INVITATION OF RATES FOR M.S. FABRICATION WORKS

Amount

Press Steel Door/Window frame made with 1.25 mm CRC sheet including Hinges 3 No. ISI marked (100x14G) fixed with screw, Jams base tie or 20x40mm, MS flat with MS flat Iron hold fast 20x40mm, 150mm long including 1 coat of approved zinc chromate anti corrosive paint including fixing of ISI Marked MS Hinges 14 Gauge 100mm.

85x50 without rebate

80x50 without rebate

100x50 with one rebate

100x50 without rebate

120x50 Double rebate

Extra for Supply of ISI Hinges 100mmx14G including fixing in frame

-do- but welding with chaukhat

Supply of Fabricated MS glazed Door\Windows /Ventilator of standard steel roller ISI Z-section of required size with MS flat Iron hold fast 20x4 mm 150m long including one coast of approved Red oxide primer & fitting arrangement complete (Cost of fittings will be paid separately)

Supply of Fabricated MS CRC sheet (Bokaro ESSAR, TATA or equivalent) door shutter upto 18 gauge including locking arrangement, handles etc. as per approved design including one coat of Red Oxide Primer.

Supply of Fabricated Angle Iron Nosing made with 35x35x5 mm with Red Oxide approved primer

Supply of Fabricated MS Grill/railing of made of flat/iron / sq. Bar of approved pattern and design in required size including fixing with MS frame with one coat of Red Oxide Primer.

Supply of Fabricated M.S. Chahali made with flat iron and angle iron of required size and design.

Supply of Fabricated MS angle Iron/Chaukhat made with 35x35x5, 40x40x6 mm of required size including MS Tie Rod of 12 mm Bar, ISI MS Hinges (100x14G) 3 No. fixed with screw arrangement ISI marked 100 x14 G fixed with frame with hold fast of flat Iron 20x4 mm 150 long including one coat of Red Oxide.

Fabrication of Tower Bolt 150mm ISI make.

Fabrication of I-Hook 200x5mm

Supply of rolling shutters of approved make made of 80x125 mm (3”x18G) cold rolled MS lath inter locked through their entire length jointed together at the end by locks and mounted on specially designed pipe shafts with brackets side guides , arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top cover and spring.

Supply of 27.5 cm. long wire spring grade 2 for rolling shutters.

Supply of top cover for rolling shutters made 18 gauge MS sheet.

Supply of ball bearing for rolling shutters.

Supply of 8 mm MS round bar rolling shutter grill of required size with rolling shutter as approved design & PWD Specification

Supply of collapsible steel shutters with vertical channel 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rails of T-Iron 40x40x6 mm with 38 mm dia steel pulleys with bolts, nuts locking arrangement stoppers handles complete including one coast of primer of approved quality.

Supply of CI/MS decorated ornamental main campus gate made with M.S. hollow pipe, M.S. sheet, M.S. Iron, Twisted bar caste Iron, C.I. designer pieces as per approved design including cost of Red Oxide primer of approved quality.

Supply of MS Chahali made with 16 gauge conduit pipe upto 8’ long 1 ½ feet wide frame with 25x4 MS flat both end closed with angle iron and flat rebated as per approved design and drawing of one coat red oxide paints complete.

Supply of Fabricated cow catcher made with 65 to 100 mm G.I. Pipe B-Class ISI Jindal/surya with MS Girder Channel as per approved design , drawing for all sizes

Supply of Fabricated rectangle/square Hollow pipe /MS pipe /Railing /Gate/Post of different sizes including one coat of red –oxide.

–Do- but ornamental in Round, Corner

Supply of Mechanical hinges 40 mm round bar with ball and socket joint 40x50 mm.

–Do-but 40x100 mm.

Supply of M.S Measuring Box 1’x1’x1’x 25mm MS pipe handles.

Supply of Fabricated tubular trusses shade made with M.S. pipe of required dia as per structure design & drawing including foundation bolt, base plate, wind tie as required, including red oxide paint complete.

-Do- but make with Angle Iron

Labour charges for erection of above trusses shade including supply of all labour and T&P and required scaffolding, welding, fixing at site complete without civil work.

Supply of Fabricated 3’ X 5’ M.S. chhanna made of 35 X 35 X 5 angle iron frame and stand, G.I. Screen of suitable size backing with 1’ X 1’ welded mesh and one coat red oxide primer.

Supply of power loom 14x24 pure G.I. mosquito wire mesh frame 20x4mm M.S. flat rebated as required size and design including welding, supply & all labour material, T & P etc. required for proper completion of work.

Supply, Fabrication and erection of Partition Jali frame of 35x35x5 Angle Iron Frame with 1"x3"x8 Gauge welded mesh jali 25x5 flat Iron beading cross beading 32x5 including Priming coat, all Material, Labour etc. complete.

Providing and fixing M.S Tubular frames for doors, windows, ventilators and cupboard with rectangular/L- type sections, made of 1.60 mm thick M.S. sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary but hinges and screws and applying a priming coat of approved steel Primer:

Fixing with 15x3mm lugs 10cm long embedded in cement concrete block 15x10x10cm of C.C. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Fixing with carbon steel galvanized dash fasteners of required dia and size (to be paid for separately)

Providing and fixing precoated galvanised iron profile sheets (Size, shape and pitch of corrugation as approved by Engineer –in-charge) 0.50mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7, micron epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Welding by gas or electric plant including transportation of plant at site etc. complete.

Supply of 40mm M.S. round /Z hinges

Supply of 50mm M.S. round /Z hinges

Ratan Industries

M/S OM TRADERS

Sri Bala Ji Enterprises