COMPLETION OF VELUR GRAMAPANCHAYATH OFFICE BUILDING

Amount

PANCHAYATH BUILDING

17.2.2:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked black solid plastic seat and lid

17.13.2:Providing and fixing white vitreous china water closet squatting pan ( Indian type):Orissa pattern W.C. pan of size 580x440 mm

17.7.2:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap

18.15.2:Providing and fixing brass bib cock of approved quality :20 mm nominal bore

50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

17.72:Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms

18.65:Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fittings arrangements, weighing not less than 106 gms.

OD52978/2025-2026:Supplying and fixing PVC tap

18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

50.18.9.15.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 6 Kgf/cm2 - External work - Exposed on wall

50.18.9.13.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall

50.18.9.14.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10 Kgf/cm2 - External work- Exposed on wall

OD53191/2025-2026:providing and fixing TEMPEED GLASS DOORS min 12 mm thickness or nearest available at overall door portion area opening 3*3m including DOUBLE SWING DOORs including neccessory outfits and fixed glass areas along the periphery with neccessory stainless steel brackets,glass connectors,door handles.hinges,bottom door locks and double action hydraulic floor spring with stainless steel cover plate,etc complete as per the archutectural drawing and directions of enginner-in-charge

OD87175/2025-2026:Providing and fixing PVC DOOR WITH FRAME complete as per manufactures specification and direction of engineer-in-charge (for W.C and bathroom door frame and shutter)

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

OD53238/2025-2026:supplyying and fixing at site ALUMINUM COMPOSITE PANELS of alucobound,durabuild or <br>equivalent make and approved colour certified for exterior applications,thickness 3 mm,with 28 ro 30 microns <br>of PVDF coating confirming t ASTM standard on the top aluminum skin of 0.25 mm and with a botom <br>single recycled low density polythylene material.The panels shall be cut to sizes of required grid<br>dimensions in line with the site conditions.The panels shall be fixed on the prefabrictaed frame work using <br>38 mm *25 mm *1 mm aluminium extruded sections of approved make,joined horizontally and vertically <br>using standard cleats and fastners.The gap of formed between the panels shall be seated with silicones <br>ealents of low coring grade 789. The rate inclusive of cost and conveyance of all materials,lead,liftand<br>labour for erection, hire charges for scaffolding etc complete.

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

51.2.3:Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade

16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

10.5.1:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces

10.6.3:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick to cover

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD53239/2025-2026:Roofing with G.I hard colour powder coated trafford sheets 0.35 mm thick of available thickness with overlap of 150mm at ends and GI hooks or crank GI bolts & nuts including plain washers and bitumen washers etc. complete

OD87861/2025-2026:Supplying and fixing in position stainless-steel letters in Malayalam/ English of size 35 to 45 cm as per design including cost of all fitting etc. (cost of board and frame work shall be paid separately)

KHALID KURIKKAL (BID ID -2233548)

Bidder Name

Ameer OM

KHALID KURIKKAL