Work of ARC for Erection &Maintenance of HT/LT Line and TC work and other maintenance work O/H & UGXLPE Cable & Laying of underground cable network with terminations inthe area of DGVCL under all schemefor Rander T-1, T-2 , Adajan , Pal ,Palanpore , Ramnagar Sub division under Rander Division and if required work to be carried out at other subdivision under Rander Division.

Name of Work : Work of ARC for Erection & Maintenance of HT/LT Line and TC work and other maintenance work

O/H & UG XLPE Cable & Laying & Commissioning of UG Cable with as per REC Norms for Rander T-1,Rander T-

2,Pal,Adajan,Ramnagar, Palanpore Sub division under Rander Division under All scheme and if required work to be

carried out in Other Sub Division under Rander Division.

Part- A- HT,LT& TC WORK & O/H UG XLPE Cable

CAPITAL WORK LABOUR RATES FOR FY 2024-25 (WITHOUT GST)

Item Code Item Unit FY 2024-25

HT TAPPING FROM THE EXISTING POLE INCLUDING FIXING OF

CROSS ARMS, CLAMPS ANTI-CLIMBING DEVICES, DANGER

BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF

FABRICATED MATERIALS AND NUMBERING COMPLETE WITH

COST OF PAINTS AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF PSC POLES OF 8 *200 KG INCLUDING

EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING

OFCROSS ARMS, TOP FITTING CLAMPS ANTI-CLIMBING

DEVICES, INSULATORS ETC. COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND

ERECTION OF STEEL POLES OF 9 TO 11 METERS INCLUDING

EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING

OFCROSS ARMS, TOP FITTING CLAMPS ANTI-CLIMBING

DEVICES, DANGER BOARD, INSULATORS ETC. COMPLETE AND

PAINTING OF STEEL POLE, FABRICATED MATERIALS USED ON

THE POLEAND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF

GUY SET AND EARTHING.

ERECTION OF STEEL POLE OF 13 METERS FOR RAILWAY

CROSSING ON BG/MG/NG LINE FOR 0.400/11/22KV OVERHEAD

LINES I.E INCLUDING EXCAVATION OF PIT & REFILLING OF

EARTH, FIXING CROSS ARMS, TOP FITTING CLAMPS,ANTI-

4 9926000004 CLIMBING DEVICES DANGER BOARD, INSULATORS ETC. No.

COMPLETE AND PAINTING OF STEEL POLES, FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING WITH

COSTOF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF 8 METERS

KG PSC POLES INCLUDING EXCAVATION OF PITS & REFILLING

OF EARTHING, FIXING OF CHANNELS, SUPPORTING

ANGLES,CLAMPS, ANTI-CLIMBING DEVICES DANGER

5 9926000005 BOARDS,INSULATORS ETC.COMPLETE AND PAINTING OF No.

FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE OF 9 TO

METERS.STEEL POLE INCLUDING EXCAVATION OF PITS &

REFILLING OFEARTH, FIXING OF CHANNELS, SUPPORTING

ANGLES, CLAMPS,ANTI-CLIMBING DEVICES DANGER BOARDS,

6 9926000006 INSULATORS ETC.COMPLETE & PAINTING OF No.

POLES,FABRICATED MATERIALSUSED ON THE POLES AND

NUMBERING WITH COST OF PAINTSAS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND

EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF

AB SWITCH, HG FUSES OF 8 MTRS 200 KG PSC POLES

INCLUDING EXCAVATION OF PITS AND REFILLING OF

EARTH,FIXING OF CHANNELS SUPPORTING ANGLES, CLAMPS,

ANTI-CLIMBING DEVICES, DANGER BOARDS,

INSULATORS,DOFUSES ETC. COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COSTOF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDINGOF ERECTION OF GUY SET

AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF

AB SWITCH,HG FUSES, 9 TO 11 METERS STEEL POLES

INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH,

FIXING OFCHANNEL, SUPPORTING ANGLES, CLAMPS, ANTI-

8 9926000008 CLIMBING DEVICES , DANGER BOARDS, INSULATORS, ETC. No.

COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS

USED ON THE POLES AND NUMBERING WITH COST OF PAINT

AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING

OFAB SWITCH, HG FUSES, TRANSFORMERS, LIGHTENING

ARRESTORS, DISTRIBUTION BOX. OF 8 METER,200KG PSC

POLE METERS POLES INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF TRANSFORMERS

FROMSTORES TO SITE, FIXING OF CHANNELS, SUPPORTING

ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING

DEVICES DANGER BOARDS, CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS

USEDON THE POLES AND NUMBERING WITH COST OF PAINT

AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF

AB SWITCH,HG FUSES TRANSFORMERS, LIGHTENING

ARRESTORS, DISTRIBUTION BOX 9 TO 11 METERS STEEL

POLES INCLUDING EXCAVATION OF PITS & REFILLING OF

EARTH CARTING OF TRANSFORMERS FROM STORE TO SITE,

FIXINGOF CHANNELS SUPPORTING ANGLES, BRACING, CROSS

ARMS,CLAMPS, ANTICLIMBING DEVICES, DANGER

BOARDS,CONDUCTOR AND CABLE WIRING ETC. COMPLETE

AND PAINTING OF POLES FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTIONS OF GUY SETS

ERECTION OF GUY SET INCLUDING EXCAVATION OF PITS &

REFILLING OF EARTH AS PER STANDARD SPECIFICATION

11 9926000011 WITH STAY CLAMPS, STAY WIRE, ANCHOR ROD, TURN No.

BUCKLE, EYEBOLT, GUY INSULATOR, CEMENT CONCRETE

BLOCK ETC. BUT EXCLUDING CONCRETING.

CONCRETING OF POLES, GUYS, ETC. INCLUDING COST OF

CEMENT SAND METAL (1:2:4) AND WATER ETC. AS PER

STANDARD SPECIFICATION.(cement Should be 53 grade) used for

ERECTION OF COIL TYPE EARTHING INCLUDING COST OF

13 9926000013 COAL,SALT ETC. BUT WITHOUT COST OF GI WIRE AS PER No.

STANDARD SPECIFICATION(20kg solt+20kg coal)

ERECTION OF GI PIPE/CI PLATE TYPE EARTHING

INCLUDINGCOST OF COAL SALT ETC. BUT WITHOUT COST OF

PIPE/GIPLATE GI WIRE AS PER STANDARD

SPECIFICATION.(20kg solt+20kg coal)

ERECTION OF STREET LIGHT FIXTURE COMPLETE WITH

CLAMPS, BRASS NIPPLE, BRASS HOLDER TECK WOOD

BUSH,REFLECTORS FUSE, WIRING ETC. AS PER STANDARD

SPECIFICATION BUT EXCLUDING COST OF MATERIALS.

STRINGING OF(30mm2)ACSR/34MM@,55MM2 AAA CONDUCTOR

for ALL TYPE OF CONDUCTOR (EXCEPT DOG CONDUCTOR)

FOR 11/22KV & LT LINES INCLUDING FIXING OF INSULATORS,

BINDING JUMPERING ETC.

STRINGING OF GI WIRE 8 SWG INCLUDING BINDING

PROVIDING SINGLE PHASE SERVICE CONNECTION WITH PVC

2.5/4MM2 TWIN CORE CABLE FROM TERMINAL POLE TO

18 9926000018 METERING POINT INCLUDING FIXING OF METER WITH METER No.

EARTHING COMPLETE WORK AS PER STANDARD

SPECIFICATION BUT EXCLUDING COST OF MATERIALS.

PROVIDING THREE PHASE 4 WIRE SERVICE CONNECTION

WITH PVC 4MM2/10MM2 FOUR CORE CABLE FROM TERMINAL

19 9926000019 POLE TO METERING POINT INCLUDING FIXING OF METER WITH No.

METER EARTHING COMPLETE WORK AS PER STANDARD

SPECIFICATION BUT EXCLUDING COST OF MATERIALS.

ADDITIONAL COST FOR EXCAVATION OF PIT IN HARD ROCK

AREA FOR ERECTION OF POLE/ GUY ETC. AS PER STANDARD

SPECIFICATION OVER & ABOVE NORMAL COST COVERED

AGAINST EXCAVATION OF PIT UNDER NORMAL SOIL FOR

ERECTION OF POLE,GUY, DOUBLE POLE STRUCTURE

EARTHING WITH THE APPROVAL OF SUPDT.ENGINEER.

21 9926000021 PROVIDING GUARDING TO HT LINE ON ROAD/ RAIL CROSSING. MTR

22 9926000022 PROVIDING GUARDING OF LT LINES ON ROAD/RAIL CROSSING. MTR

23 9926000023 LT LINE TAPPING- SINGLE PHASE No.

24 9926000024 LT LINE TAPPING- THREE PHASE No.

Stringing/LAYING OF OVER HEAD LT CABLE FOR ROAD

25 9926000025 CROSSING,HT LINE CROSSING AND TELEPHONE LINE No.

CROSSING ETC.(PER SPAN)

ERECTION OF SINGLE POLE STRUCTURES WITH , HG

FUSES,TRANSFORMERS, LIGHTENING ARRESTOR,

DISTRIBUTION BOX. ON 8 METERS 200 KGAND PSC POLE

INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH,

CARTING OF TRANSFORMERS FROM STORES TO SITE, FIXING

OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS

ARMS CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED ON THE POLE

AND NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OFGUY SETS AND

ERECTION OF SINGLE POLE STRUCTURES WITH MOUNTING

OFAB SWITCH , HG FUSES,TRANSFORMERS,

LIGHTENINGARRESTOR, DISTRIBUTION BOX. ON 9 to

METERS RSJ POLE INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF TRANSFORMERS FROM

STORES TO SITE, FIXING OF CHANNELS, SUPPORTING

ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING

DEVICES DANGER BOARDS, CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS

USED ON THE POLE AND NUMBERING WITH COST OF PAINT

AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OFGUY SETS AND EARTHING.

ERECTION OF PSC POLES OF 10 *270 KG INCLUDING

EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING OF

CROSS ARMS, TOP FITTING CLAMPS ANTI-CLIMBING DEVICES,

28 9926000028 INSULATORS ETC. COMPLETE AND PAINTING OF FABRICATED No.

MATERIALS USED ON THE POLES AND NUMBERING WITH

COST OF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF 10 METERS

KG PSC POLES INCLUDING EXCAVATION OF PITS & REFILLING

OF EARTHING, FIXING OF CHANNELS, SUPPORTING

ANGLES,CLAMPS, ANTI-CLIMBING DEVICES DANGER

29 9926000029 BOARDS,INSULATORS ETC.COMPLETE AND PAINTING OF No.

FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

EARTHING.(WITHOUT AB SWITCH)

STRINGING OF 100MM2 ACSR/100MM2 AAAC CONDUCTOR FOR ONE

30 9926000030 11/22KV & LT LINES INCLUDING FIXING OFINSULATORS, COND

BINDING JUMPERING ETC. PER KM

STRINGING OF DOG CONDUCTOR FOR 11/22KV & HT LINES

INCLUDING FIXING OF INSULATORS, BINDING JUMPERING ETC.

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING

OF AB SWITCH, HG FUSES, TRANSFORMERS, LIGHTENING

ARRESTORS, DISTRIBUTION BOX. OF 10 METERS 270 KGAND

PSC POLES INCLUDING EXCAVATION OF PITS AND REFILLING

OF EARTH, CARTING OF TRANSFORMERS FROMSTORES TO

SITE, FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS

CROSS ARMS CLAMPS, ANTI-CLIMBING DEVICES,DANGER

BOARDS, CONDUCTOR AND CABLE WIRING ETC.COMPLETE

AND PAINTING OF FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF

GUY SETS AND EARTHING.

DISMENTALLING OF 8 MTR PSC POLE WITH CREDITING OF

33 9926000033 FABRICATION AT STORE & STACKING OF POLE SAFELY ON No.

ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF 10 MTR PSC POLE WITH CREDITING OF

34 9926000034 FABRICATION AT STORE & STACKING OF POLE SAFELY ON No.

ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC

POLE) (WITH TRANSFORMER) WITH CREDITING OF

35 9926000035 FABRICATION & TRANSFORMER AT STORE & STACKING OF No.

POLE SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC

POLE) (WITHOUT TRANSFORMER) WITH CREDITING OF

FABRICATION AT STORE & STACKING OF POLE SAFELY ON

ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

STRINGING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, LT

SHACKLE INSULATOR ETC. FOR FIXING OF MESSENGER WIRE

AND TO PROVIDE SERVICE CONNECTION ON AERIAL BUNCH

CABLE BY INSULATED PIERCEING CONNECTORS THROUGH

SERVICE CONNECTION BOX COMPLETE AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE.

STRINGING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ

MM INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL

DESIGN SUSPENSION / TENSION CLAMP, FIXING OF CROSS

38 9926000038 ARM, LT SHACKLE INSULATOR ETC. FOR FIXING OF KM

MESSENGER WIRE AND TO PROVIDE SERVICE CONNECTION

ON AERIAL BUNCH CABLE BY INSULATED PIERCEING

CONNECTORS THROUGH SERVICE CONNECTION BOX

COMPLETE AS REQUIRED & DIRECTED BY ENGINEER IN

STRINGING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM,

BINDING TO PIN INSULATOR,PREPARING SHACKLE

POINT,JUMPERS ETC. AS REQUIRED & DIRECTED BY

ENGINEER IN CHARGE

STRINGING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM,

BINDING TO PIN INSULATOR,PREPARING SHACKLE

POINT,JUMPERS ETC. AS REQUIRED AND DIRECTED BY

ENGINEER IN CHARGE

STRINGING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, LT

SHACKLE INSULATOR ETC. FOR FIXING OF MESSENGER WIRE

AND TO PROVIDE SERVICE CONNECTION ON AERIAL BUNCH

CABLE BY INSULATED PIERCEING CONNECTORS THROUGH

SERVICE CONNECTION BOX COMPLETE AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE.

DISMENTALING OF RSJ (9/11 METER) POLE AND CREDITING

THE OLD MATERIAL TO STORE

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG

PSC POLE(WITHOUT TRANSFORMER) WITH CREDITING OF

FABRICATION AT STORE AND STACKING OF POLE SAFELY ON

ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG

PSC POLE(WITH TRANSFORMER) WITH CREDITING OF

FABRICATION AT STORE AND STACKING OF POLE SAFELY ON

ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTLING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM AND

45 9926000045 CREDITING FITTING OF ALL ACESSARIES AND FABRICATION KM

TO DEPARTMENTAL STORE

DISMENTLING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM AND

46 9926000046 CREDITING FITTING OF ALL ACESSARIES AND FABRICATION KM

TO DEPARTMENTAL STORE

DISMENTALING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM AND

47 9926000047 CREDITING FITTING OF ALL ACESSARIES TO DEPARTMENTAL KM

DISMENTALING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35

48 9926000048 SQ MM AND CREDITING FITTING OF ALL ACESSARIES TO KM

DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ

49 9926000049 MM AND CREDITING FITTING OF ALL ACESSARIES TO KM

DEPARTMENTAL STORE.

RESTRINGING OF ALL TYPE OF CONDUCTOR (EXCEPT DOG ONE

50 9926000050 CONDUCTOR) FOR 11/22KV & LT LINES INCLUDING FIXING OF COND

INSULATORS, BINDING JUMPERING ETC. PER KM

RESTRINGING OF DOG CONDUCTOR FOR 11/22KV HT LINES

INCLUDING , BINDING JUMPERING ETC.

LABOUR CHARGE FOR THE INSTALLATION OF NEW DTR

METER. (METER WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR THE REPLACEMENT OF DTR METER

53 9926000053 AND OLD METER SHOULD BE CREDITED TO SDN STORE. No.

(METER WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR PROVIDING CT COIL FOR DTR METER

CONNECTION. (CT COIL WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR REPLACEMENT OF CT COIL FOR DTR

55 9926000055 METER CONNECTION AND OLD CT SHOULD BE CREDITED TO PER CT

SDN STORE. (CT COIL WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR FIXING OF MMB FOR DTR METER (MMB

WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR REPLACEMENT OF DTR METER BOX.

(METER WILL BE PROVIDED BY DGVCL)

PROVIDING / REPLACEMENT OF 1.5 SQ MM 10 CORE COPPER

CABLE 3.5 METER (CABLE TO BE PROVIDED BY AGENCY)

LABOUR CHARGE FOR PROVIDING/RECONNECTION OF PER

59 9926000059 TERMINAL CONNECTION WITH PROPER SIZE OF LUGS. (LUGS TERMINA

COST IS BORNE BY AGENCY) TION

LABOUR CHARGE FOR THE SPOT READING OF DTR METER

WITH DETAIL SURVEY OF DEFECT IF ANY. A DULY SIGN COPY

BY SURVEYOR PERSON OF AGENCY IN PRO-FORMA REPORT

60 9926000060 SHOULD BE SUBMITTED TO SDN OFFICE.(* ONLY IF ALL PER DTR

PARAMETER OF VOLTAGE, CURRENT & LOAD AS SHOWN IN

PER-FORMA IS FILLED) AS PER THE INSTRUCTION OF

ENGINEER IN-CHARGE.

LABOUR CHARGE FOR THE SPOT READING OF DTR METER

WITH DETAIL SURVEY OF DEFECT IF ANY. A DULY SIGN COPY

BY SURVEYOR PERSON OF AGENCY IN PRO-FORMA REPORT

SHOULD BE SUBMITTED TO SDN OFFICE. (DULY FILL PER-

FORMA IN FAULT CONDITION IN WHICH READING PARAMETER

IS NOT SHOWN IN METER)

INSTALLATION OF DTR METER INCLUDING METER BOX,

PROVIDING & FIXING OF 1.5SQ MM SINGLE STRAND 10 CORE

62 9926000062 ARMOURED COPPER CABLE (3.5METER), TERMINATION IN No.

METER & COIL ETC.(METER, METER BOX, C.T./P.T. COIL WILL

BE PROVIDED BY DGVCL)

INSTALLATION OF DTR METER INCLUDING METER BOX,

TERMINATION IN METER & COIL ETC. (WITHOUT 10CORE

COPPER CABLE) (METER, METER BOX, C.T./P.T. COIL WILL BE

PROVIDED BY DGVCL)

Binding of messanger Conductorat with a distance not more than

64 9926000064 0.75 mtr with 6 turns minimum on XLPE Cable with single strand No

binding wire (including cost of binding wire)

Supply and Installation of 11/22 kV Distribution Transformers HT

65 9926000086 Terminal protector (UV Resistance) with using 95/120/150 sq.mm long PER SET

barrel aluminum lug. (1Set = 3 Nos i.e. on R, Y, B)

Supply & Installation of HT EPR Tap on 11/22 kV Distribution

Transformer with replacement of bare conductor by HT ABC

66 9926000087 conductor (DO bottom side to transformer) after removal of semi PER SET

conductor by HT ABC (6 inch both side). HT ABC to be supplied by

DGVCL. (1Set = 3 Nos i.e. on R, Y, B)

Supply, Installation, Testing and Commissioning of Maintenance Free,

Ready Capsule, Pipe-In-Cage (Pic) Type, Earth Electrodes for HT

67 9926000088 Feeder Pole Having 2000 mm Electrode Length as per the Tender NO

Specifications and Drawing. (All Materials Will Be Supplied By

Supply, Installation, Testing and Commissioning of Maintenance Free,

Ready Capsule, Pipe-In-Cage (Pic) Type, Earth Electrodes for HT

68 9926000089 Feeder Pole Having 3000 mm Electrode Length as per the Tender NO

Specifications And Drawing. (All Materials Will Be Supplied By

Supply and Installation of 25 X 3 mm GI Strip having hot dip-

galvanized-zinc coating of 80-100 microns without any joints or

welding. Both the end of the GI strip should be connected with GI nut

bolts and required fabrication work for giving separate earthing

(1) Neutral of the transformer

(2) MS structures of the transformer center (Approximately 25 meter

GI strip per transformer centre

- as per requirement and instruction of Engineer in- charge) (All

Materials will be supplied by Agency)

Supply and Installation of uPVC standard make Pipe of 1.25" diameter

for covering GI strip with UV protected Cable Ties of 550 X 7.6 mm

70 9926000092 size to bind with pole face(Approximately 25 meter uPVC pipe for GI Meter

strip covering per transformer centre -as per requirement and

instruction of Engineer in-charge.

Supply & fixing of upto 33 kV Conducotr sleev for Busbar to Drop out

Fuse and Drop out fuse to Transformer H.T. including Busbar (12 mm

sleev) as per technical specification. (All Materials will be supplied by

Supply & fixing of upto 33 kV Conducotr sleev for Busbar to Drop out

Fuse and Drop out fuse to Transformer H.T. including Busbar(15 mm

sleev) as per technical specification. (All Materials will be supplied by

Supply & fixing of Disc type Red Color FRP(Non-flammable) material

with Weather resistant, Non-conductive bird guard OD=300 MM,

73 9926000095 ID=33 MM, Width =1.25 MM, one side cut from ID to OD. (All NO

Materials will be supplied by Agency)

Providing and fixing of LT Terminal protectors i.e. Re-useable boot

74 9926000096 (LT Side 1.1 kV) including LT (1.1 kV) insulating taps. All live part at No

LT side shall be covered with fixing of LT insulating taps.

75 Nylon Net around Transformer Center

75.1 9926000097 Nylon Net (12 * 15 ft) Per Net

75.2 9926000098 Nylon Dori Per TC

Labour charge for fitting Nylon Net (All fabricated material for fitting

nylon net shall be provided by DGVCL)

LABOUR RATES FOR MAINTENANCE WORKS FOR THE

Item Code Details of works Unit FY 2024-25

(A) LINE MAINTENANCE

1 9924000001 Cutting of Tree branches surounding HT/LT line Per Tree

Replacement of old jumpers & providing new double jumpers with 8"

binding [D Type] & capsuling with PVC pipe etc

3 9924000005 Support pole for Stay PSC/STP/RSJ No.

4 9924000006 Pin binding of conductor 11/22kv Pin insulator No.

Pin binding of conductor 11/22kv Pin insulator per pole in costle area

with cleaning .

6 9924000008 Pin binding of conductor LT shakel insulator No.

7 9924000009 Replacement of one/both disc.insulator at strain pole No.

8 9924000010 Replacement of LT shackle insulator at cut point No.

9 9924000011 Refixing of V cross Arm No.

10 9924000012 Replacement of V cross Arm (With Transportation & Painting) No.

11 9924000013 Refixing of Top fitting in proper position No.

12 9924000014 Replacement of Top fitting No.

13 9924000015 Replacement of LT cross Arm No.

14 9924000016 Providing DO fuse on DP with carting & jumpuring(ONE DO FUSE) No.

Numburing of pole with paint by preparing back ground of one colour

and have lettering(height 3" * width 0.5") using stensil

16 9924000018 Fixing of MMB(1PH.) at consumer end No.

17 9924000019 Fixing of MMB(3PH.) at consumer end No.

18 9924000020 Replacement of (1ph.) meter for Urban area No.

19 9924000021 Replacement of (1ph.) meter for Rural area No.

painting consumer no. on MMB (Urban) (with letter size height

40mm* width 8mm)

painting consumer no. on MMB (Rural) (with letter size height 40mm*

22 9924000024 Replacement of deteriorated Single phase Service line No.

Fixing of new dist. Box with complete wiring including clamps,nut bolts

Reparing of guarding involving reshaping of bearer wire cross lacing

25 9924000027 Painting of steel fabricated material of RSJ DO DP structure with paint No.

Painting of steel fabricated material of RSJ pole mounted transformer

double pole structure with paint

27 9924000029 Painting of steel fabricated material of RSJ single pole with paint No.

painting of steel fabricated material of PSC Single pole (HT line) with

painting of steel fabricated material of PSC DO DP double pole with

painting of steel fabricated material of PSC double pole at pole

mounted transformer with paint

31 9924000033 Providing line seperater single phase No.

32 9924000034 Providing line seperater three phase No.

Replacement / Providing of stay insulator along with adjustment of

tension in stay wire

Replacement of deteriorated /providing LT dist. Box with new up to

100KVA capacity & crediting it to store.

Replacement of deteriorated /providing LT dist. Box with new above

100KVA capacity & crediting it to store.

36 9924000038 Adjustment of tension in stay wire No.

37 9924000039 Refitting of LA No.

Converting pin point to Shackle point including dismentaling &

38 9924000040 location

restringing etc.

replacement of 11KV Pin insulator with providing new double pin

replacement of 22KV Pin insulator by new 11kv pin insulator with

spares & providing new double pin binding

41 9924000043 Providing 11kv double disc insulators with binding & restringing No.

Replacement of existing 11kv conductor (all size) with new double pin

43 9924000046 Plumbing of PSC Pole with straightening at pin point No.

44 9924000047 Plumbing of PSC Pole with straightening at tension point No.

Plumbing of tilted DP structure (PSC/RSJ/STP) with refilling of stone

Providing new 11kv AB /GO switch with fabrication and insulated

colour code jumper, binding, lugs etc

Replacement of old 11kv AB /GO switch with providing new insulated

jumper, binding, lugs etc

Providing cage type loop guard in verticle LT line with using PVC reel

48 9924000052 per pole

Labour charges for replacement /providing of MMB & service with all

accessories for three phase connection

Labour charges for replacement /providing of MMB & service with all

accessories for single phase connection

Dismentalling of existing Dist.X'mer center(RSJ /STP POLE)

51 9924000055 25/63/100/200 KVA with all fabrication & creditig the old material to No.

Disconnection from LT pole 1 phase

Reconnection from LT pole 1 phase

( payment after receipt of R/C charges)

54 9924000058 Disconnection from LT pole 3 phase No.

Reconnection from LT pole 3 phase

( payment after receipt of R/C charges)

Dismentaling & removing of service line from pole & crediting to S/dn

Dismentaling & removing of service line from pole & crediting to S/dn

58 9924000062 Reconnection of service line complete with PVC cable (1 Ph) No.

59 9924000063 Reconnection of service line complete with PVC cable (3 Ph) No.

Providing spiral type earthing by G.I. NO 8(weight 2kg -5mtr in length)

with salt and coal 10kg each, including pvc rigid pipe 20mm dia(

1.5mtr length) to pass exposed part of G.I. wire at consumer end with

all materials, earth resistance should be less than 2 ohms

Providing and fixing of signle core 1.5 sq mm single strand copper

insulated cable with cable nail clip for spiral type earthing at consumer

end. The end of G.I. no 8 is to be connected by connector with copper

61 9924000070 cable of which other end shall be connected to the earth terminal of per meter

meter box. This item shall be used in location where there is more

distance between earth terminal and earthing terminal of meter. (All

materials supplied by contractor)

LABOUR RATE FOR UNDERGROUND CABLE WORK FOR FY 2024-25 (WITHOUT GST)

Part-B for UG Cable

Item Code Description Unit FY 2024-25

Labour charge for excavation of cable trench of 400mm width x

1200mm depth, in any type of soil for laying of cable of size up to

240 mm2 (For additional cable 200 mm additional width shall be

considered i.e. half trench length is to be considered)

Labour charge for excavation of cable trench of 600mm width x

1200mm depth, in any type of soil for laying of cable of size up to

240 mm2 (For additional cable 200 mm additional width shall be

considered i.e. half trench length is to be considered)

Labour charge for excavation of cable trench of 400mm width x

1500mm depth, in any type of soil for laying of cable of size up to

240 mm2 (For additional cable 200 mm additional width shall be

considered i.e. half trench length is to be considered)

Labour charge for laying of 11kV / 22 kV XLPE Cable of size up to

240 mm2 & preparation of sand layer 100mm thick, in the cable

trench & covering the cable with 150 mm dia (Inner), thickness

mm, 1.0 meter long RCC half round muffs and providing and fixing of

4inch width yellow colour polyethylene tape with printing "CAUTION

ELECTRIC CABLE BELOW" at 0.75 m depth from ground surface

after laying cable in trench. This will provide indication that electric

cable is passing underground so as to protect cable from mechnical

injuries, refilling the same, as per Instruction of Engineer in Charge

Labour charge for horizontal drilling using Auger machine without

damage to surface road at max 2.0 mtrs depth & putting of

kg/cm2 , class-4,Green color, 110mm O.D. , 8.5mm thickness

H.D.P.E. pipe confirms to IS 4984-1987(3rd revision) and BIS

certification and laying of 11KV/22KV XLPE cable of size up to

5 9925000005 mm2 in HDPE pipe, as per Site Condition (excluding cost of pipe). Meter

The detail map obtained from HDD machine and excell sheet(hard

and soft copy) indicating the respective depth and distance from

adjacent landmark for each segment for HDD is must required to be

submitted. HDD to be carried out at depth 1.5 mtrs to 2.0 mtrs as per

site conditions and as per instruction of EIC.

Labour charge for horizontal drilling manually without damage to

surface road at max 2.0 mtrs depth & putting of 6.11 kg/cm2 , class-

4,Green color, 110mm O.D. , 8.5mm thickness H.D.P.E. pipe confirms

to IS 4984-1987(3rd revision) and BIS certification and laying of

11KV/22KV XLPE cable of size up to 240 mm2 size, as per Site

Condition (excluding cost of pipe). The detail map and excell

sheet(hard and soft copy) indicating the respective depth and distance

from adjacent landmark for each segment of cable to be submitted.

Drilling to be carried out at depth Minimum 1.2 mtrs to 2.0 mtrs as per

site conditions as per instruction of EIC.

Supply of 6.11kg/cm2 , class-4,Green color, 110mm O.D. , 8.5 mm

7 9925000007 thickness H.D.P.E. pipe confirms to IS 4984 and BIS certification for Meter

laying of underground 11KV / 22KV XLPE cable up to 240 mm2 size.

Labour work for RCC concreting on disputed location and repairing of

damage portion of road crossing for the work carried out for roads

crossing as well as concreting & muffing of ploes including all

materials (1:2:4)

Providing & fixing concrete stone route marker of 300 mm width x

150 mm thick x 650 mm height embedded in earth at least 300 mm

below & 350 mm above ground level respectively at distance approx

50 meters along the length of cable. The RCC concreting (1:2:4)(all

necessary maeterials will be in bidder's scope) of route marker is to be

carried out 300 mm width x 150 mm thick x 300 mm below ground

level as per instruction of EIC. The route marker should be with

name of company with approved yellow colour-DGVCL. The distance

from marker to cable and cable depth with feeder name etc., marked

with arrow sign is to be painted on it.The route marker is to be fixed at

location near to any fixed permanent location (not necessary to fix

exact on top of cable) as per instruction of EIC.

Erection of D.P. (double pole) structure using 9 / 11 Mtr. RSJ pole

with cable connection arrangement along with fitting of necessary

10 9925000010 fabrication for 11KV cable including excavation of pit & refilling of No.

earth as per instruction of EIC. (Exclusive of concreting & muffing of

Erection of Single pole structure using 9 / 11 Mtr RSJ pole with

cable connection arrangement along with fitting ofnecessary

11 9925000011 fabrication for 11KV/22 KV cable including excavation of pit & refilling No.

of earth as per instruction of EIC. (Exclusive of concreting & muffing of

Erection of D.P. (double pole) structure using 8.0 Mtr. PSC pole

with cable connection arrangement along with fitting of necessary

12 9925000012 fabrication for 11KV cable including excavation of pit & refilling of No.

earth as per instruction of EIC. (Exclusive of concreting & muffing of

Erection of Single pole structure using 8.0 Mtr PSC pole with cable

connection arrangement along with fitting ofnecessary fabrication for

11KV/22 KV cable including excavation of pit & refilling of earth as per

instruction of EIC. (Exclusive of concreting & muffing of poles)

Labour charge for erecting of 11kV / 22 kV XLPE cable of size up to

14 9925000014 240 mm on DP Structure with fixing of 02 Nos polymer cleats on Per Job

top and middle part.Polymer cleats, nut bolts etc. fixing material to

be provided by contractor.

Providing & fixing of 6.11kg/cm2 , class-4,Green color, 110mm O.D.

, 8.5mm thickness H.D.P.E. pipe confirms to IS 4984 and BIS

certification on the erected DP structure for the mechanical

protection of cable by inserting the cable inside HDPE pipe. The

HDPE pipe shall be erected in such a way that 300mm shall be below

the ground level and the rest 2700 mm shall be supported on the

DP Structure with 01 No Polymer cleat.All materials including polymer

cleat and Nut bolt to be provided by contractor.

Providing and fixing of pipe type earthing from 80 mm dia class-B GI

pipe with pit to be filled with salt & coke and construction of chamber

16 9925000016 as per DGVCL Drg. No. dg /100 for DP and cable. The earthing pit No.

should be joined with cable by G.I. strip of size 1” width & 2 mm thick.

All material GI pipe, Coke, Salt etc will be supplied by bidder.

Supply & fixing of heat shrink type end terminations (outdoor) for

17 9925000017 upto 11kV 3C x 185 mm2 size XLPE cable as per DGVCL technical No.

Supply & fixing of heat & shrinkable end terminations (outdoor) for

18 9925000018 upto 22 kV 3C x 185 mm2 size XLPE cable as per DGVCL technical No.

Supply & fixing of heat shrink type end terminations (indoor) for

19 9925000019 upto 11kV 3C x 185 mm2 size XLPE cable as per DGVCL technical No.

Supply & fixing of heat & shrinkable end terminations (indoor) for

20 9925000020 upto 22 kV 3C x 185 mm2 size XLPE cable as per DGVCL technical No.

Supply & fixing of heat shrinkable straight through joint for upto

21 9925000021 11kV 3C x 185 mm2 size XLPE cableas per DGVCL technical No.

Supply & fixing of heat shrinkable straight through joint type for

22 9925000022 upto 22kV 3C x 185 mm2 size XLPE cable as per DGVCL technical No.

Labour charge for excavation of 2100mm long x 1200mm wide x

1200 mm deep joint pits for installation of 11kV / 22kV Straight

23 9925000023 through joints as per instruction of engineer-in-charge & covering the No.

cable with 150 mm dia (Outer), thickness 25 mm, 1.0 meter long

RCC half round muffs & refilling same as per instruction of EIC .

Providing and fixing of insulating bus bar, made from 11KV/22KV

XLPE cable after removal of semi conducting layer and applying of

PVC heat shrinkable anti-tracking core insulating tubing (1.1KV), on

both end terminal using Aluminium long barrel heavy duty up to

24 9925000024 sq mm lugs, Aluminium bus connector. Taping with PG- clamp for bus No.

conductor as per drawing and as per instruction of EIC. The

Alluminium lugs and PG clamp shall be covered with 11KV/22KV HT

insulating tapes.(11KV/22KV XLPE cable will be in scope of DGVCL

while all other materials will be in bidder's scope)

Testing of cable at various points and commissioning the feeder as

25 9925000025 per instruction of engineer-in-charge.Test result shall be submitted by No.

contractor with bill.

Preparation and submission of 6 (six) copies, of complete layout

26 9925000026 drawings with GIS mapping as per actual cable routing showing Set

road crossing, HDPE pipe sleeving, jointing locations, markers etc.

Providing and fixing of Sign Board at junction point Made out of 2 mm

aluminium sheet size 750x300 mm (2.5 x 1ft) rectangle, as per design,

pre treated with phosphate process and acid etching coated with one

coat of epoxy primer and two coats of best quality paints,

refloctrorised with Hi-Intensity retro – reflective sheeting as per the

latest and frame fabricated from suitable size iron angle. The Sign

Board is to be fixed on the base prepared from channel and bracing

angles which is grouted by means of cement concreting of 1:2:4 for

size of 300 mm dia x 800 mm height (500 mm to be grouted in

ground). The details to be displayed on sign board will be given by In-

charge Engineer.

(a) Hi intensity Micro prismatic Grade

Providing and fixing of Sign Board (Danger Board) on Distribution

Transformer Centers

Made out of 2mm aluminium sheet size 300x300mm (1x1ft) as per

design, pre treated with phosphate process and acid etching coated

with one coat of epoxy primer and two coats of best quality paints,

refloctrorised with Hi-Intensity retro-reflective sheeting as per the

latest and frame fabricated from suitable size iron angle. The Sign

Board (Danger Board is to be fixed at the location as per instruction of

In-charge Engineer.

(a) Hi intensity Micro prismatic Grade

Providing & fixing of aluminium tag of size 250 mm (L) x 75 mm (W)

from 3 mm aluminium sheet along with 1.0 mm dia aluminium binding

wire for fixing of aluminium tag near end termination joint at DP

structure for identifyng the cable. The details of feeder i.e. 11 / 22 KV

with feeder name shound be punched on the tag by letter punch of

size 16 mm as per instruction of In-charge Engineer.

Supply & fixing of heat shrink type end terminations (outdoor) for

30 9925000030 11kV 3C x 240 mm2 size XLPE cable as per DGVCL technical No.

Supply & fixing of heat & shrinkable end terminations (outdoor) for

31 9925000031 22 kV 3C x 240 mm2 size XLPE cable as per DGVCL technical No.

Supply & fixing of heat shrink type end terminations (indoor) for

32 9925000032 11kV 3C x 240 mm2 size XLPE cable as per DGVCL technical No.

Supply & fixing of heat & shrinkable end terminations (indoor) for

33 9925000033 kV 3C x 240 mm2 size XLPE cable as per DGVCL technical No.

Supply & fixing of heat shrinkable straight through joint for 11kV 3C

x 240 mm2 size XLPE cableas per DGVCL technical specification.

Supply & fixing of heat shrinkable straight through joint type for

35 9925000035 22kV 3C x 240 mm2 size XLPE cable as per DGVCL technical No.

Installation, Testing and commissioning of 11 KV,630 A SCADA

Compatible, RRL type- 3 Way RMU including Two numbers of

earthings as per Drawing (material is in bidder's scope) and as per

DGVCL Technical specification.

Installation, Testing and commissioning of 11 KV,630 A SCADA

Compatible, RRLL type- 4 Way RMU including Two numbers of

earthings as per Drawing (material is in bidder's scope) and as per

DGVCL Technical specification.

Installation, Testing and commissioning of 22KV,630 A SCADA

Compatible, RRL type-3 Way, RMU including Two numbers of

earthings as per Drawing (material is in bidder's scope) and as per

DGVCL Technical specification.

Installation, Testing and commissioning of 22KV,630 A SCADA

Compatible, RRLL type-4 Way, RMU including Two numbers of

earthings as per Drawing (material is in bidder's scope) and as per

DGVCL Technical specification.

Construction of plinth for 11KV, RRL type- 3 Way (i.e Two

numbers of Isolator & One number of Breaker) Ring Main Unit as per

DGVCL's technical specification mentioned in drawing no: Drg. 11kv-

01. All required material will be supplied by contractor.

Construction of plinth for 11KV, RRLL type- 4 Way (i.e Two

numbers of Isolator & Two number of Breaker)Ring Main Unit as per

DGVCL's technical specification mentioned in drawing no:Drg. 11kv-

02.All required material will be supplied by contractor.

Construction of plinth for 22KV, RRL type- 3 Way (i.e Two

numbers of Isolator & One number of Breaker) Ring Main Unit as per

DGVCL's technical specification mentioned in drawing no: Drg. 22kv-

01. All required material will be supplied by contractor.

Construction of plinth for 22KV, RRLL type- 4 Way (i.e Two

numbers of Isolator & Two number of Breaker)Ring Main Unit as per

DGVCL's technical specification mentioned in drawing no:Drg. 22kv-

02.All required material will be supplied by contractor.

Modifications e.g.Providing and fixing of Terminal protectors i.e. Re-

use able boot (HT Side 11/22KV, LT Side 1.1KV) including 11/22 KV

insulating taps and L.T.(1.1 KV) insulating taps ,Busbar, Tapping

from Bus Bar (11/22 KV XLPE cable) through P.G. Clamp for H.T.

Jumper to D.O. Fuse to bushings of Transformer Center, providing &

Fixing of jumper and providing & fixing of Heat Shrinkable Anti

Tracking Core Insulating Tubing (Insulation Level 11/22 KV) in H.T.

jumper , Clamping arrangement of cable support frame on both side of

44 9925000046 existing Over Head type Distribution Transformer to utilize in Under No.

Ground cable network as per drawing & as per instruction of Engineer

incharge. All live parts i.e. PG-Clamp, connections of D.O.fuses, HT

bushings etc . shall be covered with fixinng of 11/22 KV HT insulating

tapes. ( 11/22 KV XLPE cable will be in scope of DGVCL while all

other materials will be in bidder's scope ) .

Laying of any size of 11/ 22 KV XLPE /PILC Cable in redaymade Per Cable

trench or in open space Per Mtr

46 9925000060 Labour charges for Lying of O/H XLPE cable pole to pole KM

Supply of 150 mm dia (Inner), thickness 25 mm, 1.0 meter long RCC

half round pipe

In Words : - Thirty Lakh Rupees Only

% Above/Below of Estimate Amount

Stamp & Sign of Contractor

Executive Engineer (O&M)

DGVCL, Rander Division