30/EET/BSNL/TVM/2024-25

Amount

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing :

(a) 1:2:4 (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

(b) 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources).

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in superstructure above plinth level up to floor V level.

(a) Cement mortar 1:4 (1 cement : 4 coarse sand)

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.ird course of half brick masonry.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer-in-charge

a) Extruded section profile size 42x50 mm

Providing and fixing to existing door frames.

a) 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).

Providing and laying Ceramic anti-skid floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete.

Providing and fixing unplasticised Rigid PVC pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,

(a) 75 mm outer dia

(b) 110 mm outer dia

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

a) Hot finished welded type tubes.

(Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

15 mm cement plaster on the rough side of single or half brick wall of mix :

(a) 1:4 (1 cement: 4 fine sand)

12 mm cement plaster of mix :

(a) 1:4 (1 cement: 4 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

(a) Two coats

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

(a) Two or more coats on new work.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.

(a) With cement mortar 1:4 (1 cement : 4 fine sand).

Renewing glass panes and refixing existing wooden fillets / aluminium beading:

(a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/rubbish to the nearest municipal dumping ground, all complete as per directions of Engineer-In-Charge.

(a) For door/ window/ clerestory window.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :

(a) W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

(a) Semi rigid pipe (i) 32 mm dia

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board

(a) 610x510 mm bowl depth 200 mm.

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :

(a) Flat back wash basin of size 550x400 mm.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

a) Rectangular shape 453x357 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall

a) 20 mm nominal outer dia. Pipes.

b) 25 mm nominal outer dia. Pipes.

Providing and fixing C.P. brass stop cock of standard design and of approved make conforming to IS:8931.

a) 15mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions :

a)45 cm length i) 15 mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:

(a) 15 mm nominal bore.

Providing and fixing PTMT grating of approved quality and colour.

a) Circular type. i) 100 mm nominal dia.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :

(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.

(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.

(The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.)

Providing and fixing PVC trap of self cleansing design with stainless steel screwed down or hinged grating with or without vent arm couple including cost of cutting and making good the walls and floors

(a) 100mm inlet and 75/100 mm outlet

Providing and fixing CP health faucet of approved make, including necessary connections etc all complete

Providing and fixing premium quality Crome plated brass pillar cock of Parry ware or equivalent of approved quality to wash basin including cost of removing the damaged item all complete as directed by the engineer in charge,

(a) 15 mm nominal bore.

Providing and fixing good quality C.P. brass waste coupling of standard pattern at wash basin and stainlees steel sink all completeas per direction of the Engineer-in-charge.

a) 32 mm dia

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories conforming to IS: 14735 for unplasticised rigid PVC soil, waste and vent pipes including jointing with elastomeric seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion/ jointing with solvent cement etc. complete.

(a) Plain bend of required degree

(i) 110 mm or nearest dia

(ii) 75 mm or nearest dia

(b) Bend with access door of required degree

(i) 110 mm or nearest dia

(ii) 75 mm or nearest dia

(c) Tee with access door

(i) 110 mm or nearest dia

(ii) 75 mm or nearest dia

Providing and fixing good quality CPVC valve (ball type) to the delevery line all complete as per direction of the Engineer-in-charge.

a) 20 mm dia

b) 25 mm dia

Providing and fixing Polyvinyl Chloride (PVC) pipes, including all PVC plain fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

a) 32 mm nominal outer dia. Pipes.

Fixing Aluminium partition with available aluminium sections in position as directed by the Engineer in charge including fixing with available glass, 12mm thick particle board on partition with necessary CP brass/Stainless steel screws and fixing with available clips, EDPM rubber/neoprene gasket etc.complete.

Providing and fixing Aluminium glazed sliding window using 2 track anodised / power coated aluminium profile section for outer frame and corrosponding sliding shutter frame of anodised / power coated aluminium profile section with 5mm thick plain glass and necessary rubber beeding with necessary roller and locking handles all complete as directed by the engineer incharge

Repairs and leveling the false ceiling ( Area about 150 Sqm) of tile size 595x595 mm suspended on metal grid by adjusting the suspendender from ceiling using available or new GI wire of approved guage and clamps including aligning the tiles and light fittings to give a neat look all complete for all heights as cost includes replacing missing tiles to be brought from near by BSNL bldgs. all per direction of Engineer-in-charge.

Repairs to wooden window shutter including removing the shutter if necessary changing the damaged wooden member or securing same using mild steel clamps and screws and refixing the same using available / new hinges all complete this is including the cost of necessary scaffolding were needed all as per direction of Engineer-in-charge

Supplying of skilled / unskilled laboures for carrying out miscellaneous and unpresedented works

a) Coolie/Beldar

a) Carpenter

a )Plumber