Fire Safety System

Name of Work :- Supplying, Installation, Testing & Commissioning of Fire Fighting System

as per NBC-2016 Part-4 Volume-2 at Waghodia Mamlatdar office, Ta. Waghodia,

BILL OF QUANTITIES

It. No. Description of Item Quantity Unit Rate in Total

1 (A) Supplying, installation, testing and commissioning of 1.00 Set 253887.17

Electric Driven Main Fire Pump suitable for automatic

operation and consisting of following, complete in all

respects, as required:

(B) Horizontal type, single Stage, centrifugal, End suction

pump of cast iron & bronze impeller with stainless steel shaft,

Gland Pack conforming to IS

(C) Suitable HP Squirrel cage induction motor, TEFC,

synchronous speed 2900 RPM, suitable for operation on

volts, 3 phase 50 Hz, AC supply with IP 55 protection for

enclosure, horizontal foot mounted type with Class-'F'

insulation, conforming to JS-325.

(D) M.S. fabricated Common base plate, coupling, coupling

guard, foundation bolts etc. as required.

(E) Suitable cement concrete foundation duly plastered with

anti vibration pads.

1620 LPM at 56 m Head

2 (A) Supplying, installation, testing and commissioning of 1.00 Set 456179.13

Diesel Engine Driven Fire Pump suitable for automatic

operation and consisting of following, complete in all

respects, as required: (Diesel Driven Pump)

(B) Horizontal type, Single stage, centrifugal pump of cast of

iron body and bronze impeller with stainless steel shaft,

mechanical seal conforming to IS

(C) Suitable HP, 1500/2300 RPM water cooled with radiator,

diesel engine conforming to relevant IS standard

complete with auto starting mechanism, 12 /24 volts electric

starting equipment, 125 Ltrs diesel tank, exhaust pipe

extended upto 10 m outside pump house duly insulated with

50 mm thick glass wool with 1.0 mm thick aluminium sheet

cladding, residential silencer, instruments and protection as

per standard specification, stop solenoid for auto stop in the

event of fault with audio indications, painted with post office

red colour etc. as required.

(D) M.S fabricated, common base plate, coupling, coupling

guard, foundation bolts etc. as required.

(E) Suitable cement concrete foundation duly plastered and

with anti vibration pads.

1620 LPM at 56 m head

3 (A) Supplying, installation, testing and commissioning of 1.00 Set 73818.20

Electric Driven Pressurisation Pump suitable for automatic

operation and consisting of following, complete in all

respects, as required: (Jockey Pump)

(B) Horizontal type/Vertical Inline type, Single Stage/Multi

Stage, centrifugal End suction pump of cast iron body and

bronze impeller with stainless steel shaft, mechanical seal

conforming to IS:

(C) Suitable HP squirrel cage induction motor TEFC type

suitable for operation on 415 volts, 3 phase 50 Hz AC supply

with IP 55 class of protection for enclosure, horizontal foot

mounted type with Class-'F' insulation, conforming to IS:

(D) M.S. fabricated Common base plate, coupling, coupling

guard, foundation bolts etc. as required.

(E) Suitable cement concrete foundation duly plastered and

with anti vibration pads.

180 LPM at 56 m Head

It. No. Description of Item Quantity Unit Rate in Total

4 Fabrication, Supply, Installation, testing & commissioning of 1.00 No. 146058.84

Electrical Control Panel of cubical construction, floor mounted type,

fabricated out of 2mm thick CRCA sheet, compartmentalised with

hinged lockable doors, dust and vermin proof, powder coated of

approved shade after 7 tank treatment process, cable alley, inter

connection with suitable size copper conductor cable/solid copper

strip, having switchgears and accessories, mountings and internal

wiring, earth terminals, numbering etc. complete in all respect,

suitable for main fire pump. pressurisation pump & diesel pump set

complete as per CPWD specification with following in coming and

Outgoings, suitable for operation on 415V, 3 phase, 50Hz AC

supply with enclosure protection class IP 42 as required: for all

suitable AMP fire pump and Disel Pump in one cubical construction

250A. 50kA 4 Pole MCCB, lcs=100% Icu rating Digital Voltmeter 0-

500 V with selector switch Digital Ammeter (0-250A) with selector

switch & CTs etc. LED type RYB phase indicating lamps, ON, OFF,

trip indicating lamps Set of AL Bus Bar 300A

(Note: All outgoing feeders for pumps should have digital Ammeter

with selector switches, and LED type ON, OFF, trip indicating

MAIN FIRE PUMP (Hydrant & Sprinkler)

125 A, 50kA TPN MCCB, lcs=l00% lcu, with fully automatic

Star/Delta starter suitable for 75 HP pump with overload protection,

current sensing type single phase preventor complete with all

accessories and internal wiring required for automatic operation,

selector switch for local/remote,auto / manual /OFF operation.

Suitable TPN MCCB, lcs=l00% lcu, with fully automatic Star/Delta

starter suitable for 75 HP pump with overload protection, current

sensing type single phase preventor complete with all accessories

and internal wiring required for automatic operation, selector switch

for local/remote, auto/manual/OFF operation.

JOCKEY PUMP (Hydrant & Sprinkler)

63 A, 50kA TPN MCCB, lcs=100% lcu, with suitable HP fully

automatic Star/Delta starter with overload protection, current

sensing type single phase preventor complete with all accessories

and internal wiring required for automatic operation, selector switch

for local/remote, auto / manual / OFF operation.

DIESEL ENGINE CONTROL

Control for diesel engine comprising -Automatic/Manual selector

switch & 3 attempts starting device, timers and relays as required,

push buttons, start/stop in manual mode Indicating lamp for high/

Low Lub. Oil pressure, High Water Temp and Engine on indication

The required built in auto panel suitable for operating with all

electrical component & accessories with necessary parts. The

panel shall be operate for Two Main Electrical Pump, Two Jockey

Pump & One Diesel Pump for Hydrant System & Sprinkler

Automatic System with full requirements and accessories. All Pump

shall as per sufficient requirement for Auto Operation system built

in auto panel. All pump pannel push switch start & automatically all

pumps starts. No Hindrence occured for starting of panel for

starting of all auto pump as directed by Engineer in charge.

5 Supplying and installing following size of perforated Hot 30.00 Mtr. 680.90

Dipped Galvanised Iron cable tray (Galvanisation thickness

not less than 50 microns) with perforation not more than

17.5%, in convenient sections, joined with connectors,

suspended from the ceiling with two numbers GI Suspenders

i/c base of suitable size GI angle, GI bolts & nuts, fastner etc

as required.150 mm width X 50 mm depth X 1.6 mm

6 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 20.00 Mtr. 162.61

cable multistrand Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing trench / pipe of

following size of cables. (F) 3 core 25 Sq. mm - for

Electrical pumps cable

It. No. Description of Item Quantity Unit Rate in Total

7 Supplying and making end termination with brass 10.00 No. 280.05

compression gland and aluminium lugs for following size of

PVC insulated and PVC sheathed / XLPE aluminium

conductor cable of 1.1 KV grade as required. Double

Compression gland for Main Pump 3 X 25 sq. mm (25mm)

8 (a) Supplying, installation, testing and commissioning of 1.00 Set 77444.30

electric driven terrace Booster pump conforming to IS 12469:

2019 suitable for automatic operation and consisting of

following, complete in all respects, as required: (Terrace

(b) Horizontal type,centrifugal pump of cast iron body &

bronze impeller with stainless steel shaft, mechanical seal as

(c)Suitable HP squirell cage induction motor TEFC type

suitable for operation on 415 volts, 3 phase, 50 Hz, AC

supply with IP55 class of protection for enclosure, horiziontal

foot mounted type with Class 'F' insulation, conforming to IS-

(d) M.S.fabricated common base plate, coupling, coupling

guard, foundation bolts etc.as required.

(e) Suitable cement concrete foundation duly plastered and

with anti vibration pads. 450 lpm at 35 m Head

9 Fabrication, Supply, Installation, testing & commissioning of 1.00 No. 65650.00

Electrical Control Panel of cubical construction, floor/Wall

mounted type, fabricated out of 1.6 mm thick CRCA sheet,

hinged lockable doors, dust and vermin proof, powder coated

of approved shade,having switchgears and accessories,

mountings and internal wiring, earth terminals, numbering

etc. complete in all respect, suitable for Terrace Booster

pump complete as per specification with in coming and

Outgoings, suitable for operation on 415V, 3 phase, 50Hz AC

supply with enclosure protection class IP 42 as required in

one cubical construction panel

with fully automatic Star/Delta/ Dual starter suitable for10 HP

pump with overload protection, current sensing type single

phase preventor complete with all accessories and internal

wiring required for automatic operation, pressure switch for

local/remote,auto / manual /OFF operation.

10 Supplying and installing following size of perforated Hot 20.00 Mtr. 680.90

Dipped Galvanised Iron cable tray (Galvanisation thickness

not less than 50 microns) with perforation not more than

17.5%, in convenient sections, joined with connectors,

suspended from the ceiling with two numbers GI Suspenders

i/c base of suitable size GI angle, GI bolts & nuts, fastner etc

as required.150 mm width X 50 mm depth X 1.6 mm

11 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 18.00 Mtr. 107.06

cable multistrand Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing trench / pipe of

following size of cables.

(C) 3 core 6 Sq. mm -For Terrace Booster Pump

12 Supplying and erecting Flexible PVC insulated multi strand 350.00 Mtr. 31.31

multi core 1.1 kv grade ISI marked copper wires of following

size to be erected as directed.

(d) 1.50 Sq.mm 2 core round PVC sheathed

13 Providing and, fixing heavy duty flange type brass cable 20.00 No. 38.38

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for following

size of cables. (B) 2 to 4 core 6 Sq. mm

It. No. Description of Item Quantity Unit Rate in Total

14 Providing, laying, testing & commissioning of 'B' class 30.00 Mtr. 602.69

Medium duty G.l. pipe conforming to IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nuts,

bolts, gaskets etc. and fixing the pipe on the wall ceiling

with suitable clamp/support frame and painting with two

or more coats of synthetic enamel paint of required

shade complete as required 25 mm

15 Providing, laying, testing & commissioning of 'B' class 9.00 Mtr. 1283.20

Medium duty G.l. pipe conforming to IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nuts,

bolts, gaskets etc. and fixing the pipe on the wall ceiling

with suitable clamp/support frame and painting with two

or more coats of synthetic enamel paint of required

shade complete as required. 80 mm

16 Providing, laying, testing & commissioning of 'B' class 128.00 Mtr. 1631.10

Medium duty G.l. pipe conforming to IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nuts,

bolts, gaskets etc. and fixing the pipe on the wall ceiling

with suitable clamp/support frame and painting with two

or more coats of synthetic enamel paint of required

shade complete as required. 100 mm

17 Providing, laying, testing & commissioning of 'B' class 90.00 Mtr. 2230.90

Medium duty G.l. pipe conforming to IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nuts,

bolts, gaskets etc. and fixing the pipe on the wall ceiling

with suitable clamp/support frame and painting with two

or more coats of synthetic enamel paint of required

shade complete as required. 150 mm

18 Providing laying, testing & commissioning of 'B' class 10.00 Mtr. 4325.40

Medium duty GI Pipe conforming to IS 1239/Class -II of

IS: 3589 i/c fittings like elbows, tees, flanges, tapers,

nuts bolts, gaskets etc. in ground including welding &

providing, anticorrosive treatment with coaltar/asphalt

tape as per IS 10221, etc. of following sizes complete

as required. 150mm

19 Supplying, fixing, testing and commissioning of butterfly 1.00 Each 4581.51

valve of PN 1.6 rating with bronze/gunmetal/SS seat

duly ISI marked complete with nuts, bolts, washers,

gaskets conforming to IS: 13095 of following sizes as

required: 80 mm dia

20 Supplying, fixing, testing and commissioning of butterfly 16.00 Each 6162.16

valve of PN 1.6 rating with bronze/gunmetal/SS seat

duly ISI marked complete with nuts, bolts, washers,

gaskets conforming to IS: 13095 of following sizes as

required: 100 mm dia

21 Supplying, fixing, testing and commissioning of butterfly 6.00 Each 8251.97

valve of PN 1.6 rating with bronze/gunmetal/SS seat

duly ISI marked complete with nuts, bolts, washers,

gaskets conforming to IS: 13095 of following sizes as

required: 150 mm dia

22 Providing, installation, testing and commissioning of 4.00 Each 10045.14

non-return valve of following sizes confirming to IS:

5312 complete with rubber gasket, GI bolts, nuts,

washers etc.as required: 100 mm dia

It. No. Description of Item Quantity Unit Rate in Total

23 Providing, installation, testing and commissioning of 2.00 Each 16003.53

non-return valve of following sizes confirming to IS:

5312 complete with rubber gasket, GI bolts, nuts,

washers etc.as required: 150 mm dia

24 Providing, installation, testing and commissioning of 1.00 Each 6160.96

stainless steel Y-strainer fabricated out of 1.6 mm thick

stainless steel, Grade 304, sheet with 3 mm dia holes

with stainless steel flange. 100mm dia

25 Providing, installation, testing and commissioning of 1.00 Each 9900.00

stainless steel Y-strainer fabricated out of 1.6 mm thick

stainless steel, Grade 304, sheet with 3 mm dia holes

with stainless steel flange. 150mm dia

26 Supplying and fixing air vessel made of 250 mm dia, 8 1.00 Each 16442.15

mm thick MS sheet, 1200 mm in height with air release

valve on top and flanged connection to riser, drain

arrangement with 25 mm dia gun metal wheel valve

with required accessories, pressure gauge and painting

with synthetic enamel paint of approved shade as

27 Providing and Fixing 25 mm dia. Air valve of Raising 2.00 Each 970.72

Main Line. For Air Release including supply, installing,

testing and commissioning etc. complete as directed by

Engineer in charge.

28 S. I. T. C. in position approved make Forged Brass Ball 9.00 Each 879.04

valves having Body, Ball & stem bonnet in forged brass.

Lever, washer & Nut in Carbon steel. Gland packing &

body seat ring in PTFE (Teflon) seal with female BSP

threads. Tested to a pressure not less than 20Kg/Sq.cm

with all accessories etc. Complete as per direction of

the Engineer-in-Charge.25mm Dia

29 Supplying installing testing & commissioning of 100 mm 6.00 Each 1801.78

dia. Pressure Gauge 1% Accuracy direct bottom 3/8"

BSP connection in brass socket & Range 0 to

Kg/Cm2 etc. necessary as directed by Engineer in

30 Providing and Installation SS 304 male to male siphone 6.00 Each 1150.03

tube size 3/8 inch dia for pressure gauge.

31 Providing and Fixing pressure switch in M.S./GI Pipe 4.00 Each 1414.86

line including connection etc. as required.

32 Providing and Installation SS 304 male to male siphone 4.00 Each 1150.03

tube size 1/4 inch dia for pressure switch.

33 Structural steel work in single section, fixed with or 190.00 Kg. 103.92

without connecting plate, including cutting, hoisting,

fixing in position and applying a priming coat of

approved steel primer all complete.

34 Supply Installation Testing and commissioning of 50000.00 Litre 7.22

Zincalvalume sheet Modular tank having size required

size with gross volume of Tank is 53 KL and Effective

Volume is 50 KL. Rates are including of supply and

erection of required Fittings & accessories like Internal

& External Ladder, Level indicators, Air Vent, Manhole,

Food Grade Liner & roof Railing as per manufacaturing

standard with required Nozzles for Supply and

descharge of Fire water as per site situation and as

directed by EIC.

It. No. Description of Item Quantity Unit Rate in Total

35 Supply, installation, testing and commissioning of Gun- 1.00 Each 10605.00

Metal Draw out connection for Fire Brigade connection

consisting of 63 mm dia instantaneous type male

coupling with built-in check valves and 100 mm dia.

flanged outlet complete with bolts, nuts and rubber

insertions as required as per IS:904-1983.

36 Supplying and fixing of fire brigade connection of cast 2.00 Each 6154.35

iron body with gun metal male instantaneous inlet

couplings complete with cap and chain as reqd. for

suitable dia MS pipe connection conforming to IS

as required: 2 Way FB

37 Supplying and fixing of fire brigade connection of cast 1.00 Each 12559.56

iron body with gun metal male instantaneous inlet

couplings complete with cap and chain as reqd. for

suitable dia MS pipe connection conforming to IS

as required: 4 Way FB

38 Supplying and fixing single headed internal hydrant 6.00 Each 5620.58

valve with instantaneous Gunmetal/Stainless Steel

coupling of 63 mm dia with cast iron wheel ISI marked

conforming to IS 5290 (Type -A) with blank

Gunmetal/Stainless Steel cap and chain as required:

Single Headed Stainless Steel

39 Supplying & fixing 63 mm dia. Stainless Steel (Grade 6.00 Each 2883.17

304) short branch pipe with 20 mm nominal internal

diameter size nozzle conforming , to IS:903 suitable for

instantaneous connection to interconnect hose pipe

coupling as required: (18.18.2) Stainless Steel (Grade

40 Supplying and fixing 63 mm dia, 15 m long RRL hose 12.00 Each 3955.40

pipe with 63 mm dia male and female couplings duly

bound with GI wire, rivets etc. conforming to IS

(type-A) as required: (18.16.2) Stainless Steel (Grade

41 Supply Installing Testing & Commissioning of M. S. 18 6.00 Each 4455.86

guage hose box to accommodate of 2-Nos 15-Mtrs.

Length Hose Box pipe & 1 No. of branch pipe with

Nozzle, With necessary fabrication support and joints

and 3 mm glass shutter including poweder coating etc.

complete as directed by engineer in charge.

42 Supplying and fixing first-aid Hose Reel with MS 6.00 Each 8000.05

construction spray painted in post . office red,

conforming to IS 884 complete with the following as

required. 25 mm nominal internal dia water hose

thermoplastic (Textile reinforced) type -2 as per IS:

12585 25 mm nominal internal dia gun metal globe

valve & nozzle. Drum and brackets for fixing the

equipments on wall. Connections from riser with 25 mm

dia stop gun metal valve & M.S. Pipe and socket.

43 Supplying & fixing 6 Kg. Capacity ABC Dry Chemical 12.00 Each 2828.00

powder Stored Pressure type fire Extinguisher As per

I.S-15683 having ISI marked Etc. complete as Directed

It. No. Description of Item Quantity Unit Rate in Total

44 Supply & installation ISI marked (IS:15683) Fire 12.00 Each 4545.00

Extinguisher, Carbon-di-oxide type capacity 4.5 Kgs.

flat base including valve, discharge hose of not less

than 10mm dia., 1M long and complete in all respects

including initial fill with CO2 gas conforming to IS:307-

1966 filled to a filling rate of not more than 0.667 and

wall suspension bracket. (LMR) etc completed as

45 Providing and Fixing Remote Push Button Switch for 6.00 Each 2139.83

Main Fire Pump on All floors for operation of Fire Pump

including control wiring 3 core x 1.5 Sq.mm copper

armoured with all required fittings and accessories with

all labour and materials as directed by Engineer in

46 Supplying, installation, testing & commissioning 1.00 Each 15068.14

Conventional sector panel suitable for following zones,

complete with visual indications for short circuit fault,

open circuit fault, fire condition and all other standard

facilities as per IS:2189 with mimic diagram for all

area/zone covered, complete with all

connections,interconnections as required. 10 Zone

47 Supplying, installation, testing & commissioning of 100.00 Each 1036.13

Conventional type smoke detector with builtin LED and

mounting base complete with all connections etc. as

48 Supplying, installation, testing & commissioning of 6.00 Each 376.26

Conventional type manual call box of ABS type in

surface/recess with stainless steel chain & hammer

assembly complete with glass and push button etc. as

49 Supplying, installation, testing & commissioning of 6.00 Each 449.58

Conventional type fire alarm sounder, mounted in

A.B.S. box etc. complete as required.

50 Providing, Fixing & installation PVC 100x100mm 80.00 Each 118.12

junction box for smoke detector including fixing in

ceiling with all labour & materials as directed by

engineer in charge.

51 Providing and erecting ISI mark Medium class RIGID 400.00 Mtr. 32.32

PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC fittings

& Junction boxes fixed with adhesive solution & Clamps

with following dia of pipes, in approved manner as

52 Design, Supply & Installation of Safety Signage 26150.00 Sq.Cm. 1.21

approved make made of zinc sulphide based glow in

the dark rigid sheet with high luminous property

enclosed in a transparent weather proof U/V stabilized

plastic pasted on 3mm thick Foam sheet for making

signage For All Floor etc. completed as directed by

engineer in charge.

53 Cutting hole by mechanical means of 25 to 150 mm dia 6.00 Each 414.10

(or more as per site situation) in slab / beam throuhout

the thickness including finishing the same with cement

mortar 1:3 as directed by Engineer in charge.

54 Providing and erecting HOT deep Galvanised iron strip 3.00 Kg. 77.77

wire 8 to 16 SWG.

It. No. Description of Item Quantity Unit Rate in Total

55 Providing & Making cage made from 1mm thick MS 1.00 Each 2828.00

Plate including opening shutter as per requirementas

per size of pump including all fitting i.e. hinges &

handles etc. Cage shall be fix properly with anchor bolt

in such away that it have provision to maintain the

pump on requirement asdirected by engineer incharge

with all laboured and materials etc. complete with two

coats of oil painting inside and outside surface of cage.

56 Getting Fire FSPA( Fire Safety plan Approval) & FSC ( 1.00 Job 50500.00

Fire Safety Certificate) with required Professional &

Administrative Charges for Fire Fighting System. All the

required documents pertaining to FSPA & FSC will be

prepared by contractor except fire drawing will be given

by the client/Architect.The required any Govt levies for

FSPA/FSC will be born by the Company/Client.

Rs. Twenty Eight Lakhs, Thirty Three Thousand, Three Hundred Eighteen and Seventy

Seven Paisa Only

I/We am/are willing to carry out the work @ ______________ % ______________

percent (should be written in figures and words) below / above, the estimated rates mentioned

above, amount of my/our tender works out as under :

Above all items of "Bill of Quantities" with Item Description, Unit, Qty, Rate & Amount have verified by me

and found order.

Deputy Executive Engineer Executive Engineer

District (R&B) Sub Dn. No.2 District (R & B) Division

Vadodara Vadodara