C/o Science Lab in Govt Senior Secondary School Bagachanogi in Tehsil Thunag Distt. Mandi HP SH C/o Building portion WS and SI Septic tank soak pit and rain water harvesting System

Amount

Excavation in foundation, trenches etc. in earth work in all kinds of soil such as pick work, Jumper work, blasting work in soft and hard rock, conglomerated rock or saturated soil and its intermediate classification of soil, chieseling work and wedging out rock (where blasting is prohibited) and pumping or bailing out watering/dewatering upto any lift, stacking the excavated soil upto any lead from the edge of excavation and then returning the stacked soil in layer when required into plinth, sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Excavation in drain and channels etc. in earth work in all kinds of soils such as pick work, jumper work, pick jumper work , pick jumper blasting work , blasting work in soil and hard rock conglomerate rock or saturated soil and its intermediate classification of soil including chiseling/wedging out of rocks (where blasting is prohibited) and pumping or bailing watering/dewatering including dressing of sides and bed and disposing of excavated earth upto any leads and lifts disposted earth to be leveled and neatly dressed including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing form work with steel plates 3.15mm(Three point fifteen millimeter) thick welded with angle iron in frame 30x30x5mm(Thirty millimeter into thirty millimeter into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and bellies in any height of propping and centering below supporting floor to ceiling upto floor all level and removal of the same for in situ-reinforced concrete and pain concrete work including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge in:- Vertical surface such as walls(any thickness) and the like including attached pilasters, buttersses plinth and string courses and the like

Foundation, footing basis of columns etc. and mass concrete .

Flat surfaces such as soffits of suspended floors, roofs, landings and the like Floors etc upto any thickness.

Beams, cantilever, girders and lintels sides and soffits of beams, beam hunching, cantilevers, bressumers and lintels in any depth in all height from floor..

Columns, pillars, Posts and struts, Square, rectangular or polygonal in plan

Stair cases with sloping or stepped soffits excluding landing

Edges of slabs and breaks in floors and walls in any width.

Providing and laying cement concrete mechanically mixed and vibrated 1:5:10 ( one cement : five sand : ten graded stone aggregate 40mm.(Forty millimetre) mechanically mixed and curing complete excluding the cost of form work in foundation and plinth including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying cement concrete 1:4:8 ( one cement: four sand: eight graded/ crushed stone aggregate 40mm (Forty millimetre ) nominal size) mechanically mixed and vibrated and curing complete excluding the cost of form work in foundation and plinth including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Stone soling/boulder filling dry hand packed in under floor including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying reinforceed cement concrete design mix M-25 (Twenty Five) grade of cement concrete work mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work upto all floor level including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge . Foundation, footing basis of columns etc. and the like mass concrete .

Suspended floors, roofs ,landings and shelves and their support, balconies, beams, girders, breasumers and cantilevers upto Floor any Level

Columns, pillars posts and struts square rectangular polygonal in plain upto Floor any Level

Stair cases (except spiral stair cases) excluding landing but including preparing of the top surface and finishing of nosing upto Floor any Level

Providing and laying cement concrete design mix M-20 (Design mix) grade of cement concrete work mechanically mixed and vibrated with minimum cement content of 320 kg/cum with graded/crushed stone aggregate 20mm. (Twenty millimetre ) nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work upto all floor level including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge Suspended floors, roofs ,landings and shelves and their support, balconies, beams, girders, breasumers and cantilevers upto Floor any Level

Wall (any thickness but not less than 0.10 m(Zero point One Zero meter ) thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level upto floor all level

Providing and laying reinforced cement concrete 1:2:4 (one cement : two Sand :four graded stone aggregate 20mm (twenty millimetre) nominal size mechanically mixed and vibrated to give an smooth and even surface including centring and shuttering or curring etc upto all level but excluding cost of reinforcement in String courses, copings, bed plates, anchor blocks, plain windows sills and the like including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire up to any level including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying Autoclaved cellular aerated concrete blocks masonry 225 mm (two hundred twenty five millimetre) thick confirming to IS 2185 (III) 1984 bonded togather with polythene based mortar and finsihed with 12 mm (twelve millimetre) cement plaster 1:6 (One cement : six sand) thick on both side complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying Autoclaved cellular aerated concrete blocks masonry 100mm (one hundred millimetre) thick confirming to IS 2185 (III) 1984 bonded togather with polythene based mortar and finsihed with 12 mm (twelve millimetre) cement plaster 1:6 (One cement : six sand) thick on both side including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying Brick work using common burnt clay building bricks in Superstructure above plinth level in Cement mortar 1:6 (One Cement : Six Sand) second Class Bricks including curing and carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying Half brick masonry in common burnt clay building bricks in cement mortar 1:3 (one Cement :Three Sand) (2nd Class Brick)in super structure above plinth level including curing and carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying Brick work using common burnt clay building bricks in foundation and plinth in Cement mortar 1:6 (One Cement : Six Sand) second Class Bricks including curing and carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying Half brick masonry in common burnt clay building bricks in cement mortar 1:3 (one Cement :Three Sand) (2nd Class Brick)in foundation and plinth level including curring and carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing 1st class deodar wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position complete as per specification and including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing to existing door frames, 35 mm (thirty five millimetre) thick factory made PVC panelled door shutter consisting of frame made out of M.S. tubes of 19 (nineteen) gauge thickness and size of 19mm x19mm (nineteen millimetre into nineteen millimetre) for styles and 15mmx15mm (fifteen millimetre into fifteen millimetre) for top & bottom rails, M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm (five millimetre) thick heat moulded PVC "C" channel of size 30mm thickness, 70mm (seventy millimetre) width out of which 50mm(fifty millimetre) shall be flat and 20mm (twenty millimetre) shall be tappred in 45 (forty five) degree angle on either side forming style and 5mm(five millimetre) thick, 95mm (ninety five millimetre) wide, PVC sheet out of which 75mm (seventy five millimetre) shall be flat and 20mm (twenty millimetre) shall be tapered in 45 (forty five) degree on the inner side to form top and bottom rail and 115mm (one hundred fifteen millimetre) wide PVC sheet out of which 75mm (seventy five millimetre) shall be flat and 20mm (twenty millimetre) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm (ten millimetre) thick, 20mm (twenty millimetre) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm (five millimetre) thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails, joints mitred and jointed with solvent cement adhesive i/c fixing of PVC shutter with existing frame with M.S. butt hinges 100x50x1.90mm (hundred into fifty into one point ninety millimetre) size with necessary screws etc complete. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 35mm (thirty five millimetre) thick 2nd class deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing angle iron cupboard frames frames manufactured from M.S.Angle iron section 25X25X5mm (twenty five into twenty five into five millimetre) thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 25X25 mm (twenty five into twenty five millimetre) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm (two point five millimetre) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 19mm (nineteen millimetre) thick Commercial Board water proof shutters with 6mm (six millimetre) thick hard wood edging with fixing PGI Sheet nickel plated piano hinges with screws etc complete as per specification and including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 40mm thick (fory millimetre) 2nd class deodar wood wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm (zero point fifty six millimetre) for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screw etc complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing Aluminium sheet 4 mm (four millimetre) thick composite panel having core of polythene fixed to internal side with screws or nails complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing Plain M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete.300x16mm (three hundred x sixteen millimetre) complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing anodized aluminum tower bolts (barrel type ) anodized trans parent or dyed to required shade and colour with screws etc. complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge . 200x10mm (Two hundred x ten millimeter)

150x10mm (One hundred fifty x ten millimeter)

100x10mm (One hundred x ten millimeter)

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge . 125 mm (One hundred twenty five millimeter)

100 mm (One hundred millimeter)

75 mm (seventy five millimeter)

Providing and fixing bright finished brass 100mm.(One hundred millimeter) Mortice latch and lock and a pair of levers, handles with necessary screws etc. complete (indian make of approved quality) as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 100mm (One hundred millimeter) bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing bright finished hard drawn hooks and eyes complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge . 250mm (Two hundred fifty millimeter)

200mm(Two hundred millimeter)

Providing and fixing 115mm (one hundred fifteen millimeter) bright finished brass heaps and stapples (safety type) with necessary screws etc complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 150mm (one hundred fifty millimeter) oxidized M.S. single acting spring hinges with necessary screws etc. complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 19mm (nineteen millimetre) thick terramite resistant water proof Commercial Board box including shelves and shutters the back side of cupboard/ cabinet of 8mm (eight millimetre) thick ply and cut portions of shelves shall be finished with 6mm (six millimetre) hard board edging. The cut portion of shutters from all the sides shall be finished with 12mm (twelve millimetre) hard wood edging the shutters from out side shall be finished with 1mm (one millimetre) thick laminated of approved shade including piano hinges and mgnetic catcher with all ascesories as per detail architectural drawing No. 195/1 to 199/1 etc complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

40 mm (forty millimetre) thick Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm (twenty millimetre) nominal size laid in one layer finished with a floating coat of neat Cement complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

25 mm (twenty five millimetre) thick wooden flooring of 1st class deodar wood laid over C.C. slab (to be paid separately) ( thinly coated with thin layer of hot bitumen blown type) @ 2.45 kg per sq m (two point forty five kilogram per square metre) including fixing of wooden planks of size 40 x 200 mm (forty into two hundred millimetre) in position over wooden frame work 750 mm x 625 mm (seven hundred fifty millimetre into six hundred twenty five millimetre) fixed in c.c. floor including planning and levelling complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying 20 mm (twenty millimetre) thick heavy duty vitrified acid and alkali resistant stain resistant 30cm x 30cm (thirty centimetre into thirty centimetre) tiles Babylon white grey colour of Durastone of approved shade of Somany/NITCO/Kajaria or equivalent make laid in floors, treads of steps and landings on a bed of 12mm (twelve millimetre) thickness of cement mortar 1:3 (one cement : three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) incliding rubbing and polishing complete with tiles of white shades complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying 20mm (twenty millimetre) thick heavy duty vitrified acid and alkali resistant stain resistant 30cmx 30cm (thirty centimetre into thirty centimetre) tiles Babylon white grey colour of Durastone of approved shade Somany/NITCO/Kajaria or equivalent make laid in skirting and risers of steps upto any height on 12mm (twelve millimetre) thickness of cement mortar 1:3 (one cement : three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) incliding rubbing and polishing complete with tiles of white shades complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying 10mm (ten millimetre) thick full body vetrified tiles of Asian/Johnson/Kajaria or equivalant 600x600mmx10mm (six hundred into six hundred millimetre into ten millimete) manufactured of approved shade and colour in flooring, treads of steps and landing laid over 12mm (twelve millimetre) thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 10mm (ten millimetre) thick full body vetrified tiles of AGL/Johnson/Kajaria/Orient Bell or equivalant 600x600mmx10mm (six hundred into six hundred millimetre into ten millimete) manufactured of approved shade and colour in skirting risers of steps and dados on 12mm (twelve millimetre) thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying 8 mm (eight millimetre) thick Anti Skid Ceramic tile 300 x 300 mm (three hundred into three hundred millimetre) of AGL/Johnson/Kajaria/Orient Bell or equivalant manufactured of approved shade and colour in flooring, treads of steps and landing laid over 12mm (twelve millimetre) thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying 8 mm (eight millimetre) thick Anti Skid Ceramic tile 300 x 300 mm (three hundred into three hundred millimetre) of AGL/Johnson/Kajaria/Orient Bell or equivalant manufactured of approved shade and colour in skirting risers of steps and dados on 12mm (twelve millimetre) thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying 10mm (ten millimetre) digital ceramic tile of size 300 x 600 mm (three hundred into six hundred millimetre)in skirting risers of steps and dados on 8 mm (eight millimetre) thick cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing wall paneling of 12 mm (twelve millimeter) thick pre laminated particle board (one side) of approved brand of soft wood 4x4 cm frames @60 cm center to center on both side fixing with rawl on wooden plugs and screws and showing 8 mm wide in elevation and finished teak wood beading outlay 25x12 mm deep groves of required pattern of 25x12mm(twenty five millimeter x twelve millimeter) /Cornish out to 75x60mm(seventy millimeter x sixty millimeter) of different pattern in top middle and corner joints including polishing and painting groves complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying black granite stone in flooring 20mm (twenty millimetre) (average) thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying 20 mm (twenty five millimetre) thick Kota stone slab flooring 20 mm (Twenty millimetre) (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying Kota stone slab 25 mm (twenty five millimetre) thick in risers of steps,skirting dado and pillars laid on 12 mm (twelve millimetre) (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying red sand stone slab flooring 40mm average thick on 20mm average thick base of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish finish complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 0.60mm (Zero point six zero milimetre) thick pre painted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5 ( five) micons primer coating to back coat of polyester of 5 microns over 5 microns primer coating including fixing with screws, prepainted iron J or L hooks, bolts and nuts 6mm(six milimetre) dia with prepainted limpet and rubber washer complete with all accessories as required complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing ridges or hips 60 cm (Sixty centimeter) overall with 0.60 mm (Zero point sixty millimeter) thick preprinted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat or regular modified polyester organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyester of 5 (Five) microns over 5 (Five) microns primer coating including fixing with preprinted iron J or L hooks, bolts & nuts 6mm(Six millimeter) dia and preprinted G.I. limpet and bitumen washers complete with all accessories as required complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing valley 60cm (Sixty centimetre overall 0.60mm (Zero point six zero milimetre)thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating including fixing with screws, preprinted iron J and L hooks,bolts & nuts 6mm (Six milimetre)dia and prepainted G.I. limpet and bitumen washers complete with all accessories as required complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in-charge .

Providing and fixing flushing 38cm(Thirty eight centimeter) overall with 0.60mm ( Zero point six milimetre)thick pre painted sheet in roofing with hot dipped metallic Zink coated sheet with top coat of regular modified polyester organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with pre painted J or L hooks, bolts and nuts 6mm(Six milimetre) dia meter & pre painted G.I. limpet & bitumen washers complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing on wall face 100mm (One hundred milimetre) dia PVC(D-Plast) rain water pipes of working pressure not less than 4.5 Kg/sqm(Four point five kilogram per square metre) including filing the joint with approved adhersive complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing on wall face (D-Plast) accessories for rain water pipes including filling the joint with approved adhesive complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge . PVC Plain Bend 100mm(One hundred milimetre) dia.

Shoe 100mm (One hundred milimetre) dia.

Providing and fixing M.S. BP Sheet 1.66 mm (One point sixty six milimetre) to 2mm (Two milimetre) thick in eves board/ facia/soffit/ceiling including cutting ,fixing and welding to steel roof members and applying a coat of red lead primer complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Steel work welded in built up sections, trusses and framed work,including cutting, hoisting fixing in positiobn and applying a priming coat of red lead paint complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge Trusses and trussed purlins in buildings including carriage of materials with in all leads,lifts and other incidentals.

Gratings framed guard bars laddeds railing brackets and similar works including carriage of materials with in all leads, lifts and other incidentals.

In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like.

Providing and fixing 62.5mm x 75mm (sixty two point five millimetre into seventy five millimetre) hand rails in 1st class Indian teak wood straight length complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm (twenty into ten into two milimetre) braced with flat iron diagonals 20x5mm (twenty into five milimetre) size with top and bottom rails of T iron 40x40x6mm (forty into forty into six milimetre) with 38mm(thirty eight milimetre) dia steel pully complete with bolts and nuts locking arrangements, stoppers, handles, including carriage of materials within all leads, lifts and other incidentals.

6mm (Six millimeter) cement plaster to ceiling in cement mortar 1:3 (one Cement : three Sand) complete as per specification including curring and carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

15mm (fifteen milimetre) cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering up to all floor level includingarises, internal rounded angles,chamfers and/or rounded angles not exceeding 80mm(eighty milimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement: six sand) complete as per specification including curring and carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

15mm (fifteen milimetre) cement plaster in single coat on the fair side of brick/concrete/stone wall for interior plastering upto floor all level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty milimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement:6 sand) complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

15mm (fifteen milimetre) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (Eighty milimetre) in girth and finished even and smooth in Cement mortar 1:4 (1 cement:4 sand) complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete as per specification including curring and carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade i/c thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth i/c applying of putty a required for making the surface complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth Priming coat with distemper primer complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Distempering(one coat) with oil bound washable distemper with oil bound distemper on ceiling and/or sloping roofs of approved brand and manufature and of required shade,on decorated wall surfaces to give an even shade,after thoroughly brushing the surface clean of all grease,dirt,loose pieces of scales and also including preparing the surface even and sand papered smooth complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease,dirt and other forein matter sand papering and knotting ready mixed paint with wood priming pink of approved brand and manufacture (Nerolac/Asian Shalimar) conforming to IS: 3536-1966 brushing complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Painting two coats (excluding priming coat) on new wood and wood based surfaces with ready mixed paint brushing to give an even shade including cleaning of oil, grease,dirt and and other foreign matter sand papering and stopingready mixed paint other thanwhite complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil grease dirt and other foreignmatter and scoured with wire brushes fine steel wool scrubers and sand paper complete with ready mixed priming pant brushing red leadred oxide/zinc oxide chrome complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foregin matters Enamel paint other than white complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing plinth protection 50mm (fifty millimetre) thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm (twenty millimetre) nominal size) complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing under layer for plinth protection of 75mm (Seventy Five millimetre) thick (unconsolidated) bed dry brick/stone aggregated 40mm (Forty millimetre) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Constructing course rubble dressed "U" shape open surface drain with side wall 15X22cm (fifteen into twenty two) in cement mortor 1:6 (one cement: six sand) and in side plstring with cement plaster 1:3 (one cement : three sand ) including earth work and laying 10cm (Ten Centimetre) cement concrete 1:5:10 (one cement :five sand:ten graded stone aggregate 40mm (Forty millimetre) nominal size) and 7.5cm (seven point five centimetre) cement concrete 1:2:4(one cement :two sand ;four graded stone aggregate 20mm (Twenty millimetre) nominal size) and finishing with a floating coat of neat cement and curing complete as per standard design complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing High Lax Cilicate perforated water proof board 600 x 600 x 8 mm (six hundred into six hundred into eight millimetre) in ceiling fixed over aluminium Tee sections with screws and including hangers complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 612 mm (six hundred twelve millimetre) thick green chalk board (non magnetic with superior quality framing specially anodized aluminium profile 20x15 mm (twenty into fifteen millimetre)with corners of black surafce shall be non porous cermaic particle on the top on the green surface foer the writing with chalk over 11 mm (eleveen millimetre) thick particle board which shall have backing material of galavanized sheet 0.28 mm (zero point two eight millimetre) approx the board shall be fixed on the wall with clamps complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Supplying cast iron cover with frame for manhole for frame of internal dimension 455 x 610 mm (four hundred fifty five into six hundred ten millimetre) rectangular CI cover the weight of cover to be not less than 38 kg (thirty eight kilogram) complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing high pressure uPVC spigot and socket waste and ventilating pipes confirming to ISI -15328 SN8 of Supreme/Fenolex/Kitech marked including fixing with approved adhesive etc. complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge . 110 mm dia (one hundred ten millimetre) dia

Filling with brick aggregate in soak pit complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing to wall ceiling and floor galvanized mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floors complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge . 20mm (Twenty Millimetre) nominal bore

25 mm (Twenty Five Millimetre) nominal bore

Providing and fixing to wall and ceiling and floor Polythene Aluminium composite pressure pipe of 15mm (fifteen millimetre) dia of Kitec confirming to ISI 15450-2004 including making good the wall, ceiling and floor complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying in trenches, galvanized mild steel tubes (medium grade), tube fittings (earth work in trenches to be measured and paid separately) complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge . 25 mm (Twenty Five Millimetre) nominal bore

Making connection of galvanized steel distribution branch with galvanized mild steel main 20mm(Twenty Millimetre) to 40mm (Forty Millimetre) nominal size bore by providing and fixing tee including cutting and threading the pipes complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Construction chamber 300mm x 300mmx500mm (Three Hundred x Three Hundred x Five Hundred millimetre) inside size for stop cock with C.I. surface box 100mm x 100 mm x 75mm (One Hundred x One hundred x Seventy Five millimetre) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement : two sand :four graded stone aggregate 20mm (Twenty millimetre) nominal size) 75mm (Seventy Five millimetre) thick foundation concrete 1:5:10 ( one cement : five sand : ten grades stone aggregate 40 mm (Forty millimetre) nominal size) and inside plastering with cement mortar 1:3 (one cement :three sand) finished with a floating coat of neat cement including curing complete with 100 mm (One Hundred millimetre) thick walls of brick masonry in cement mortar 1:5 (one cement: five sand) complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and. fixing Anglo Indian Universal WC No. 2061 with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) of Cera/Hindware/jaguar complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing white plastic seat and cover for wash down water closet with C.P. Brass hinges and rubber buffers of Cera/Hindware/jaguar complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing vitreous China wash down, water closet Orissa Pattern No.2071 squatting pan (Indian type W.C pan) size 580mm x 440 mm (five hundred eighty millimetre into four hundred forty millimetre) (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) of Cera/Hindware/jaguar complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing of a pair of vitreous China 250mm x 130mmx30mm (two hundred fifty millimetre into one hundred thirty millimetre into thirty millimetre) foot rests for long pattern squatting pan water closet of Cera/Hindware/jaguar in cement mortar 1:3 (1 cement:3 sand), complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing PTMT White colour high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern No. 2602 of Cera/Hindware/jaguar with fittings with a pair of brackets with fittings such a lead valve, syphon, 15mm (fifteen millimetre) nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm (forty millimetre) dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing PTMT jet spray of Cera/Hindware/jaguar with 1.5 mtr. (one point five metre) Tube complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing wash basin No 1007 of size 550 x 400 mm (five hundred fifty into four hundred millimetre) of Cera/Hindware/jaguar with single hole for pillar tap with cast iron or mild steel brackets painted white including cutting holes and making good the same but excluding fittings flat back complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing Vitreous China 600mm x 450mm x 250mm (six hundred millimetre into four hundred fifty millimetre into two hundred fifty millimetre) laboratory sink with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding fittings complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 32 mm (thirty two millimetre ) dia C.P brass waste for wash basin or sink of approved brand and menufature complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing M.I. Union for wash basin or sink 32mm (thirty two millimetre ) dia complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 32 mm (thirty two millimetre ) dia C.P. Bottle Trap for wash basin or sink complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 600mm x 450 mm ( six hundred x four hundred fifty millimetre) beveled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing C.P. Brass Towel rail No 1581 of Jaguar complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws 600mm x 20mm (six hundred x twenty millimetre) complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 600mm x 120 mm (six hundred x one hundred twenty millimetre) glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P. Brass screws complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing toilet paper holder No 1533 of Jaguar/ESS-Ess or its equivalent in C P Brass complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing liquid soap container with C.P. Brass lid and brackets fixed to wooden plugs with C.P. Brass screws complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing C.P brass soap dish no. 1531 of Jaguar or its equivalent complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 15 mm (Fifteen millimetre) dia C.P. Brass bib tap with Capstan head of Jaguar complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 15 mm (Fifteen millimetre) dia C.P. Brass pillar tap with Capstan head 15 mm dia of Jaguar complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 15 mm (Fifteen millimetre) dia C.P. Brass stop cock complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 15 mm (Fifteen millimetre) dia PTMT concealed stop cock with flange of Jaguar and approved quality and colour complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing P.V.C. connection with Brass unions 300/450 mm (three hundred/four hundred fifty millimetre) length 15 mm(fifteen millimetre) nominal size complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 32mm (thirty two millimetre) nominal bore C.P. Brass waste, and plug for glazed ware sinks, basins, etc. with long screwed shank and flynut and fixed to steel pipe including vulcanite plug, brass chain and stud complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing brass full way valve with wheel complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge . 15 mm (fifteen millimetre) nominal bore

20 mm (twenty millimetre) nominal bore

25 mm (Twenty Five Millimetre) nominal bore

Providing and fixing brass ball valve (horizontal plunger type) High pressure with polythene plastic floats 15 mm (fifteen millimetre) nominal bore complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm (fifteen millimetre) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level 1000 litres(one thousant litres) net capacity tank complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.110*90 mm (one hundred ten x ninty millimetre) complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing high pressure uPVC spigot and socket waste and ventilating pipes confirming to ISI -15328 SN8 of Supreme/Fenolex/Kitech marked including fixing with approved adhesive etc. complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge . 110 mm dia (one hundred ten) dia

150 mm dia(one hundred fifty) dia

Providing and fixing 110 mm ( one hundred ten millimetre) dia PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete /including fixing with approved adhesive etc. complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 110 mm ( one hundred ten millimetre) dia PVC door bend with oval access door insertion rubber washer 3 mm Three millimetre) thick bolts and nuts ISI market complete including fixing with approved adhesive etc. complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 110 mm ( one hundred ten millimetre) dia PVC Collar ISI marked including fixing with approved adhesive etc. complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 110 mm ( one hundred ten millimetre) dia PVC plain bends ISI marked including fixing with approved adhesive etc. complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 110 mm ( one hundred ten millimetre) dia PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing PTMT grating round of approved quality and colour 100 mm (one hundred millimetre) nominal dia complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing Grab Bar of Jaguar WAC-WHT-BR0600 692 mm satinless 40mm dia steel pipe at 78 m (seventy eight metre) height with MS plate as the position of seat complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying (to level or slopes) and jointing reinforced concrete light duty non pressure pipes I.S. Class N.P.2 or P of the following internal diameter with collars and butt ends prepared for collar joint including testing of joints complete. 150 mm (one hundred fifty millimetre) complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying Cement concrete 1:5:10 ( one Cement : five Sand : ten graded stone aggregate 40 mm (forty milimetre) nominal size) in hunching of S.W. pipes of the following internal diameters, Including concrete for beddings, necessary form work and curing complete.150 mm (one hundred millimetre) complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing stoneware gully trap grade 'A' complete with C.I grating, brick masonry chamber in cement mortar 1:5 (one cement :five sand)and water tight C. I. cover with frame of 300mmx300mm( three hundred millimetre x three hundred millimetre) size (inside) the weight of cover to be not less than 4.53kg and frame to be not less than 2.72kg.(two point seven two kilogram) square mouth trap 150*100 mm ( one hundred fifty x one hundred milimetre)size P or R type complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Constructing manhole with R.C.C. top slab in1:2:4 mix in ( one cement : two sand : four graded stone aggregate 20mm (twenty milimetre) nominal size) foundation concrete1:4:8 (one cement : four sand : eight )graded stone aggregate 40mm (forty milimetre)nominal size) inside plastering 15mm (fifteen millimetre) thick with cement mortar 1:3 (one cement three sand) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix (one cement : two sand : four graded stone aggregate 20mm (twenty millimetre) nominal size) finished smooth complete including curring and testing Inside size 800 x 800 mm and 1000 mm (one thousand millimetre) deep including C.I. cover and frame (medium duty) 455 x 610 mm (four hundred fifty five into six hundred ten millimetre) internal diameters total weight of cover and frame to be not less then 38 Kg. (thirty eight kilogram) (weight of cover 23 Kg. (twenty three kilogram) Weight of frame 15 Kg.(fifteen kilogram) with 300 mm (three hundred millimetre) thick walls of square rubble masonry in cement mortar 1:3 (one cement : three Sand) complete as per specification including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge

Shakti Singh

MOHAN LAL THAKUR