EXTENSION OF CONTROL ROOM BUILDING OF AYYERMALAI 110/11/33KV SS ,KARUR

Name of the works

Dismantling the existing RCC work and removing them away as directed by the department engineer in charges including cost of labour ,lead, lift ,scaffloding charges etc complete.

Dismantling the existing terracing of pressed roof tiles work and removing them away as directed by the depatment engineer in charges including cost of labour , lead, lift, scaffloding charges etc complete.

Earth work excavation for foundation including all labour charges including initial lead, lift, etc. complete.

Supplying and filling with river sand for foundation including cost of sand, all labour, lead,lift, consolidation etc. complete.

PCC 1:4:8, using 40mm HBG metal foundation without formwork including cost of cement, all materials, labour, lead, lift, etc. complete.

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone without formwork including cost of all materials, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement(Raft )

RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for column with formwork including cost of all materials, labour lead, litf, etc., complete but excluding cost fo steel reinforcement (by using mixer machine).

R.R Masonary in cement mortar1:5(one cement,and five crushed stone sand) for foundation and basement including simultaneously pointing above ground level with the same mortar etc.,complete

RCC 1:1.5:3 using 12 to 20mm HBG metal for Grade/Plinth beam with formwork including cost of all materials, labour lead, litf, etc., complete but excluding cost fo steel reinforcement (by using mixer machine).

Providing Anti-termite treatment to soil adjecent and under building foundation, plinth periphery of the building by application of chemicals of IS 63613 part I to IV in stages to suit the progress of work consist as per the detailed specification as below. Including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing etc., complete and as directed by the departmental officers.

Brick work in following Cement Mortar using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Continuous lintel concrete.

RCC 1:1 1/2:3 mix using 12 to 20mm HBG metal (machine crushed) for Sun shade and loft with form work including cost of all materials, labour, leas, lift, etc., complete.

RCC 1: 1.5:3 using 12-20mm HBS metal (machine crushed) metal for Roof beam with centering, shuttering including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement

RCC1:1 1/2:3 using 12mm to 20 mm HBG metal (machine crushed) for 150mm thick roof slab concrete with formwork including cost of all materials, labour, lead, lift, centering shuttering , curing, etc., complete but excluding cost of steel reinforcement.

Providing steel reinforcement for RCC works including cost of steel rod binding wire and placing in postion of the steel reinforcement all materials, lead and lift etc., complete.

Supplying and fixing ornamental grills using M.S. flats of size not less than 12 mm x 3mm including painting two coats of enamel painting two coats over one coat of primer etc., complete.

Refilling with excavated earth other than sand in foundation and sides of masonry, consolidation as per std.specn.with water including all, labour, lead , lift, etc., complete.

Removing the excess earth to the nearby bund or low laying area instructed by field engineer including all lead, lift, etc., complete.

Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Plastering with CM.1:5 mix using 12mm thick for inside & outside walls, including cost of all materials, water charges, labour, lead, litf, etc, complete.

Plastering with CM. 1:3 mix 12mm thick for ceiling,fol, bath, RCC pillars, sunshade, loft, etc., including cost of materials, labour, water charges, lead, lift, watering, curing, etc., complete.

White washing two coats with white cement including cost of all materials,labour lead,lift etc complete

Painting the wall two coats with approved weather proof Interior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification.

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface etc., complete complying with standard specification.

Paving the floor with best quality Virtified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the Top of roof with Solar refelective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Supplying, fabricating and fixing in position of Aluminium anodised natural colour matt finish of double leaves door with half panelled with 12mm thick bothside prelaminated partile board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section-Vertical &Top rail: 50x44.45x2.50mm @ 1.292 kg/m and Bottom rail : 100 x 44.45 x 2.50mm @ 1.974 kg /m , Lock rail : 50x44.45x2.5mm @ 1.292 kg/m,Alu. Clips: 17.15x17.27x1.50mm @ 0.176 kg/m Alu. Handle: 100x30mm @ 0.988 kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - 2 Nos., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 2Nos ., lock-1No., Door stopper with rubber bush including cost of materials, labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beam masonry with power drill wherever necessary and redoing the damaged portion to the original condition afterfixing etc. complete. All the Alu. sections are to be anodised with matt finish under electically contolled condition in accordance with IS 1868/1962 for an average anodic film thickness of 15 microns etc., complete.Aluminium sections,and furniture fittings shall be got approved by the Executive Engineer incharge.

Fabricating Supplying and fixing in position of Aluminium anodized natural colour matt finish Openable type glass window (3 leaves) with fixed glazing at top to a height of 0.3m with alminium grill for glazed portion in all floors having the Aluminium section such as outer frame of section (418/code) of 37.70x33mmx2mm @ 0.50kg/m, center mullions of (code 9153,2.50mm thick) 59x33x2.5mm @ 0.936kg/m,Z section of having 24.00mm vertical and width of 33mm @2.50mm thick.Confirming to code No [email protected]/m Aluminium clips of 3.60 length having total weight of 0.40kg or 0.109kg/m with neccessary accssories such as rubber beadings, special hinges, handle including supplying and fixing 4mm thick plain glass including cost of all materials, labours, power consumption required for fabrication, drilling holes in RCC column slab, masonry walls wherever necessary with power drills to the required extent and make good to the original conditons after fixing and also as directed. All the Aluminium sections are to the anodised with matt finish under electrically controlled conditons in accordance with Is 1868/1962 for an average anodic film thickness of 15 microns etc. Complete.

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

Supplying and fixing in position PVC cowls of following dia of best approved quality conforming to BIS, etc., complete complying with standard specifications. (The PVC cowl should be got approved by the Executive Engineer before use on works).

Wiring with 2x1.5 sqmm(22/0.3) PVC insulated unsheathed SC Cu.Conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with TW switch box and 5A F.T.switch in flush with wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point & Fan point.

Supply and run of 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in25mm dia GI pipe bent at both ends with necessary angle iron upright and end supports for mains.

Wiring with 2x1.5 sqmm(22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mmx100mmx113mm TW switch box with 3mm thick Hylem sheet cover for 5A 3pin non interlocking Wall socket with 5A Flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point

Wiring with 2x4sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, inflush with wall, with 150mmx100mmx113mm TW switch box with 3mm thick hylem sheet for 15A 3 pin non interlocking Wall socket with 15A Flush type switch with continuous earth wire connection of 14 SWG TC wire,and making good of the concealed portion,with suitable colour for concealed power plug point

Supply and fixing of 32 A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only

Supplying and fixing box type 4'-40w single flouresent fitting complete with copper choke and condenser 1 no 4'-40w tube with t.w. round block on wall or ceiling with pvc unsheated leads from terminals to the fittings with tube .

Supply and fixing of Bulk head fitiing (Philips / Bajaj / K.Lite / Crompton Greaves).

Supply and fixing of 1200 mm sweep(56") AC ceiling fan complete with stepped electronic 300 W regulator with 1metre down rod on the existing clamp

Supplying and fixing of 2000litres capacity Sintex tank of approved quality including cost of labour for fixing etc.,complete.

Tender floated for the whole event.

Please Enable Macros to View BoQ information