NIT No- 679/PWD/ROAD/BMC , Dated- 06/11/2025

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (a) 15 mm thick plaster

M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Priming one coat on steel or other metal surface with synthetic oilm bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. Including using of approved putty etc. on the surface, if necessary : On timber or plastered surface : With super gloss (hi-gloss) - Two coats (with any shade except white)

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. Including using of approved putty etc. on the surface, if necessary : On steel or other metal surface : With super gloss (hi-gloss): Two coats (with any shade except white)

Bench: Length -5', Handle- with designing C.I casting, Seat: M.S Hollow pipe with x 25mm and 50 mm x 25mm section, No of strip- 10 nos, Color multicolor APAS finish paint on 2 coats of primer. Area: 6' x 2.5

Double See-Saw: length- 10", Height -2', Width- 1.5' the machine assy. / joint portion should has heavy duty ball bearing. Structural parts made of GI pipes and MS hollow section (including cutting, fitting. Welding, bolting and smoothing grinding etc. complete). Entire product is assembled with nut bolts. Outer diameter of metal parts: 26.9, thickness of metal parts: min 2.9mm, seat MOC: FRP, FRP thickness: 6mm to 8mm, FRP density: 1600kg/m^3. Color: multicolor ASPA finish paint on 2 coats of primer. Area: 10' x 3 OR 2

Circular Swing: Height-5'. Width-5' The machine assy. / joint portion should has heavy duty ball bearing. Structural bolting parts made of GI pipes and MS hollow section (including cutting, fitting. Welding, bolts and smoothing grinding etc. complete). Entire product is assembled with 2.9 nut bolts. Outer diameter of metal parts: 42.1, 48.3, 26.9 thickness of metal parts: min seat MOC: FRP, FRP thickness: 6mm to 8mm, FRP density: 1600kg/m^3. Color: mulicolor APAS finish paint on 2 coats of primer. Area: 6' x 6

Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material. [Border concrete if necessary to be paid separately]. Note: Sub-grade CBR should not be less than 5. 60 mm thick interlocking designer concrete paver block M35 grade for light traffic zone,commercial & office complex,tourist resort as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular /granular sub-base course including cost of sand for sand bed but excluding cost of base ,sub-base course & subgrade preparation.) Coloured Decorative