Kerala

Active

Works

Civil Works - Buildings

GENERAL-134/2026-27-Providing Basic facilities Muncipal Office-General Civil Work

Local Self Government Department

Kothamangalam | Ernakulam, Kerala

Amount: ₹67.7 LCloses: 5 Oct 2026

Timeline

Published9 Sept 2026
Closes5 Oct 2026
Bid Opening7 Oct 2026

Tender Value

₹67.7 L

EMD Value

₹50,000

Closing Date

5 Oct 2026, 11:00 am

Tender Inviting Organisation

Name

Assistant Engineer

Address

Assistant Engineer Municipal Office, Kothamangalam.

Work Description

GENERAL-134/2026-27-Providing Basic facilities Muncipal Office-General Civil Work

Tender Information

Tender ID

2026_LSGD_868750_2

Reference Number

PW1-15352/22

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Location

Kothamangalam

Source Website

Subscribe to view

Eligibility / Pre-Qualification

PLEASE REFER TENDER DOCUMENTS

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredLicense (.pdf)

RequiredPreliminary Agreement (.pdf)

RequiredSBD (.pdf)

RequiredRequisition for E Payment (.pdf)

RequiredAdditional PRICE-3 Documents (.pdf)

RequiredGST Document (.pdf)

RequiredSchedule (.xls)

Fee & Financial Details

Tender Fee Amount

₹2,760

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹50,000

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

9 Sept 2026

Published

9 Sept 2026

Bid Opening

7 Oct 2026

Download Starts

9 Sept 2026

Download Ends

5 Oct 2026

Submission Starts

9 Sept 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (43 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1maintanence
1.001	15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet	1,255.93	sqm	-	-
1.002	10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	1,585.23	kilogram	-	-
1.003	OD43309/2026-2027:Providing & fixing 30mm PUF sandwich roofpanel with top layer of 0.41mm thickness and bottom layer of 0.38mm thickness using JSW steel or Tata steel sheet having AZ 150 as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size (5.5x55mm) with EPDM seal complete upto any pitch in horizontal / vertical / curved surfaces, but excluding the cost of purlins, rafters, trusses and including cutting to size and shapes where ever required.	1,255.93	sqm	-	-
1.004	15.12.2:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area beyond 3 sq. metres	21	each	-	-
1.005	15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below	4	each	-	-
1.006	50.6.2.3:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete	24.86	cum	-	-
1.007	13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)	192.39	sqm	-	-
1.008	21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)	107.31	kg	-	-
1.009	21.1.2.1:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)	132.97	kg	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.50 MB

Work Item Documents

sbd.pdf

Tender Documents • 2.97 MB

PRICE3docs.pdf

Additional Documents • 0.08 MB

BOQ_1471446.xls

BOQ • 0.33 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1maintanence
1.001	15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet	1,255.93	sqm	-	-
1.002	10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	1,585.23	kilogram	-	-
1.003	OD43309/2026-2027:Providing & fixing 30mm PUF sandwich roofpanel with top layer of 0.41mm thickness and bottom layer of 0.38mm thickness using JSW steel or Tata steel sheet having AZ 150 as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size (5.5x55mm) with EPDM seal complete upto any pitch in horizontal / vertical / curved surfaces, but excluding the cost of purlins, rafters, trusses and including cutting to size and shapes where ever required.	1,255.93	sqm	-	-
1.004	15.12.2:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area beyond 3 sq. metres	21	each	-	-
1.005	15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below	4	each	-	-
1.006	50.6.2.3:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete	24.86	cum	-	-
1.007	13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)	192.39	sqm	-	-
1.008	21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)	107.31	kg	-	-
1.009	21.1.2.1:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)	132.97	kg	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1maintanence

1.001

15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet

1,255.93

sqm

1.002

10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

1,585.23

kilogram

1.003

OD43309/2026-2027:Providing & fixing 30mm PUF sandwich roofpanel with top layer of 0.41mm thickness and bottom layer of 0.38mm thickness using JSW steel or Tata steel sheet having AZ 150 as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size (5.5x55mm) with EPDM seal complete upto any pitch in horizontal / vertical / curved surfaces, but excluding the cost of purlins, rafters, trusses and including cutting to size and shapes where ever required.

1,255.93

sqm

1.004

15.12.2:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area beyond 3 sq. metres

each

1.005

15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

each

1.006

50.6.2.3:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

24.86

cum

1.007

13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

192.39

sqm

1.008

21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

107.31

1.009

21.1.2.1:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

132.97