CONSTRUCTION OF COMMUNITY HEALTH CENTER BUILDING AT F.P. NO :- 37, T.P.NO :- 14(SHAHIBAUG) IN SHAHIBAUG WARD, CENTRAL ZONE, AHMEDABAD

Name of Work:- CONSTRUCTION OF COMMUNITY HEALTH CENTER BUILDING AT F.P.NO :- 37 , T.P.NO

:- 14(SHAHIBAUG) IN SHAHIBAUG WARD, CENTRAL ZONE, AHMEDABAD

Bill of Quantities

I. No. Qty Items Unit Rate Per Amount

Civil Work Estimate

1 Demolition & Dismantling work

Demolition of RCC work using Hydra

Breacker including stacking of servicable

materials and disposal of unservicable

materials with all lead and lift.Removal Of

Existing Building Foundation and Super

Structure If Any.

Demolition of Brick work and stone

masonry including stacking of serviceable

materials and disposal of unserviceable

materials with all lead and lift.(ii) In Cement

Mortar.Removal Of Existing Building

Foundation and Super Structure If Any.

Dismentaling of sheet roofing including

ridges, Hips, Valleys, Gutters etc. stacking

c of serviceable materials and disposal of

unserviceable materials with all lead and

i 10 (i) G.I.sheet roofing. 47.25 Sq.mt

ii 5 (ii) A.C. sheet roofing. 53.55 sq.mt

Dismentling steel work including

d 2000 distempering and stacking the materials 3.63 Kg.

with all lead and lift.

Dismentling doors, windows, ventilators

etc. (wood or steel) shutters including

chowkhats architraves, hold fasts and other

e 2 185.85 Each

attachment etc. complete and stacking

them with in all lead and lift.

(i)Notexceeding 3 Sq.M. in area.

Removing & Scrapping of Old deteriorated

Plaster of any thickness from Masonary /

R.C.C. member including stacking of

serviceable material & disposal of un

serviceable from site of work with all lead &

Dismentaling any type tiled of stone floors

laid in mortar including stacking of

g 50 serviceable materilas and disposal of 47.25 Sq.M.

unserviceable materials with all lead and

Excavation for foundation including sorting

out stacking of useful material & disposing

2 of excavated stuff upto 50 mt. lead. Loose

& Soft soil.Excexuted With Mechanical

a 2125 up to 1.5 mt. depth 115.92 Cu.M.

b 1822 1.5 to 3.0 mt. depth. 128.52 Cu.M.

c 1714 3.0 to 5.0 mt. depth 141.11 Cu.M.

Add extra for Disposing off the excavated

d 100 stuff of above items for lead of (A) 50 m to 17.28 Cu.M.

Add extra for Disposing off the excavated

e 100 stuff of above items for lead of (B) 100 m to 34.56 Cu.M.

Providing and installing cast in situ single

under reamed piles of specified diameter

and length below pile cap, excluding the

cost of Concrete, steel reinforcement but

f including the cost of boring with bentonite

solution and the length of the pile to be

embedded in pile cap etc. all complete.

(Length of pile for payment shall be

measured upto to the bottom of pile cap) :

i 20 400 mm dia. Piles 638.83 Rmt.

ii 20 450 mm dia. Piles 705.03 Rmt.

Extra over single under ream for providing

additional bulbs in under reamed piles,

g under specified diameter excluding the cost

of Concrete, steel reinforcement (only the

nos. of extra bulbs are to be paid).

t 2 400 mm dia. Piles 813.05 Each

ii 2 450 mm dia. Piles 1103.43 Each

Provdg. & laying cement concrete 1:5:10 (1

cement : 5 course sand : 10 hand broken

3a 1 aggregates 40 mm nominal size) and 2492.52 Cu.M.

curing complete, excluding cost of form

work in foundation & Plinth.

Provdg. & laying cement concrete 1:3:6 (1

cement : 3 coarse sand : 6 hand broken

3b stone aggregates 40 mm nominal size) and

curing complete excluding cost of form

554 (A) Foundation and plinth 2976.00 Cu.M.

Supplying of graded hand brocken stone

3c 201 size of 90 mm to 127 mm at site (Rubble or 609.82 Cu.M.

Labour charges for spreading the spouls

mm to 127 mm thick layer good earth filling

in voids correcting the grade & camber

comp. with rolling, watering, incl. preparing

thesurface by brushing for removing all

loose or dirts ect.comp.

Provdg. & laying cement concrete 1:4:8 (1

cement : 4 coarse sand : 8 hand broken

4 5 stone aggregates 40 mm nominal size) and 2653.67 Cu.M.

curing complete excluding cost of form

work in foundation& plinth.

Filling available excavated earth (excluding

rock) in trenches, plinth, sides of

5 4750 foundations etc. in layers not exceeding 20 129.10 Cu.M.

cm. in depth consolidation each deposited

layer by ramming and watering.

Conveyance charges of earth lime,

murrum, building rubbish, manure,

garbage, sludge, excavated rock, fly ash,

aggregate of any kind etc. comp.

a 100 Conveyance charges 0 km to 1 km 46.63 Cmt

b 100 Conveyance charges 0 km to 2 km 60.69 Cmt

c 8000 Conveyance charges 0 km to 5 km 100.44 Cmt

d 8000 Extra For Lead on Above Item Above 5 km 9.26 Cmt

e 8000 Extra For Lead on Above Item Above 6 km 9.26 Cmt

f 8000 Extra For Lead on Above Item Above 7 km 9.26 Cmt

g 8000 Extra For Lead on Above Item Above 8 km 9.26 Cmt

h 8000 Extra For Lead on Above Item Above 9 km 9.26 Cmt

Filling in plinth with sand under floors

7a 15 including watering, ramming, consolidating, 455.63 Cu.M.

compacting and dressing etc. completed.

Filling in foundation and plinth with murrum

7b 225 or selected soil in layers of 20 cm. 286.20 Cmt

thickness including watering, ramming and

consolidating etc. Complete.

Brick work using common burnt clay

building bricks having crushing strength

8 not less than 35 kg/Sq. cm. in cement

mortar 1:6 (1 cement : 6 fine sand)

conventional brick

a 85 (a) in foundation & Plinth 3981.21 Cu.M.

b 526 Super structure Upto Floor Two Level 4253.46 Cu.M.

c 455 Super structure Above Floor Two Level 4293.55 Cu.M.

I.Half brick masonry in common burnt clay

building bricks having crushing strength

note less than 35 Kg/Sq. Cm. in cement

mortar 1:4 (1 cement : 4 coarse sand)

using conventional brick in Super structure

upto floor Four level

a 515 All Floor Level 646.70 Sq.M.

Providing and laying controlled cement

concrete of M-25 Grade and curing

complete, Excluding the cost of form work,

Scaffolding, cost of reinforcement for

reinforced concrete work For any Height up

to any FloorLevel.

a 48 Foundations,Raft,Footings,Mass concrete 4238.04 Cu.M.

b1 2 RCC Retaining wall at All Floor 4519.88 Cu.M.

Tie-Beam, Lintel , Beam- Bracket, Stair

Case & Landing, Coping ,Slab, balcony,

weather shed, loft , any cantilever etc All

Columns,Pillars, posts and struts at All

Providing and laying controlled cement

concrete of M-20 Grade and curing

complete, Excluding the cost of form work,

Scaffolding, cost of reinforcement for

reinforced concrete work For any Height up

to Floor Four Level.

a 10 Foundations,Raft,Footings,Mass concrete 3977.88 Cu.M.

Tie Beam , Lintel , Beam- Bracket , Coping

b1 153 ,landing, Slab, balcony, weather shed, loft , 4460.36 Cu.M.

any cantilever etc at All Floor

c1 3 Column at All Floor 4558.20 Cu.M.

d1 1 Stair Case All Floor 5418.91 Cu.M.

Providing and laying in position Ready

Mixed M250 grade concrete for reinforced

cement conctere work , using cement

content as per approved Design Mix

manufactured in fully automatic batching

plant and transported to site of work in

transit mixer for all lead having continuous

agitated mixer, manufactured as per mix

design of specified grade for reinforced

cement concrete work including pumping of

R.M.C. from transit mixer to site of laying

with all lead and lift, excluding the cost of

centering shuttering finishing and

reinforcement including cost of admixtures

in recommended proportions as per IS:

9103 to accelerate/ retard setting of

concrete, improve workability without

impairing strength and durability as per

direction of the Engineer - in charge.

Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained) (Cement

Providing and laying in position Ready

Mixed M200 grade concrete for reinforced

cement conctere work , using cement

content as per approved Design Mix

manufactured in fully automatic batching

plant and transported to site of work in

transit mixer for all lead having continuous

agitated mixer, manufactured as per mix

design of specified grade for reinforced

cement concrete work including pumping of

R.M.C. from transit mixer to site of laying

with all lead and lift, excluding the cost of

centering shuttering finishing and

reinforcement including cost of admixtures

in recommended proportions as per IS:

9103 to accelerate/ retard setting of

concrete, improve workability without

impairing strength and durability as per

direction of the Engineer - in charge.

Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained) (Cement

Drilling suitable holes in reinforced or plain

cement concrete with power driven drill

machine to a minimum depth of 80mm upto

250mm in RCC beams, lintels, columns

and slabs to introduce steel bars for

sunshades/balconies including fixing the

steel bars in position using Hilti Chemical

HY200-R but excluding the cost of

reinforcement, all complete as per direction

of Engineer-In-Charge.

8 mm Dia in 80 mm Deep & 12 mm Dia

10 mm Dia in 100 mm Deep & 14 mm Dia

12 mm Dia in 120 mm Deep & 16 mm Dia

16 mm Dia in 160 mm Deep & 20 mm Dia

d 90 608.63 Each

20 mm Dia in 200 mm Deep & 25 mm Dia

25 mm Dia in 250 mm Deep & 32 mm Dia

Providing and laying controlled cement

concrete 1:2:4( 1cement : 2 coarse sand :

Graded stone aggregate 20 mm nominal

size ) and curing complete, Excluding the

cost of form work and reinforcement for

reinforced concrete work in:

a 4 Foundations, footings, base of 3923.53 Cu.M.

columns,grade slab and mass concrete.

slab, landing shelves, Balconies, lintels,

b 1 beams, girders, and cantilever, up to aany 4012.47 Cu.M.

P/A Trimix with dewatering machine and

floater machine on constructed R.C.C. work

c 1635 54.00 Sqmtr

incl. cost of machine and labour etc. comp.

Making 15 mm Groove in R.C.C work on

road and filling it with poly sulfied selant

and finished it good incl. all labour charges

etc. comp. as directed

Providing and laying and fixing 25 mm thick

expansion joint by hydrocell semi rigid UV

e 14 resistance with high performance laminated 738.13 Sqmt

closed cell polythene foam joint filler in

sheet foam as directed, etc. complete.

Providing form work in ordinary timber

planking so as to give a rough finish

including centering, shuttering, strutting and

propping etc. height of propping and

centering below supporting floor to celling

not exceeding 4 M & removal of the same

for in situ reinforced or plain concrete work

a 891 (A) Foundation, footings, bases of columns 171.68 Smt

etc. and mass concrete.

b 3119 (B) Flat surface such as soffits of slabs, 252.00 Smt

landing and the like

c 1443 (C) Vertical surfaces such as walls (any 229.95 Smt

thickness) partitions.

(D) Columns, pillars, posts & struts.

d 2228 (1) Square, rectangular, polygonal in plan 297.68 Smt

e 20 (2) Circular or curved in plan. 422.10 Smt

(H) (1) Sides and soffits of beam,

haunchings cantilevers, girders,

bressumers, Coping and lintels not

exceeding 1 M in depth.

(2) Sides and soffits of beam, haunchings

g 10 cantilevers, girders, bressumers and lintels 259.88 Smt

exceeding 1 M in depth.

h 130 (L) chullah hoops, weather sheds, chhajas, 155.78 Smt

carbels etc including edges.

(M) Staircase with-sloping or stepped

i 400 soffits incl. risers & strings excluding 242.55 Smt

Extra for additional height of propping and

centering where the height of propping and

centering exceeds 4 .O M between

j 100 supporting floor to ceiling including 386.48 Smt

temporary brick or stone pillars for

supporting as required. (i)Height more than

4.0 M.and upto 5.0 M.

Providing T.M.T Fe 500D bar reinforcement

for R.C.C. work including bending, binding

and placing in position complete up to any

a 262735 All Floor Level 75.46 Kg.

Providing and laying polished Kota stone

slab (Polished / River Finish, Green colour )

flooring over 20 mm. (average) thick base

14 60 of cement mortar 1:6 (1 cement : 6 coarse 982.83 Sq.M.

sand) or lime mortar 1:1.5 laid over and

joined with grey cement slurry including

rubbing and polishing complete.25 mm th.

Providing and laying polished Kota stone

slab 25 mm. thick in Platform ,Riser of Stair

, Skirting, Tread , dado and pillars laid on

10 mm. thick cement mortar 1:3 (1 cement :

3 coarse sand) jointed with grey cement

slurry including rubbing and polishing and

MAking groove where it is Required etc.

Providing and laying white/Colur glazed

tiles 6 mm thick in flooring treads of steps

and landing laid on a bed of 12 mm thick

cement mortar 1:3 (1 cement : 3 coarse

sand) finished with flush pointing in white

Providing and layingWhite / Colour glazed

tiles of size 600 mmx300mm x 8 mm /

mmx 450mm x 8 mm in skirting, risers of

steps, Floor and dedo on 10 mm. thick

cement plaster 1:3 (1 cement : 3 coarse

sand) and jointed with white cement slurry.

Providing and laying marble stone slab

flooring over 20 mm. (Average) base of

cement mortar 1:6 (1 cement: 6 coarse

18 2 sand) or L.M. 1:1.5 laid and jointed with 2194.63 Sq. M.

grey cement slurry including rubbing and

polishing complete: (A) Marble slab 25 mm.

Providing and laying Vitrified tiles 8 to

mm thick , 24'' x 24'' in flooring treads of

steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1-cement : 3-

coarse sand) finishing with flush pointing in

Providing and laying Vitrified tiles 8 to

mm thick , 24'' x 24'' in skrting risers of

19b 4100 steps and dedo on 10mm thick cement 1130.15 Sq. M.

plaster 1:3 (1cement : 3-coarse sand) and

jointed with white cement slurry

P & L 24" x 24" vitrified 8 mm thick tile

20 mm (average) base of cement mortar

1:6 ( 1cement: 6 coarse sand) on new

surface or fixing on existing flooring by

adhesive material including dismentaling of

existing flooring and jointed with color

cement slurry including finised with flush

pointing & cleaning the surface etc.

complete for Antiskid

Providing and Fixing 18 mm thick concrete

base exposed brick cladding including

19d 68 surface waterproffing, polymer modified tile 3574.35 Sq.M.

adhesive and polymer modifies tile grout (

grey / white) with neccesary scafolding etc

compl. As per direction of engg. Incharge.

Providing and Laying Tactile Tile (For

Vision Impaired Persons as per

Strandards) of Size 300x300x9.8 mm

Having with Water Absorption less than

0.5% and Confirming to is:15622 of

Approved Make in all Colours and Shades

in for Outdoor floors such as footpath,

Courtyard, Multi models Location etc., laid

in 20 mm Thick Base of Cement Mortar 1:4

( 1 Cement : 4 Course Sand) in all Shapes

& pattern including Grouting the Joints with

White Cement mixed with Matching

pigment etc. Complete as per Direction of

Engineer-in-charge.

Providing and laying Ceramics tiles 6 to

mm thick in flooring, treads of steps,

20 10 landing and dedo on 12 mm. thick cement 960.47 Sq. M.

plaster 1:3 (1 cement : 3 coarse sand) and

jointed with white cement slurry.

Providing & Laying 18 mm thick Mirror

polish granite For flooring , counter , stair -

riser , tread , skirting , dedo , Jambs etc.

machine cut or chiselled on bed of cement

mortar 1:1 pointing with neat cement slurry

incl. moulding, Making grooves where it is

required etc. comp. as per instruction of

engineer in charge.

Provdg. 20 mm. thick Finish / Mala cement

plaster in single coat on fair side of brick /

22a concrete walls for interior plastering upto

any Floor level and finished even and

smooth in C.M.1:4.

i 3835 All Floor Level 190.58 Sq.M.

Provdg. 20 mm. thick Finish / Mala cement

plaster in single coat plastering on ceilings,

b Beam side and sofits of stairs upto any

Floor level and finished even and smooth in

i 3699 All Floor Level 215.15 Sq.M.

Providing & fixing 23 cm wide chicken

c 1288 mesh jali with nails & then application of 15 292.59 Sq.mt

mm plaster on R.C.C. & masonary joints as

per dir. of engg. In charge.

Providing and mixing water proofing

materials in cement mortar in proportion

d 250 recommended by the manufacturer. etc. 48.77

comp. as per instruction of engineer in

Providing 20 mm th. Double coat Sand face

/ Mala Cement Plaster on Walls upto any

Height Above Ground level consisting of

23a 2902 mm th. Backing coat of C.M. 1:3 ( 1 cement 297.68 Sq.M.

: 3 Ssand ) & 8 mm th. Finishing coat of

C.M. 1:1 ( 1 cement : 1 sand ) ets.

White / Color washing with lime on

undecorated wall surfaces (two coats) to

24a 100 give an even shade including thoroughly 12.29 Sq.M.

brooming the surface to remove all dirt,

dust mortar drops and other foreign matter.

Providing & Applying 3 mm thick External

Wall Rustic Type Texture as per Design &

Make as Approved by Consultants /

Engineer in Charge. Work Includes All

Necessary Scaffolding Work upto Any

Finishing walls with Acrylic Smooth exterior

paint of required shade :New work (Two or

24 c 2850 more coat applied @ 1.67 ltr/10 sqm over 174.97 Sq.M.

and including priming coat of exterior

primer applied @ 2.20 kg/10 sqm)

P./L. METALIC HERITAGE SURFACE

Providing and fixing of HERITAGE textured

homogeneous wall finishing system from

BAKELITE HYLAM LTD or equivalent

make consisting of a two component

system of (25 kgs per Pack) made of 92%

silica particles coated with fade resistant

pigments, 100% acrylic polymer bonding

agent (5kgs per pack) with the applied

thickness of the coating being between

0.8mm-1.2mm to be applied on acured,

smooth level plaster without keying, as per

the shades/combinations approved, as per

the manufacturer directions, for usages,

tobe applied by an approved applicator of

the manufacturer, as per the directions /

supervision of the engineers in charge, all

complete. Includes All Necessary

Scaffolding Work upto Any Height.

Wall Painting (two coats) with plastic

emulsion / Oil paint of approved brand and

manufacture and of shade required on

undecorated wall surfaces to give an even

shade, over and including a priming coat

25a 5800 with alkali resistance primer of approved 78.44 Sq.M.

brand and manufacture after thoroughly

brushing the surface free from mortar

droppings, and other foreign matter and

also including preparing the surface even

and sand -papered smooth

Extra over above item for every subsequent

b 5800 coat of of wall painting with plastic emulsion 33.39 Sq.mt.

/ Oil paint of approved brand.

Applying two coats of Birla (white cement

based) or Asian (acrylic lapy-putty) or

equivalent & two coats of primer of

approved brand and manufacture on new

wall surface to give an even shade

including thoroughly brushing the surface

free from mortar dropping and other foreign

matter and sand papered smooth.

Providing & Laying & Jointing glazed

stoneware pipes incl. excavation up to

mt.,refilling, trasporting the pipe to work

site, unloading, lowering in trenches, laying

and jointing the pipes in c.m. 1:1 incl. all

26 jointing materials such as cement, sand,

hemp, bitumen as dire. testing the pipe line

to a head of 1.5 mt. and hydraulic test as

dire incl. watering trenches, spreading , and

carting away of surplus earth within

mt.lead as dire. etc. comp.

a 150 23 cm dia. 344.64 Rmt

Providing & Laying & Jointing glazed

stoneware pipes incl. excavation up to

mt.,refilling, trasporting the pipe to work

site, unloading, lowering in trenches, laying

and jointing the pipes in c.m. 1:1 incl. all

jointing materials such as cement, sand,

hemp, bitumen as dire. testing the pipe line

to a head of 1.5 mt. and hydraulic test as

dire incl. watering trenches, spreading , and

carting away of surplus earth within

mt.lead as dire. etc. comp.

b 25 15 cm dia 211.05 Rmt

c 15 10 cm dia. 288.23 Rmt

Constructing brick masonry chamber for

under ground C.I. Inspection chamber and

bends with bricks having croshing strength

not less than 35 Kg. Cm2 in C.M. 1:5 C.I.

cover with frame (Lightduty) 455mm x

mm intenal dimensions total weight of

cover with frame to be not less than 38 Kg.

(Wt. of cover 23Kg.) and Wt. of frame

27 18 15Kg.) (R.C.C.top slab with 1:2:4 mix (1- 3863.85 No.

cement:2-coarse sand:4-graded stone

aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15 mm thick with

cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside

dimensions 455 mm x 610 mm and up to

Constructing Manhole with R.C.C. top slab

in 1:2:4mix (1-cement: 2-coarse sand:4-

graded stone aggregate 20 mm nominal

size) foundation concrete 1:3:6 mix (1-

cement:3-coarse sand:6-Brick bats

40+50mm size) inside plastering 15mm

thick with Cement Mortar 1:5 (1-Cement:5-

coarse sand) finished with a floating coat of

neat cement and making channels in

cement concrete 1:2:4 mix (1-Cement:2 -

Coarse sand:4-stone aggregate 20 mm

28 a 4 nominal size) finished smooth complete 19139.07 No.

including curing and festing (i) Inside size

900mm x 1200mm and up to 1.5M. deep

including C.I. cover with frame size 560 mm

diameter total weight of cover and frame to

be not less than 128kgs. (Wt. of cover

64Kg. and Wt. of frame 64Kg.) (A) With

mm thick walls of brick masonry using brick

having crushing strength not less than

35Kg./Sq.cm. in Cement Mortar 1:5 (1-

Cement: 5-Coarse sand) (2)B type depth

up to 1.50 Metre

Providing and fixing white vitreous china

flat back or wall corner type lipped front

urinal basin of 340x280x470 mm sizes

respectively with standard flush pipe,

Waster Pipe, Waste Coupling, PVc

Connection and G.I clamps complete,

including painting of fittings and brackets,

cutting and making good the walls and

floors wherever required : Cera Model No.

S4020103 or Equivalent

Providing and Fixing of C.P. Brass BIB

Cock of 15 mm Dia of Jaquar make

b 60 florentine series model no. 5047n or 1564.17 No.

equivalent make with all necessary fittings.

as approved by Engineer - in - charge.,

Providing and fixing brass screw down

Angle stop tap.(A) 15mm dia. Of Jaquar

c 60 make florentine series modelno. 5053n or 1160.57 No.

equivalent make with all necessary fittings.

as approved by Engineer - in - charge.,

Providing and fixing C.P. brass shower

d 10 rose with 15mm or 20mm inlet Shower 279.37 No.

Arm.(A) 100mm dia. Each

Provding and Fixing of autoclosing

pressmatic pillar cock / bib cock with all

necessary fittings of Polished Bright

e 10 Chrome Finish of Jaquar make model no. 3280.52 No.

031L65 or equivalent make as approved by

Engineer in Charge. Rate including of cost

of labour, material etc. in complete manner.

Providing and Fixing of C.P. Brass Two

Way Bib Cock of 15 mm Dia of Jaquar

f 32 make model no. 041kn or equivalent make 1411.58 No.

approved make with all necessary fittings.

as approved by Engineer - in - charge.,

Providing and Fixing of C.P. Brass urinal

Valve Auto Closing System With Full Built

in Control Cock & Wall Flange of 15 mm

g 20 Dia of Jaquar make model no. 077 or 2568.08 No.

equivalent make approved make with all

necessary fittings. as approved by

Engineer - in - charge.,

Providing and Fixing of C.P. Brass Pillar

Cock Auto Closing System with Elbow

Operated Extended Lever of 15 mm Dia of

h 30 Jaquar Make Model No,031 MED or 3723.48 No.

Equvalent Approved Make & Model with all

necessary fittings. as approved by

Engineer - in - charge.,

Provdg. & laying S.W. Gully trap with C.I.

garting brick masonry chamber & water

30 15 tight C.I. cover with frame of 300 mm x 300 1234.57 No.

mm size ( inside) with standard weight.

sqare mouth trap size 150 x100 mm P trap

Providing erecting and fixing double coated

31 2000 ISI water tank of required capacity each 3.91 Litre

with all necessary fittings and connection

etc. complete on terrace

Extra rate over item of excavation of earth

for excavation of asphalt pavement/RCC of

thickness up to 0.20 meter including

32 20 demolishing the asphalt carpet, metal, 71.43 Sq.M.

soiling / cutting Reinforcement etc.comp.

with stacking the material as directed.-up to

0.20 meter thickness

Providing and fixing PVC SWR Nahni trap

IS 14735 for drain - 100 mm diameter with

33 55 following nominal diameter of self cleansing 565.43 No.

design with C.I scread down or hinged

grating including the cost of cutting and

making good the walls.

Provdg. And fixing Concealed / Open to

wall, ceiling & floor in true line and level

UPVC pipe Schedule- 40 of make as

approved by engg. incharge. pipe shall be

fix on wall with the help of clamp at every

34a twi meter center to center of shall be

concealed as directed in cluding

neccesarry fitting etc. in cluding testing of

pipe and jointd and fixing the same with

adhesive solvent , including cost of all

materials of following nominal bore

ii 650 25 mm 90.93 Rmt

iii 15 32 mm 117.97 Rmt

iv 240 40 mm 146.65 Rmt

Providing and fixing concealed center point

to wall ceiling & floor CPVC (SDR 13.5)

PIPE having National Sanitation

34b Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and

clamps including making good the wall,

ceiling and floor etc. complete

i 5 15 mm 165.21 Rmt

ii 5 20 mm 202.97 Rmt

iii 5 25 mm 247.25 Rmt

iv 5 32 mm 330.36 Rmt

v 5 40 mm 437.66 Rmt

vi 5 50 mm 647.30 Rmt

Provdg. And fixing to wall ,ceiling and floor

10.00 kg. F/Sq.Cm2 working pressure

polythelene pipes of the following outside

35 diameter, low, density, complete with

special flange compression type fittings,

wall clips etc. making good wall ceiling and

b 130 (A) 75mm dia 274.68 Rmt

c 400 © 110 mm dia 332.91 Rmt

Providing and fixing water closet squatting

36 8 Pan ( Indian type W.C. Pan) size 580mm 1351.15 No.

(A)VitreousChina. (I)Long pattern = White

colour with Trap and Pair of Foot Rest

Providing and fixing white vitreous china

extended wall mounting water closet of

Cera Make S1043101 Carat Model Or

Equivalent Model With EWC Soft Close

Seat Cover, Chair Bracket, nuts, bolts and

gasket etc complete.

Providing and fixing chromium plated brass

b half trun flush cock of approved quality

including fixing in pipe line etc. complete.

Providing and fixing Health Faucet of

Jaquar make model no. 573 oe equivalent

c 30 make as approved by engg. In charge with 1543.36 No.

flexible tube upto 1 metre long etc.

Providing and fixing 24"x18"x8" Carysil

Elegance or Equivalent Make of Single

38a 2 Bowl Sink S.S. Matt Finish With Waste 7960.60 No.

Coupling, Waste Pipe,etc. cutting and

making good the walls wherever required.

Providing and fixing Under counter Wash

basine including 15 mm C.P. Brass Pillar

tap, 32 mm C.P. Brass Waste of Standard

make, Include All Accessaries, Cutting &

Making good the wall / granite Wherever

Required in White Color : Model S2030101

of Cera Clair Series or Equivalent make

Waash basine of size : 520x450 mm

Providing and fixing Wall Hung wash basin

Including 32 mm C.P. brass waste of

standard pattern, Include All Accessaries,

c 15 cutting and making good the walls / granite 3825.20 No.

wherever require:In White Color : Cera

Cadal Or Equivalent Make Wash basin of

size 515 x 410 mm

Providing and Fixing White Vitreous China

Laboratory Sink with C.I. Brackets, C.P.

Brass Chain with Rubber Plug, 40 mm C.P.

Brass Waste and 40 mm C.P. Brass Trap

d 4 with Necessary C.P. Brass Unions 5581.19 No.

Complete, Including Painting of Fittings and

Brackets, Cutting and Making Good to Wall

/ Granite Wherever Required: Size 600 x

Provdg. & fixing 600mm x 450 mm

Bevelled edge mirror of superior glass

39a 35 mounted of .6 mm th. A.C. sheet or 825.48 No.

plywood sheet and fixed to wooden pluge

with C.P. brass screws and washers.

Provdg. & fixing C.P..Brass towal rail

complete with C.P. brass brackets fixed to

wooden plugs with C.P. Brass screws.(600

mmx 20 mm size)

Providing and fixing ball valve (brass) of

41 approved quality, High or low pressure,

with plastic floats complete :

i 14 15 mm dia 886.22 No.

ii 1 20 mm dia 1099.94 No.

iii 40 25 mm dia 1552.93 No.

iv 20 40 mm dia 3312.60 No.

v 5 50 mm dia 4613.48 No.

42a Providing and fixing Full Way valve (HEX)

with wheel of approved quality :

i 6 15 mm Full Way valve (HEX) 1461.17 No.

ii 1 20 mm Full Way valve (HEX) 1924.61 No.

iii 12 25 mm Full Way valve (HEX) 2535.55 No.

iv 1 32 mm Full Way valve (HEX) 3377.64 No.

v 10 40 mm Full Way valve (HEX) 4661.10 No.

vi 5 50 mm Full Way valve (HEX) 6675.14 No.

Providing and Fixing of C.P.Brass Pillar

Cock of 15 mm Dia of approved make with

all necessary fittings. as approved by

Engineer - in - charge.,

b 10 Providing fixing of SS grab bar with all 1937.24 No.

hardwares for Physically Handicap toilet.

Providing and laying integral cement based

water proofing treatment including

44a 800 preparation of surface as required for 1150.48 Sq.M.

treatment of roofs, balconies, terraces etc

consisting of following operations:

(a) Applying a slurry coat of neat cement

using 2.75 kg/sqm of cement admixed with

water proofing compound conforming to IS.

2645 and approved by Engineer-in-charge

over the RCC slab including adjoining walls

upto 300 mm height including cleaning the

surface before treatment.

(b) Laying brick bats with mortar using

broken bricks/brick bats 25 mm to 115 mm

size with 50% of cement mortar 1:5 (1

cement : 5 coarse sand) admixed with

water proofing compound conforming to IS

: 2645 and approved by Engineer-in-charge

over 20 mm thick layer of cement mortar of

mix 1:5 (1 cement :5 coarse sand )

admixed with water proofing compound

conforming to IS : 2645 and approved by

Engineer-in-charge to required slope and

treating similarly the adjoining walls upto

300 mm height including rounding of

junctions of walls and slabs.

(c) After two days of proper curing applying

a second coat of cement slurry using

kg/ sqm of cement admixed with water

proofing compound conforming to IS :

and approved by Engineerin- charge.

(d) Finishing the surface with 20 mm thick

jointless cement mortar of mix 1:4 (1

cement :4 coarse sand) admixed with water

proofing compound conforming to IS :

and approved by Engineerin- charge

(e) The whole terrace so finished shall be

flooded with water for a minimum period of

two weeks for curing and for final test.“All

above operations to be done in order and

as directed and specified by the Engineer-

in-Charge :and shall be guaranteed for

minimum period of 10 years after handing

over the completed building by the main

contractor to be finished as directed.

Stamp paper guarantee 10 years to be

furnished before receiving any payment

from the client.

With average thickness of 120 mm and

minimum thickness at khurra as 65 mm.

Providing and laying broken chine mosaic

flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to

b 800 be tempered to bring mortar creme out upto 739.89 Sq. M.

surface using white cement including

rounding off junctions and extending them

upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed.

Providing and applying fibre reinforced

elastomeric liquid water proofing

membrane with resilient acrylic polymers

having Sun Reflectivity Index (SRI) of

on top of concrete roof in three coats

@10.76 litre/ 10 sqm. One coat of self-

priming of elastomeric waterproofing liquid

(dilution with water in the ratio of 3:1) and

c 490 two coats of undiluted elastomeric 562.40 Sq. M.

waterproofing liquid (dry film thickness of

complete application/system not less than

500 microns). The operation shall be

carried out after scrapping and properly

cleaning the surface to remove loose

particles with wire brushes, complete in all

respect as per the direction of Engineer-in-

Filling in Sunken Portion with good Quality

Aerated light weight concrete block having

crushing strength not less than 35 kg/sqcm

and where directed by the Architect /

Engineer-in-charge, in sunk in layer.

including watering, ramming where it is

required etc. complete, as directed by the

Architect / Engineer-in-charge .

Providing and laying cement concrete

flooring ( I.P.S.) 1:2:4 (1-cement : 2-coarse

sand : 4-graded stone aggregate 20mm

nominal size) laid in one layer and finished

with a floating coat of neat cement. (B)

Providing and fixing M.S. grills/ Gate of

required pattern to wooden/ Granite frames

of windows etc. with M.S. flats at required

spacings and frame alround, square or

round bars with round headed bolts and

nuts or by screws all complete as per the

structural designs and directions of

Engineer in charge

Providing & Fixing Structural steel work (

Confirming to IS 4923-1997) riveted, bolted

or welded in builtup for all type sections, in

framed work, including cutting, hoisting,

fixing in position and applying a priming

coat of approved steel primer all complete

as per the structural designs and directions

of Engineer in charge

Applying priming coat over new steel and

other metel surface after and including

preparing the surface by throughly

c 600 cleaning, oil, grease, dirt and other foreign 34.34 Sqmt

matter and scoured with brushes fine steel

wood, scrapers and sand paper with ready

mixed priming paint brushing red lead.

Painting two coats (excluding priming coat)

on new steel and other metal surface with

enamel paint, brushing, interior to give an

d 600 even shade including cleaning the surface 86.94 Sqmt

an even shade including cleaning the

surface of all dirt, dust and other foreign

Providing & Fixing 1.2 mm Thick S.S.-304

Grade 900 mm to 1150 mm High S.S.

Railing having Hand Rail Member of 50 mm

Dia., 4 No. of Horizontal Pipe of 16 mm

e 120 Dia. & Baluster Suppprt of 40 mm Dia. At 2270.21 R.Mtr.

Every Third Step as per Detail Given. Rate

Includes All Work Complete as per

Description & as per Direction of Engg. in

Providing and fixing in position collapsible

steel shutters with vertical channels

20x10x2 mm braced with flat iron diagonals

20x5 mm size with top & bottom rails of T-

iron 40x40x6 mm with 38 mm dia. Steel

pulleys complete with bolts , nuts , locking

arrangement , stoppers , handles including

applying a priming coat of red lead paint.

Providing corrugated 0.80 mm (22 gauge)

thick G.I. sheets roofing fixed with

galvanized iron ‘J’ or ‘L’ hook bolts, and

b 5 nuts 8 mm. dia with bitumen and G.I. limpet 719.93 Sq.M.

washers filled with white lead complete

excluding the cost of purlines, rafters and

Providing valleys 900 mm. overall in plain

1.6 mm. thick G.I. sheet Class – 3 fixed

c 2 with ‘J’ or ‘L’ hook bolts and nuts 1042.78 Sq.mt.

galvanized from ‘J’ or ‘L’ hook bolts and

bitumen washers complete.

Providing and fixing rolling shutters of

approved make made of 80 mm wide M.S.

laths inter-locked together through their

entire length and jointed together at the

ends by end locks mounted on specially

48a 9 designed pipe shaft with bracket plates, 3468.72 Sq.M.

guide channels and arragements for inside

and outside locking with push-pull

operation including the cost of hood cover

and spring etc. complete.(A) Shutters

having width below 3.5 M.

Providing and fixing rolling shutters of

approved make made of 80 mm wide M.S.

laths inter-locked together through their

entire length and jointed together at the

ends by end locks mounted on specially

b 12 designed pipe shaft with bracket plates, 4450.51 Sq.M.

guide channels and arragements for inside

and outside locking with push-pull

operation including the cost of hood cover

and spring etc. complete. (B) Shutters

having width 3.5 M. and above

Providing and fixing 27mm domal Series -

1.2 mm Th. Alluminium Section Three track

Sliding window With Metalic Powder

49a 194 Coating and 4 MM Clear Glaas(Non Tuffen) 6373.85 Sq. M.

Include All Accessaries and Fixture etc.

complete as per the direction of Engineer-

Providing and fixing 27mm domal Series -

1.2 mm Th. Alluminium Section Two track

Sliding window With Metalic Powder

b 12 Coating and 4 MM Clear Glaas(Non Tuffen) 4999.10 Sq. M.

Include All Accessaries and Fixture etc.

complete as per the direction of Engineer-

ALUMINIUM DOOR WORK

Providing and fixing Aluminium Door work

(Single Shutter OR Double Shutter with or

without fix glass) made from Jindal or

equivalent make Powder Coated (50

micron pure polyester coating ) ,aluminium

section frame built up standard tubular and

other section of approved make confirming

to IS 733 and IS 1285 , member size with

shutters of horizontal member , vertical

member Confirming to IS733 and IS

fixed with rawl plug abd screws or fixing

clips or with expansion hold fasteners

including necessary filling up of gaps at

junctions at top bottom and sides with

required PVC/ Neoprene felt, 8/12 mm

toughened glass of approved make etc.

Aluminum sections shall be smooth, rust

free, straight.mitred and jointed

mechanically wherever required including

Door Hardware such as cleat angles

aluminum snap beading for glazing

/paneling, CP Brass/ Stainless steel

screws, Stoppers, heavy duty floor hing,

S.S. Hinges, aldrop , Locking system,

heavy duty Floor Springs, Pivot and fixtures

and transparent silicon sealant glass fixing

to frame as per details all complete as per

architectural drawings and the direction of

Engineer in Charge. rate incl. all type of

alumnium sections for doors as per the

detail Architectural dwg.

Providing and fixing standared extruded of

alluminium section of size 63 mm x

mm x 1.2mm (Section:2434, @

50 a 20 Wt.0.643Kg/mt ) with colour anodized 1163.92 Sq. M.

alluminium frame for ventilation with 5 mm

thick frosted glass as details etc complete

for Ventilation

Providing and fixing standared extruded of

alluminium section of size 63.50 x 38.10 x

1.95 mm ( Section no: 4605, @Wt

50 b 27 Kg / Rmt with colour anodized alluminium 1509.90 Sq. M.

frame with 5 mm thick transparent bronze

colour tinted float glass as details etc

complete for Fix window.

Providing Fixing 1.2 mm thick Alluminium

Section Partition -Fully Glazed / Partly

Panelled Partly Glazed / Fully Panelled

Having Size of Section of 2.1/2 x 1.1/2 with

4 mm Compact Sheet / 5 mm thick Glass

Fixing with 4 mm thick EPDM Rubber etc.

Complete as per Direction of Consultant /

Providing Fixing 1.2 mm thick Alluminium

Section Partition Door -Fully Glazed / Partly

Panelled Partly Glazed / Fully Panelled

frame Having Size of Section of 2 .1/2 x

.1/2 and Door Section Having Size of Tips

Vertical 1 .3/4 x 1 .3/4, Top Rail 4 x

50d 4 .3/4, Middle Rail 1 .3/4 x 1 .3/4, Bottom 4061.77 Sq.mtr.

rail 4 x 1 .3/4 with 4 mm Compact Sheet /

5 mm thick Glass Fixing with 4 mm thick

EPDM Rubber Including Lock, Handle,

Door Closer, Door Stoper, Stopper etc

Complete as per Direction of Consultant /

Providing and fixing Structural Glazing with

using the 17 Micron anodised of approved

colour alluminium section as transium,

mullium of size 63mm x 38mm x 2 mm with

using 6 mm thick reflective structural glass

of approved make, colour / Tinted,

toughned and shade and fixed with silicone

sealant and spacer tap and at corner

sealed neoprene foam dust and Air sealed

gasket mirred including scaffolding,

cleaning of glass etc.complete at all heights

anf lifts with all necessary fitting and

fixtures, anchore fasteners, necessary M.S.

or Aluminium brackets, suitable design for

openable or sliding window as per

Architectural drawing and as directed by

Engineer-in-charge. Grooves between the

glasses to be filled with sealant of Dow

corning - structural sealant 995, weather

sealant 789. The entire facade should be

water proof. The mullions are to be

connected to bracket by SS-304 nut bolts.

Measurement shall be given as per actual

execution of the work. (Rate are included

providing & fixing of MS structure steel

work wherever Required)

Providing and fixing ISI marked 35 mm

thick flush door shutters conforming to IS :

2202 (Part I) decorative type, core of block

board construction with frame of 1st class

hard wood and well matched teak 3 ply

veneering with vertical grains or cross

bands and face veneers on both faces of

shutters with 1.00 mm thick Decorative

Laminated Sheet on both faces of shutters

including ISI marked Stainless Steel butt

hinges, bright /matt finished 125 mm

Stainless Steel handles of approved quality

& make, ISI marked oxidised M.S. door

latches / Aldrop Conforming to IS:5930 with

necessary screws etc. complete as per

direction of Engg. incharge.

Providing wood work in frames of Doors,

windows cleare story windows and

othersimilar works wrought, framede and Cu.Decim

fixed in position. (A) Indian Teak Wood

Providing & Fixing Fluted Glass Partition

and Door Using 16 x 45 mm Powder

Coated Alluminium Section with 8 mm

Thick Fluted Toughened Glass Including

Lock, Handle, Floor Spring, Connector,

Silicon and All Other Accessaries including

Making Pit etc Complete as per Direction

of Consultant / Engg.incharge.

Providing & Fixing Profile Shutter Using

x 45 mm Powder Coated Alluminium

Section with 5 mm Thick Fluted Toughened

d 220 Glass, Concealed Handle Section and 14838.39 Sq.mt.

Hinges Including All Accessaries etc

Complete as per Direction of Consultant /

Providing and fixing of approved make

Clean room doors. Doors should be

finished in Powder Coating with thickness

of 60 microns approx. in desired Shades.

The manufacturer company must be ISO

9001-2015 certified. The door frame is a

Single rebate profile of minimum size

105mm X 57 mm made out of 1.2 mm

minimum thick galvanized steel sheet. The

frame is finished with Powder Coating in

desired Shade. Frame having provisions

e 75 and necessary Arrangement for receiving 10705.16 Sq.mt.

appropriate hardware like lock and hinges.

The door leaf shall be a minimum 46mm

thick fully flush double skin door with vision

lite of DGU Glass of Size 300 x 300 mm x

mm . The door leaf shall be manufactured

from 1.0 mm thick galvanised steel sheet.

Door Includes SS 304 Hinges, D type Pull

Handle-SS 304, Mortise Deadlock with

cylinder - 70mm both side key , Flush type

tower bolt, Door Seal , Door Closer etc.

Complete as per Standard Requirement.

Providing and fixing of approved make

radiation-proof lead line door with

galvanised steel. Recommended lead door

design should be a sandwich-type panel

with both sides GI Sheet with a minimum

2mm Lead infill. Doors should be finished in

Powder Coating with thickness of

microns approx. in desired Shades. The

manufacturer company must be ISO 9001-

2015 certified. The door frame is a Single

rebate profile of minimum size 105mm X

mm made out of 1.2 mm minimum thick

galvanized steel sheet & with 2mm lead

f 19 infill. The frame is finished with Powder 27488.83 Sq.mt.

Coating in desired Shade. Frame having

provisions and necessary Arrangement for

receiving appropriate hardware like lock

and hinges. The door leaf shall be a

minimum 46mm thick fully flush double skin

door without vision lite. The door leaf shall

be manufactured from 1.0 mm thick

galvanised steel sheet. Door Includes SS

304 Hinges, D type Pull Handle-SS

Mortise Deadlock with cylinder - 70mm

both side key , Flush type tower bolt, Door

Seal , Door Closer etc. Complete as per

Standard Requirement.

Providing and fixing 35 mm th. Shutters

for doors windows & clearstory windows

incl. wood frames as specified 12 cm. x

53 7cm. size incl. anodised alluminium fixtures

and fastenings including primer coat of

approved quality and two coats of oil paint

a 3 Fully glazed 4788.50 Sq. M.

b 3 Fully panelled 5478.89 Sq. M.

c 3 Partly panelled and partly glazed 5133.69 Sq. M.

Providing and Fixing FRP FRAME size

x 65 mm and 35 mm thick FRP shutter with

wood grain raised pannel design finish

shutter having extra reinforcement on sides

and edges and in polish finish The core of

the shutter is to be filled up with injected

fire extingushing grade.polyurethane foam

54 65 done in situ along with embedded wooden 1999.98 Sq.M.

pieces for stiffering and also for tacking

hinges and fixtures. The whole FRP frame

and shutter is to be water proof.weather

proof,tennite proof and resistance to mild

acid/ Alkali, Rates are to be inclusive of

S.S. hinges with necessary screws and

brass fixtures and fasening.

Making connection to the ex.M.H.in running

sewer incl. Dewatering and other required

machinery etc. of following dia pipes at any

convenient time. All damaged work shall be

well repaired as per instructions.

a 1 For Pipe 150 mm to 300 mm diameter 1339.29 No.

b 1 For Pipe 400 mm to 600 mm diameter 2232.14 No.

Making connection of galvanised Mild steel

distribution branch with galvanised mild

56 1 steel main 50mm to 80mm nominal bore by 600.08 No.

providing and fixing tee including cutting

and threading the pipes complete

Providing throating or plaster drip, grooves

57a 2000 and moulding to Wall , R.C.C. chajja and 41.25 Rmt

Providing & Laying cement vatta 10 cm x

10 cm in size quarter round in c.m. 1:1 (

57b 180 cement, 1 coarse sand) laid in one layers 23.45 Rmt

finishing with a floating of neat cement

watering etc complete as dire.

Carring out plinth treat ment to post

construction/ existing structure by spraying

chemical solution for termite control

treatment including labour and material

consist ment withI.S.I specification. Using

Chlordene and Chiorpur files 20EC. As Per

58 800 6131_ paret- II Consentration Weight one 104.09 Sq.mt

percent is recommended i.e one litre 20EC

chemical emulsion with19 liter give1%

concrentration inclusive of one litre

chemical emulsion appication at the rate of

5 Litre chemical/ Sqm of surface is

recommended as per I.S

Carring out timber treatment to all wood

work including drilling holes and spraying

oil based chemical solution on surface of

timber work for termite control including

labour and material etc. complete. Using

Chlordene 20EC. As Per 6113_part III

Consentration Weight 1.00 percent is

recommended one litre chemical emulsion

dillute with 9 liter of kerosene precent

concentration. Total dillute concrentration

will be10litre inclusive of the litre chemical

emulsion application 0.75/Litre chemical

per one Sqmt printed two coat wood

Paver Block Providing and laying shot

blasted Non - interlocking, Paver blocks of

specified thickness, size, grade of concrete

and colour machine made and blasting by

automatic shot blasting machine and high

density of as per approved sample of

approved make for footpath, parking areas,

service lanes,cross over and other areas as

mentioned in the drawing. Including

providing and laying 50 mm thick averave

bedding layer of coarse sand below paver

block as per required grading and

specification. Laid paver block shall be

mechanically compacted. The work of the

paving blocks shall be executed in line and

60 200 level by skilled mason of flooring work only. 758.93 Sq.mt.

Small size of paver block with same

specification shall be used at residue or at

end. It should be laid in such a way that the

no cutting of the paver block to be

necessary. If cutting of paver block shall be

required , than cut by machine only and

laying to be done by skilled flooring mason.

The finished surface of the paver block

shall have coarse sand Texture Finish.

Pave blocks shall be compacted and shall

be re-laid if necessary. Actual laid area

shall be measured and paid without any

wastage. (A) 80 mm thick M-35 grade Grey

Paver block of size 200mm x 200mm. As

per approved rate

SProviding and fixing pre-cast concrete

kerb stone of gray cement based concrete

block 30cm length,30cm height and 15cm

thick of M250 grade concret as per

approved design and including excavation

for fixing in proper line and level,filling the

joint with C:M 1:3 (1cement:3fine sand) etc

Providing and fixing double action hydraulic

floor spring of approved brand and

manufacture conforming to IS :

having brand logo embossed on the body /

plate with double spring mechanism and

door weight upto 125 kg, for doors,

including cost of cutting floors, embedding

62a 36 in floors as required and making good the 4558.89 No.

same matching to the existing floor

finishing and cover plates with brass pivot

and single piece M.S. sheet outer box with

slide plate etc. complete as per the

direction of Engineer-in-charge. With

stainless steel cover plate minimum

Providing and fixing aluminium extruded

section body tubular type universal

hydraulic door closer (having brand logo

with ISi, IS : 3564, embossed on the body,

door weight upto 36 kg to 80 kg and door

width from 701 mm to 1200 mm), with

double speed adjustment with necessary

accessories and screws etc. complete.

Designing, fabricating, testing, installing

and fixing in position Curtain Wall with

Aluminium Composite Panel Cladding, with

open grooves for linear as well as

curvilinear portions of the building , for all

heights and all levels etc. including:

(a) Structural analysis & design and

preparation of shop drawings for pressure

equalisation or rain screen principle as

required, proper drainage of water to make

it watertight including checking of all the

structural and functional design.

(b) Providing, fabricating and supplying and

fixing panels of aluminium composite panel

cladding in pan shape in metalic colour of

approved shades made out of 4mm thick

aluminium composite panel material

consisting of 3mm thick FR grade mineral

core sandwiched between two Aluminium

sheets (each 0.5mm thick). The aluminium

composite panel cladding sheet shall be

coil coated, with Kynar 500 based PVDF /

Lumiflon based fluoropolymer resin coating

of approved colour andshade on face #

and polymer (Service) coating on face #

as specified using stainless steel screws,

nuts, bolts, washers, cleats, weather

silicone sealant, backer rods etc.

(c) The fastening brackets of Aluminium

alloy 6005 T5 / MS with Hot Dip Galvanised

with serrations and serrated washers to

arrest the wind load movement, fasteners,

SS 316 Pins and anchor bolts of approved

make in SS 316, Nylon separators to

prevent bi-metallic contacts all complete

required to perform as per specification and

drawing The item includes cost of all

material & labour component, the cost of all

mock ups at site, cost of all samples of the

individual components for testing in an

approved laboratory, field tests on the

assembled working curtain wall with

aluminium composite panel cladding,

cleaning and protection of the curtain wall

with aluminium composite panel cladding

till the handing over of the building for

occupation. Base frame work cost for ACP

cladding is included in this item rate. The

Contractor shall provide curtain wall with

aluminium composite panel cladding,

having all the performance characteristics

all complete , as per the Architectural

drawings, as per item description, as

specified, as per the approved shop

drawings and as directed by the Engineer-

in-Charge. However, for the purpose of

payment, only the actual area on the

external face of the curtain wall with

Aluminum Composite Panel Cladding

(including width of groove) shall be

measured in sqm. up to two decimal

Providing and Fixing Box type metal letters

forming composite box made from 1mm

thick stainless steel plate of grade

having brush finish of following font size to

64 be fixed at Main Gate in english and or

Gujrati and including fixing charges. etc.

complete as per direction of Engg.

incharge. for Payment Purpose Height of

Letter will be measured.

a 960 Upto 300 mm Height 93.85 R. Inch

Providing and Fixing MURAL made out of

2mm thick s.s. plate grade 304, including

making necessary design as per Architect

dwg. Through laser cutting including

connection to the R.C.C./Masonary with

necessary frame,anchor fastnuts,M.S.Plate

etc. complete as per direction of Engg.

Providing and Fixing Sinage - internal and

external signage boards with Vinyle Text on

65b 20000 ACP sheet / 2 mm th. S.S. Plate etc. 9.38 Sq.Inch

complete as per direction of Engg.

Providing and fixing retro Reflective Hi

Intensity Micro Prismatic Grade Board

using 2mm Aluminum / 4mm ACP, angle

iron 75 x 75 x 6mm. Descaling and

degreasing the board as per requirement

using epoxy reflactive process by screen

painting as directed etc. complete including

transporting and fixing in C.C. 1:2:4 with

65c 5 necessary excavation curing etc. complete 7535.31 Sq.mtr.

as per I.R.C. 67-2012 design. A warranty

for 7 years for the Retro reflective sheeting

from original manufacturer & a certified

copy of 3 year outdoor exposure test report

from third party test lab for the product

offered shall be submitted by contractor.

(B)Class B Type-4(MDR/ODR) retro

reflective sheeting

Road marking with hot applied

thermoplastic paints with reflectorising

glass beads on bitumin surface providing

and laying a hot applied thermoplastic

compound 2.5 mm thick including

reflectorising glass beads @ 250gms per

sqm area, thickness of 2.5mm is excluding

of surface applied glass beds as per

IRC:35-2015. The finished surface to be

level, uniform and free from streaks and

holes. zebra patta /bump patta lane/center

line/ edge line/cut patta. The white color

marking should provide liminance

coefficinet on cemend road shalll be min

130 mcd/m2/lux and Asphalt road shall be

min 100 mcd/m2/lux during the service life

during the day time. The marking should

meet the performance criteria for night time

reflectivity, wet reflectivity and skid

resistance as mentioned in the section-15

of IRC 352015. Warranty for the Retro

reflectivity should be two years.

CAT EYE/Pavement Marker(MNC two nail)

made out of acrylic StreneAcrylonitrile or hi-

impact poly Steren fitted with moulded of

metheacrylate(MNC)reflector cube corner

reflector design,filled with tightly adhering

pooting compound as per ASTMD-788 size

11.5x7x1.60 cms or 10x10x1.75 cms

provided with bituminous adhesive in

sufficient quantity with each unit fixing with

two shrank .Reflector on both side.Co

efficient of lumination as per specification

and compressive strenth 13 tones at

degree centigrade etc.B) Double side

Providing and fixing eco-friendly light

weight calcium silicate false ceiling tiles

having T egular edge & 15mm Thick

Densified edges on the Tile Periphery for

Extra Strength The Light weight calcium

silicate ceiling tiles shall have, light

reflection 85% non-combustible as per

B.S.476 part IV, 100% humidity resistance

and also having thermal conductivity 0.043°

w/m KC. for the best thermal Insulation.

The Light weight calcium Silicate tile shall

be of approved texture Fine fissured/

Spintone/ Cosmos having NRC value of

& Globe having NRC value of 0.75 NRC or

equivalent of size 595X595 mm to be laid

on true horizontal level suspended inter

locking metal grid of hot dipped galvanized

steel sections (galvanizing @ 120 grams

per sqm including bothside) consisting of

main ‘T’ runner suitably spaced at joints to

get required length and size of 24X38 mm

made from 0.30 mm thick (minimum) sheet,

1200 mm centre to centre, and cross ‘T’ of

size 24X28 mm made out of 0.33 mm

(Minimum) sheet spaced 1200 mm along

spaced between main ‘T’ at 600 mm

centre to centre to form a grid of

1200X600mm and secondary cross ’T’ of

length 600mm and size 24x28mm made of

0.30 mm thick (Minimum) sheet to be

interlocked at middle of the 1200X600mm

panel to form grid of size 600X600mm

resting on periphery walls / partitions on a

perimeter wall angle pre-coated steel of

size (24X24X3000mm made of 0.40mm

thick (minimum)

sheet with the help of rawl plugs at 450mm

centre to centre with 25mm long dry wall

screws @ 230mm interval and laying

15mm thick Densified edges light weight

calcium silicate ceiling tiles of approved

texture (Fine Fissured/ Cosmos/Spintone)

in the grid including, cutting /making

opening for services like diffusers, grills,

light fittings, fixtures, smoke detectors etc.,

wherever required, Main ‘T’ runners to be

suspended from ceiling using G.I. slotted

cleats of size 25X35X1.6mm fixed to ceiling

with 12.5mm dia and 50mm long dash

fasteners, 4mm G.I. adjustable rods with

galvanized steel level clips of size

85X30X0.8mm, spaced at 1200mm centre

to centre long main ‘T’ bottom exposed with

24mm of all T-sections shall be pre-painted

with polyester baked paint, for all heights,

, as per specifications, drawings and as

directed by engineer-incharge.Note:- Only

calcium silicate false ceiling area will be

measured from wall to wall. No deduction

shall be made for exposed frames/ opening

(cut outs) having area less than 0.30 sqm.

The calcium silicate ceiling tiles shall have

NRC. Value of 0.50 (Minimum) for Fine

fissured/ Spintone/ Cosmos and 0.75 NRC

for Globe, light reflection 85%

noncombustible as per B.S. 476 part IV,

100% humidity resistance and also having

thermal conductivity. 0.043° w/m KC.for the

best thermal Insulation

Providing and fixing single layer water proof

gypusm board 12.5 mm thick of the make

New good Group Co.Ltd. or equivalent &

New good Group Co.Ltd. company sections

using water proof board of size 1220 mm x

1830 mm x 8.0 mm suspended by G.I

suspender of size 25 mm x 3 mm with

intermediate channel of size 18mm x40mm

x0.80mm at 1220 mm center to center

66b 810 ceiling section of size 40mmx 35mmx 600.94 Sq.mt.

0.55mm at 457 mm center to center and

perimetre chanel A of size 20mm x 27mm x

30mm x 0.50mm at edges & drops

including paper taps and sofit cleat, anchor

fastener, scoch bolt connecting cleat joining

compound top coat on ceiling including

making necessary opening for light fitting,

diffuser etc. complete as per detail drawing

Providing and Fixing 6 mm thick Lexan

Polycarbonate multi wall roofing sheet fixed

67 10 with hilti screw and rubber silicon sealer 1427.62 sq.mt.

and alluminium strip of size 50 x 3 mm etc

complete as directed by Engineer in charge

Manufacturing,testing ,supplying

loading,,transporting to work site,loading

unloading lowering in trenches,laying and

jointing RCC NP3 class pipes in C:M 1:1

including all jointing materials such as

cement,sand,hemp bitumen as directed

testing the pipe line to a head of 1.5 mt and

hydraulic test as directed etc comp.

a 175 300 mm Diameter 616.07 Rmt

b 10 450 mm Diameter 806.25 Rmt

Constructing Bombay Pattern Type Catch

x 0.60 depth up to 1 mt including

excavation, B.B.C.C.

(1:5:10), 23 cms thick brick maso. wall in

the prop. of CM

(1:6) with 40 mm thick IPS flooring in the

bottom and 15 mm thick cement plaster

inside the catch pit in the proportion of CM

(1:3) with out jali etc. comp. as

CatchPit Jali Fixing P/F FRC catch pit jali

with frame 600mm x 600mm clear opening

etc. comp.. As directed by engineer in

PERCOLATION WELL

71 120 Drilling of pilot bore hole in Alluvial Strata 694.64 Rmt

by direct Rotary Rig of 250 mm.

72 120 Reaming 400 mm 212.50 Rmt

73 1 Electro Logging charges with carting 16071.43 Job

Providing and Installing 200 mm dia

74 60 IS:12818 upvc Casing Pipe "CM" class 1193.75 Rmt

75 1 Providing and Installing 200 mm dia 669.64 Set

IS:12818 upvc End Cap, with Air Vent cowl

200 mm dia Regular with 1.5 mm sloted

size cage type trapezoidal shape wire

wound little carbon galvanized screen

confirming to IS:8110

77 10 Supply of Pea sized Gravel 2029.46 Cmt

78 1 Air Vent of 50 mm Bend 401.79 Unit

79 120 Lowering and Removing of Dropline up to 147.32 Rmt

80 1 Air Compressor 60 CFM/150 PSI 22205.36 Ls

Estimate For Civil Work With

Percolation Well

I. No. Qty Items Unit Rate Per Amount

Electrical Work Estimate

1 INTERNAL WIRING

Point wiring for Light / Bell with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade

ZHFR/HRFR PVC insulated multi strand

copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type

switch / bell push & accessories and earth

1.1 continuity of following type, erected on

PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe

erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as

(f) with medium class Rigid PVC pipe and

395 accessories erected concealed in 505.05 Pt

wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 KV Grade ZHFR/HRFR

PVC insulated multi strand copper wires up

to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and

hum free EME four or more step type

electronic fan regulator with separately

mounted and accessories with earth

continuity of following type erected on PVC

/ Metallic/Wooden box, single mounting

base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

200 accessories erected concealed in 701.40 Pt

wall/ceiling complete

Point wiring for secondary light point with 2-

1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV

grade ZHFR/HRFR PVC insulated multi

strand copper wires, in below type of pipe

to be erected complete with earth

continuity and necessary connection with

1.3 primary light with accessories erected on

Metal / PVC / wooden box covered

covered with appropriate front plate

modules erected on / in wall / ceiling for

open / concealed wiring. with necessary

Lamp holder / ceiling rose / H.D.Connector

as directed.as per pipe erected with

following type of accessories.

Note:- Maximum up to 6 mtrs length,

excess will be considered as Mains for

Secondary Point.

(f) with medium class Rigid PVC pipe and

275 accessories erected concealed in 174.30 Pt

wall/ceiling complete

Point wiring for Individual Plug with & earth

wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade ZHFR/HRFR PVC

insulated multi strand copper wires up to

mtr length, in below type of pipe erected

1.4 complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic/Wooden

box covered with appropriate front plate

modules erected on / in wall / ceiling as per

pipe erected with following type of

[I] For 6A Plug and 6 a switch with 2-1.5

1.4.1 120 sq.mm Cu. Wire from nearby 530.25 Pt

switchboard/mcb db board

(f) with medium class Rigid PVC pipe and

accessories erected concealed in

wall/ceiling complete

1.4.2 50 [II] For 16A Plug and 16 amp switch with 2- 774.90 Pt

2.5 sq.mm Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in

wall/ceiling complete

[III] For 16A Plug and 16 amp switch with

1.4.3 15 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( 906.15 Pt

green) earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in

wall/ceiling complete

Point wiring for on board Looped Plug with

6A Modular type switch & 5 pin socket

erected on PVC / Metallic/Wooden box,

1.5 265 single mounting base frame covered with 255.00 Pt

textured / metallic/white front plate

modules erected on / in wall / ceiling with

following type accessories

Point wiring for Two Way Controlled Light

Point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of .ISI marked

KV grade ZHFR/HRFR PVC insulated

multi strand copper wires erected in below

type of pipe with 6A Modular type switches

1.6 and following type of accessories erected

on PVC / Metallic/Wooden box, single

mounting base frame covered with textured

/ metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected.

with necessary batten/angle holder or

ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

16 accessories erected concealed in 627.90 Pt

wall/ceiling complete

Providing following type of Modular Type

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

1.7 frame covered with textured / metallic/white

front plate , modules erected with

necessary connections as per site situation

directed by Engineer In charge.

1.7.2 40 (2) One No 5 pin plug 150.00 E.a.

1.7.3 90 (7) Blank Plate Single 25.00 E.a.

1.7.4 22 (8) Computer RJ-45 socket 159.00 E.a.

1.7.5 35 (9) 16 Amp. SP one way switch 179.00 E.a.

1.7.6 35 (10) 6/16Amp. Universal socket 198.00 E.a.

1.7.7 5 (13) 6A/10A/16A/20A/25A/32A Single pole 307.00 E.a.

Modular MCB Switch

Pole Modular MCB Switch

Supplying and erecting approved make

suitable panel indicator LED type lamp,

lens cover, complete erected with

necessary connections.

Providing and erecting ISI mark Medium

class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling

1.8 erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution

& Clamps with following dia of pipes, in

approved manner as directed

Providing & erecting PVC Corrugated

1.9 Flexible Conduit with required nos. of

coupling, PVC bushes, Check-nuts etc.

complete of following sizes.

providing and erecting Mains with ISI

marked electrolyte stranded copper

conductor, Non PVC Zero Halogen free fire

retardant insulated copper conductor,

insulated wire (HRFR) conforms to IS-694,

erected in existing pipe with 1.5sq. mm

copper conductor of same specifications for

earth continuity of following size.

In Existing medium class Rigid PVC pipe

and accessories

providing and erecting Mains with 1.1 KV

grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in

following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of

(A) with medium class Rigid PVC pipe and

(c) 2 wire 10 sq. mm (use earth wire of

1.11.2 20 (h) 4 wire 6 sq. mm 258.00 Mtr

(i) 4 wire 10 sq. mm (use earth wire of

providing and erecting Mains with ISI

marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS

1.12 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel,

relays, power switchgears, motor starters &

control wiring) with required size of copper

lugs, nuts and bolts if required.

1.12.1 25 (e) One wire 6.00 sq. mm 56.00 Mtr

1.12.2 40 (f) One wire 10.00 sq. mm 91.00 Mtr

1.12.3 10 (g) One wire 16.00 sq. mm 141.00 Mtr

1.12.4 10 (h) One wire 25.00 sq. mm 234.00 Mtr

1.12.5 20 (i) One wire 35.00 sq. mm 298.00 Mtr

1.12.6 20 (j) One wire 50.00 sq. mm 466.00 Mtr

1.12.7 40 (k) One wire 70.00 sq. mm 663.00 Mtr

1.12.8 40 (l) One wire 95.00 sq. mm 910.00 Mtr

Supplying and erecting Flexible PVC

1.13 insulated multi strand multi core 1.1 kv

grade ISI marked copper wires of following

size to be erected as directed.

1.13.1 110 e) 1.50 Sq.mm 3 core round PVC sheathed 46.00 Mtr

1.13.2 40 h) 2.50 Sq.mm 3 core round PVC sheathed 77.00 Mtr

1.13.3 55 k) 4.00Sq.mm 4 core round PVC sheathed 175.00 Mtr

Supplying & erecting M.S. Box having

Gauge painted with red oxide or Heavy

1.14 duty PVC box erected flushed on wall or

concealed in wall with necessary plastering

& finishing as directed of following size.

SUB - TOTAL OF INTERNAL WIRING

2 Switchgears , Panels , MCBDBs & MCBs

Providing and erecting Approved make

Three pole moulded case circuit breaker

having breaking capacity ICU of 25 K.A. at

415 V having normal current rating up to

2.1.1 25 A to 100A. with Fixed thermal &

magnetic release suitable to work on A.C.

supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected

in existing 16 G.M.S. housing.

3 ICS=100% of ICU only 5832.20 No

Providing and erecting Approved make

Three pole moulded case circuit breaker

having breaking capacity/strength ICU of

35 K.A. at 415 V. having normal current

2.1.2 rating 125A.with Fixed thermal & magnetic

release suitable to work on A.C.supply

c/s. with all internal connections, spreader

tinned copper & complete erected in

existing 16 G.M.S. housing.

3 ICS=100% of ICU only 6510.00 No

Providing and erecting Approved make

Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at

415 V. having Normal current rating

200A.with Microprocessor

release,Adjustable Overload Settings from

0.25 to 1 In (in steps of 0.01),Conforms to

IS/IEC 60947-2, suitable to work on

A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing

1 ICS=100% of ICU only 23288.45 No

Providing and erecting Approved make

Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. and

above at 415 V . having normal current

rating 250A. with variable thermal &

magnetic release suitable to work on

A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

1 ICS=100% of ICU only 22812.90 No

Providing and erecting Approved make

Four pole moulded case circuit breaker

having breaking capacity ICU of 50 KA and

above at 415 V having Normal current

rating 400A. with variable Thermal &

magnetic release suitable to work on

A.C.supply 50 c/s. With all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

1 ICS=100% of ICU only 27476.90 No

Providing and erecting Approved make

Four pole moulded case circuit breaker

having breaking capacity ICU of 50 K.A.

and above at 415 V having normal current

rating up to 630A. with Microprocessr

release Adjustable Overload Settings from

0.25 to 1 In (in steps of 0.01) ,Conforms to

IS/IEC 60947-2, suitable to work on

A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

1 ICS=100% of ICU only 40447.75 No

Providing and erecting Approved make

Earth fault Relay suitable to mount with

inter connection suitable to following size

of moulded case circuit breaker having CT

ratio & MCCB rating as following along

with shunt trip 220V AC. with all internal

connections & complete erected in existing

Design, fabrication, assembling, supply,

installation, testing and commissioning of

cubicle type, wall / Floor mounted LT panel

suitable for 415 V 3 phase, 4 wire 50 Hz

AC supply system fabricated in

compartmentised design from CRCA sheet

steel of 2 mm thick for frame work ,Doors

and partitions IP 42 and covers,3 mm thick

for gland plates i/c cleaning and finishing

complete 9 tank process in house facility

for powder coating in approved shade,

extendable type FP aluminium alloy

busbars of high condectivity, DMC/SMC

busbar supports, entire panel shall have a

common copper earthbar of size 25mm X

mm OR 50 x 6mm aluminium at the rear

with 2 Nos. earth studs, solid connection

from main busbar to switchgears with

require size of aluminium busbar & control

wiring with 1.5 sqmm FRLS insulated

copper conductor cable, cable alleys, cable

gland plates i/c accessrories as per

specification and providing switchgears,

metering instruments etc. for following

panel.G.A.Drawing to be approved by EIC

or consultant. ( Outgoing connectors must

be nut-bolt type. Outgoing mains for 63Amp

MCBs must be of 4 x 16sqmm cu flexible

wires).Incomers Mains for MCBs shall be

always from the busbars.

( a ) Providing cable clamps / supports

within distribution boards cable alley.

( b ) All hinged door shall be earthed

through 2.5 sq mm tinned b raided copper

( c ) Pad locking of MCCB’s handles in

“OFF” Position.

( d ) All the C.T.s should be auto short link

( e ) All the MCCB's should be with rotary

( f ) All incoming and outgoing air circuit

breakers shall be placed on middle portion

of the vertical in single tier formation.

( g ) Any descripancy found in SLD & Boq

it should be brought in the notice of the

client / consultant, and the decision will be

taken final by Client / consultant.

Providing and erecting Approved make

Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at

415 V. having normal current rating 125A.

2.2.1 with Fixed thermal & magnetic release

suitable to work on A.C.supply 50 c/s. with

all internal connections, spreader tinned

copper & complete erected in existing

G.M.S. housing.

4 ICS=100% of ICU only 7976.00 No

Providing and erecting Approved make

Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at

415 V. having Normal current rating

200A.with variable Thermal & magnetic

release suitable to work on A.C.supply

c/s. with all internal connections, spreader

tinned copper & complete erected in

existing 16 G.M.S.housing. Overload

release Range: 84 - 125Amp

1 ICS=100% of ICU only 16061.00 No

Providing and erecting Approved make

Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at

415 V. having Normal current rating

200A.with variable Thermal & magnetic

release suitable to work on A.C.supply

c/s. with all internal connections, spreader

tinned copper & complete erected in

existing 16 G.M.S.housing. Overload

release Range: 125 - 160Amp

1 ICS=100% of ICU only 16061.00 No

Providing and erecting Approved make

Three pole moulded case circuit breaker

having breaking capacity/strength ICU of

35 K.A. and above at 415 V. having Normal

current rating 200A.with variable Thermal

2.2.4 1 & magnetic release suitable to work on

A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

housing.Overload release Range: 125 -

1 ICS=100% of ICU only 15421.00 No

Providing and erecting Approved make

Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. and

above at 415 V . having normal current

rating 250A. with variable thermal &

magnetic release suitable to work on

A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

2 ICS=100% of ICU only 20739.00 No

Providing and erecting Approved make

Three pole moulded case circuit breaker

having breaking capacity ICU of 25 K.A. at

415 V having normal current rating up to

2.2.6 25 A to 100A. with Fixed thermal &

magnetic release suitable to work on A.C.

supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected

in existing 16 G.M.S. housing.

3 ICS=100% of ICU only 5302.00 No

Providing and erecting Approved make

Four pole moulded case circuit breaker

having breaking capacity ICU of 50 K.A.

and above at 415 V having normal current

rating up to 630A. with Microprocessr

release Adjustable Overload Settings from

0.25 to 1 In (in steps of 0.01) ,Conforms to

IS/IEC 60947-2, suitable to work on

A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

1 ICS=100% of ICU only 37658.25 No

providing and erecting Approved make

Earth fault Relay suitable to mount with

inter connection suitable to following size

of moulded case circuit breaker having CT

ratio & MCCB rating as following along

with shunt trip 220V AC. with all internal

connections & complete erected in existing

providing and erecting Miniature circuit

breaker single pole 0.5A to 2A system and

2.2.9 20 having breaking capacity 10 KA to be 268.00 No

erected in existing box. confirming to IS

8828/1996 with ISI Mark

providing and erecting Miniature circuit

breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996

Providing & erecting 240 V MCB double

pole switch for motor & inductive load (C

2.2.11 Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having

following capacity

Providing & erecting 415 V MCB Four Pole

for Motor & Inductive Load (C Curve)

2.2.12 having 10KA breaking capacity & confirms

to IS :8828 in existing box having following

2.2.13 Providing and erecting following additional

parts for panel mounting MCCBs

(A)Extended operating rotary handle with

2.2.13a 12 pad lock with three position trip,off,on 865.00 No

suitable for 25A to 250 A panel mounting

(B)Extended operating rotary handle with

2.2.13b 1 pad lock with three position trip,off,on 1298.00 No

suitable for 400A to 630 A panel mounting

Supplying and erecting approved make

panel mounting type Digital Voltmeter

having 3 digits LED display, 0 to 750 AC

Volts range erected on existing panel

board with all connection, wiring etc .with

manufacturers calibration certificate.

Supplying and erecting approved make

panel mounting type Digital Ammeter

having 3 digits LED display, external CT

operated, calibrated for 0 to 1000 Amps

suitable to operate on 500 Volt AC

erected on existing panel board with all

connection, wiring etc .with manufacturers

calibration certificate.

Supplying and erecting Ammeter /

Voltmeter selector switch for 3 phase AC

Supply 500 V on existing panel board with

necessary connections.

Providing & erecting L.T. Current

Transformer with bar primary 50/5 to

2.2.17 15 1000/5 ratio 15 VA burden erected in 272.00 No

existing CRCA box duly secured with

insulating materials connected to the meter

Supplying & erecting approved make

Power Factor Meter 150mm dia

flush/projection type/ balanced &

unbalanced load to work with appropriately

provided CT’s 100/5A to 400/5A ratio &

other accessories complete erected in M.S.

box & connected to the circuit by means of

PVC copper Core leads.

Supplying and erecting approved make

suitable panel indicator LED type lamp,

lens cover, complete erected with

necessary connections.

Providing and erecting metallic vitrified

danger notice board as per language

2.2.20 4 suggested by engineer incharge for 69.00 No

MEDIUM VOLTAGE installation to be

erected as per IS-2551.

Providing and erecting required size

Aluminium strip for earthing of H.T. , OCB /

ACB / Transformer, LT panel board, Motors

etc. using copper clamp.

Providing and erecting required size

Copper strip for earthing of H.T. OCB /

ACB/ Transformer, LT panel board, Motors

etc. using copper clamp.

providng and erecting Approved make

2.2.23 3 energy meter 3 phase 4 wire unbalanced 2179.00 No

load 500 V. 5 to 10A complete erected as

directed with necessary earth wire.Class-1

Providing , erecting , fabricating the M.S.

structure as per requirement on site

incorporating proper size of M.S.

angles,square,round, flats, bars, channels,

sections complete with cutting, welding,

grinding & finishing duly painted with one

coat of red oxide with erection on site as

per direction of engineer in charge with

necessary grouting, cementing, plastering

& finishing complete.

Supplying and erecting triple pole & neutral

440V/ 500V panel mounting Aluminium

Busbars with four equal Nos. of bus having

current density not more than 0.8 Amp. /

sq.mm (Rated current / cross section area)

2.2.25 duly wrapped with colour insulating tape for

phase sequence of following current

carrying capacity, erected with necessary

bus bar supports /insulators, main cable

socket to each busbar,erected in existing

cubical panel with necessary connections.

2.2.25a 10 (A) Suitable for 100 Amp. Capacity 654.00 RnMtr

2.2.25b 18 (B) Suitable for 200 Amp. Capacity 1027.00 RnMtr

2.2.25c 18 (C) Suitable for 300 Amp. Capacity 1455.00 RnMtr

2.2.25d 30 (E) Suitable for 630 Amp. capacity 3031.00 RnMtr

Providing & erecting weather proof, dust &

vermin proof, floor mounted front operated

indoor type cubical panel board necessary

IP-42 and above protection as per

approval from engineer incharge made

from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with

necessary accesories , supporting angles/

flats channel including cutting, bending,

drilling, welding, riveting with internal

partitions & cable alley as per requirements

& instruction of engineer-in-charge with

supplied switch gears, BUSBARS, suitable

size of inter connecting PVC copper wire /

copper-aluminium strips, rubber grommets,

rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth

bolts, foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles

with locking arrangement and rubber

gasket,heavy duty end terminal

connection,danger notice board,necessary

ventilation,earthing strip complete. The

Panel shall be painted with epoxy powder

(The rates excludes the cost of

switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters,

Fuses etc. The dimension shall be

measured excluding base beams) The

panel shall be supplied with following

approved manufacturers with following

(B) The standard companies switch gear

shall be used and only manufacturers at

CPRI approved factory

12 (i) with 350mm depth 14755.00 Sqmtr

Supplying & erecting XLPE(IS:7098)(I)-88

2.2.27 ISI unarmoured copper cable 1.1 KV grade

to be erected as directed of following size.

2.2.27a 40 (N) 4 core 16 Sq. mm 721.00 Mtr

2.2.27b 50 (M) 4 core 10 Sq. mm 568.00 Mtr

2.2.27c 12 (L) 4 core 6 Sq. mm 361.00 Mtr

2.2.27d 90 (C) 2 core 6 Sq. mm 202.00 Mtr

2.2.27e 20 (B) 2 core 4 sq.mm 130.00 Mtr

providing and erecting Mains with ISI

marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS

2.2.28 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel,

relays, power switchgears, motor starters &

control wiring) with required size of copper

lugs, nuts and bolts if required.

2.2.28a 300 (a) One wire 1.00 sq. mm 12.00 Mtr

2.2.28b 120 (b) One wire 1.50 sq. mm 17.00 Mtr

2.2.28c 100 (c) One wire 2.50 sq. mm 27.00 Mtr

Design, Supplying, installing, testing of

factory fabricated ready made Three phase

APFC Panel Cubical Panel fabrication

should be type tested as per IEC

61439:1&2 Capacitor Duty Contactor for

switching as per following Steps Incomer

Switch of MCCB type Icu=Ics=50KA at

400/440 Volts, with OC, SC, internal earth

fault protection Incomer Switch of MCCB

type Icu=Ics=50KA at 400/440 Volts, with

OC, SC, internal earth fault

protection,Copper tinned insulated

Busbar,Cubical panel should be indoor type

with IP 43 and IK 10,Metalized

2.3 polypropylene film tye3-phase 528-550Volt

Capacitor,De tuning Reactor for each

capacitor,Panel having Short Circuit and

Overload protection,Each step Capacitor

having suitable MCB with Sc, OL, internal

earth fault relay,Each stage having Stage

Contactor (Capacitor load rating),PF

regulator master controller having suitable

steps with LCD display, Rs

Communication port, Indication LED Lamps

for main incomer and ON-OFF for each

capacitor bank,MS Chanel for Floor

mounting, Cable entry as per site

situation,Cooling fans for panel, ( STEPS-

Supplying & erecting approved make IP

grade Company fabricated Timer Panel of

following capacity for switch On-Off street

lights on time scheduling basis made from

16G CRCA sheet duly epoxy power painted

inside and outside with hinged doors and

2.4 locking arrangement consisting of suitable

size of 4 Pole MCB and 4 pole contactor

(cat-III)with analog time switch, auto

manual switch of same make and suitable

input and output Bakelite terminals and with

door earthing approved by Engineer in

MCBDBs and MCBs

providing and erecting Miniature circuit

breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996

Providing & erecting 240 V MCB double

pole switch for motor & inductive load (C

2.6 Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having

following capacity

Providing & erecting 415 V MCB Four Pole

for Motor & Inductive Load (C Curve)

2.7 having 10KA breaking capacity & confirms

to IS :8828 in existing box having following

Sheets steel powder coated enclosure

2.8 4 suitable for incorporating One/Two nos. 175.00 E.a.

Providing and erecting Sheet Steel powder

coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB

to house appropriate nos. of MCBs.(The

DBs should be used of same company of

MCB to be used) suitable for

(A) single phase incoming and horizontal

single phase outgoing

(b) sheet steel double door (IP-43)

2.9.1 4 (i)4 way ( concealed manner ) 747.60 E.a.

2.9.3 5 (iii)8 way ( concealed manner ) 1369.20 E.a.

2.9.5 18 (iv)12 way ( concealed manner ) 1773.60 E.a.

(B) three phase incoming and single phase

2.10. horizontal type outgoing Per phase

isolation type (PPI)

(b) sheet steel double door

2.10.1 10 (i)4 way ( concealed manner ) 2779.20 E.a.

2.10.3 2 (ii)6 way ( concealed manner ) 3462.00 E.a.

2.10.5 9 (iii)8 way ( concealed manner ) 4054.80 E.a.

Supplying & erecting Sheet Steel powder

coated Cable end termination Box to be

mounted on Top or Bottom of the MCB

Distribution Box for housing/covering Extra

wires & Cables, suitable for following size

(G) Three Phase 8 Way ( concealed

2.11.2 2 (G) Three Phase 8 Way 683.00 E.a.

Providing and erecting Sheet Steel powder

coated Vertical MCB distribution board

(VTPN) - flush / surface mounted double

door (IP54) fitted with copper insulated

busbar, isolated neutral bar, earth bar and

2.12 DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3, suitable for 250 AMP TPN

MCCB + RCCB as incomer and three

phase outgoing as per following .(The DBs

should be used of same company of MCB

2.12.1 1 (A)4 way outgoing 13315.00 E.a.

2.12.2 1 (B)6 way outgoing 15450.00 E.a.

2.12.3 1 (C)8 way outgoing 17078.00 E.a.

Providing & erecting 415 V MCB three Pole

for Motor & Inductive Load (C Curve)

2.13 having 10KA breaking capacity & confirms

to IS :8828 in existing box having following

providing and erecting Approved make

ELCBs / RCCBs conforming to IS:

and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and

suitable for operation on single phase

V,50Hz. having characteristic of quick

action & tripping with all advance feature &

do not incorporate any electronic

component. for following Max. rating

erected as directed

Providing and erecting metallic vitrified

danger notice board as per language

2.15 45 suggested by engineer incharge for 69.00 E.a.

MEDIUM VOLTAGE installation to be

erected as per IS-2551.

Providing & erecting Medium Voltage

Danger Notice Board sticker as per

language suggested by engineer incharge

of standard size as per IS-2551

SUB - TOTAL OF Switchgears , Panel

Follow IS code :3043 is the guideline for

Providing and erecting required size HOT

3.1 350 deep Galvanised iron strip for earthing of 77.00 KG

H.T. , OCB/ ACB/ Transformer LT panel

board, Motors etc. using proper clamp.

Providing and erecting required size

Copper strip for earthing of H.T. OCB /

ACB/ Transformer, LT panel board, Motors

etc. using copper clamp.

3.3 15 Providing and erecting Annealed bare 787.00 KG

Copper wire 8 to 16 SWG.

3.4 80 Providing and erecting HOT deep 77.00 KG

Galvanised iron strip wire 8 to 16 SWG.

Supplying & erecting earth pit of minimum

bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes having

Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising,

connection terminal dia of 12mm with

constant ohmic value surrounded by highly

conductive compound with high charge

3.5 dissipation suitable for following type of

applications with chamber and heavy duty

cover.(approved make OEM has to submit

test certificate) & having back filling

compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 W/ meter

testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should

be capable to retain moisture for long time

Necessary test report must be submitted.

(a) For Electrical Installation up to 440V in

3.5.1 4 Length of pipe - 1 Mtr 4546.00 E.a.

Back filling compound - 1 Nos Bag of

(c) For Electrical Installation covering

Transformer Neutrals, Lightning arrester

Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA) i.e

independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of

Supply, installation,testing and

commissioning of Chemical Earthing with

UL Certified 17.2mm Dia. X 3000mm Long

254 Micron-Copper bonded M.S. Rod

manufactured as per IEC 62561-2 with

25Kg Bentonite powder plus " U " bolt rod

clamp complete with Lockable high

performence chamber suitable & tested for

5000T capacity with SS Hardware.or

Supplying & erecting funnel type earthing

having earth plate of following size burred

in specifically prepared earth pit 3 mtr.

below ground with 40 kg. charcoal and salt

with alternate layers of charcoal & salt,

20mm.dia. G.I. pipe with Funnel with a

wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para

3.7 of IS 3043 with necessary length of double

Galvanised Iron / copper earth wire No

SWG bolted with lug to the plate and

covered in 12 mm dia. G.I. pipe 2.5 mtr

long complete connected to the nearest

switch gear with end socket as per direction

& duly tested by earth tester confirming to

IS (As per drawing) with following

(C) with 60 x 60x 0.315 cms. Copper earth

SUB - TOTAL OF Earthing

4 CABLES, Cable Termination and cable

Providing and erecting XLPE(IS:7098)(I)-88

ISI armoured cable multistrand Aluminium

4.1 conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench

/ pipe of following size of cables

(B) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm

(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm

(F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-

88 ISI armoured cable multistrand / Solid

4.2 Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing

trench / pipe of following size of cables

4.2.1 65 (a) 4 core 4 Sq. mm 116.00 Mtr

4.2.2 360 (b) 4 core 6 Sq. mm 125.00 Mtr

Providing and erecting XLPE (IS:7098)(I)-

88 ISI armoured cable multistrand

4.3 Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing

trench / pipe of following size of cables

4.3.1 85 (d) 4 core 16 Sq. mm 152.00 Mtr

Providing and erecting XLPE(IS:7098)(I)-88

ISI armoured cable multistrand Copper

conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench

/ pipe at road crossing or floor of following

4.4.1 30 (C) 3 core 6 Sq. mm 392.00 Mtr

4.4.2 70 (D) 3 core 10 Sq. mm 495.00 Mtr

Supplying & erecting XLPE(IS:7098)(I)-88

4.4.3 ISI unarmoured copper cable 1.1 KV grade

to be erected as directed of following size.

35 (I) 3 core 16 Sq. mm 557.00 Mtr

Providing and erecting XLPE(IS:7098)(I)-88

ISI armoured cable multistrand / Solid

Copper conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing

trench / pipe at road crossing or floor of

following size of cables.

4.5.2 35 (B) 4 core 4 Sq. mm 361.00 Mtr

4.5.3 50 (C) 4 core 6 Sq. mm 505.00 Mtr

Providing and erecting XLPE(IS:7098)(I)-88

ISI armoured cable multistrand Copper

conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench

/ pipe at road crossing or floor of following

size of cables.

4.6.1 80 (D) 8 core 2.5 sq.mm 315.00 mtr

Making trench in soft soil of suitable width

of 90 cm deep for laying cable or locating

4.7 240 the fault all over the run and back filling the 55.00 Mtr

same and making the surface as normal

Covering of cable with second class bricks

or cement tiles laid cover the cable

4.8 40 crosswise & also on both sides with 139.00 Mtr

covering of 7. 5 Cm. layer of sand above &

below cable (16 bricks per meter)

( A )Making trench in Hard Murrum / Tar

Road of suitable width of 90 cm or required

depth for laying any size of cable or

locating the fault all over the run and back

filling the same and making the surface as

4.10. 5 (B) If additional machinery like hammer 354.00 Mtr

driller or JCB use [Add]

Drilling the road without breaking the road

surface (Asphalt) for laying of cable for

4.11 feeding power supply by making up to

following size of holes at both ends

4.11.1 5 (A) Up to 100 mm bore dia 488.00 Mtr

4.11.2 5 (B) Up to 150 mm bore dia 610.00 Mtr

Supplying following size of Light duty “A”

4.12 Class G.I . Pipe & erecting as directed by

Engineer-in-charge.

10 (A) 25 mm dia 171.00 Mtr

Providing & laying. R.C.C. Hume pipe for

cable to be laid 90 cm. below ground

4.13 across the road crossing or on floor with

necessary material in an approved manner

and making the ground as per original.

Providing & laying approved make Double

walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II

4.14 )with necessary connecting accessories of

same material at required depth in existing

trench for laying of cable. below ground /

road surface for enclosing cable

4.14.1 100 (A)50 mm outer dia 62.00 Mtr

4.14.2 285 (B)63mm outer dia 73.00 Mtr

4.14.3 50 (C))90 mm outer dia 95.00 Mtr

4.14.4 40 (D)120 mm outer dia. 136.00 Mtr

Providing & laying approved make ISI

marked Rigid PVC pipe having 6Kg / cm2

(Class-3) to be erected at road crossing on

or floor as directed for laying of cable. The

pipes as following size of dia & weight per

4.15.1 5 (D) 75 mm inner Dia. (5.5 Kg/6RMT) 124.00 Mtr

4.15.2 5 (F) 110 mm inner Dia. (11.63 Kg/6 RMT) 234.00 Mtr

Providing and, fixing heavy duty flange type

brass cable gland with rubber ring for PVC

4.16 insulated armoured cable complete with out

going tails, insulating tape etc for following

size of cables.

Providing and, fixing heavy duty flange type

brass double compression type cable

gland with rubber ring for PVC insulated

armoured cable complete with out going

tails, insulating tape etc for following size of

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of

following size evenly crimped with high

pressure tool & connected to switchgear

terminals with brass/cadmium plated nut

bolts in an approved manner.

Solder less crimping type Copper lugs

conforming to IS suitable for cable of

following size evenly crimped with high

pressure tool & connected to switchgear

terminals with brass/cadmium plated nut

bolts in an approved manner.

Providing and fixing approved make

Perforated C type cable tray. Made from

sheet steel. The cable tray should be single

or double bended as per required and as

per IS 2062/1079 and shall be coated with

hot dip galvanizing as per IS 2629/4759.

with max 17.5% perforation with coupler

plate / Fish plate and GI hardware like nut -

bolt and washers etc. erection with

necessary support( included) as per

Specification and as per instruction of

engineer in charge..

SUB - TOTAL OF Cables,Cable

Terminations & Cable Trenches

5 Light Fixtures & Fans

Supply , Installation, testing and

commissioning of pre-wired, LED

fitting/post top luminaries etc of all types,

complete with all accessories and tube etc.

directly on ceiling/ wall, including

connection with 1.5 sq. mm FRLS PVC

insulated, flexible, copper conductor, single

core cable with flexible conduits and

coupler and earthing etc. as required.

Note:- The LED Light fixtures should

comply all international standards third

party ( LM 79 for complete fixture, LM

for individual LED ). The Manufacturer /

Channel Partner of the Manufacturer has

to submit 4- Years unconditional free

Replacement Guarantee for complete

Supplying and erecting LED indoor fittings

with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with

housing used as a heat sink shall be made

of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion

resistance with diffuser with company

mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%,CCT 3000 K

to 6500K, Luminaire efficacy>

lumens/watt , LED driver efficiency > 85 %(

fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select

any wattage capacity between the ranges

( A ) Tube Light with integral / non integral

5.1.1a 10 (iii) 18-20 Watts, Surge - 2KV,IP-20, 293.00 No

conventional 2/ 4 feet

5.1.1b 25 (v) 36-40 Watts, Surge-2 KV, IP-20, 530.00 No

conventional 4 feet

(B) LED Panel Light with provision for

5.1.2 Plane front frame with translucent cover

fixed to housing complete.IP20

5.1.2a 42 (i)up to 8 Watts,4" x 4", Surge-2 KV 271.00 No

5.1.2b 290 (iii) 12-15 watts, 6" x 6", Surge-2 KV 462.00 No

5.1.2c 100 (iv) 18 to 20 watts, 8" x 8", Surge- 2 KV 607.00 No

5.1.2d 95 (vi) 36 watts, 24" x 24", Surge- 2KV 1777.00 No

5.1.3 (G) Spot Light 425 Lumens, Surge-2KV

5.1.3a 5 (a) 3 to 7 Watts 805.00 No

5.1.4 18 (H) Mirror Light 9 Watts, wall mounted 309.00 No

minimum 1 feet long

(I) Adjustable spot light with COB led

5.1.5 having aluminium reflector of following

5.1.5a 4 (ii) 12 Watts 957.00 No

5.1.5b 6 (iii) 15 Watts 1087.00 No

Providing & erecting Approved make Power

Saving 50 Watt Ceiling Fan with double ball

bearing ISI mark with Condenser 230 volt

A.C. 50 Hz 1200 mm sweep complete

having 3blades with aluminium blades with

, canopy & 30 cm. down rod erected with

earthing.(Make shall be approved by

Engineer in charge))

Providing & erecting Approved make

Ceiling Fan with double ball bearing ISI

mark with condenser A.C.230V 50c/s.

5.3 50 mm. sweep complete, canopy erected on 1721.00 No

existing hook or clamp with earthing [

Make shall be approved by Engineer in

Providing & erecting Approved make

Ceiling Fan with double ball bearing with

Condenser 230 volt A.C.50 Hz. 900 mm

sweep complete having 3 Aluminium

blades, canopy erected complete. [ Make

shall be approved by Engineer in Charge]

Supplying and erecting approved make

oscillating type medium duty bracket fan

with Aluminium Blades A.C. 23OV. 50cy/s

wall mounted with height adjustment and

5.5 4 rotary tilting device complete with guard, 2329.00 No

mounting accessories kit, pull cord for

speed and oscillation flexible Core plug top

complete erected with lead wires as

directed. 400MM.

Supplying & erecting approved make low

noise decorative exhaust fan having size

5.6 50 200mm with 1350 RPM with square frame 1687.00 No

ABS body with inbuilt lowers & square

Supplying & erecting fan hook box of

mm M.S. round bar bounded to the RCC

bars up to 50mm length each side and

5.7 175 pierced through a 16 Gauge M.S. box / 107.00 No

Heavy Duty PVC box complete erected

concealed in Ceiling with necessary

5.8 175 Providing 2.5mm.thick laminated acrylic 18.00 No

sheet to cover the fan hook or Fan box.

Supplying and erecting 19 / 20 mm.

nominal bore Medium Class M.S. Pipe

5.9 175 down rod erected duly painted for fan 107.00 Mtr

complete with proper insulation without

leakage and earthing.

Supplying & erecting single phase

approved make industrial exhaust fan

suitable for medium duty ring mounted low

noise operation suitable for medium duty

having following dia size and maximum

1 [D] 450 mm dia 900 RPM 3306.00 No

5.11 1 Providing suitable M.S. louver shutter of the 365.00 No

Supplying & erecting electro galvanised

G.I. wire micro mesh jali cover of grade

5.12 1 required size with suitable wooden frame 628.00 Sqmtr

duly fitted in wall outside of exhaust fan for

insect protection.

Providing and erecting PVC body surface

or pendent mounting LED Bulk type 9 watt

Lighting Fitting with electronic driver. And

lumen output from luminaire 720lm , input

voltage range 90-300VAC , 50Hz cool

white(3000 to 6500k), inbuilt driver, -

20degC to +60degC working temperature,

AL frame with Beam Angle 120deg

SUB - TOTAL OF Light Fixtures & Fans

6 External lighting

Supply , Installation, testing and

commissioning of pre-wired, LED fitting

/post top luminaries etc of all typesof

external lights, complete with all

accessories and tube etc. directly on pole /

pole bracket , including connection with

/ 2.5 sq. mm FRLS PVC insulated,3 core

flexible, copper conductor, with flexible

conduits and coupler and earthing etc. as

Supplying and erecting LED street light /

Flood light fittings with High power White

LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free

High pressure die cast aluminum housing

with smooth finish powder coated and heat

sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with

toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED

driver efficiency > 85 %.( fittings required

LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage

capacity of LED fittings.The Engineer

incharge may select any wattage capacity

between the ranges shown.)

(A) Street Light (IP-65), Surge protection -

4KV /5000K integral and 10 kv non integral

6.1.1 ,Light must have 440VAC line supply

protection. It should withstand 48 hours for

440VAC line supply.

(f) Above 60 watts to 90 watts ( Required

(B) Flood Light (IP-65), Surge -4KV/5000K

,Light must have 440VAC line supply

protection. It should withstand 48 hours for

440VAC line supply

6.1.2.a 12 (c) Above 60 watts to 90 watts 6028.00 No

6.1.2.b 4 (v) above 120 to 160 watts 8370.00 No

Supply of approved make frp/grp pole

having followiing specifications :

FRP/GRP pole made by centrifugal

moulding process using thermoset resin

polyester/epoxy resin system having

minimum glass content 45.0%.The pole

should be in one pieceand tapered round in

shape,having smooth outside surface finish

and should be totally fre from corrosion as

well as non conductive and shock proof.

Pole should be provided with FRP/GRP

base bracket dully fabricated from

6.2 metal(M.S) and dully claded with FRP/GRP

material to avoid any metal exposer and

painted with PU paint.

Pole should mechanical properties i.e

Specfic gravity (ASTM D 792) 1.3‐1.8

Kg/m3, 2. Glass Content % by weight

absorption (ASTM D 570) <0.5%,

Tensile Strength(ASTM D 638) 200+/‐

50Mpa, 5. Flexural strength (ASTM D 790)

250+/‐50Mpa, 6. Compressive Strength

(ASTM D 695) 200+/‐50MPa, 7. Yeild

Strength(ASTM D638) 250 +/‐50MPa.

Pole should be flame retardant as per IS

6746.Resin used shall be UV resistance

and pigmented. Pole should be painted

with first coat of epoxy primer and then two

coat of highly weather resistance

polyurethen paint to ensure proper

addhesion of the paint.Minimum thickness

shall be 80 to 100 micron.Defelection of the

pole shall not exceed more than 10.0 % of

the length of the pole for the given

load.Pole should be generally made as per

the dimensional data,performance criteria

and some interchagebility features of poles

as per the standard ANSI C123.20 latest

version of ASTM D 923/01 including cable

termination box with necessory

accessories.The size of pole and type of

installation with foundation , Anchor Base &

Internal junction box as per the

manufacturer details and site requirement .

The cost of 6 Mtr & 10 Mtr pole's Flood light

mounting ring is included.

(3) 'B' class (Heavy Duty) frp/grp pole

suitable for base plate mounting

[D] Overall Length of 6.0 meter, Average

thickness : 7mm, Top/Bottom Outside Dia.

76/176mm +/‐2.Weight of Pole 25.0 Kg

14 approx. (Without base) Metal Anchor Base 16815.00 E.a.

dully frp claded (Size : 340 Ø * 12mmthk

Mounting hole PCD 285mm * 6 nos. of

Providing FRP/GRP arm bracket of having