2059 PW M & R SR

Name of work: A&A to E.I. ,Ceiling Fan and Indoor Light Fittings in Spipa Admin Building at Rajkot .

Item Quantities estimated Item of work Tendered Rate Total amount

Item Quantities estimated Item of work Tendered Rate Total amount

No. but may be more or according to

In Figures In Word

Qty. Unit estiamted

Replacing Old & u/s by Point wiring for Light / Bell with 2-

1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 kV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length , in below type of pipe erected with

6A Modular type switch / bell push & accessories and earth

Rupees Five Hundred

continuity of following type, erected on PVC /

1 96.00 Pt. 539.34 ThirtyNine Paise

Metallic/Wooden box, single mounting base frame covered

ThirtyFour Only

with textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed. (a) with

medium class Rigid PVC pipe and accessories erected flushed

on wall/ceiling complete Cat. III

Light Point ( Bathroom , Toilet , Washarea ) Cat. III

Rupees Two Hundred

34.00 Pt. 269.67 SixtyNine Paise

SixtySeven Only

Replacing Old & u/s by Point wiring for FAN with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI

marked 1.1 kV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected

with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth Rupees Seven Hundred

2 55.00 Pt. continuity of following type erected on PVC / 765.58 SixtyFive Paise FiftyEight

Metallic/Wooden box, single mounting base frame covered Only

with textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected. with necessary ceiling rose

/ H.D.Connector as directed.. (a) with medium class Rigid

PVC pipe and accessories erected flushed on wall/ceiling

complete cat-III

Replacing Old & u/s by Point wiring for Individual Plug with

& earth wire of 1.5 sq.mm (Green) both are of ISI marked

kV grade FRLS PVC insulated multi strand copper wires up to

10 mtr length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Rupees Five Hundred

Metallic/Wooden box covered with appropriate front plate

3 5.00 Pt. 570.65 Seventy Paise SixtyFive

modules erected on / in wall / ceiling as per pipe erected with

following type of accessories. [I] For 6A Plug and 6 a switch

with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db

board (a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete cat-III

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.

Rupees Eight Hundred

Wire from mcb db board. (a) with medium class Rigid PVC

22.00 Pt. 853.45 FiftyThree Paise

pipe and accessories erected flushed on wall/ceiling complete

FourtyFive Only

Replacing Old & u/s by Point wiring for on board Looped Plug

with 6A Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered Rupees Three Hundred

with textured / metallic/white front plate modules erected on Nine Paise Six Only

/ in wall / ceiling with following type accessories Cat. III

Point wiring for Two Way Controlled Light Point with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI

marked 1.1 kV grade FRLS PVC insulated multi strand copper

wires erected in below type of pipe with 6A Modular type

switches and following type of accessories erected on PVC /

Rupees Six Hundred

Metallic/Wooden box, single mounting base frame covered

5 2.00 Pt. 681.75 EightyOne Paise

with textured / metallic/white front plate modules erected on /

SeventyFive Only

in wall / ceiling as per pipe erected. with necessary

batten/angle holder or ceiling rose or H.D.Connector as

directed..(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling complete Cat. III

Replacing Old & u/s by Providing following type of Modular

Type Accessories mounted with PVC / metallic/Wooden box,

single mounting base frame covered with textured / Rupees One Hundred

metallic/white front plate , modules erected with necessary Sixty Paise FiftyNine Only

connections as per site situation directed by Engineer In

charge.(8) Computer RJ-45 socket Cat.III

Item Quantities estimated Item of work Tendered Rate Total amount

Item Quantities estimated Item of work Tendered Rate Total amount

No. but may be more or according to

In Figures In Word

Qty. Unit estiamted

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

Rupees ThirtyThree Paise

7 317.00 Mtr. ceiling erected with necessary PVC fittings & Junction boxes 33.33

ThirtyThree Only

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed (b) 25 mm

Providing & erecting PVC Corrugated Flexible Conduit with

Rupees TwentyOne Paise

8 100.00 Mtr. required nos. of coupling, PVC bushes, Check-nuts etc. 21.21

complete of following sizes.(2) 25 mm

Replacing Old & u/s by Providing and erecting Mains with

kV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper Rupees One Hundred Four

conductor FRLS PVC insulated stranded wire of green colour Paise Three Only

for earth continuity of following size (A) With medium class

Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm

Replacing Old & u/s by providing and erecting Mains with

kV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on

Rupees Five Hundred

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

10 105.00 Mtr. 532.27 ThirtyTwo Paise

insulated stranded wire of green colour for earth continuity of

TwentySeven Only

following size (A) with medium class Rigid PVC pipe and

accessories (i) 4 wire 10 sq. mm

(use earth wire of 4 sq.mm )

Replacing Old & u/s by providing and erecting Mains with ISI

marked, 1.5kV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC insulated conforms

Rupees Eight Hundred

to IS 694, IEC - 227 erected in existing pipe of following size

11 4 Mtr. 837.29 ThirtySeven Paise

(Specifically for control panel, relays, power switchgears,

TwentyNine Only

motor starters & control wiring) with required size of copper

lugs, nuts and bolts if required.(k) One wire 70.00 sq. mm

(g) One wire 16.00 sq. mm Rupees One Hundred

20 Mtr. 177.76 SeventySeven Paise

SeventySix Only

(i) One wire 35.00 sq. mm Rupees Three Hundred

4 Mtr. 376.73 SeventySix Paise

SeventyThree Only

Replacing Old & u/s by Supplying & erecting approved make

Rupees FourtySeven Paise

12 792.00 Mtr. LAN cable of following size in existing pipe as per direction 47.47

FourtySeven Only

Replacing Old & u/s by Providing & erecting Switch board

for Computer or electric apparatus consisting of following

modular type accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame covered

Rupees One Thousand

with textured/metallic /white front plate,modules erected with

13 44.00 Ea 1133.22 One Hundred ThirtyThree

necessary connections as directed

Paise TwentyTwo Only

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III

Replacing Old & u/s by Decorative call bell Ting-tong box type Rupees SeventyOne Paise

250 volts complete erected SeventyOne Only

Replacing Old & u/s by Supplying and erecting LED indoor

fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. & corrosion

resistance with diffuser with company mark/name 160V to

270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K, Rupees Five Hundred

15 90.00 Ea. Luminaire efficacy> 85 lumens/watt ,LED 535.30 ThirtyFive Paise Thirty

LED driver efficiency > 85 % Only

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Tube Light with integral

driver (v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet

Supplying and erecting led lamps with following wattage

capacity of 220 to 240 voltage, minimum 15000 burning hours

life, 500 V in built-surge protection,Polycarbonate diffuser, Rupees One Hundred

16 25.00 Ea mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 188.87 EightyEight Paise

(A) LED Lamps integral type, with PC diffuser suitable LAMP EightySeven Only

holder (iii) 10 to 15 watts Cat-III

Item Quantities estimated Item of work Tendered Rate Total amount

Item Quantities estimated Item of work Tendered Rate Total amount

No. but may be more or according to

In Figures In Word

Qty. Unit estiamted

Providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 25 KA. at

415 V,having normal current rating up to 25 A to 100A. with Rupees Six Thousand

17 1.00 Ea Fixed thermal & magnetic release suitable to work on A.C. 6790.23 Seven Hundred Ninety

supply 50 Hz. with all internal connections, spreader tinned Paise TwentyThree Only

copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 35 KA. at

Rupees Seventeen

415 V. having Normal current rating 200A.with variable

Thousand Eight Hundred

18 1.00 Ea Thermal & magnetic release suitable to work on A.C.supply 50 17843.67

FourtyThree Paise

Hz. with all internal connections, spreader tinned copper &

SixtySeven Only

complete erected in existing 16 G.M.S.housing ICS=100% of

ICU only Cat III

Replacing Old & u/s by Supplying and erecting triple pole &

neutral 440V / 500V panel mounting Copper Busbars with four

equal Nos. of electrolyte bus having current density not more

than 1.6 Amp. / sq.mm (Rated current / cross section area) duly Rupees Three Thousand

19 0.50 Rn. Mtr wrapped with colour insulating tape for phase sequence of 3202.71 Two Hundred Two Paise

following current carrying capacity, erected with necessary bus SeventyOne Only

bar supports /insulators, main cable socket to each bar, erected

in existing cubical panel with necessary connections.(B)

Suitable for 200 Amp. capacity

Replacing Old & u/s by providing and erecting Miniature

circuit breaker single pole 6A to 25A suitable to operate on Rupees One Hundred

20 60.00 Ea 240 V A.C. system and having breaking capacity 10 KA to be 123.22 TwentyThree Paise

erected in existing box. confirming to IS 8828/1996 with ISI TwentyTwo Only

Replacing Old & u/s by Providing & erecting 415V MCB Four

Pole Switch for Lighting Load (B curve) having 10KA Rupees Three Hundred

breaking capacity & confirms to IS :8828 in existing box Six Paise Three Only

having following capacity (A) 6 to 32 Amp. Cat.III

Replacing Old & u/s by Providing & erecting 415 V MCB

Rupees Seven Hundred

Four Pole for Motor & Inductive Load (C Curve) having

22 10.00 Ea 736.29 ThirtySix Paise

10KA breaking capacity & confirms to IS :8828 in existing box

TwentyNine Only

having following capacity (b)40 Amp.cat-III

Replacing Old & u/s by Providing and erecting Sheet Steel

powder coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without Rupees Two Thousand

23 5.00 Ea MCB to house appropriate nos. of MCBs.(The DBs should be 2913.85 Nine Hundred Thirteen

used of same company of MCB to be used) suitable for (B) Paise EightyFive Only

three phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI) (b) sheet steel double

providing and erecting Approved make RCCBs conforming to

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on Rupees Two Thousand

24 15.00 Ea single phase 240 V,50Hz. having characteristic of quick action 2458.34 Four Hundred FiftyEight

& tripping with all advance feature & do not incorporate any Paise ThirtyFour Only

electronic component. for following Max. rating erected as

directed (ii) 40Amps. DP Cat. III

Providing and erecting Annealed bare Copper wire 4.064mm Rupees Seven Hundred

25 1.00 Kg to 1.626mm. 794.87 NinetyFour Paise

EightySeven Only

Supplying & erecting earth pit of minimum bore dia.150mm

size approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-

200 Micron galvanising, Inner pipe dia of 25 mm having 200-

250 Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate

including value of earth resistance of installation duly stamped

and signed by agency and officer Incharge has to ensure the

value of earthing resistane mentioned in test Certificate) &

having back filling compound of

Item Quantities estimated Item of work Tendered Rate Total amount

Item Quantities estimated Item of work Tendered Rate Total amount

No. but may be more or according to

In Figures In Word

Qty. Unit estiamted

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at

no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain Rupees Four Thousand

1.00 Ea moisture for long time Necessary test report must be submitted 4591.46 Five Hundred NinetyOne

by Agency. (a) For Electrical Installation up to 440V in normal Paise FourtySix Only

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Replacing Old & u/s by Providing & erecting weather proof,

dust & vermin proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above protection as

per approval from engineer incharge made from 14 SWG thick

CRC M.S. sheet for outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with necessary accesories

supporting angles/ flats channel including cutting, bending,

drilling, welding, riveting with internal partitions & cable alley

as per requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-aluminium strips,

rubber grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts, foundation

flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice board,necessary

ventilation,earthing strip complete.

The Panel shall be painted with epoxy powder coating. (The

rates excludes the cost of switchgears, bus bars, inter

connecting mains & Copper Aluminium strips, meters, Fuses

Rupees Fourteen

etc. The dimension shall be measured excluding base beams)

1.1025 Sq. Mtr 14902.55 Thousand Nine Hundred

The panel shall be supplied with following approved

Two Paise FiftyFive Only

manufacturers with following size(B) The standard companies

switch gear shall be used and only manufacturers at CPRI

approved factory (i) with 350mm depth

Providing , erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections complete

with cutting, welding, grinding & finishing duly painted with Rupees SeventySeven

one coat of red oxide with erection on site as per direction of Paise SeventySeven Only

engineer in charge with necessary grouting, cementing,

plastering & finishing complete. ( 40 Kg Per Panel = 1 * 40 )

Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for 1.1 kV. Rupees Five Hundred

29 5.00 Mtr. to be laid on wall with necessary clamps or in existing trench / 589.84 EightyNine Paise

pipe of following size of cables (E) 3 1/2 core 95 Sq. mm ( 50 EightyFour Only

Sq. mm 1/2 core)

Providing and, fixing heavy duty flange type brass double

compression type cable gland with rubber ring for PVC Rupees One Hundred

30 2.00 Ea insulated armoured cable complete with out going tails, 131.30 ThirtyOne Paise Thirty

insulating tape etc for following size of cables.(D) 3 & 1/2 Only

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

Rupees Fourty Paise

31 8.00 Ea pressure tool & connected to switchgear terminals with 40.40

brass/cadmium plated nut bolts in an approved manner. (F)

Solder less crimping type Copper lugs conforming to IS

suitable for cable of following size evenly crimped with high

Rupees Twelve Paise

32 20.00 Ea pressure tool & connected to switchgear terminals with 12.12

brass/cadmium plated nut bolts in an approved manner. (C)

Replacing Old & u/s by Providing & erecting Approved make

Power Saving 45 - 50 Watt Ceiling Fan with double ball

Rupees One Thousand

bearing ISI mark with Condenser 230 volt A.C. 50 Hz

33 55.00 Ea 1948.29 Nine Hundred FourtyEight

mm sweep complete having 3blades with aluminium blades

Paise TwentyNine Only

with , canopy & 30 cm. down rod erected with earthing.(Make

shall be approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium

Class M.S. Pipe down rod erected duly painted for fan Rupees One Hundred

complete with proper insulation without leakage and earthing. Eight Paise Seven Only

Supplying & erecting approved make low noise decorative Rupees One Thousand

35 10.00 Ea exhaust fan having square frame ABS body with inbuilt lowers 1366.53 Three Hundred SixtySix

& square frame. 200mm with 1350RPM Cat.II Paise FiftyThree Only

Item Quantities estimated Item of work Tendered Rate Total amount

Item Quantities estimated Item of work Tendered Rate Total amount

No. but may be more or according to

In Figures In Word

Qty. Unit estiamted

Supplying and erecting approved make panel mounting type

Digital Voltmeter having 3 digits LED display, 0 to 750 AC Rupees One Thousand

36 1.00 Ea Volts range erected on existing panel board with all 1275.63 Two Hundred SeventyFive

connection, wiring etc .with manufacturers calibration Paise SixtyThree Only

Supplying and erecting approved make panel mounting type

Digital Ammeter having 3 digits LED display, external CT

Rupees One Thousand

operated, calibrated for 0 to 1000 Amps suitable to operate on

37 1.00 Ea 1558.43 Five Hundred FiftyEight

500 Volt AC , erected on existing panel board with all

Paise FourtyThree Only

connection, wiring etc .with manufacturers calibration

Supplying and erecting Ammeter / Voltmeter selector switch Rupees Three Hundred

38 2.00 Ea for 3 phase AC Supply 500 V on existing panel board with 317.14 Seventeen Paise Fourteen

necessary connections. Only

Providing & erecting L.T. Current Transformer with bar

Rupees Two Hundred

primary 50/5 to 1000/5 ratio 15 VA burden erected in existing

39 3.00 Ea 274.72 SeventyFour Paise

CRCA box duly secured with insulating materials connected to

SeventyTwo Only

Supplying and erecting approved make suitable panel indicator

Rupees FourtyThree Paise

40 3.00 Ea LED type lamp, lens cover, complete erected with necessary 43.43

FourtyThree Only

Rupees Six Lakh EightyEight Thousand Eight Hundred SeventySeven Paise FourtySix Only

Note:- The Credit of dismentalled materials for Rs.22841.00 shall be recovered from the First R.A. bill payable to the contrator and there after the

dismentalled materials shall be the property of the contractor.

I/We am/are willing to carry out the work at__________________% above/below (in figures)_____________________________________percent Above / below (in

words) the estimated rates mentioned above amount of my\our tender works out as under :-

Estimated amount put to Tender Rs. _________

Deduct________% below Rs. _________

Net Amount Rs. _________

Estimated amount put to Tender Rs. _________

Net Amount Rs. _________

A I/We hereby declare that I/we have visited the site and fully acquainted my self / our selves with the local situation regarding material,labour and

other factors pertaining to the work before submitting this tender.

B I/We hereby declare that I/we carefully studied the conditions of contract, detailed technical specifications and other tender documents of this

work and agree to execute the same accordingly.

C Any Excess in Tender Item/Extra Item if Needs to be Execute. Contractors has to carry out work on the instruction of Competant Authority on

Tender Submitted rate,No Excuse will be Accepted.Hence Contractor are Requested to quote the rate considering this condition.

D Contractor are requested to quote the Tender by considering that payment will be made after availibility of grant.Contractor has to start the work

immediately after issue of Work Order and as per instruction of Engineer-in-Charge irrespective of availibility of grant.

E "This estimate has been prepared on the new SOR wich is exclusive of GST hence GST additional will be paid to the agency as per existing

(Signature of the Contractor) Deputy Executive Engineer

Electrical R&B Sub Division

Executive Engineer

Electrical R&B Division

Note 1 Please strike out whichever is not applicable.

2 In the case of tendered amount being quoted incorrectly the quoted pered percentage Below/Above will be considered as final.