SPECIAL REPAIR TO BLIDG NO P-1 (HAWKSDALE A AND B AND MES IB AT AR AND RC NAINITAL UNDER GE RANIKHET

Amount

BOQ( Sch 'A') B/R Portion Taking down cement plaster from wall/ceiliing on brick / stone masonry surface of any description including racking out joints, hacking for key scrubbing down with water etc. complete all as specified and directed.

Demolition of pre-cast PCC block walling / brick work or stone / boulder masonry including all qoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.

Material & Labour for pre-cast cement concrete 1:3:6, type C1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

Material & labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 and finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for 15mm thick cement plaster in CM (1:4) on stone masonary surface or other than fair faces of brick work using WPC where ever required as per manufacturerer's instructions and finishing the surface even and smooth (without using extra cement) complete all as specified and directed. NOTE -WPC shall be measured and paid separetely.

Supply only WPC complete all as specified and directed.

Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation etc. or for shafts wells, cesspits, manholes etc. n.exc. 10 Sqm on plan and n.exc. 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading ,levelling, watering and well ramming in layers not exceeding 25 cm in hard/ dense soil complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 250 m but not exceeding 500m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified and directed.

Material & Labour for plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling mass concrete complete all as specified and directed.

Material & Labour for hard core of broken stone or boulders of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Material & Labour for 100mm thick cement concrete 1:2:4 type B-2 (using 40mm graded stone agg) as in flooring/ hard standing and finishing the surfaces of concrete topping even and smooth without using extra cement complete all as specified and directed.

Material & labour walling of random rubble masonary, uncoursed well bonded and solidly hearted built in cement mortar 1:4 complete all as specified and directed.

Material and labour Flush pointing to random rubble masonary, uncoursed or brought upto courses in cement mortar 1:3 complete all as specified.

Material and labour for providing cement concrete 1:2:4 type B-I using 20mm graded stone aggregate in roof kerb or mud stops, lintel upto 1.5m clear span , cills, steps, seismic and other similar bands, plinth courses, string courses lacing courses, parapets and railing upto 60 cm in height , coping kneelers, apex stone, bed plates water tough and the like including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

Dismantling floor, hearth , wall tiling including taking down plastering in cement mortor removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material & Labour Granite ( of any type) tiles 20mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over & including bedding layer 15 mm thick in CM 1:6 including grinding and polishing complete all as specified and directed

Material & Labour Granite ( of any type) tiles 20mm thick, machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over & including screed bedding layer 10 mm thick in CM 1:3 including grinding and polishing complete all as specified and directed

Material & Labour for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed

Material & labour for Joint free Endura tiles 9 to 10mm thick ( square/rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile over and including screed bed 20 mm thick in cement mortar 1:6complete all as specified and as directed.

Material & labour for Premium quality Non skid ceramic tiles 7 to 8mm thick ( square/rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile over and including screed bed 15 mm thick in cement mortar 1:6complete all as specified and as directed.

Material & labour for Premium quality Glazed ceramic colour tiles of size 350x250x7mm/450x350x7mm thick fixed as in vertical surface such as skirting/ dado etc, set and jointed in neat cement slurry and pointed with white cement with colour pigment to match over and including 10mm thick rendering/ screed bed in CM 1:3 complete all as specified and directed.

Material and labour for 75 mm thick cement concrete 1:3:6, type C-1,(using 20mm graded stone aggregate) as in plinth protection/ floor finished even and fair without using extra cement complete all as speciified.

Demolition of PCC of any description in ground floor and paving not exc 15 cm thick ( below or above ground level) and disposal of unserviceable materials, debris and rubish to a distance not exc 50m as directed by Engineer-in-Charge complete all as specified.

Taking down chowkats or frames with shutter n.exc 1.50sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames with shutter exc 1.50 sqm but n.exc 4.00sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but not exc 2 Sqm each complete all as specified and directed.

Supply & fixing 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

Supply & fixing 35mm thick plain, framed 2nd class hard wood panelled shutter (any no of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

Supply & Fixing 35mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, guage etc, (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, guage etc, size of members of shutters as specified in MES SSR Part-I, Section 8, Clause 8.24 (a) complete all as specified and directed.

Preparing surfaces of wood and wood based material new or old , and treating ends of posts, backs of chowkats, etc, area tarred exc 0.1 sq.m but n exc 0.5 sq.m each with tar or coal tar black paint complete all as specified.

Preparing surfaces of steel and iron work new or old , and treating small articles such as stop, covers, gully gratings, hold fasts, , etc, area tarred n exc 0.1 sq.m each with tar or coal tar black paint complete all as specified.

Supplying and Fixing 300 mm size, aluminium alloy,anodized sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheets or extruded section and fixing of bolts and sliding bolts of extruded section complete all as specified.

Supply & fixing aluminium anodized barrel tower bolts of extruded section length of bolts 200mm complete all as specified and directed.

Supply & fixing extruded aluminium handle, fabricated type anodized 150mm size complete all as specified and directed.

Supply & fixing butt hinges heavy weight cold rolled mild steel of 100mm long complete all as specified and directed.

Dismatling boarding, any description , fixed in any position with nails complete all as specified and directed.

Supply & fixing 2nd class hard wood plain fillets, square, rectangular or triangular in section , clean sawn, area exc 13 sqcm but not exc 25 sqcm secured with nails or brads complete all as directed.

Supply & fixing 2nd class hard wood plain fillets, square, rectangular or triangular in section , clean sawn, area exc 6 sqcm but not exc 13 sqcm secured with nails or brads complete all as directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position framed work complete all as specified and directed.

Material & labour for second class hard wood in scantling, column, beam, arches, vertical post and similar work wrought timber framed work complete all as specified and directed.

Fixing only second class hard wood scantling wrought timber framed work complete all as specified and directed. (Note : Old scantling retrieved from item No 40 shall be reused.)

Supply & Fixing 25 mm thick 2nd class hard wood (Sal) boarding planed one side with butt joints and fixed with nails as in roofing and skirting complete all as specified and directed

Fixing only boarding any description and 25 mm thickness with and including all necessary fixing, arrangement in any situation complete all as specified and directed. (Note : Old boarding retrieved from item No 37 shall be reused.)

Supply & Fixing 40 mm thick 2nd class hard wood (Sal) boarding planed one side with butt joints and fixed with nails as in flooring and skirting complete all as specified and directed

Supply & fixing in repairs laminated flooring 8.3 mm thick hard board planks make BWG Crona, hampshire, Oak both side laminated with decorative surface of make FD spaze, design No. 1890 or its equivalent approved laid above the thermoplastic sheet as in flooring complete all as specified and directed.

Material & labour flat iron bands, straps, supports, clamps, hold fasts, wall ties, hooks for hanging fans and other similar small steel article confirming to Fe-290 grade-E165 with and including necessary nut-bolts, washers, screws etc. as required complete all as specified and directed.

Material and labour for cleaning & preparing old treated wooden surfaces of any description and girth, not otherwise described and treated with two coats of creosote complete all as specified and directed.

Dismentaling of wall and ceilling boards (fiber, pulp, insulation etc.) or insulation board / stabs / blankets, any thickness including cover fillet complete all as specified and directed.

Supply & fixing GI frame work powder coated for seamless/made in panels (605 x 605 mm) ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre complete all as specified and directed.

Material and labour 4 mm thick Non asbestos fibre cement building board (E-board classic) fixed or laid/inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.

Supply & fixing Solid PVC wall lining consisting of 5mm thick single prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and directed.

Supply & fixing 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

Supply & fixing powder coated anodised aluminium frame for doors, window, ventilators, partition with one or more rebats including jointing cleats for fixing etc complete all as specified and directed.

Supply & fixing Anodised aluminium powder coating window and ventilators shutters, side hung type withoutsash bars, aluminium sections weighing 0.55 kg/m including necessary jointing cleats, glazing clips rubber packing anodised aluminium snap beading screw, anodised aluminium fittings such as peg stay 150mm (1no) hinge type B-21 100mm long ( 2 no) suitable handle (1no) complete all as specified and directed.

Supply & fixing Anodised aluminium door shutters powder coating of any colour ( thickness or powder coating not less than 50 micron) aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed.

Material and Labour for external teak wood lipping, 12mm wide, 6mm thick fixed with nails complete complete all as specified and directed.

Supply and fixing in repairs Ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed.

Supply and fixing in repairs 40mm dia cup board knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

Supply & fixing in repairs Contnuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) 30mm complete all as specified and directed.

Material & labour in repair 12mm thick plywood, grade BWP, type BB fixed with screws to timber frame work complete all as specified and directed

Material & labour Decorative laminate type1, 0.9mm thick of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer,s instruction complete all as specified and directed

Supply & fixing in repars stainless steel wire cloth, 0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

Supply & fixing frosted or obscured glass sheet 4mm thick of ordinary quality and glazing with oil putty in square n exc 0.50sqm in each pane complete all as specified.

Supply & fixing 1.4mm dia galvanised steel wire netting 25mm X 25mm mesh size , made up into matteresses or cages, lapped , wired and laid in position ,incl fixed with tinned tacks of wire staples complete all as specified.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

Supply & Fixing rolled mild steel framed work such as in main and cross beam , purlin , rafters, posts, coloumn pole, ladders,framed balusters, walk way,railing,frame work of water tank and similar work such as purlin, truss, square tube etc confirming to Fe-290-w (Gde 165) complete all as specified and directed.

All as per Item No 67 here-in-before but errection and fixing only ( except material) Note: Old material retrieved from srl item No 66 will be reused.

Supply & Fixing rolled mild steel in plates ( plain or chequered ) channels, square cut or notched ( ordinary and counter suk ) forming holes, without any attachment tube etc confirming to Fe-410-w (Gde 250) quality 'A'complete all as specified and directed.

Material and labour for Shoring and strutting timbers including use and waste of timber, putting together , errecting, striking, and removing together with all necessary bolts ( including boring holes of same), dogs clamps, spikes, nails, wedges etc complete and maintaining in position untill no longer required complete all as specified.

Material and labour for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2( 1 cement : 2 coarse sand ) to match with existing floors complete all as specified.

Material and labour for At points of contact of wood work by chemical emulsion ( in oil or kerosene based solution ) @ 0.5 litre/ hole by drilling 6mm dia holes at a downward angles of 45 degree at 150mm centre to centre and sealing the same complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames incl punching or drilling out glazing pins/spring clip and providing and fixing new ones complete all as specified and directed.

Supply & fixing Sheet glass 4mm thick, ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and directed.

Supply & fixing tinted glass sheet 5.5mm thick , ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

Material & Labour for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified and directed.

All as per Item No.77 here–in–before, but for 20mm dia (Bore) complete all as specified and directed.

All as per Item No. 77 here–in–before, but for 25mm dia (Bore) complete all as specified and directed.

Supply and fixing Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

All as per Item No 80 here-in-before but fixing only with and including new fittings Note: Old Serviceable GI pipe retrievd from srl item No 77 will be reused.

Supply and fixing Steel Water Tubing 20mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

All as per Item No 82 here-in-before but fixing only with and including new fittings Note: Old Serviceable GI pipe retrievd from srl item No 78 will be reused.

Supply and fixing Steel Water Tubing 25mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

Dismantling water tanks of any description, capacity exceeding 500 litres but not exceeding 1000 liters complete all as specified and directed.

Supply & Fixing rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 5000 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

Supply & Fixing rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 1000 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

Supply & fixing in repair 15mm dia ball brass valves, high pressure with epolythene float and flynut complete, screwed for iron pipe or brass ferrule of complete all as specified and directed.

Supply & fixing in repair 25mm dia ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule of complete all as specified and directed.

Taking down soil/ waste and rain water pipes ( any size or pattern) including all fittings complete all as specified and directed.

Supply and Fixing 110 mm bore PVC (SWR) Soil,waste & vent pipe single socketed in any length with rubber ring joints fixed to walls or in floor with and including clamps, nut bolts etc complete all as specified.

Supply and Fixing PVC (SWR) bends any radius 110 mm bore with access door complete all as specified.

Supply and Fixing PVC (SWR) 110 mm bore branch piece , single ( single Y) equal or unequal with access door complete all as specified.

Supply and Fixing PVC (SWR) 110 mm bore junction single, ( single T) equal or unequal with access door complete all as specified.

Supply and Fixing PVC (SWR) 110 mm bore vent cowl complete all as specified.

Supply and Fixing PVC (SWR) 110/110 mm bore 'P' trap complete all as specified.

Supply & fixing in repair PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and directed.

Supply & fixing PVC waste pipe 32 mm dia over all length of pipe 90cm complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and directed

Supply & fixing of 0.80 mm thick plain galvanised iron steel (PGI) sheeting including cover gola of same thickness PGI sheet as in Nainital pattern roofing fixed with flat iron clip of size 20x3 mm with grade of zinc coating @ 120 gram per sqm on both sides complete all as specified and directed.

Supply & fixing plain, galvanized, mild steel sheeting 0.80mm thick , as in ridges, valley gutters, drip and straight flashings( length and girth as fixed ) with grade of zinc coating @ 120 gram per sqm on both sides complete all as specified and directed.

Supply & fixing in repairs 150 mm dia galvanished mild sheet eaves, gutter, made of 1 mm thick sheet having zinc coating @ 120 gram per sqm inclusive of both sides, half round with rounded edges complete all as specified and directed

Supply & fixing in repairs 150 mm dia galvanished mild sheet angles ( internal or external) or nozzle piece ( outlets) made of 1 mm thick sheet having zinc coating @ 120 gram per sqm inclusive of both sides, complete all as specified and directed

Supply & fixing in repairs 8mm thick poly carbonate sheet side lap fixed with aluminium lap jointers of suitable size to joint the poly carbonate sheet together with coach screw and washer in roof, wall etc complete all as specified and directed

Taking down old unserviceable bath tub complete all as specified and directed.

Taking down old unserviceable shower panel including connected items complete all as specified and directed.

Supply and fixing for Shower pannel with two jets, one head shower, one hand shower with black mirror finished size 1500x 200 complete all as specified and directed. Make:- Jaquar cat part No JPL-BLK-GO842JAX or equivalent cat part in make Marc, Hindware, Perryware, Cera as approved.

Supply and fixing Angular stop cock 15mm bore complete all as specified and directed. Make:- Jaquar cat part No OPP-15053PM or equivalent cat part in make Marc, Hindware, Perryware, Cera as approved.

Supply and fixing Single lever extended basin mixer with 450mm long braided hoses complete all as specified and directed. Make:- Jaquar cat part No OPP-15011BPM or equivalent cat part in make Marc, Hindware, Perryware, Cera as approved.

Supply and fixing Single lever wall mixer with provision hand shower complete all as specified and directed. Make:- Jaquar cat part No OPP-15119PM or equivalent cat part in make Marc, Hindware, Perryware, Cera as approved.

Supply and fixing Hand shower 27mmx27mm square shape single flow complete all as specified and directed. Make:- Jaquar cat part No HSH-35537 or equivalent cat part in make Marc, Hindware, Perryware, Cera as approved.

Supply and fixing EWC with fittints/ fixtures complete all as specified and directed. Make:- Jaquar cat part No SLS-WHT-6855S/P or equivalent cat part in make Marc, Hindware, Perryware, Cera as approved.

Supply and fixing Table top basin complete all as specified and directed. Make:- Jaquar cat part No JDS-WHT-25935 or equivalent cat part in make Marc, Hindware, Perryware, Cera as approved.

Supply and fixing waste coupling 32mm size full thread with 130mm length complete all as specified and directed. Make:- Jaquar cat part No ALD-705L130 or equivalent cat part in make Marc, Hindware, Perryware, Cera as approved.

Supply and fixing Towel rack with lower hangers 24" long complete all as specified and directed. Make:- Jaquar cat part No AHS-1581H or equivalent cat part in make Marc, Hindware, Perryware, Cera as approved.

Supply and fixing Paper Holder with flap ( stainless steel) complete all as specified and directed. Make:- Jaquar cat part No ACN-1153S or equivalent cat part in make Marc, Hindware, Perryware, Cera as approved.

Supply and fixing Stainless steel peg set of three hooks each fixed with screws complete all as specified and directed.

Supply and fixing Towel ring with round flange complete all as specified and directed. Make:- Jaquar cat part No ACN-1121BN or equivalent cat part in make Marc, Hindware, Perryware, Cera as approved.

Supply and fixing Corner glass shelf with bracket complete all as specified and directed. Make:- Jaquar cat part No ACN-1173 or equivalent cat part in make Marc, Hindware, Perryware, Cera as approved.

Supply and fixing Shower basket small complete all as specified and directed. Make:- Jaquar cat part No ACN-1177N or equivalent cat part in make Marc, Hindware, Perryware, Cera as approved.

Supply and fixing Hand shower ( Health faucet) with 8mm dia, 1.2 metre long flexible tube and wall hook with complete fiitings complete all as specified and directed. Make:- Jaquar cat part No ALD-565 or equivalent cat part in make Marc, Hindware, Perryware, Cera as approved.

Taking down and refixing toughned glass shower partition with built in door including supply & fixing new worn out SS fittings complete all as specified and directed.

Taking down looking mirror and refixing the same complete all as specified and directed.

Taking downexisting Aluminium partition with sliding doors complete all as specified and directed.

Supply & fixing 10mm thick toughned glass shower with built in door including all SS fittings complete all as specified and directed.

Material & Labour for complete removal of existing treatment & applying a layer of wall care putty 2mm thick average on wall surfaces including cornics etc for proper levelling of plaster and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and directed.

Material & Labour for preparation of new or previously untreated wooden surfaces of any description,not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material & Labour for complete removal of existing synthetic enamel paint by chemical or other means of old wood and wood based surface of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of new steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified.

Material and labour for preparation of old painted brick,concrete, chequered concrete tile, cement or plastered surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of plastic emulsion paint complete all as specified and as directed.

Material & Labour for one or more coats of French polish as required over a coat of wood filler on surfaces of any description, width or girth including cleaning and preparing the old treated wooden surface complete all as specified and directed

Supply & fixing mild steel bolts ( machine made ) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each srewed end to be fitted with washers and one hexagonal or square nut , exc 15cm but n exc 22.5cm long, diameter of neck exc 11 to 15 complete all as specified and directed.

Supply & fixing mild steel bolts ( machine made ) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each srewed end to be fitted with washers and one hexagonal or square nut , exc 22.5cm but n exc 30cm long, diameter of neck exc 16 to 20 complete all as specified and directed.

E/M WORKS Taking down carefully aluminium/copper wiring of any size (for light, fan, socket or power etc complete) ( fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights etc to be measured and paid separately) and making good disturbed surfaces of wall, roof etc to match with existing surface.

Supply & Fixing point wiring for one light point/ fan/ bell (independent) point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia ) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed (Note:- wiring shall be done in colour coding as directed by Engineer in charge.

All as per item No.135herein before but one socket outlet 5 pin 5 amps controlled by one switch on same board.

All as per item No 135 herein before but wiring with 2.5sqmm copper wire (FRLS) PVC and 2.5 sqmm earth wire for socket outlet 5 amps or AC socket on independent board.

All as per item No 135 herein before but wiring with 4.00sqmm copper wire (FRLS) PVC and 4.00 sqmm earth wire for socket outlet 6 pin 16 amps or AC socket on independent board.

Supply and Fixing switch modular 1 way 6 Amp ,1 module complete all as specified and directed.

Supply and Fixing switch modular 1 way 16 Amp ,1 module complete all as specified and directed.

Supply and Fixing Modular socket , 6 Amp -2/3 pin combined 2 Module complete all as specified and directed.

Supply and Fixing Modular socket , 6 /16 Amp -2/3 pin combined 2 Module. complete all as specified and directed.

Supply and Fixing Modular Bell Push 6 A 01 Module complete all as specified and directed.

Supply and Fixing Modular white cover plate with frame 2 Module fixing on existing boxes complete all as specified and directed.

Supply and Fixing Modular white cover plate with frame 3 Module fixing on existing boxes complete all as specified and directed.

Supply and Fixing Modular white cover plate with frame 4 Module fixing on existing boxes complete all as specified and directed.

Supply and Fixing Modular white cover plate with frame 6 Module fixing on existing boxes complete all as specified and directed.

Supply and Fixing Modular white cover plate with frame 8 Module fixing on existing boxes complete all as specified and directed.

Supply & Fixing call bell, AC 230 volts, single pole complete all as specified and directed .

Supply & Fixing anodised rust proof 18 SWG MS box, flush type of size 75mmx105mmx50mm deep ( 1-2 Module) ( to be of same make as modular switches and sockets) to be recessed in wall/ gypsum partition complete all as specified and directed .

Supply & Fixing anodised rust proof 18 SWG MS box, flush type of size 75mmx105mmx50mm deep ( 3Module) ( to be of same make as modular switches and sockets) to be recessed in wall/ gypsum partition complete all as specified and directed .

Supply & Fixing anodised rust proof 18 SWG MS box, flush type of size 75mmx105mmx50mm deep ( 4Module) ( to be of same make as modular switches and sockets) to be recessed in wall/ gypsum partition complete all as specified and directed .

Supply & Fixing anodised rust proof 18 SWG MS box, flush type of size 75mmx210mmx50mm deep ( 6-8 Module) ( to be of same make as modular switches and sockets) to be recessed in wall/ gypsum partition complete all as specified and directed .

Supply & Fixing ceiling rose, PVC/ Poly carbonate, isolated body three terminal complete all as specified and directed.

supply & Fixing lamp holder PVC insulated body with back plate for angle/battern fitting complete all as specified and directed

Supply & Fixing in repair LED light fittings 1x20 W ( warm/milky white) as required on site), 220 V, AC decorative box type with driver, holder including LED tybe light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and life of tube light not less than 50,000 hours complete all as specified and directed. Note:- Contractor shall submit 2 year warrenty of material from manufracturer alongwith purchase voucher.

Supply & Fixing LED luminaire 600mmx 600mm, 36 watt ( warm/milky white 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling , life of tube light not less than 50, 000 hours including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed. Note:- Contractor shall submit 2 year warrenty of material from manufracturer alongwith purchase voucher.

Supply & Fixing in repair 240 V, 10 KA 'B' curve miniature circiut breaker ( MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply & Fixing in repair 240 V, 10 KA 'C' curve miniature circiut breaker ( MCB) of single poles neutral ( SPN) and current carrying capacity 32 AMP, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing of sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 4 ways with 200 Amp rated bus bar, 240 volts including blanking plates fixed sunk / flush to the wall or niche including taking down uderviceable DB with teak wood board and making good the disturbed surface to match with existing surface complete all as specified and directed.

Supply and fixing of sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 8 ways with 200 Amp rated bus bar, 240 volts including blanking plates fixed sunk / flush to the wall or niche including taking down uderviceable DB with teak wood board and making good the disturbed surface to match with existing surface complete all as specified and directed.

Supply and fixing of sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 12 ways with 200 Amp rated bus bar, 240 volts including blanking plates fixed sunk / flush to the wall or niche including taking down uderviceable DB with teak wood board and making good the disturbed surface to match with existing surface complete all as specified and directed.

Material and labour for Sub main wiring with 2 run of 10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit ( ISI marked) Heavy grade, 20 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoted rates. 2. Two run of 10 sqmm, one run of 10sqmm and one run of PVC conduit will be measured as one unit ie one running metre”

Supply & Fixing in repair water heater storage type electric supplied and installed complete of capacity 25 litre including making connection with industrial socket, ultra thick SS inner tank of superior 304 grade, fire retardant ISI mark supply cord, rust & shock proof ABS body, compact & easy to install and proper hanging on nut bolts washers grouted on wall and PVC pipe for connection of hot and cold water complete all as specified and directed.

Taking down existing electric fittings and refixing complete all as specified and directed.

Taking down existing Chandeliers and refixing complete all as specified and directed.

Material and labour for earthing complete with galvanised earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate), duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C1, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost to Govt

Prem singh kuwarbi and co

Builders Harpal

Prabhat Construction

M/S Rajeev Sharma and Co.

Jain Engineering Works

Amit Engineering

M/S G. S. MATIYANI AND SONS

M/s Arihant Builders