Horizontal foot mounted, solid shaft squirrel cage induction motor Voltage- 415V + 10% Frequency - 50 Hz + 5% No of phase - 3 Speed - 1500 (SYNC) Efficiency Class- IE-3 Duty- S1 Degree Of protection- IP55 Design Ambient Temporature- 50 Degree C Cooling- IC411 Acessories- Base frame , Coupling, coupling gourd, foundation Bolt (Make- Kirloskar/CG/WPIL) (MOC, Test Certificate, warranty certificate along with charcteristic curve to be produced at the time of delivery ) (Meterial should be supply at the time of delivery ) (All routine test to be performed in presence of EIC before delivery ).

Installation, testing and commissioning of new centrifugal pump, induction motor set on the existing base foundation including all pcc, rcc work with suction line, delivery line with all erection of materials, pipe support, enlearger, expansion joint,nut bolts, valve support as required to complete the job as per direction of EIC and IE rules to complete the net finishing to the whole installation. (Any item or accosseries not considerd in the specification but required to complete the installation and operation, with one month trail operation by engaging expart mechanic or existing operator as per requirment as IE rules upto the satisfaction of EIC. (No extra chrges shall be provided for this purpose )

Supply & delivery aand installation at site of composite panel for motor FASD starter suitable for pump motor mentioned in Sl no(2) with o/r relay (45-75A) ,volt meter, Amp meter, ASS, VSS, Pushbuttonswitch,trip indicator lamp, with single phase preventer, having coil voltage-380V suitable for 3 phase 440V supply. 50HP Make:- L&T/PHE Approved

Add GST @12%

COMBINE ENTERPRISES

PROGRESSIVE ENGINEERS CO OPERATIVE SOCIETY LIMITED