OPEN GYM EQUIPMENTS, JHULA, IRON BENCHES FIXING WORK AT VARIOUS PARKS OF ZONE SOUTH

Amount

Sea saw four seater stand pipes made up of 100 mm nominal bore 3.00 mtr long and 0.45 mtr high from ground level with two nos sea saw planka of 100 mm nominal bore structural steel tubular Pipe 3.0 mtr long pipe comprised with 4 nos 5mm thick M.S. Seat and other supporting elements of structural steel tubular Pipe. Sea saw four seater have two nos specially designed ball bearing system each ball bearing system contain two nos ucp 205 casted ball bearing assemblly , one nos 27mm x 150 mm long bearing shaft for smooth movemnet all Nut and Bold Jointed, painted in multi colour for dazzling look. Sea Saw four seater fixed in ground with CC mix (1:2:4) size 30x30x45 cm including exacavation of earth as per required work completed as oper direction of engineer in chaerge and specified notes. Work done as per Drawing direction of engineer in charge and specified notes.

Providing and fixing of four seater merry go round having structural steel tubular Pipe100 mm nominal bore 1.2 mtr. long pipe & 0.60 mtr. from ground level jointed with four nos arm of 100 mm nominal bore structural steel tubular Pipe 1.2 mtr. long pipe seats supports pipe should be 25 mm & 50mm nominal bore structural steel tubular Pipe & 5mm thick M.S. seat. Merry go round four seater have one nos specially designed ball bearing system ball bearing system contain 6306 and 6308 double zet permanetly lubricated ball bearing one nos 27mm x 150 mm long G.I. bearing shaft for smooth movemnet all Nut and Bold Jointed, painted in multi colour for dazzling look. Four seater merry go round fixed in ground with CC mix (1:2:4) size 0.60x0.60x0.60 cm including exacavation of earth as per required work completed as oper direction of engineer in chaerge and specified notes. Work done as per Drawing direction of engineer in charge and specified notes.

Provinding and fixing of double swing top pipe made of structural steel tubular Pipe up to100 mm nominal bore, 3.0 mtr Long jointed with four nos legs of 100 mm nominal bore 3.00 meter long pipe after installation 2.40 mter with the help of specially designed trapeze shape 50 mm structural steel tubular Pipe bouble swig have two nos specially designed ball bearing system each ball bearing system contain two nos ucp 205 casted ball bearing assembly , one nos 27 mm x 600 mm long MS solid bearing shaft and two nos press bented (1)hoocks for hanging chain seats chain should be minimum 6 mm thick electro galvanised tested jointed with M.S. Sheet 5mm thick for safe and cofortable swing all Nut and Bold Jointed, painted in multi colour for dazzling look Double swiing fixed in ground with cement concrete mix 1:2:4 size 30x30x45 cm including exacavation of earth as per required work completed as per direction of engineer in change and specified notes. Work done as per Drawing direction of engineer in charge and specified notes.

Deluxe Slide made of 3 mm thick M.S. Sheet joint less bend in (C ) channel the length of slide 3mtr. and width 0.45 mtr. jointed with 25mm nominal bore Structural steel tubular Pipe and verticle post of 100mm Structural steel tubular Pipe 2.5 mtr. long. Pipe railing, ladder made up of 25mm & 50mm nominal bore Structural steel tubular Pipe. All Nut and Bold Jointed, painted in multi colour for dazzling look. Deluxe slide fixed in ground with cement concrete mix (1:2:4) size 30x30x45 cm includig exavation of earth as per required. Work done as per Drawing direction of engineer in charge and specified notes.

Providing & Fixing of Rabbit Spring Rider Arihant's Model PGKD 23 or equivalent Product Area : 0.8m x 0.4m (2.6ft X 1.3ft) Safe Play Area : 1.8m x 1.4m (5.9ft X 4.6ft) Ideal For : 3-6 Years Friends at a time : 1 Rider Its required area 1.0 mtr x 0.8 mtr. Total height 0.5mtr from ground level. Leg support should be made by 40 mm IDGI pipe & handle made by 15 mm NB pipe. The typical Spring Rider is comprises of Flexible Spring & HDPE sheets of high quality. It‟s specially made for kids in between 3 to 8 yrs. It‟s designed specially keeping in mind growing kid‟s mental development aspects & safety aspects. Playing on this spring rider will enable the kids to develop coordination between force & balance which is required for proper mental development. It also enhances griping power of children which will in turn strengthen growing bones. The rest is only fun that‟s required for emotional development of a children.

SKY WALKER • DIMENSIONS: - 1720mm (Length) x 630mm (Width) x 1750mm.(Height) • SAFE AREA: - 2.7Mtr x 1.6Mtr. • SkyWalker Equipment made from "C" class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The main frame pipe is of 80mm NB made from "C" Class G.I. Material which is bend at the radius of 250mm. • The leg movement frame is of 50 x 50mm x 3mm thick CRC square pipe. • Sleeves are made up of 100 mm OD M.S. pipe with thickness 5mm. This results in easy replacement of bearings, pins and handle. • The handle frame is of 25mm NB made from "C" Class G.I. pipe. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB "C" class. Welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Two foundations are provided for rigid support. • The footrests made from Aluminum casting material of size 130 X 310 X Smm. • Closing Caps are made up of high quality Fiber reinforced Plastic material. • The pins used are made up of 0 25mm SAE8620 bright material. Pins are fixed at the outer end with M8 grub screws and Dia.8mm SS ball. • The bearings used are "6205zz" are permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nuts & bolts are used for assembly. • The cerclips used for assembly are of A24 type. • The powder coating is done with Pure Polyester powder of Ackzo n o bl e or Berger with 60 to 70 micron thickness.

LEG PRESS • DIMENSIONS: - 1840mm (Length) x 360mm (Width) x 1560mm. (Height). • SAFE AREA:- 2.8 x 1.4Mtr. • Leg Press equipment made from "C" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The center pipe is of 100mm NB made from "C" Class G.I. pipe. • The Sleeve frame is of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve can be disassembled from main frame. • The bottom support of M.S. round plate of 0250 mm & 10mm thick. • The remaining outer frame is of 32NB made from "C" class G.I. pipe. • The foundation used for fixing is structure and made from center pipe of G.I. of 80mm NB "C" class welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angle of 3 mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness. • Seat & Back rest provided are made up of MS deep draw quantity of 2mm thickness with no joint with uniform outer edge radius 20mm. • The footrests are made from tasted Aluminum material, having sizes 130mm X 310mm X 5mm thick. With the support of 310mm X 130mm X 3mm thick MS plate. • The frame of footrests made up of 25 NB "C" class G.I. pipe. • Closing Caps are made up of high quality Fiber reinforced Plastic material. • To build structure bushes are used which are made from M . S . seamless pipe of 50mm O.D. and 5mm thickness. • The pins used are made up of 025 mm SAE 8620 bright material. • The bearings used are of "6205zz" permanent lubricated sealed bearing of reputed Brand. • High tensile steel with galvanized nut bolts are used for assembly. • The cerclips used for assembly are of A24 mm. • The powder coating done with Pure Polyester powder of Ackzo n o b le or Berger with 60 to 70 micron thickness.

ROWER • DIMENSIONS: - 1200mm (Length) x 1000mm (Width) x 920mm. (Height) • SAFE AREA: - 1.5Mtr. x 1.5Mtr. • Rower Equipment made from "C" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The Main frame is of 80NB "C" class G.L. Pipe welded with M.S. round plate of 250mmX1Omm. • The handle frame 2 5 N B is made from "C" class G.I. pipe. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB "C" class Welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • To join the movement frame to main frame connecting links made up from 32 NB G.1. "C" class pipe. • The seat fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. • Pins used of Diameter 17mm are made up from SAE 8620 bright material. • The bearings used are of "6203zz" permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nuts and bolts are used for assembly. • The P.U. bushes (Stopper) used to avoid the collision. • The circlips used for assembly is of A 16 • The powder coating done with Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness.

SEATING & STANDING TWISTER • DIMENSIONS: - 1700mm (Length) x 540mm (Width) x 1250mm. (Height). • SAFE AREA: - 3 Mtr x 1Mtr. • Seating &Standing Twister equipment made from "C" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The Center Pipe is of 100mm NB made from "C" Class G.I. Round Pipe. • The M.S. round plate of 0250 mm & 10mm thickness is welded at bottom. • Handle and Bottom sleeve pipe of 125mm OD with thickness 5mm provided for easy assembly, replacement and maintenance. • The bottom frame of the Seating & Standing twister is of 32 NB, 50 NB, and 25 NB made from "C" class G.I. pipe. • The handle frame of Seating & Standing twister is 25 NB & Foot resting frame of seating side is made from "C" class G.I. pipe of 25mm NB. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB "C" class, Welded with M.S. round plate of 0250 mm& 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRCA square pipes of 3mm thickness. • The Twister plate fitted on the bottom frame is made up of M.S. Round Plate of size 300mm diameter and 10mm thickness. • Closing Caps are made up of high quality Fiber reinforced Plastic material. • The Pins used are made up of 0 35 mm SAE 8620 bright material. • The bearings used are of "6205zz" permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nuts & bolts are used for assembly. • The powder coating is done by Pure Polyester powder of Berger Paint with 60 to 70 micron thickness.

CHEST PRESS CUM SEATED PULLER • DIMENSIONS: - 2000mm (Length) x 710mm (Width) x 2200mm. (Height). • SAFE AREA: - 3.0 Mtr x 1.7Mtr. • Chest press cum seated puller equipment made up of "C" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The center pipe is of 100NB made up of "C" Class G.I. pipe. • The bottom welded with support of M.S. round plate of 0250 mm & 10mm thickness. • The connecting pipes are made up from 25NB "C" class G.I. pipe. • The handle frame is made up from 32NB "C" class G.I. pipe. • To build structure bushes are used which are made from seamless pipe of 50mm O.D. and 6mm thickness as well as 50mm diameter solid bar is used. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB "C" class welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. • Closing Caps are made up of high quality Fiber reinforced Plastic material. • Pins used of Diameter 25mm and 17mm are made up from SAE 8620 bright material. • The bearings used are of "6205zz" &"6203zz" permanent lubricated sealed bearing of reputed brand • High tensile steel with galvanized nuts & bolts are used for assembly. • The cerclips used for locking is made up of A24 & A16 • The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness.

Bidder Name

Amount

V R ENTERPRISES(GSTN-04AFMPG0692K1ZC)

Khalsa Exports Pvt. Ltd.(GSTN-09AABCK3696G1Z9)

UTKARSH ENTERPRISES(GSTN-09AFZPG6306H1Z1)

CHANAKYA ENTERPRISES(GSTN-08AAGFC1432N1ZF)

Neha CReations(GSTN-03AJNPK3110H1ZO)

k. rajan industries(GSTN-08AIKPN6920C1ZA)

Megha Fibres(GSTN-08ADGPD6224J1ZN)

KUMKUM UDYOG(GSTN-NA)

M/s Sagar Construction CO.(GSTN-NA)

Megha Fibres

UTKARSH ENTERPRISES

k. rajan industries

Neha CReations

CHANAKYA ENTERPRISES

Khalsa Exports Pvt. Ltd.

V R ENTERPRISES

M/s Sagar Construction CO.

KUMKUM UDYOG

Neha CReations

UTKARSH ENTERPRISES

M/s Sagar Construction CO.

Khalsa Exports Pvt. Ltd.

CHANAKYA ENTERPRISES

Megha Fibres

k. rajan industries