Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.3 LAccepted-Finance | ₹2.3 L | L1 | Accepted-Finance l1 |
| 2 | Rejected-Technical | - | - | Rejected-Technical L3 |
| 3 | Rejected-Technical | - | - | Rejected-Technical L2 |
| Sl No | Description | Qty | Unit | MYTHREE CONSTRUCTIONS L3 | Noushar pp L2 | ABDURAHIMAN P L1 |
|---|---|---|---|---|---|---|
| 1.00SHEET &GRILL WORK | ||||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 0.36 | cum | 320 ₹115.20 | 320 ₹115.20 | 298.69 ₹107.53 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.36 | cum | 9,000 ₹3,240 | 9,000 ₹3,240 | 3,149 ₹1,133.64 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 344.68 | kg | 190 ₹65,489.20 | 175 ₹60,319 | 161.31 ₹55,600.33 |
| 1.00 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 91.8 | kilogram | 175 ₹16,065 | 175 ₹16,065 | 96.89 ₹8,894.50 |
| 1.00 | OD438661/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total
coatedthickness
with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7
microns epoxy
primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should
have
protective guard film of 25 microns minimum to avoid scratchesduring transportation
and
should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge.
The sheet
shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM
seal,
complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of
purlins,
rafters and trusses and including cutting tosize and shape wherever required | 29.92 | sqm | 630 ₹18,849.60 | 600 ₹17,952 | 424.75 ₹12,708.52 |
| 1.01 | OD438677/2025-2026:Providing and fixing 125mm PVC eve gutter fixing in MS flat fabricated in semi
circular
<br>shape and screwed to fix including all cost,conveyance
and labour charges
etc.complete | 17.4 | metre | 350 ₹6,090 | 350 ₹6,090 | 205.21 ₹3,570.65 |
| 1.01 | 50.18.9.17.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall | 25 | metre | 300 ₹7,500 | 300 ₹7,500 | 213.34 ₹5,333.50 |
| 1.01 | 9.48.2:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc | 643.5 | kg | 190 ₹1.2 L | 180 ₹1.2 L | 205.21 ₹1.3 L |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 61.09 | sqm | 160 ₹9,774.72 | 160 ₹9,774.72 | 136.5 ₹8,339.06 |
Tender Value
₹2.5 L
EMD Value
₹6,355
Closing Date
24 Feb 2026, 6:00 pmClosed
Assistant Engineer
O/O AE, LSGD, KODUVALLY MUNCIPALITY
Please refer Tender documents.
2026_LSGD_836384_1
KDLYMCP/LSGD/AE/ET11(05)/25-26
Open Tender
Civil Works - Buildings
180 days
KODUVALLY
Please refer Tender documents.
10 documents required · 10 mandatory
₹565
Yes
₹6,355
Yes
4 Apr 2026
17 Feb 2026
26 Feb 2026
17 Feb 2026
24 Feb 2026
17 Feb 2026
SHEET &GRILL WORK
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
OD438661/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required
OD438677/2025-2026:Providing and fixing 125mm PVC eve gutter fixing in MS flat fabricated in semi circular <br>shape and screwed to fix including all cost,conveyance and labour charges etc.complete
50.18.9.17.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall
9.48.2:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_1409270.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
viewsbd.pdf
Tender Documents • 1.64 MB
BOQ_1409270.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid