CONSTR OF LAB (7 X 10.6 METER) UNDER PM SHRI SCHEME AT KENDRIYA VIDYALAYA AHMEDABAD

Amount

Notes : (i) The work consists of 01 job (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department.

Surface Excavation n.exc (not Exceeding) 30 Cm deep and averaging 15cm Deep And Getting Out In Soft/loose Soil complete all as specified and directed

Excavating in trenches, n.exc 1.5m wide & and & n.exc 1.5m in depth; for foundation, etc or for shafts, wells, esspits, manholes, pier holes, etc. nexc 10 sq m on plan & n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed

Excavating in trenches, n.exc 1.5m wide & and exc 1.5m but n.exc 3.0m in depth; for foundation, etc or for shafts, wells, esspits, manholes, pier holes, etc. nexc 10 sq m on plan & getting out in soft/loose soil complete all as specified and directed

Excavating over areas, n.exc 1.5 m deep and getting out in n soft/loose soil complete all as specified and directed

Excavating over areas, exc 1.5 m but n.exc 3.0m deep and getting out in n soft/loose soil complete all as specified and directed

Treating The Backfill In Contact With Foundation At The Rate Of 7.5 Litres Of Emulsion Per Square Metre Of Vertical Surface (area Of The Sub Structure In Contact With Backfill To Be Measured) complete all as specified and directed

Treating The Top Surface Of Filled Earth At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface complete all as specified and directed

Treating The Soil Along With External Perimeter Of Building At The Rate Of 2.25 Litre Of Emulsion Per Metre Of The Perimeter Wall complete all as specified and directed

Treating The Soil Under Plinth Protection At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface Area complete all as specified and directed

M & L Pcc (1:4:8) Type D2(40 Mm Graded Aggregate) For Footing complete all as specified and directed

Returning, Filling In, Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm In Soft To Loose Soil complete all as specified and directed

Removing Excavated Soil Not Exc. 50m And Depositing Where Directed At A Level N Exc. 1.5 M Above The Starting Point complete all as specified and directed

M & L Rcc- M-25 (design Mix) Using 20mm Graded Aggregatefor Foundation ,plinth beam,including Rafts As Mass Concrete complete all as specified and directed

Form Work For Rough Finished Surfaces Of Concrete Measured Flat For Foundation,plinth beam complete all as specified and directed

S&F high strength deformed TMT steel bars 10mm dia & over, cut to length bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed

All as per item no. 1.15 But 5 To 10mm Dia In Stirrups, Spacers & Binders complete all as specified and directed

M & L Rcc- M-25 (design Mix) Using 20mm Graded Aggregate For Column complete all as specified and directed

Form Work For Rough Finished Surfaces Of Concrete Measured Flat For Column complete all as specified and directed

M &L Brick work with old size subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, Mean Radius, Built In Cm (1:6) complete all as specified and directed

M&L Brickwork With old size subclass ‘B’ bricks, Straight Or Curved On Plan To Any Radius In Half Brick Thick Walls, Built In Cm (1:4) complete all as specified and directed

M & L Rcc- M-25 (design Mix) Using 20mm Graded Aggregate For Lintel Band and slab beam complete all as specified and directed

Form Work For Rough Finished Surfaces Of Concrete Measured Flat For Lintel Band and slab beam complete all as specified and directed

M & L Rcc- M-25 (design Mix) Using 20mm Graded Aggregate For Chajja complete all as specified and directed

Form Work For Rough Finished Surfaces Of Concrete Measured Flat For Chajja complete all as specified and directed

M & L Rcc- M-25 (design Mix) Using 20mm Graded Aggregate For Slab complete all as specified and directed

Form Work For Rough Finished Surfaces Of Concrete Measured Flat For Slab complete all as specified and directed

M & L 10 Mm Thick 1:6 Cm Internal Plaster On Fair Faces Of Walls Finished Even And Smooth (without Using Extra Lime Or Cement) complete all as specified and directed

M & L 5 Mm Thick 1:3 Cm Plaster On Ceiling. Finished Even And Smooth (without Using Extra Lime Or Cement) complete all as specified and directed

M & L 15 Mm Thick (10 Mm + 5 Mm 1:6 Cm) External Plaster On Fair Faces Of Walls Finished Even And Smooth (without Using Extra Lime Or Cement) complete all as specified and directed

Supply Only Wpc complete all as specified and directed

M&L Pcc 1:3:6 Type C-0 for Filling In Door Frame all as specified.

S&F 105X60 MM Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

S&F 35 Mmm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for Joist, channel, angle, or tee sections, fixed independently, without connecting plates of Fe-410W(GdeE-250) qualityB etc. complete all as specified

S&F 12 mm thick Pre- laminated pressed wood board/ particle board as in Cupboard sutter/shelve/drawer all as specified and as directed

S&F Al Barrel Tower Bolt Of 200 Mm Long complete as specified

S&F Al Handles Cast Anodised 125 Mm Long complete as specified

S&F Al Drop Bolt Of 150 Mm Long complete as specified

S&F Floor Door Stoper Al Alloy 150mm Long complete as specified

S&F Ms Butt Hinges Of 100 Mm Long complete as specified

M&L Mild steel Work Such As Bands, Straps, Hold Fast, Clamps, Hooks & Similar Fe-410-o Or Fe-310-o.complete as specified

S&F aluminium powder coated framed windows, any pattern, fixed/side hung/sliding Three track using powder coated aluminium sections or approved make, with or without sash bars, suitable for 4.00 mm thick glazing and stainless steel alloy wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangements, frame of window should be of 1.5 mm thick section & shutter sec like handle/interlocking/top/bottom should be of 1.2 mm thick etc , complete all as specified and as directed Note :Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

S&F mild steel for Framed Work Such As Grills, Gratings, Etc.. With Ends Of Bars Shouldered And/or Riveted, Or Forged Into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework Of Water Tanks And Similar Work Conforming To Fe.290.gde-e-165 complete all as specified and directed

M&L preparation of new steel surface and applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Steel Primer all as directed.

M&L preparation of newly plastered surface and applying Two Coats Of Oil Bound Distemper Over One Coat Of Wall Primer Over 3 Mm Thick Wall Care Putty All As Specified With Approved Colour Pattern On Walls, Beams, Soffits, Columns, Etc. complete all as specified and directed

M&L Preparation of newly plastered surface and applying Three Coats Of White Wash All As Specified On Ceilings, Etc. complete all as specified and directed

M&L preparation of newly platered surface and applyingTwo Coats Of Cement Based Paint Over One Coat Of Wall Primer complete all as specified and directed

M&L machine cut Kota stone slab 20-25 mm thick as in flooring or trades of step or shelvesetc incl half round moulding over and including screed bed 20 mm thick in CM (1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishin complete as specified

M&L machine cut Kota stone slab 20-25 mm thick as in riser to step including 10 mm thick rendring in CM (1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing.

M&L Cement Concrete 25mm Thick 1:2:4 Type B0 (40mm Graded Aggregate) As In Sub Base complete as specified

M&L Cement Concrete 50 mm Thick 1:2:4 Type B1 (20 mm Graded Aggregate) As In Sub Base complete as specified

M&L Cement Concrete 100 mm Thick 1:4:8 Type D2 (40mm Graded Aggregate) As In Sub Base complete as specified

M&L Cement Concrete 75mm Thick 1:4:8 Type D2 (40mm Graded Aggregate) As In Sub Base complete as specified

M&L for Non Skid ceramic coloured jointless tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18Sqm but n. exc 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM(1:6) complete all as specified

All as above item 1.56 but as in skirting including 9- 10mm thick backing coat of tiles in CM(1:4) complete all as specified.

M & L 75mm Thick Plinth Protection Pcc (1:3:6) Using 20mm Graded Aggregate.

M&L Hardcore Of Guage Exc 63mm But N Exc. 100 Mm, Deposited, Spread And Levelled In Layers N Exc. 15 Cm Thick, Watered And Rolled/rammed To A True Surface complete as specified

M&L for water proofing treatment to non accessible RCC roofs by providing 10mm thick screed in CM 1:3 mixed with & including water proofing compound @ 3% by weight of cement & applying one coat of bituminous primer @ 0.30 kg/sqm & laying APP based polymer modified membrane with polyster non woven reinforced of weight not less than 3 kg/sqm 3mm thick with polythene finished sealing with side over laps of 75mm & 100mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint as per the makes approved by the Engr-in-Charge.

S&F vitrous china laboratory Sinks of size 450x300x150 with plugs, washers and wastes; including beding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each complete all as specified

S &F PVC floor Traps with grating 75mm Bore complete as specified

S&F Steel water tubing, medium grade, galvanised with & including all tube fittings & fixed / consealed in walls and ceiling or laid in floors including testing complete of 15 mm bore complete all as specified and directed

S&F Steel water tubing, medium grade, galvanised with & including all tube fittings & fixed / consealed in walls and ceiling or laid in floors including testing complete of 20 mm bore complete all as specified and directed

S&F Stop valve/ angle valve , cast copper alloy, chromium plated (concealed or non concelad type) fancy type handle, screwed down, high pressure with push type handle screwed for 15 mm bore iron pipe and fixed complete as specified

S& F Bib Taps, Cast Copper Alloy With Crutch Or Butterfly Handle Chromium Platedas specified

S&F Pvc Swr Pipe 75 Mm Waste Pipeas specified

S&F Pvc Bend Suitable For 75 Mm all as specified

S&F Rotational moulded polyethylene (HDPE) water storage tanks, double layer (cylindrical vertical with closed top) capacity 1000 litres hoisted and placed in posiition on PCC platform complete all as specified & as shown on drawings

S&F Ball Valve 25 Mm Dia For Water Tank all as specified

M&L Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types -Green Marble

Removing excavation material exe. 250m but n exc. 500m & deposited where directed at a level n exc. 1.5m above the starting point complete all as specified and directed

M&l for hardcore of guage n. exc63mm, deposited, spread & leveled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed

M&L Providing precast ce ment concrete type -B-1 1 :2 :4 in window or door cills, lintels,kerb stone bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to matchin CM 1:4. all as specified and directed

Sand filling under floors or in foundations including watering and consolidation all as specified.

M& L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade

M&L for PCC 1:2:4 type B 1 using 20 mm graded agg as in copping incl. necessary form work & finishing exposed surface of concrete complete all as specified and shown in drawing

M&L for PCC 1:2:4 type B2 using 40 mm graded stone aggregate as in surface channels, benching for manholes all as specified.

M&L for Precast cement concrte type B1 1:2:4 using 20mm graded stone agg set in CM (1:6) in cover slabs for manhole and similar articles etc. complete all as specified and directed

M&L for MS round bars 8 mm dia, cut to length, bend to shape required including cranking, bending and binding with MS wire not less than 0.90 mm dia or securing with clips.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 on walls, finished even & fair w/o using extra cement.

Extra for forming fair finished drains or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds materials/stoppage and complete all as specified

M&L for salt glazed stone ware 150 mm internal dia drain pipes grade `A’ laid in trenches and jointed complete all as specified and directed

M&L for concrete cement 1:3:6 type C-2 to drain pipes including packing under and haunching agaainst the sides of the pipes after they are laid and tested for 150mm internal dia of pipe complete all as specified and directed

Cutting into exisiting manhole for connecting new drains, making good to pipe rendering, cutting out exisitng benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required.

M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - R Y B, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed modular steel terminal boxes of thickness not less than 1.2 mm covered with suitable and required size of modular box, plate with cover for mounting modular switches, sockets, fan regulators complete including making good the wall surfaces with matching colour on wall for the following

One light point controlled by one switch.

One fan point controlled by one switch.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

M&L for Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete all as specified and directed

S&F modular switch one way 6 amp 1 module all as specified and directed

S&F modular switch one way 16 amp 1 module all as specified and directed

S&F modular socket 6/16 - 2/3 pin combined 2 module all as specified and directed

S&F modular socket 6 amp 3pin, 2 module all as specified and directed

S&F Ceiling rose 6 amp, 3 plates polycarbonate body complete all as specified and directed

S&F modular hum free electronic step fan regulator, 100 watt 2 module all as specified and directed

S&F MCB distribution board SPN, 240 volts, 12 ways powder coated, doble door,CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F in replacement existing UNSV LED batten (20W) made of polycarbonate housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 120+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.90,IP 20 complete all as specified and directed

S&F in replacement existing UNSV LED 20W streetlight made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LED's with secondary optics and IP65 protection complete with fixing arrangement and connections as directed

S&F Decorative wall light up to 20W watt, 6500K including connecting electricity to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm, PF>0.90 and life> 15000 hrs all as required and specified.

S&F MCB distribution board ETPN, 415 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal sizes:-

2x4 sqmm + 1x4 sqmm earth continuity conductor in 20 mm dia conduit..

2x6 sqmm + 1x6 sqmm earth continuity conductor in 20 mm dia conduit..

Supply and fixing powewr unit for AC or geyser 3.5 KW four module including sunken modular GI metal boxes not less than 1.2mm thick and white modular mounting plates with frame complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-5 of SSR Part-I. all specified

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single pole 6 to 32 amp.

Double pole 32 amp.

TPN 63 Amps

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and laying DWC(Double wall corrugated) HDPE pipe,ISI marked,IS 16205(part 24):2017 part 2 of outer dia 50 mm and inner dia 38 mmwith smooth internal and profiled external surface for non pressure underground cable including all connected acceseries like coupler,o-ring etc complete all as specified and directed

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25sq. mmX 4Core complete all as specified and directed

Cutting existing steel tubing for alterations or aditions of pipe size 40/50 mm bore and screwing complete all as specified and directed

Supply and fix Valve, globe conforming to IS 9338, 50mm (2”) dia pipe.

S&F Stop valves, 20mm,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type chromium plated,20mm dia complete all as specified and directed

Shreeganesh Construction (BID ID -3286013)

DMA PROJECTS (BID ID -3287819)

SNEH TRADERS (BID ID -3288574)

Shree Karni Construction (BID ID -3289008)

M/s Matadeen Ramchandra Agarwal (BID ID -3285401)