Renovation and Development of park near H.No.-403 and Park near H.No.430 in sector-18, ward no.07 Yamunanagar. (recall)

Amount

Seated Chest Press (2024) :- Providing, designing and fixing Seated Chest Press of Pull pair of size 1800 X 700 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary anddressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V r e s i s t a n t environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self-lubricated made by reputed company to be approved by Engineer-in-Charge

CYCLE: This equipment strengthens Lower and Upper Limb muscles. It improves flexibility of joints and helps to lose weight. Products Sizes and Dimensions: 1050 MM x 560 MM x 1470 MM fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colorful and U V resistant environmentally friendly. Bearing used shall be maintenance free, duly oiled sealed and self-lubricated made by reputed company to be approved by Engineer-in-Charge

Twister (2024) :- Providing, designing and fixing Twister of size 1700 X 1300 X 1300 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colorful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self-lubricated made by reputed company to be approved by Engineer-in- Charge

Bidder Name

Amount

Sanjeev Kumar S/o Sh. Mohinder Singh (GSTN-NA) BID ID -1230746

New Haryana Cooprative LC Society (GSTN-06AAGAT1228G1ZP) BID ID -1230197

Manmohan contractor (GSTN-NA) BID ID -1232365

ADML INFRASTRUCTURE (GSTN-NA) BID ID -1231566

AMBER CONSTRUCTIONS (GSTN-NA) BID ID -1232190

SANJAY KUMAR CONTRACTOR (GSTN-NA) BID ID -1228183

SANJAY KUMAR CONTRACTOR (BID ID -1228183)

Sanjeev Kumar S/o Sh. Mohinder Singh (BID ID -1230746)

ADML INFRASTRUCTURE (BID ID -1231566)

AMBER CONSTRUCTIONS (BID ID -1232190)

Manmohan contractor (BID ID -1232365)

SANJAY KUMAR CONTRACTOR (BID ID -1228183)

ADML INFRASTRUCTURE (BID ID -1231566)

AMBER CONSTRUCTIONS (BID ID -1232190)

Sanjeev Kumar S/o Sh. Mohinder Singh (BID ID -1230746)

Manmohan contractor (BID ID -1232365)