8753 REPAIRS TO JOINERY, PLASTERING, PLUMBING AND OTHER MISCELLANEOUS CIVIL WORKS IN TECHNICAL AREA AT AF STATION BAREILLY

Amount

Taking down cement plaster of any description on brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc. to receive plaster

M&L for rendering 15mm thick in CM (1:4) on brick or concrete surfaces up to a height of 8.0m finishing even and smooth without using extra cement complete including mixing water proofing compound complete including necessary steel scaffolding all as specified. [Note: Supply only water proofing compound shall be measured and paid separately]

Supply only liquid water proofing compound.

M&L for rendering 15mm thick in CM (1:6) in patches n.exc. 3sq.m. each patch on concrete/ brick masonry surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:3 on surfaces of ceiling finished even and smooth without using extra cement all as specified and as directed.

M&L for preparation of new plastered surfaces of walls & applying two coats of distemper oil emulsion over a coat of alkali resistant primer all as specified and as directed.

M&L for preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified.

M&L for preparation of old decorated surfaces of ceilings by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of new or untreated plastered surfaces and applying a priming coat of exterior primer and applying two coats of weather proof exterior emulsion paint of five different shades in camouflage pattern (Specific pattern as directed by Engineer-in-Charge) by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and cornices by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of oil bound distemper complete all as specified and as directed.

M&L for preparation of old decorated surfaces of walls and cornices by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white wash complete all as specified and as directed.

Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for all as specified and as directed.

M & L for providing plain cement concrete type B-1, 1:2:4, (using 20 mm graded stone aggregate), as in copings, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles all as directed.

M&L for brick work with fly ash bricks straight or curved on plan exc. 6m mean radius using old size bricks built in cement mortar (1:6) all as specified.

S&F in repairs PVC (SWR) pipe 110mm bore, single socketed in any length with rubber ring joints laid in trenches/ floors complete all as directed.

S&F in repairs PVC (SWR) bends 110mm bore, any radius complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 sq.m but not exc. 4.0 sq.m each all as directed

Taking down chowkats or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 sq.m each all as directed

Taking down shutters of any description exc. 2.0 sq.m each all as directed.

Taking down shutters of any description exc. 1.0 sq.m but not exc. 2.0 sq.m each all as directed.

S&F solid PVC door frame of size 50mm x 47mm made out 5mm thick wood grain printed PVC sheet, reinforced with M.S square tube, supplying & fixing in opening as per specification & drawing shown on Sl. Page No. 180 of SSR Part-II-2020 complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded wood grain printed PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of wood grain printed PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with decorative PVC beading of 10x10mm (90°), and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing shown on Sl. Page No. 177 of SSR Part-II-2020 complete all as directed.

M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L for 35mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides all as specified

M&L for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc. size of members as specified in SSR Pt-I, section 8 clause 8.24 (a) complete all as directed.

S&F 300mm long Mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

S&F 250mm long Mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

S&F MS Butt hinges 100mm long medium weight cold rolled and fixed

S&F aluminium anodized barrel tower bolt of size 150 mm long of extruded section

S&F extruded aluminium alloy handles fabricated type of size 125mm.

S&F 300mm long mild steel ordinary rat tail rod pattern spring including roller and roller plate complete fixed in repairs all as specified and directed by Engineer-in-Charge

M&L for preparation of new wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for preparation of old painted steel surfaces of any description exceeding 10cm in width or girth and applying one coat of synthetic enamel paint all as specified.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified.

M&L for treating small article such as hold fast etc area n.exc 0.1 sq.m each with tar or coal tar black paint complete all as specified and as directed.

M&L for mild steel work in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, 100mm MS tower bolts complete with glazing bars, dovetailed or welded complete all as specified and as directed.

All as per Item No. 38 herein before but without glazing bars

S&F Steel ventilator with top hung shutter including projecting type hinges, steel peg stay, with glazing bars, dovetailed or welded complete all as specified.

M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and as directed.

S&F extruded aluminium alloy handles fabricated type of size 150mm.

S&F Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring fixed in floor over all length of cover plate 150mm complete fixed in repairs all as specified and directed by Engineer-in-Charge

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

S&F Butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized and fixed, type B-21 of size 100mm

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty/ wooden beads in squares not exc. 0.5 sq.m each pane.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty/ wooden beads in squares exc. 0.5 sq.m each pane.

S&F 4mm thick figured glass, ordinary quality and glazing with oil putty in squares not exc. 0.5 sq.m each pane.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ aluminium frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads/ staples.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

M&L for 25mm thick cement concrete PCC 1:2:4 type B0 using 12.5mm graded aggregate as in sub base for flooring all as specified

M&L for glazed digitally printed ceramic tiles of size 300x450mm, 6 to 7mm thick in vertical surfaces of wall, set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 10mm thick backing coat in CM 1:4 complete all as specified.

M&L for non - skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.11sq.m but n.exc. 0.18sq.m, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in CM (1:6) complete all as specified.

M&L for double charged, vitrified tiles, coloured, first quality of size 600x600mm, 9 to 10mm thick as in Floors/ skirting, set and jointed in cement slurry, finished with flush pointing in coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and as directed. [Note: The colour / shade / design of tiles shall be as approved by GE.]

M&L for preparation of new steel surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar all as specified.

M&L for 18-20mm thick Udaipur green stone work (table rubbed and polished) in floors, steps, jambs, pillars, window cills, cooking platforms and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of stone, laid over and including 20mm thick screed bed in CM 1:4 complete including rounding and polishing the edges all as specified and as directed.

M&L for machine cut Kota stone slab 20-25mm thick in flooring/ treads of stair case etc. over and including 20mm thick cement screed base in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado etc. over and including 10mm thick cement screed base in CM 1:3, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 410-W (Gde-E- 250), Quality-A all as specified.

M&L for Welding in repairs n. exc 2.5cm in length and thickness of metal to be welded n.exc. 6mm all as specified

M&L for Welding in repairs exc. 2.5cm but n. exc 5cm in length and thickness of metal to be welded n.exc. 6mm all as specified

S&F of aluminium anodized powder coated of approved colour, sliding type three track (02 glazed shutters and 01 gauzed shutter) window with sliding shutter and frame with and including aluminium grill, 5 mm thick tinted glass and mosquito proofing net as detailed below complete all as specified and directed: - (i) Frame section of size 91.85 X 31.75 X 1.30 mm for top and sides rails and 91.85 X 31.75 X 1.20 mm for bottom rail. (ii) Top, bottom and side rails of shutter of section size 40 X 18 X 1.50 mm. (iii) Glass 5.00 mm thick one side reflective glass and other side visible fixed with rubber gasket and appropriate size aluminium clips and necessary handles, tower bolt etc. as directed. (iv) Stainless steel wire cloth (v) Filling of gap between wall and aluminium frame with silicon putty to make it proper water tight. (vi) Locking arrangement and providing Namda rope to make the frames air tight.

M&L for powder coated aluminium window shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as recessed handles, locking arrangement etc. complete all as specified and directed by Engineer-In-charge.

M&L for powder coated aluminium door shutters, with aluminium sections of minimum 3mm thick and weight not less than 2.05kg/m for side rails, 2.646kg/m for top & bottom rails and 3.116kg/m for lock rail, including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminium snap beading screw etc. complete all as specified and directed by Engineer-in-charge (minimum thickness of powder coating 50 micron). Note: Panel/ glass inserts shall be measured and paid separately

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. complete (minimum thickness of powder coating 50 micron) all as specified.

S&F powder coated aluminium (minimum thickness of powder coating 50 microns) grill of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.

S&F 5.5mm thick sheet glass, ordinary quality in any size with glazing clips/ beads all as specified and as directed.

S&F 12mm thick pre-laminated particle board, interior grade, pre-laminated on both sides with decorative choice lamination complete all as specified.

S&F Mortise lock, brass vertical type, size 100mm, 4 levers all as specified.

Deduct: Amount of Schedule of Credit b/f from Sl. Page No. 16 of tender document i.e. Rs. 12340.00

ZAIGHAM ENTERPRISES

S.K.Enterprises

M/s M Aali construction co

U P ENTERPRISES

Jain construction co

AJAY BUILDCON ENGINEERS AND CONTRACTORS