tender for the Partition Work at Thiruvananthapuram

Aluminium Partition Cabin Work CPSP J1,J2 CPSP 1 to 8 Central Partition Only Supply and Installation of Aluminium Partition: consisting of Aluminium Sections 63.5 MM X 38.1 MM X 1.0 MM thick hollow anodized of Jindal / Hind Alco make conforming to IS733 and IS 1285. The anodizing shall be transparent and complying IS 1868 (minimum anodic coating of grade AC 15). The Sections would be installed at an interval of 3’6” vertically and bottom section of Aluminium snap beading for glazing/paneling etc. and 5 mm thick float Transparent Glass including providing screw less aluminium glazing clip. Bottom up to 3’ Ht Will be provided with 8 MM thick both side pre-laminated particle board flat pressed 3 layer conforming to IS12823 Grade I type II of of interior grade complete with fixing clips, fasteners, filling up of gaps at junction, top, bottom, & sides with required PVC/Neoprene felt etc.. The joints shall be smooth, mitred and jointed with cleat angle etc….

Executive Office Table For Officer IOP 1 to 5 Supply and installation of free standing straight table of size 1500Lx 700W x 760H (or nearest size)Main Table The Table Top shall be made of 18 mm thick side leg 18mm pre - laminated particle board with PVC edge band lipping. CPU trolley and Keyboard tray. The rate shall be inclusive of cost and conveyance of all material, labour, transportation, loading - unloading charges and Movable type Table With Side Table size 1500Lx 700W x 760H

High Back Chair IOP 1 to 5 Executive high back Revolving chairs with Imported fiber handle, extra cushion Back Tilting Mechanism High Pressure Hydraulic gas lift 100 mm with Cover Powder Coated Metal (OR) Nylon/SS Base with imported Nylon Wheel 3 Year One Site Warranty

Office Chair For Staff Supplying Medium back chair. The seat and the backrest shall be made up of molded polyurethane foam of the right density and thickness, facilities like Pneumatic height adjustment, center tilt mechanism, tilt locking, base with twin castor wheels

Slotted Angle Rack New Office Storage Room Manufacture the heavy duty slotted angle racks, angle racks and slotted angle racks in a variety of cages 2mm and dimensions. They are made through advanced technical processes and are made using CR, mild and HR steel. 20 kg sheet With Support under Two Panel They are Good durable with Spry Painting Finish work Size:900mmx400mmx1900mm(H)

Truss structure Work Full Covered Supplying and erecting Platform for using 16 gauge GI pipe of the following size frame built on 65 mm Die 2.5 mm Thickness GI hollow Section Main Platform Section 76.2X38.2 X1.6nmm GI Rectangular Hollow Section Cross Purling 50X50X1.6 mm GI Hollow Section Structural Frame 101.6X101.6 Fully Applied Epoxy Coating Finishing and including welding, cutting to length, cost and conveyance of all materials and labour charges GI pipe (Truss) GI pipe (Purling). bolted in built up Sections Trusses and framed work with M.S angle iron plates, Roof Sheet Sandwich Model 0.35 mm Thickness Powder Coated Finish all Materials Branded Like JSW or Other Equitant Brand , cutting, fabricating and hoisting with bolts, plates, washers, bitumen washer etc….

Free Standing Straight Table for Staff Supply and installation of free standing straight table of size 1000Lx 600W x 750H (or nearest size)Main Table The Table Top shall be made of 18 mm thick side leg 18mm pre - laminated particle board with PVC edge band lipping. CPU tray and keyboard tray shall be provided. The rate shall be inclusive of cost and conveyance of all material labour , transportation ,loading -unloading charges etc. table 1000x600x750