REPAIR AND CLEANING OF SEWAGE LINES BOUNDARY WALL HARD STANDING ETC AT AF STN UNDER GE MISAMARI.

Amount

Demolition Brick Work or Stone/ Bolder masonary built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any description, complete all as specified and as directed. Note:Demolished material to be used for filling under floors to bring upto required level.

Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed. (Note:Demolished material to be used for filling under floors to bring upto required level, if neccesary)

Demolition of Cement Concrete (un-reinforced) of any description and in any position not otherwise specifically provided for,complete all as specified and as directed.

Demolition of Cement Concrete (reinforced) of any description and in any position not otherwise specifically provided for,complete all as specified and as directed.

Demolition / breaking up damaged SGSW pipe of any position and of internal dia of pipe 150 mm including demolition of PCC, and removing dismantled material where directed at a distance n exc 50 m, complete all as specified and as directed.

All as per item No.5 above here in before but 200 mm internal dia of pipe ,complete all as specified and as directed.

Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Taking up or down Steel Tubing 20mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Demolition of unserviceable nahani traps / broken gully trap floor trap of any description and removing material from site, complete all as specified and as directed.

Dismantling poles/struts (steel/RCC/wood), any section embedded in cement concrete,including taking out embedded portion and making good disturbed ground, complete all as specified and as directed.

Dismantling poles/struts (steel/RCC/wood), any section embedded in natural ground,including taking out embedded portion and making good disturbed ground, complete all as specified and as directed.

Dismantling fencing wire mesh, any type, complete all as specified and as directed.

Excavation in trenches not exc. 1.5 Metre Wide and not exc. 1.50 Metre in Depth for foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes for laying of UG Cable/Pole/Stays etc, and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm in Soft/Loose Soil, complete all as specified and as directed.

Removing excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.

Excavating in post holes (or simlar holes) each n exc. 0.50 cum getting out returing filling in and ramming earth as broken rubble mixed with earth around in layers n exc. 25 cm watering & removing surplus soil to a distance n exc. 50 m and making good surface.

M&L Cement Concrete 1:4:8, Type D2, (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. including Use and Waste of Formwork as required/ordered, complete all as specified and as directed.

M&L Cement Concrete 1:3:6, Type C2, (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. including Use and Waste of Formwork as required/ordered, complete all as specified and as directed.

M&L Cement Concrete 1:2:4 type B2 (40mm graded aggregate) in Surface Channels and Drains, etc. including Formwork as required/ordered at Site(s), complete all as specified and as directed.

M&L for PCC 1:3:6 type C1 ( Using 20mm graded agg) as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B1 ( Using 20mm graded agg) as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates concrete complete all as specified and directed.

M&L Cement Concrete 1:3:6, C2 (40mm graded aggregate), 75mm thick as in Plinth Protection, etc., laid in alternate bays, finishing Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L for 100mm thick Cement Concrete 1:2:4,type B1 (20 mm graded aggregate) as in floors finishing Concrete Surfaces Even and smooth without using extra cement , complete all as specified and as directed.

M&L 75mm thick Cement Concrete 1:3:6, type C2 (40mm graded aggregate), as in Sub-base finishing Concrete Surfaces Even and rough without using extra cement, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

All as per item no. 25 here in before but except bricks, complete all as specified and as directed.

M&L brick work with sub-class ‘B’ Bricks Straight or Curved on Plan exc.any radius in half brick thick built in Cement Mortar 1:3, complete all as specified and as directed.

M&L Brick Work with old size Sub-Class ‘B’ Bricks, laid on Edge as Side Walls of Brick Drains in Slope, Bedded and Jointed in Cement Mortar 1:6 and Pointed in Cement Mortar 1:3, complete all as specified and as directed.

M&L Extra forming Fair Finished to Drains or Channels 30 Cm Inner Girth in Cement Concrete using Extra Cement including Forms Moulds Mitred/ Stopped Ends, etc., complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:4 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Pre-cast Reinforced Cement Concrete (nominal mix) 1:2:4 type B1(20mm graded stone aggregate) in Slab Supported on wall, Cover Slabs for Manholes, Shelves and Similar Articles, etc., Set in Cement Mortar 1:4 including use and waste of Formwork as required/ordered at Site(s), complete all as specified and as directed. NOTE : Reinforcement will be measured and paid separately under relevant Item.

M&L Cement Concrete Bed 1:3:6 (40mm graded aggregate) of 150mm bore (dia) Drain Pipes including Packing under and Haunching to Sides of the pipes after Laying and Testing of Pipe, complete all as specified and as directed.

All as per Item no.33 here in before but for 200 mm, complete all as specified and directed.

M&L Salt-Glazed Stone-ware Drain Pipe 150mm bore (dia), Grade ‘A’, laid in Trenches, Jointed with Cement Mortar 1:1and testing, complete all as specified and as directed.

All as per Item no.35 here in before but for 200 mm, complete all as specified and directed.

S & F 100 mm cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 1:2:4, complete all as specified and directed.

All as per Item no.37 here in before but for nahani trap, complete all as specified and directed.

M&L TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

All as per Item no.39 here in before but for 6mm to 8mm, complete all as specified and directed.

M&L TMT Bars 5mm dia and over upto and including 10mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

Fixing Only Chain Link Fencing including line wire, any mesh, size and type to any type of standards, rails, Straining bolts etc, including provision of binding wire, complete all as specified and as directed. NOTE: Chain link fencing will be paid at Supply Only rates and Cost of Mild Steel Binding Wire shall deem to be included in the quoted Unit Rate.

Supply Only Chain Link MS galvanised fencing, any size or type complete all as specified and as directed.

S & F of mild steel scew bolts 5 to 10 mm (Machine made) with hexagonal or squre heads at one end and screwed the other , or screwed both ends, each screw end to be fitted with washers and one hexagonal or squre nut , exc 10 cm to 15 cm long complete all as specified and directed.

M&L Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including scurring bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed.

M&L preparing new or previously untreated Steel and Iron Surfaces of any description, n. exc. 10 Cm Width or Girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L for Cutting into existing manholes 150mm dia of internal pipe for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed.

All as per item No.47 above here in before but 200 mm internal dia of pipe ,complete all as specified and as directed.

Supply & laying Steel Water Tubing 15mm bore (dia), galvanised, ‘medium grade’ with all Fittings, fixed on walls, ceiling or laid in floors or any other situation, complete as all specified and as directed.

Refixing only old steel tubing 15mm bore in new or old position as in wall and ceiling or laid in floors complete as all specified and as directed.

Supply & laying Steel Water Tubing 20 mm bore (dia), galvanised, ‘medium grade’ with all Fittings, fixed on walls, ceiling or laid in floors or any other situation, complete as all specified and as directed.

Refixing only old steel tubing 20mm bore in new or old position as in wall and ceiling or laid in floors complete as all specified and as directed.

S&F in repair PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, laid in Trenches or in Floors complete all as specified and as directed.

All as per Item no.53 here in before but for 110 mm, complete all as specified and directed.

S&F in repair PVC Flushing Cistern 10 Litre capacity White, Low Level, valve less, syphonic action type with Inlet, Ball Valve, Float and handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed, complete all as specified and as directed.

S&F in repair Vitreous China White Squatting Pan, ‘Orissa’ Pattern of size 580x440 mm with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces and fixed, complete all as specified and as directed.

M&L Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with Trap and Fixing Bolts (excluding Flushing Cistern and Flush Pipe) including connection to drain (or outgoing pipe) and to Flushing Pipe, Anti-syphonage Pipe, etc. and Making Good to Floor /distrubed surfaces and fixed-in-repair including health faucet with 1mtr long easy flex tube in chrom finish & wall hook, complete all as specified and as directed.

S&F in repair Vitreous China Wash Hand Basin 550x 400mm in size, White (Flat Back or Angle Back Type) with 32mm bore waste coupling of PTMT (half or full threaded of minium weight 32-445gms), a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed.

S&F in repair Stop Valve 15mm bore (dia), Fancy type, chromium plated, screwed down, high pressure, with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions and fixed, complete all as specified and as directed.

S&F in repair Bib Tap 15mm bore (dia), Cast Copper Alloy, Chromium Plated with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed.

S&F in repair vitreous china bowl urinal flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe , and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in CM 1:2 and incl 60cm long brass screws pointing around urinal back in cement etc, complete all as specified and directed.

M&L for loose filling with aggregate of gauge 40 to 80mm in soakage wells, complete all as specified and directed.

M&L Formwork to sides of Pillars, Posts, Struts, Piers, Columns and stanchions, flat, rough finished surfaces of concrete, complete all as specified and as directed.

M&L Reinforced Cement Concrete (Nominal Mix) 1:2:4,type B1 (20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.50 Metre span, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L Reinforced Cement Concrete (Nominal Mix) B1 1:2:4 (20mm graded aggregate) in Columns, Pillars, Piers, Posts and Struts, etc. complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

S&F in repair Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing & straining & fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

M&L preparing new or previously untreated Steel and Iron Surfaces of any description, over. 10 Cm Width or Girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L preparing new of Walls and applying Two Coats of Cement Base Paint over a coat of alkali resistant priming paint, complete all as specified and as directed.

M&L Cleaning GULLY TRAP (Manhole type) not exc. 0.50 METRE in depth, by opening Cover and taking out accumulated Brick Bats, Garbage, Silts or any other Items, re-fixing the Cover after cleaning of Gully Trap, removing and carrying Brick Bats, Garbage, Silts, etc. to a distance exc.50.00 Metre but not exc. 100.00 Metre and burried (minimum 50 Cm below Normal Ground Level) by Excavating of Earth Pits and Returning, Filling in, Dressing of surplus Soils and providing ground to Slope, etc., (as required/ordered at Site), complete all as specified and as directed.

All as per Item No. 69 here-in-before but GULLY TRAP (Manhole type), depth exc. 0.50 METRE and not exc. 1.00 METRE, complete all as specified and as directed.

M&L Cleaning MANHOLE, depth not exc. 0.50 METRE, by opening Cover and taking out accumulated Brick Bats, Garbage, Silts or any other Items, re-fixing the Cover after cleaning of Manhole, removing and carrying Brick Bats Garbage, Silts, etc. to a distance exc. 50.00 Metre but not exc. 100.00 Metre and burried (minimum 50 Cm below Normal Ground Level) by Excavating of Earth Pits and Returning, Filling in, Dressing of surplus Soils and providing ground to Slope, etc., (as required /ordered at Site), complete all as specified and as directed.

All as per Item No. 71 here-in-before, depth of MANHOLE exc. 0.50 METRE and not exc. 1.00 METRE, complete all as specified and as directed.

All as per Item No. 71 here-in-before, depth of MANHOLE exc. 1.00 METRE and not exc. 2.00 METRE, complete all as specified and as directed.

All as per Item No. 71 here-in-before, depth of MANHOLE exc. 2.00 METRE and not exc. 3.00 METRE, complete all as specified and as directed.

All as per Item No. 71 here-in-before, d depth of MANHOLE exc. 3.00 METRE and not exc. 4.00 METRE, complete all as specified and as directed.

M&L Cleaning SEPTIC TANK 10 USERS, any Depth by opening Cover, Pumping out Sewage Water and Taking out accumulated Night Soils, Sludges, Brick Bats or any other Items, re-fixing the Cover after cleaning of Septic Tank, removing and carrying Night Soils, Sludges, Brick Bats, etc. to a distance exc. 50.00 Metre but not exc. 100.00 Metre and burried (minimum 50 Cm below Normal Ground Level), Sprinkling Bleaching Powder on deposited Sludges at Earth Pit including Excavating of Earth Pits and Returning, Filling in, Dressing of surplus Soils and providing ground to Slope, etc., (as required /ordered at Site), complete all as specified and as directed.

All as per Item No. 76 here-in-before, SEPTIC TANK 25 USERS, any Depth, complete all as specified and as directed.

All as per Item No. 76 here-in-before, SEPTIC TANK 50 USERS, any Depth, complete all as specified and as directed.

All as per Item No. 76 here-in-before, SEPTIC TANK 100 USERS, any Depth, complete all as specified and as directed.

Cleaning Sewage Line 100mm bore (dia) by Roding from Manhole, Septic Tank, Gully Trap, etc. and Well Flushing with Water, complete all as specified and as directed.

Cleaning Sewage Line 150mm bore (dia) by Roding from Manhole, Septic Tank, Gully Trap, etc. and Well Flushing with Water, complete all as specified and as directed.

Supply only Integral Water Proofing Compound, conforming to IS-2465-1975 and/or as approved, complete all as specified and as directed.

S&F PVC Connection Pipe 15mm in size with PTMT Nuts of length 600mm and fixed, complete all as specified and as directed.

DILIP KUMAR SINGH