ADDN/ALTN TO GATE AND CATTLE FENCING IN CERTAIN OFFRS QTRS IN DOE AREA AND PROVISION OF CERTAIN REVENUE WORKS AT MILITARY STATION KOTA

Amount

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.

M&L for RCC 1:1.5:3 type A-1 (using 20 mm graded crushed stone aggregate), as in columns, pillars, piers, posts and struts etc, complete all as specified and directed.

Formwork (rough finished surfaces) to sides of columns, pillars, piers, posts, struts and stanchions etc complete all as specified and directed.

M&L mild steel TMT bars, 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

~Ditto~ but 5 to 10 mm dia mild steel TMT bars as in stirrups, spacers and binders etc complete all as specified and directed.

Dismantling mild steel work of any description not otherwise provided for, complete all as specified and directed.

M&L for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, conforming to Fe 410 -W (GdeE- 250) quality A, complete all as specified and directed.

M&L PCC 1:4:8 type D-2, using 40 mm graded stone aggregate, as in foundation, filling, mass concreting etc, complete all as specified and directed.

M&L brick work with pulverized fuel Ash-lime bricks (Fly ash bricks - non modular size), straight or curved on plan exc 6 m mean radius, built in CM 1:6, complete all as specified and directed.

M&L brick work (Except bricks), straight or curved on plan exc 6 m mean radius, built in CM 1:6, complete all as specified and directed. (Serviceable bricks obtained from demolition shall be reused under this item).

Taking down cement plaster of any description and thickness on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick/concrete surfaces in CM 1:4, finishing surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for applying two coats of cement based paint over a coat of primer on newly plastered surfaces of walls including preparation of surfaces, complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.50 Cum, getting out, returning filling in and ramming earth in layers not exceeding 25 cm,watering and removing surplus soil to a distance of n exc 50m and making good surface in soft/loose soil, complete all as specified and directed.

M&L PCC 1:3:6 type C-2, using 40 mm graded stone aggregate, as in foundation, filling, mass concreting etc., complete all as specified and directed.

M&L for rolled mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standard rails, straining bolts etc, including provision of binding wire, complete all as specified and directed.

Supply only Chain link MS galvanised fencing, any size or type, complete all as specified and directed.

M&L PCC 1:2:4 type B-2, using 40 mm graded stone aggregate, as in foundation, filling, mass concreting etc., complete all as specified and directed.

Formwork (rough finished surfaces) to sides of concrete foundations, column footings, bases of columns, sides and soffits of plinth beams or other similar works, vertical or to batter for rough finished surfaces complete all as specified and directed.

S&F Mild steel round bars, 10 mm dia and over, cut to length, bent to shape and provided as support to chain link fencing including necessary welding, riveting etc, complete all as specified and directed.

S&F 11 to 15 mm dia MS screw bolts (Purpose made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, length of bolt exc 15 cm and not exc 22.50 cm, complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer, complete all as specified and directed.

M&L applying 2 coats of synthetic enamel paint over a coat or red oxide zinc chromate primer on steel/iron work not exceeding 10 cm in width or girth, when unconnected with other painting or when painted in different tint, incl preparation of the new surfaces, complete all as specified and directed.

M&L for preparing surfaces of steel and iron works such as hold fasts or other similar small articles of area n exc 0.10 Sqm each and treated with tar or coal tar black paint, complete all as specified and directed., complete all as specified and directed.

Supply, fabrication and fixing MS tubes, medium grade with connecting plates as in posts and struts including cutting to shape, necessary welding, nuts, bolts, washers etc, complete all as specified and directed.

Supply, fabrication and fixing MS tubes, medium grade with connecting plates as in framed truss, purlin, rafter etc including cutting to shape, provided with necessary nuts, bolts, washers, welding etc, complete all as specified and directed.

S&F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m deep for foundation etc or for shafts, column footings or for laying cables etc not exc 10 Sqm on plan and getting out in soft/loose soil, complete all as specified and directed.

Returning filling in soil including spreading, leveling, watering and well ramming in layers not exc 25 Cm, complete all as specified and directed.

Removing excavated materials (soil) not exc 50 m distance and depositing where directed at a level not exc 1.5 m above starting point complete all as specified and directed.

M&L applying three coats of white wash after preparation of new plastered surfaces of walls, complete all as specified and directed.

M&L for light coloured vitrified tiles, 10mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 mix, type B1 (Using 20mm graded stone agg) as in floors, finishing surfaces even and smooth with using extra cement, complete all as specified and directed.

Supply only glass dividing strips 3 mm thick and 38 mm wide, fixed in position to conform to design, complete all as specified and directed. (Cost of fixing dividing strips shall be deemed included in the unit rates of PCC flooring)

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) 100 mm thick as in sub base, finishing the surface even & rough to receive topping layer, complete all as specified and directed.

M&L Moorum or red bajri filling in floor or paving, laid in layers not exceeding 15 Cm thick, spread, leveled and rammed including watering, complete all as specified and directed.

M&L hardcore (broken stone) of gauge not exc 63 mm, deposited spread and leveled in layers not exc 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L chequered cement concrete tiles of size 30 cm x 30 cm, 24-25 mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments as in floors, laid over and including 15 mm thick screed in CM 1:6, complete all as specified and directed.

M&L walling of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6, complete all as specified and directed.

M&L walling of random rubble (Except stone), uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6, complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses, with maximum depression on face from straight edge held against the dressed surface not exceeding 40 mm; to block in course masonry (Lime or sand stone), complete all as specified and directed.

M&L for 15 mm thick rendering on stone masonry surfaces or other than fair faces of brick work in CM 1:4, finishing surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L Providing cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in surface channel and drains, complete all as specified and directed.

a) Extra for forming fair finished drain or channel 30 cm inner girths in cement concrete using extra cement incl forms, moulds, mitered/stopped ends etc, complete all as specified and directed.

b) Add to or deduct therefrom for each additional 25 mm girth or part thereof.

M&L 450 mm bore Reinforced concrete pipes, class NP-3, laid and jointed complete with collars including demolition of existing RCC pipe, complete all as specified and directed.

M&L for Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less, complete all as specified and directed.

M&L for galvanised, 2 strand steel barbed wire 2.24 mm dia, barbed with 2.00 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rail, straining bolts, incl securing or tying at crossing with and provision of galvanised MS wire, staples or steel pins etc, complete all as specified and directed. (each line wire to be measured).

S&F 11 to 15 mm dia MS screw bolts (Purpose made ) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, length of bolt exc 10 cm but not exc 15 cm long, complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) 75 mm thick as in sub base, finishing the surface even & rough to receive topping layer, complete all as specified and directed.

M&L for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) as in flooring/sub base finished rough to receive floor finishes/screed complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate), 50 mm thick as in plinth protection/Path/PCC paving etc including finishing the surface even & smooth without using extra cement, with and including all necessary formwork to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints throughout the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three parts of fine sand by weight), complete all as specified & directed.

S&F steel windows/ventilators with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, including one shop coat of zinc chromate primer, complete all as specified and directed.

S&F mild steel framed work as in grills, grating etc. with end of bars shouldered and/or riveted, or forged into spikes: framed guard bars: barred iron doors: ladders: frame balusters: walk ways: railing: frame work of water tanks and similar works conforming to Fe-290 Grade-E-165, complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L Glazed ceramic coloured tiles on vertical surfaces 350x 250x7 mm/450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including 10 mm thick rendering in CM 1:4, complete all as specified and directed.

M&L for brick work with pulverised fuel Ash-lime bricks (Fly ash bricks - non modular size), straight or curved on plan to any radius in half brick walls built in cement mortar 1:4, complete all as specified and directed.

M&L rendering 10 mm thick in CM 1:4 on concrete surfaces of ceiling, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 15 mm thick rendering on other than fair faces of brick work or stone masonry surfaces in two layers, consisting of 10 mm thick in CM 1:6 and over that 5 mm thick in Cm 1:4 using water proofing compound as per manufacturer's instruction's, finishing surfaces even and smooth without using extra cement complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

Supply only approved integral water proofing compound (Powder), complete all as specified and directed.

M&L for 15 mm thick rendering on stone masonry surfaces or other than fair faces of brick work in CM 1:6, finishing surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for applying three coats of white wash on ceiling including preparation of new or previously untreated surfaces, complete all as specified and directed.

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

S&F in position rotational moulded polyethylene water storage tanks 1000 Litre capacity (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified in SSR Part I and as directed.

S&F bib taps, cast copper alloy, with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket, complete all as specified and directed.

S&F bib taps, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket, complete all as specified and directed.

S&F 20 mm dia ball brass valve, high pressure with polythene float and fly nut, screwed down for iron pipe, complete all as specified and directed.

S&F 15 mm dia stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for union, complete all as specified and directed.

S&F 75 mm dia cast iron pipe soil, waste & vent pipes, with or without ears, in any length, with cement joints, laid in trenches or under floors, complete all as specified and directed.

S&F 75 mm cast iron bends, any radius with diminishing pieces or tapers (larger bore measured), complete all as specified and directed.

S&F 75 mm dia branch pieces, single (Equal/unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F PVC connection, 15 mm size with two PTMT nuts, length of connection 450 mm, complete all as specified and directed. (Make - India Prayag/Polytuf)

S&F PVC connection, 15 mm size with two PTMT nuts, length of connection 450 mm, suitable for hot water supply, complete all as specified and directed. (Make - India Prayag/Polytuf)

S&F vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest incl providing lime concrete bedding and connecting to flusing cistern, complete all as specified and directed.

S&F 10 Ltr vitreous china valveless syphonic action type flushing cistern, low level, coloured with inlet, ball valve, float and handle incl PVC flush pipe of 32 mm dia, fixed to wall, complete all as specified and directed.

Use and waste of formwork for fair finished surfaces to soffits of suspended slab such as roof slabs, floor slabs, landing and similar works, not exceeding 200mm thick, complete all as specified and directed.

M&L for RCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns, in floors, roofs, landing balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

S&F vitreous china half stall type urinal, white with grating and union for discharge pipe, including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back with white cement, including providing 32 mm bore PVC waste pipe, complete all as specified and directed.

M&L for 150 mm dia salt glazed stoneware drain pipes, laid in trenches and jointed in cement sand slurry in 1:1, complete all as specified and directed.

M&L PCC 1:4:8, type D-2 using 40 mm graded stone aggregate, as in concrete bed to drain pipes including packing under and haunching against the sides of 150 mm dia pipe, after they are laid and tested, complete all as specified and directed.

S&F salt glazed stone ware gully traps, square or round mouthed, type 'P', size 150x150 mm, with and including bedding in PCC 1:5:10 type E1 using 20 mm graded stone aggregate, complete all as specified and directed.

Excavation over areas not exc 1.5 m deep and getting out in soft/loose soil, complete all as specified and directed.

Excavation over areas exc 1.5 m but not exc 3.0 m deep and getting out in soft/loose soil, complete all as specified and directed.

M&L Walling of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work, complete all as specified and directed.

M&L cutting existing manholes for connecting new drain (for 150 mm bore pipe), making good to pipe and rendering, cutting out existing benching for forming branch channel (half round or 3/4 section) in cement concrete 1:2:4 type B-1 or smooth finishing, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and and in any position not otherwise specifically provided for and removing rubbish from premises, complete all as specified and directed.

M&L for machine cut kota stone slab as in flooring 17 to 22 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for machine cut kota stone slab as in skirting, dado, risers etc, 17 to 22 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing, laid over and including 10 mm thick CM 1:4 backing, complete all as specified and directed.

M&L for rolled mild steel work as in joist, channels, angle or Tee section fixed independently without connecting plates etc, cut to ordinary length ie 20 mm of the length indicated, conforming to Fe-290 (Gde E-165), complete all as specified and directed.

M&L for rolled Mild Steel work in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rail and guides for sliding doors, fixing with angle cleats or other connecting pieces, conforming to Fe 410-W (Gde - E-250) quality-A, complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size made with grey cement and pigment, confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, laid over and including 25 mm thick sand cushion, complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each, complete all as specified and directed.

S&F 35mm thick factory made IInd Class Hard wood (Hollock) paneled door shutters single panel with lock rail and panel of 9mm B.W.P. marine grade plywood bonded with high quality liquid phenol formaldehyde synthetic resin adhesive conforming to IS-710 or 12mm thick particle board veneered with commercial veneering on both faces. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401, complete all as specified and directed.

S&F 35mm thick factory made IInd Class Hard wood (Hollock) glazed and skeleton, open rebated, prepared to receive glass, gauge etc, without sash bars, edges of framing plain, chamfered and rounded, fitted with cut and mitered beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.

S&F 150 mm mild steel barrel tower bolts, stove enameled black with bright bolts and fixed complete all as specified and directed.

S&F 100 mm long mild steel cold rolled med weight butt hinges, fixed with MS screws, complete all as specified and directed.

S&F 300 mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

S&F Mild Steel bow handles, oval type, stove enameled black 150 mm long, complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolt clip type stove enameled black with bright bolt n.less then 12 mm dia and incl a minimium of 6 bolt & nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat or pink primer on wooden surfaces not exc 10 cm width or girth incl preparation of the new surfaces, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises, complete all as specified and directed.

Taking up or down existing GI tubing and connections, including making good the disturbed surface for 15 mm dia pipes, complete all as specified and directed.

Taking up or down existing GI tubing and connections, including making good the disturbed surface for 20mm dia pipes, complete all as specified and directed.

Dismantling water storage tank of any description of capacity exc. 500 ltr but n.exc. 1000 ltr, complete all as specified and directed.

S&F vitreous china wash hand basin flat back 550 x 400 mm excluding tap but including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe with connector, brackets 2 numbers including cutting for and pinning in ends of brackets, complete all as specified and directed.

S&F pillar taps, cast copper alloy, with capston heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed, complete all as specified and directed.

S&F grating doom of 140 mm dia (Minimum weight 50 grams), made of PTMT, with or without waste hole, complete all as specified and directed.

M&L granite slab 16-18 mm thick, table rubbed and polished in cooking platform, plateform for WHB, steps, jambs, window cills, pillars etc and the like including bull nosing to exposed edges, set over and including 10 mm thick CM 1:4 bedding and pointing in white cement mixed with pigment, complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) for 15 mm dia pipes with and including all new GI pipe fittings, complete all as specified and directed.

S&F in repair two way angle valve, fancy type, chromium plated brass, screwed both ends to iron pipe or union of dia 15 mm, complete all as specified and directed. Make: Jaquar cat part No. 041KN or equivalent in Hindware/Plumber

S&F in repair angle valve, fancy type, chromium plated brass, screwed both ends to iron pipe or union of dia 15 mm, complete all as specified and directed. Make: Jaquar cat part No. 053KN or equivalent in Hindware/Plumber.

S&F angle valve, fancy type, chromium plated brass, screwed both ends to iron pipe or union of dia 15 mm, complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan, pedestal type, white, including recessed bottom PVC seat cover of white colour and mild steel chromium plated hinging device but excluding flushing cistern, flush pipe and fixing bolt and making connections to drain or outgoing pipe and to flushing pipe, anti-syphonage pipe etc, fixed in repairs, complete all as specified and directed. (Make: Jaquar cat part No. 15851SN or equivalent in RAK/Roca)

S&F in repair vitreous china wash hand basin, white oval type, fixed on granite platform, excluding chain and plug, taps and porcelain stopper but incl PVC waste pipe of 32 mm bore, complete all as specified and directed. (Make - Jaquar cat part No. 705 or equivalent in RAK/Roca)

S&F PVC connection, 15 mm size with two CP brass nuts, length of connection 450 mm, complete all as specified and directed. (Make - Jaquar cat Part No. ALD 805B)

S&F in repair towel rack of CP brass, fixed with and including CP brass screws and wooden/plastic cleats, complete all as specified and directed. Make: Jaquar cat part No. 35781P

S&F in repair shower rose, chromium plated brass, fancy type, screwed to iron pipe or for union of 15 mm dia, complete all as specified and directed. (Make: Jaquar cat part No. 35497)

S&F in repair 15 mm bore CP brass wall mixer for mixing hot and cold water with two CP brass wall flange, screwed down for iron pipe and fixed, complete all as specified. Make - Jaquar, Cat Part No. 273KNUPR

S&F 15 mm bore CP brass centre hole basin mixer for mixing hot and cold water, screwed down for iron pipe and fixed, complete all as specified. Make - Jaquar, Cat Part No. 169KNB

S&F bottle trap (with integral partition), 32 mm size with 300 mm and 190 mm long wall connection pipes and wall flange, complete all as specified and directed. Make - Jaquar, Cat Part No. ALD 769L300x190

S&F in repair waste coupling 32 mm size full threaded with 130 mm height, complete all as specified and directed. Make - Jaquar, Cat Part No. ALD 705L130

S&F health faucet with 1 mtr long easy flex tube in chrome finish and wall hook, complete all as specified and directed. Make - Jaquar, Cat Part No. ALD 565

S&F hand shower 32 mm round shape straight design dual flow with 1 mtr long easy flex tube in chrome finish and wall hook (ABS body and face plate chromium plated) with rubit cleaning system, complete all as specified and directed. Make - Jaquar, Cat Part No. HSH5541

S&F in repair shower arm straight 20 mm dia and 450 mm long round shape without bend for wall mounted shower with flange, complete all as specified and directed. Make - Jaquar, Cat Part No. SHA49483

S&F chromium plated toilet paper holder, complete all as specified and directed. Make - Jaquar, Cat Part No. AKP 35755P

S&F chromium plated towel ring, complete all as specified and directed. Make - Jaquar, Cat Part No. AQN 7721

S&F liquid soap dispenser with glass bottle, complete all as specified and directed. Make - Jaquar, Cat Part No. AKP 35735P

S&F stainless steel soap dish, complete all as specified and directed. Make - Jaquar, Cat Part No. AQN 7731

S&F in repairs 19 mm thick modular membrane kitchen cabinet door shutters (made out of MDF boards) in wood grain colour and half round edges, complete all as specified and directed.

S&F in repairs ball catches with 8 mm dia steel ball and brass body andf striking plate including letting in and fixed, complete all as specified and dirceted.

S&F in repairs auto close hinges, stainless steel, bright finish or electro galvanised, complete all as specified and directed.

M&L for 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work in repairs, complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) floor trap, with CP grating including jointing to waste pipe with solvent cement and fixed in cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate), complete all as specified and directed.

M&L complete removal of existing treatment from previously treated surfaces of walls and applying 1 to 1.5 mm thick Wall care putty as per manufacturer's instructions and over it applying two coats of distemper oil emulsion over a coat of primer, complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed.

S&F in repairs PTMT alloy toilet cabinet with mirror of overall size 350x450 mm and fixed to wall complete all as specified and directed, complete all as specified and directed. Make - India Prayag cat part No. 551

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for reuse or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Dismantling unserviceable main switch/DBs incl wooden board and deposit to MES store yard including making good disturbed surface of wall complete all as specified and directed.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed surfaces to match with the existing surface, complete all as specified and directed.

M&L for Point wiring with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable of size 1.5 Sqmm with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable of size 1.5 Sqmm as earth continuity wire to be drawn in and including PVC casing caping not less then 20 mm width fixed on surface including making good disturbed, complete surface all as specified and directed for the following: - One light/ceiling fan/exhaust fan/bell buzzer point controlled by one, one way switch of 5/6 Amps.

One 3 pin 5 Amp socket outlet point on the same board with other switches.

One 3 pin 5 amps socket outlet point on independent board.

M&L Point wiring with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable of size 2.5 Sqmm, with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable FRLS of size 2.5 Sqmm as earth continuity wire to be drawn in and including PVC casing caping not less than 20 mm width fixed on surface for one socket outlet 15 amp on independent board including making good disturbed surfaces, complete all as directed and specified.

S&F switch piano flush type 5/6 Amps, 230 volts, single pole, one way, ISI marked, complete all as specified & directed.

Supply and fixing switch socket combination, 5/6 and 15/16 Amps, 230 volt, multi pin, flush type universal, complete all as specified and directed.

Supply and fixing switch socket combination, 5/6 Amps, 230 volt, multi pin, flush type universal, complete all as specified and directed.

Supply and fixing socket outlet, 5/6 Amps, 230 volt, multi pin, flush type universal, complete all as specified and directed.

S&F stepped type electronic fan regulator, flush type, 230 volts AC, single pole, humming free, fixed on the existing phenolic laminated sheet, complete all as specified and directed.

S&F ceiling rose surface type PVC/Polycarbonate isolated body, 65x 20mm, 3 terminals, complete all as specified & directed.

S&F LED Tube light fittings, batten type with bipin holders, powder coated steel with retrofit 20 watt LED tube, internally prewired, complete all as specified and directed.

S&F PVC/polycarbonate lamp holder, angular/batten type with back plate, complete all as specified & directed.

S&F MCB, 6 to 32 Amps, Single Pole, 240 Volt, 10 KA 'B' series including all accessories, complete all as specified and directed.

S&F MCB, 6 to 32 Amps, Single Pole & Neutral, 240 Volt, 10 KA 'B' series including all accessories, complete all as specified and directed.

S&F MCB, 20 Amps, Single Pole & Neutral, 240 Volt, 10 KA 'B' series including all accessories, complete all as specified and directed.

S&F MCB, 40 Amps, Triple Pole & Neutral, 415 Volt, 16 KA 'B' series including all accessories, complete all as specified and directed.

S & F MCCB 4 Pole, 415 V with adjustable thermal and adjustable magnetic settings, 63 Amps, breaking capacity 16 KA, complete all as specified and directed.

M&L for MCB DB made of sheet steel phosphatised, powder painted with bus bar 200 A, neutral link, earth bar and Din rail, 415 Volts TPN with 4 ways, Double door, complete all as specified and directed.

M&L for MCB DB made of sheet steel phosphatised, powder painted with bus bar 200 A, neutral link, earth bar and Din rail, 240 Volts SPN with 8 ways, Double door, complete all as specified and directed.

S&F double door MCCB DB, verticle type, made of sheet steel phosphatised powder painted, with neutral bus bar 200 Amps, neutral link, IP-43, IK-09 protection grade, 415 volts TPN, 4 way, complete all as specified and directed. Note for items of MCB/MCCB DB's: - (1) The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall. (2) The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface.

S&F of sub main wiring with two runs of single core PVC insulated and unsheathed FRLS multi-stranded copper conductor cable of size 4 Sqmm LT, 1100 volts grade, drawn through and including minimum 20 mm wide PVC non metallic surface casing/capping with all accessories and fittings and one run of 4 sqmm single core multi-stranded FRLS copper conductor cable green colour as earth continuity conductor complete all as specified & as directed.

S&F of sub main wiring with two runs of single core PVC insulated and unsheathed FRLS multi-stranded copper conductor cable of size 6 Sqmm LT, 1100 volts grade, drawn through and including minimum 20 mm wide PVC non metallic surface casing/caping with all accessories and fittings and one run of 6 sqmm single core multi-stranded FRLS copper conductor cable green colour as earth continuity conductor complete all as specified & as directed. NOTES for sub main wiring:- (i) Two runs of cable one run of earth wire and one run of PVC non metallic casing/capping shall be measured as one run length. Cost of cable required for connection to DBs shall deemed to be included and shall not be measured separately. Earth wire shall run inside the PVC casing/caping.

Disconnecting and taking down carefully ceiling fan/exhaust fan and refixing the same after rewiring work, complete all as specified and directed.

M&L for Earthing with galvanized steel earth plate electrode of size 600 mm x 600mm x 6.0 mm, buried directly in ground (earth plate not less than 2.25 Mtr below normal ground level) connected to galvanized earth lead of size 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron on steel including 15 mm dia light grade GI tubing for protection of earth lead, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm dia, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type 75 mm thick precast RCC (1:2:4) type B1 pit cover reinforced with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar including GI strip of size 25 mm x 3 mm for extension of earth lead and necessary excavation, earth work, in soft/loose soil and disposal of spolis to a distance not exc 50 Mtr and necessary connection and testing complete all as shown in electrical plate No. 3 and complete all as specified and directed. Notes: - (a) Irrespective of whatever is shown in plate No 5 of SSR, earth pit shall be casted in PCC (1:3:6) type C-1 and precast cover of RCC (1:2:4) type B-1 with suitable handle. (b) Item includes the cost of GI pipe for protection of earth wire/strip and earth strip upto 7.5 m. Any variation below or above shall be measured and paid for separately under relevant item of this Sch ‘A’.

Supply, Laying, jointing and testing of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable, heavy duty, with 25 Sqmm, 4 core aluminium conductor, 1100 Volts grade, complete all as specified and directed.

Supply, Laying, jointing and testing of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable, heavy duty, with 50 Sqmm, 3.5 core aluminium conductor, 1100 Volts grade, complete all as specified and directed.

Supply, Laying, jointing and testing of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable, heavy duty, with 25 Sqmm, 3.5 core aluminium conductor, 1100 Volts grade, complete all as specified and directed.

M&L for dry and fine river sand free from sharp material as in cushioning to cable in trenches for cable protection including necessary punning and consolidation as required complete all as specified and as directed. (Depth of sand shall be measured after punning).

Supplying and laying pulverized fuel Ash-lime bricks (Fly ash bricks - non modular size), laid flat adjoining each other as in protection to UG cables, complete all as specified and directed.

S&F PVC rectangular block for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover of size 100x100 mm and 50 mm deep, complete all as specified and directed.

All as per item 174 above but of size 175x100 mm and 50 mm deep, complete all as specified and directed.

All as per item 174 above but of size 200x150 mm and 50 mm deep, complete all as specified and directed.

All as per item 174 above but of size 250x200 mm and 50 mm deep, complete all as specified and directed.

S&F Tubes "light grade" galvanised iron of 40 mm bore, laid under roads/drain, fixed to poles, walls, with flat iron clamps, bolts/ nuts/ washers etc, complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc., laid in trenches, complete all as specified and directed.

S&F gun metal globe or gate valve of size 20 mm dia with iron wheel head screwed both ends and for iron pipe & fixed complete all as specified and directed.

Cutting existing 20 mm bore steel tubing for alterations or additions and screwing the same for alterations or additions (each cut measured) and making connection with GI Tee, complete all as specified and directed.

Supply and fix onload change over switch, 415 volts, 4 pole, 63 Amps capacity, complete all as specified and directed.

S & F of BEE 5 star rated Electric Water heater storage type (Geyser), Glassline coated tank for protection against corrosion for longer life of heating element With 4-in-1 multipurpose valve for safety, temperature indicator dial, fire retardant cable Neon indicators for 'Power on' & 'heating' functions supplied and installed complete capacity 25 litres storage water heater after grouting 4 Nos new bolts of required size at new/same distance in wall and tightening with nuts & washers incl extending/modifying/altering 15mm bore GI pipe line with tee, union, socket, nipple etc suitable for 15mm bore GI pipe as and where required complete connecting with chromium plated pipe (for hot water supply) and PVC flexible pipe (for cold water supply) fixed with brass check nuts & PVC flexible pipe (for cold water supply) fixed with brass check nuts & PVC washers at both ends, complete all as specified & directed.

Supply, installing, commissioning & testing of trolley mounted diesel engine driven dewatering pump set suitable for head not less than 12 mtrs and discharge not less than 24 LPS including Diesel Engine of suitable capacity (not less than 10 HP) to drive the pump set and base frame including suitable trolley to move the pump set, complete all as specified and directed.

S&F PVC green hose suction and delivery pipe line of size 100 mm dia including hose nipple, hose clip etc for proper connection to pump set, complete all as specified and directed.

S&F PVC foot valve of size 100 mm dia, provided alongwith suitable clamps of brass to attach the same to PVC hose pipe, complete all as specified and directed.

Aditya Enterprises

L P Singh and Co.

ONKAR ENGINEERS

Pioneer Enterprises

M/S GAURI CONSTRUCTION