REPAIR TO FLOORING, PLASTERING, TILING, PLUMBING, DRAIN, PATH CULVERT, FENCING AND OTHER CONNECTED WORKS IN SMQ, SHOPPING COMPLEX, MAP AND BILLETS AREAS AT AF-I UNDER GE (AF) JAMNAGAR NO.2

Amount

Supply and fix in repairs 10 Litre capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float, handle, flush pipe 32 mm, PVC connection 450 mm fixed in position and connecting complete all as specified and directed.

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, with plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connections complete all as specified and directed.

Supply and fix in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 440 mm white with integral foot rests with cast iron ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and as directed.

S&F in repair white vitreous china wash hand basin of size 550 x 400 mm, fixed over & including MS brackets comprising of the following items :- (a) Waste fitting 32 mm dia brass chromium plated with long screwed shanks and fly nut, flange end, bedded in red lead cement and other end fixed complete. (b) 15 mm size Pillar tap fancy type cast copper alloy with capstan head, chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nut screwed for iron pipe complete. (c) LDPE/PVC waste pipe 32 mm dia 1000 mm long complete.

S&F in repairs aluminium tubular towel rail, 20mm dia, D type, 60cm long between flanges omplete all as specified and directed.

S&F in repairs waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms) for 32 mm discharge pipe complete all as specified and directed.

S&F in repairs Waste coupling of PTMT (half or full threaded) (Minimum weight 40mm-60 gms) for 40 mm discharge pipe complete all as specified and directed.

Dismantling water tanks of capacity exc 250 and n.exc 500 ltrs complete all as specified and directed.

Dismantling water tanks of capacity exc 500 and n.exc 1000 ltrs complete all as specified and directed.

Supply and fix 500 litres capacity, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with 25mm dia GI tank nipple of for inlet, outlet, washout and overflow etc complete all as specified and directed.

Supply and fix 1000 litres capacity, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with 25mm dia GI tank nipple of for inlet, outlet, washout and overflow etc complete all as specified and directed.

Supply & fix in repair Nipple suitable for HDPE water tank (Minimum weight of 25mm-65gms) inlet / outlet suitable for 25 mm bore pipe complete all as specified and directed.

S&F in repairs 15mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm bore wall mixer 3 in 1 system with provision for overhead shower system complete all as specified and directed.

S&F in repair 15 mm size bib cock short body cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed.

S&F in repair 15 mm size bib cock long body cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed.

S & F in repairs 15 mm size CP pillar cock long nose cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 20 mm size stop cock, cast copper alloy, chromium plated with long shank, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed.

S&F in repair 15 mm size stop cock, cast copper alloy, chromium plated with long shank, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed.

S&F in repair 15 mm size angle cock, cast copper alloy, chromium plated with long shank, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed.

S& F in repairs brass chromium plated overhead shower 125 mm size with 225 mm arm and flange for 15 mm inlet pipe complete all as specified and directed.

M&L for repairs to bib taps / pillar taps / stop cock / angle valves / concealed stop cock / wall mixer / basin mixer of any description for stopping leakage of water by replacement of washer of any description complete all as specified and directed.

M&L for repairs to bib taps / pillar taps / stop cock / angle valves / concealed stop cock / wall mixer / basin mixer of any description for stopping leakage of water by replacement of brass spindle heavy quality, complete all as specified and directed.

Removal of air lock, blockage in water pipes / bib taps / stop valve / pillar tap / angle cock all as required and as directed to ensure proper flow of water complete all as specified and directed.

S&F in repairs stainless steel sink, 1.00 mm thick for kitchen, with plug, washers, waste pipe including bedding in cement mortar 1:4 on dwarf wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 495 mm x 420 mm, with bowl size 405 mm x 355 mm x 178 mm, including waste assembly, PVC flexible waste pipe complete all as specified and directed.

S&F in repair stainless steel sink with draining board for kitchen or laboratory, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete including waste coupling, waste pipe complete all as specified and directed.

S&F in repairs 25mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repairs 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair 450 mm long PVC connections 15 mm size with PTMT nuts complete all as specified and directed.

S&F in repair 600 mm long PVC connections 15 mm size with PTMT nuts complete all as specified and directed.

S&F in repairs water tank covers for 500/1000 ltrs capacity tank complete all as specified and directed.

Taking down steel water tubing and connection 15mm bore including cleaning for refixing complete all as specified and directed.

Taking down steel water tubing and connection 20mm bore including cleaning for refixing complete all as specified and directed.

Taking down steel water tubing and connection 25mm bore including cleaning for refixing complete all as specified and directed.

Refixing 15mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Refixing 20mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Refixing 25mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Supply and laying 16 mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings, fixed on wall / ceiling concealed or exposed or laying in floors complete all as specified and directed. Note:- Cutting cheases wherever required will be measured & paid separately.

Supply and laying 20 mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings, fixed on wall / ceiling concealed or exposed or laying in floors complete all as specified and directed. Note:- Cutting cheases wherever required will be measured & paid separately.

Supply and laying of GI tube 25 mm bore, medium grade, galvanised, with all fitting laid in trenches fittings on walls concealed type in any type of masnory or laying in floors complete all as specified and directed. Note:- Cutting cheases wherever required will be measured & paid separately.

M&L for cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in cement mortar 1:3 complete all as specified and directed.

M & L for 15mm tubes, 'medium grade' galvanised, with all fitting and fixed to walls and ceilings or laid in floors complete all as specified and directed.

M & L for 20mm tubes, 'medium grade' galvanised, with all fitting and fixed to walls and ceilings or laid in floors complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed.

S&F in repair PVC floor trap 75 mm dia of outlet, with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and directed.

S&F in repair SS grating of size 150 mm x 150 mm fixed with white or grey cement complete all as specified and directed.

S&F in repair 32 mm dia low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2, fixed as in spout pipe and making good disturbed surface in CM 1:3 complete all as specified and directed.

M&L for cutting holes into or through stone / PCC block wall built in cement mortar and making good in cm 1:3 or PCC 1:2:4 (type B-1) on required Superficial area n exc 150 sq.cm complete all as specified and directed.

Demolition of concrete surfaces in ground floor and paving n.exc. 15cm thickness (below or above ground level) and removing the same to a distance of 1.5 KM including loading and dumping/ levelling at the destination all as specified.

M&L for 100 mm thick cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in floor / hard standing etc complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth potection including finished the surface even and smooth without using of extra cement and complete all as directed.

Demolition of concrete of any description and in sunken portion not otherwise specifically provided for complete all as specified and directed.

M & L for cement concrete type E2 1:5:10 (using 40mm graded stone aggregate) in sunken portion complete all as specified and directed.

M& L for preparation sunken surfaces by cleaning of and removal of loose concrete and filling cracks with polymer modified mortar using Dr fixit Pidicrete URP or equilvalent in forsoc and other approved make and applying 2 coat of Dr fixit Bath seal WPC in sunken area and laying a protective plaster in 10mm thickness in cement mortar (1:3) admixtured with Dr fixit Pidicrete LW+ @ 220 ml per bag of cement applying mix of cement water in ratio 1:1.5 by volume using Dr fixit Pidicrete URP chemical on floor and vertical surface of sunken floor as per manufacturers instructions complete all as specified and directed. Note: Liquid water proofing compound to be measured and paid seperately.

Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debris to outside MOD land complete all as specified and directed.

M & L for 25 mm thick cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in levelling course complete all as specified and directed.

M&L for non-skid joint free coloured Ceramic tiles (1st quality) not less than 7 mm thick of size exc 0.06 sqm but n exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed.

M&L for non-skid joint free coloured ceramic tiles (1st quality) not less than 7mm thick tiles of size exc 0.11 sqm but n exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surface 300 x 450 x 7-8mm / 450 x 350 x 7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat of mortar in CM 1:4 for laying wall tiles finishes complete all as specified and directed.

Dismantling of kota stone slabs and granite tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or plateform etc complete all as specified and directed.

M&L for granite work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade complete all as specified and directed.

M & L for machine cut & machine polished kota stone slab 20 to 25 mm thick as in kitchen platform, treads of steps laid over and including 15 mm thick screed bed in CM 1:6, jointed with grey cement slurry mixed with colour pigment to match the shade of the slab, rubbing and polishing complete all as specified and directed.

18-20 mm thick machine cut kota stone slab in riser of steps, skirting,dado and pillar laid over 10mm thick cement mortar backing in 1:4 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for rounding to edges of granite / kota stone slabs edge, such as in steps cooking platform, and other similar situation.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debris to a distance exc 1.5 Km but n. exc 2 Km. complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:6 on brick or stone walls to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on stone / PCC block masonry wall surface, including mixing liquid water proofing compound in second layer only as per manufacturers instructions, finished the surface even & smooth without using extra cement complete all as specified and directed. Note:- WPC will be measured & paid separately.

M&L for 5 mm thick rendering in cement mortar 1:3 on on ceiling, finished the surface even & smooth without using extra cement complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls & applying two coats of distemper oil emulsion over a coat of chalk whitening compatible primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

S&F in repair health faucet (Hand shower) with 8mm dia 1 metre long easy flex tube in chorme finish with wall hook complete all as specified and directed.

S&F in repair SS Soap dish fixed with stainless screw complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack of size 31" x 24" x 10" deep, fabricated with 0.63 mm sheet fixed in position on wall complete all as specified and directed.

S&F in repair waste pipe of PVC 31/32 mm x 800mm long, complete all as specified and directed.

S&F in repairs corner glass self 12 inch including bracket etc. complete all as specified and directed.

Dismantling of paver block including demolition of cement mortar bedding or backing coat, including removal of debris to outside MOD land complete all as specified and directed.

M&L for 100mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

25mm sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed.

M & L for machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade complete all as specified and directed.

Relaying machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed.

S & F 16 to 18 mm dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.5 sqm area fixed with and including one number SS clamps (grade 202) of flat-30mm x 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment complete all as specified and directed.

M & L for granite (of any type) work 20mm (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, glossy finishing set, jointed and pointed in neat cement slurry with mixture of white and grey cement in equal pro-portions and no pigment in floors complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar 1:3 on on ceiling, ifinished the surface even & smooth without using extra cement complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridge, fixed with self tapping screws complete all as specified and directed.

M & L for providing, cement concrete in coping / roof kerbs or mud stops, rounded or chamfered on edges type B0 1:2:4 (using 12.5mm graded stone aggreagte) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M & L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M & L for steel work in tubular trusses including special shaped washer etc using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

M & L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc forming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for preparation of new surfaces of steel exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Excavating soft/loose soil in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm thick, complete all as specified and directed.

M & L for cement concrete (1:3:6) type C2 (using 40 mm graded stone aggregate) in foundation complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

S & F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F 5 to 10mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

S & F mild steel bars 10mm dia and over (Fe-410 Gde-E-250), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Dismantling fencing wire mesh, any type

Supply only chain link MS galvanisd fencing, size 50mm x 50mm or any type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Fixing only concertina coil of size 450mm dia on angle iron above boundary wall and other places complete all as specified and directed.

Supply only concertina coil of size 450mm dia on angle iron above boundary wall and other places complete all as specified and directed.

Supply only barbed wire, galvanised, 2 strand, 2.24mm dia barbed wire with 2.00mm dia barbs at 75mm spacing complete all as specified and directed.

Fixing only galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. Note: Each line wire to be measured.

Excavating in trenches in soft/loose soil n.exc 1.5m wide and n.exc 1.5m in depth for foundation, laying pipes, cables etc n.exc 10Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L for cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in surface channel and drains, complete all as specified and directed.

M & L for providing, cement concrete in coping or mud stops, rounded or chamfered on edges type B0 1:2:4 (using 12.5mm graded stone aggreagte) complete all as specified and directed.

Returning, filling including spreading, watering and well ramming in layers n.exc 25 cm in soft/loose and hard/dense soil complete all as specified and directed.

Removing excavated material exc 1.5 km but n.exc 5.0 km and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Demolition of brick work / stone work / PCC block masonry built in cement mortar complete all as specified and directed.

M & L for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 type C1 1:3:6 (using 20mm graded stone aggreagate), complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on other than fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cement complete all as specified and directed.

Dismantling expanded metal, any thickness or mesh, fixed with steel, n exc 4 kg per sqm complete all as specified and directed.

M&L for running welding in repairs thickness of metal to be welded exc 6mm and nexc 9mm complete all as specified and directed.

S & F n exc 4 kg welded steel wire fabric complete to wood or steel members all as specified and directed.

Fixing only welded wire mesh n exc 4kg wire fabric to wood or steel members complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and providing one coat of cement base paint complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and providing two coats of cement base paint complete all as specified and directed.

M&L for preparation of old surface of wall and applying two coats of acrylic emulsion paint with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour, as per manufacturer's specification complete all as specified and directed.

M&L for preparation of old surfaces of steel exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Removing debris to a distance of 5km including including loading, unloading and stacking / levelling at the destination and thrown out of MOD land complete all as specified and directed.

Note : (i) For item to be replaced under repair (day to day complaint) contactors trade man should report to complaint cell daily and take complaint from concren JE and after attending complaint he should give feedback and return the complaint slip to concern JE in the evening at 17.30 Hrs on same day. (ii) B/R complaint to be attend within 24 Hrs from the receiving of complaint, other wise panalty of Rs.500 per complaint per day will be imposed on contractor. In this regard decision of EIC and GE will full, final and binding to contractor. (iii) Being a maintenance contract site will be handover to contractor as per complaint received from user and as per site requirement. (iv) Rates for above shall be inclusive of rates quoted by contractor against BoQ/Sch 'A'. No extra payment in this regards be made to the contractor.

Indice Technologies (BID ID -3129485)

S t modi (BID ID -3128790)

Nirmal Construction (BID ID -3129924)

suvidhiconstruction (BID ID -3128921)

Pooja Enterprise (BID ID -3129950)

Sagathiya Builders (BID ID -3129936)

Krishna Bhoomi Enterprise (BID ID -3129709)

jagdish machinery stores (BID ID -3129808)