DEFPROC

Active

Works

Civil Works

REPAIR POLISHING AND PAINTING OF WOODEN STEEL FURNITURE AND TP FURNITURE OF VARIOUS UNITS UNDER GARUDA AT NAVAL BASE UNDER GE NW KOCHI

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

KOCHI | Ernakulam, Kerala

Amount: ₹44.8 LCloses: 7 Nov 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published16 Oct 2026
Submission Opens31 Oct 2026
Closes7 Nov 2026
Bid Opening14 Nov 2026

Tender Value

₹44.8 L

EMD Value

₹89,600

Closing Date

7 Nov 2026, 6:00 pm

Tender Inviting Organisation

Name

GE(NW)KOCHI

Address

GARRISON ENGINEER (NW) MILITARY ENGINEER SERVICES NAVAL BASE POST -682 004

Work Description

AS PER BOQ AND TENDER DOCUMENT

Tender Information

Tender ID

2026_MES_794392_1

Reference Number

8647_GE_NW

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Item Rate

Period of Work

365 days

Location

KOCHI

Source Website

Subscribe to view

Eligibility / Pre-Qualification

AS PER TENDER DOCUMENT

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredSCANNED COPY OF APPLICATION, TENDER FEE AND EMD IF APPLICABLE (.pdf)

RequiredSCANNED COPY OF ENLISTMENT LETTER (.pdf)

RequiredSCANNED COPY OF PRE QUALIFICATION DOCUMENTS AS PER NIT (.pdf)

RequiredEPF REGISTRATION (.pdf)

RequiredGST REGISTRATION (.pdf)

RequiredBID SECURE DECLARATION (.pdf)

Finance

RequiredPRICE BID (.xls)

Fee & Financial Details

Tender Fee Amount

₹500

Tender Fee Payable To

GE(NW)KOCHI

EMD Fee Amount

₹89,600

Important Dates

Last Activity

16 Oct 2026

Published

16 Oct 2026

Bid Opening

14 Nov 2026

Download Starts

16 Oct 2026

Download Ends

7 Nov 2026

Submission Starts

31 Oct 2026

Clarification Period

16 Oct 2026 - 31 Oct 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (152 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Recaning the worn out and unserviceable plastic cane from the furniture items and carry out recanning as per Godrej pattern using white/coloured cane having minimum width of 2.38mm and 0.4mm thick, half round gola type, weighing not less than 6gm per RM, incl making provn of an additional strand i.e 3 strand in place of two for the centre holes when the total span of caning work exceeding 350mm, complete all as specified and as directed by the Engineer in charge for Chair Dining -Drg No : FD-224. General Notes for Item Nos 1 to 5 Canning seat and back of chairs of all types shall carryout with 2 mm wide for general caning work and border/periphery caning work with 3 mm wide plastic cane white/cream color weight of cane not less than 0.250 kg/100 RM including removing old damaged cane(caning shall be in Godrej patttern) all as shown on respective drawings and specified and directed by the Engineer-in-charge.	360	RM	-	-
2	All as per item No 01 here-in-before but for chair Easy (Seat and back) Drg No : FD-229/201	240	RM	-	-
3	All as per item No01 here-in-before but for chair Verandha (Seat and back) Drg No : FD-19/256/359	280	RM	-	-
4	All as per item No 01 here-in-before but for stool dressing CB (Seat only) Drg No : FD-27 & FD 280	30	RM	-	-
5	All as per item No 01 here-in-before but for chair Writing/CBA Office (Seat only) Drg No : FD-250 & FD-280	40	RM	-	-
6	Material and labour for removing the unserviceable/broken rear leg and providing new one with First class hard wood (teak wood) duly finished and polished fully including tightening of the frame work for Chair dining all as specified and as directed by the Engineer-in-Charge.(Drg No. FD-279)	100	Each	-	-
7	Material and labour for removing the unserviceable/broken rear leg and providing new one with First class hard wood (teak wood) duly finished and polished fully including tightening of the frame work for Chair writing all as specified and as directed by the Engineer-in-Charge.(Drg No.FD-280)	80	Each	-	-
8	Material and labour for removing the unserviceable/broken rear leg and providing new one with First class hard wood (teak wood) duly finished and polished fully including tightening of the frame work for Chair Easy all as specified and as directed by the Engineer-in-Charge(Drg No.FD-229 )	80	Each	-	-
9	Material and labour for removing the unserviceable/broken rear leg and providing new one with First class hard wood (teak wood) duly finnished and polished fully including tightening of the frame work for Sofa single seater all as specified and as directed by the Engineer-in-Charge(Drg No.FD-258)	60	Each	-	-
10	Material and labour for removing the unserviceable/broken rear leg and providing new one with First class hard wood (teak wood)duly finished and polished fully including tightening of the frame work for Sofa two seater all as specified and as directed by the Engineer-in-Charge(Drg No.FD-373)	40	Each	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.35 MB

Work Item Documents

PS8647.pdf

Additional Documents • 0.17 MB

Tender8647.pdf

Tender Documents • 0.73 MB

BOQ_890948.xls

BOQ • 0.44 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Recaning the worn out and unserviceable plastic cane from the furniture items and carry out recanning as per Godrej pattern using white/coloured cane having minimum width of 2.38mm and 0.4mm thick, half round gola type, weighing not less than 6gm per RM, incl making provn of an additional strand i.e 3 strand in place of two for the centre holes when the total span of caning work exceeding 350mm, complete all as specified and as directed by the Engineer in charge for Chair Dining -Drg No : FD-224. General Notes for Item Nos 1 to 5 Canning seat and back of chairs of all types shall carryout with 2 mm wide for general caning work and border/periphery caning work with 3 mm wide plastic cane white/cream color weight of cane not less than 0.250 kg/100 RM including removing old damaged cane(caning shall be in Godrej patttern) all as shown on respective drawings and specified and directed by the Engineer-in-charge.

360

All as per item No 01 here-in-before but for chair Easy (Seat and back) Drg No : FD-229/201

240

All as per item No01 here-in-before but for chair Verandha (Seat and back) Drg No : FD-19/256/359

280

All as per item No 01 here-in-before but for stool dressing CB (Seat only) Drg No : FD-27 & FD 280

All as per item No 01 here-in-before but for chair Writing/CBA Office (Seat only) Drg No : FD-250 & FD-280

Material and labour for removing the unserviceable/broken rear leg and providing new one with First class hard wood (teak wood) duly finished and polished fully including tightening of the frame work for Chair dining all as specified and as directed by the Engineer-in-Charge.(Drg No. FD-279)

100

Each

Material and labour for removing the unserviceable/broken rear leg and providing new one with First class hard wood (teak wood) duly finished and polished fully including tightening of the frame work for Chair writing all as specified and as directed by the Engineer-in-Charge.(Drg No.FD-280)

Each

Material and labour for removing the unserviceable/broken rear leg and providing new one with First class hard wood (teak wood) duly finished and polished fully including tightening of the frame work for Chair Easy all as specified and as directed by the Engineer-in-Charge(Drg No.FD-229 )

Each

Material and labour for removing the unserviceable/broken rear leg and providing new one with First class hard wood (teak wood) duly finnished and polished fully including tightening of the frame work for Sofa single seater all as specified and as directed by the Engineer-in-Charge(Drg No.FD-258)

Each

Material and labour for removing the unserviceable/broken rear leg and providing new one with First class hard wood (teak wood)duly finished and polished fully including tightening of the frame work for Sofa two seater all as specified and as directed by the Engineer-in-Charge(Drg No.FD-373)

Each