Execution of Electromechanical works of Upper Sengulam (1x24 MW) Hydro Electric Project

Spherical valve, of DN 1500mm size and PN 64 pressure with Double seal arrangement, and OPU complete as per specifications

Vertical Francis Turbine suitable to produce 24 MW plus 10% COL at generator terminal at a rated head of 330m and rated speed , complete with runner, Inlet parts, Draft tube distributer assembly, Foundation parts etc as per specifications

PRV of PN64, Fast acting, with actuators, matching discharge capacity, sized for bypass of the turbine flow.

Digital Governor for turbine with Oil Pumping Unit, Accummulator, Direction control valves, Instrumentation and accessories complete as per specifications

PLC based - Unit Control Board, Common control Board, and other PLC based control boards required as per specifications.

SCADA system complete as per specifications

Fibre optic Communication System complete as per specifications

Vertical Synchronous generator , 11 kV, 26.66 MVA plus 10% COL at generator terminals, 50 Hz , 0.9 lag, class F insulation, Naturally air cooled complete with all accessories, 11kv phase and nuetral side CT's and control equipments complete as per specifications

Static Excitation System complete as per specifications with digital AVR and Excitation transformer.

11KV Segregated Phase bus duct complete as per specifications

LAVT Cubicle complete as per specifications

NGT cubicle including NIS, Single phase Neutral grounding transformer, Loading resistor etc. complete as per specifications

11 kV/110 kV, 30 MVA, Power Transformer complete as per specifications

Synchronizing panel complete as per specifications

Generator & GT protection - 1 set, Feeder protection - 2 set, Bus bar protection - 1 set, Bus coupler protection - 1 set, and Other protections (As per clause 1.5 of Volume3 Part 1) and metering system complete as per specifications

110V DC system with 400AH, Lead Acid, Plante type Station Battery -2 Nos, Battery Charger-2 Nos, DC panel, DCDB complete as per specifications

Cooling Water system, Drainage and Dewatering system etc complete with pumps as per specifications

Lubrication system (If required by design) and Compressed air system complete as per specifications

Oil Handling System (Mobile insulating oil filtration system, Portable lubricating oil filtration system) complete as per specifications

Fire protection system for Power House, generators, Transformers & Switchyard complete as per specifications

110 kV Lighning Arrestor complete as per specifications

110 kV CT complete as per specifications

110 kV PT complete as per specifications

110 kV Bus Isolator complete as per specifications

110 kV Isolator with Earth switch complete as per specifications

110 kV SF6 Circuit Breaker (3 pole with all accessories) complete as per specifications

Switch yard structures, towers, insulators, conductors etc. complete as per specifications

Station Grounding system - Power house and switchyard, complete as per specifications

HV & LT Power, Control and Instrumentation Cables and accessories complete as per specifications

11 kV/440V, 500 kVA Unit Auxiliary Transformer complete as per specifications

Supply of Station Service Transformer11/440V 500 KVA complete as per specifications

DG Set 250kVA or higher capacity, complete as per specifications

Electrical Auxilliary system including LTAC system and Uniterrupted Power Supply complete as per specifications

EPBAX system with sufficient telephone lines, cables and all accessories

Power House & Yard lighting complete as per specifications

Air Conditioning & Air Ventillating System complete as per specifications

EOT crane complete 70T/20T (Tentative) , Double Girder, with Pendant control from machine floor ans other electrical accessories, complete as per specifications

Tools, Tackles and Testing Equipments complete as per specifications (Specify in Annexure 5)

Mandatory Spares complete as per specifications (Specify in Annexure 1 )

Recommended Spares complete as per specifications (Specify in Annexure 2 )

Any other item specifically required for the project (Specify in Annexure 3 )

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Erection, testing and commissioning of Spherical valve, of DN 1500mm size and PN 64 pressure with Double seal arrangement, and OPU complete as per specifications

Erection, testing and commissioning of Vertical Francis Turbine suitable to produce 24 MW plus 10% COL at generator terminal at a rated head of 330m and rated speed, complete with runner, Inlet parts, Draft tube distributer assembly, Foundation parts etc as per specifications

Erection, testing and commissioning of PRV of PN64, Fast acting, with actuators, matching discharge capacity, sized for bypass of the turbine flow.

Erection, testing and commissioning of Digital Governor for turbine with Oil Pumping Unit, Accummulator, Direction control valves, Instrumentation and accessories complete as per specifications

Erection, testing and commissioning of PLC based - Unit Control Board, Common control Board, and other PLC based control boards required as per specifications.

Erection, testing and commissioning of SCADA system complete as per specifications

Erection, testing and commissioning of Fibre optic Communication System complete as per specifications

Erection, testing and commissioning of Vertical Synchronous generator , 11 kV, 26.66 MVA plus 10% COL at generator terminals, 50 Hz , 0.9 lag, class F insulation, Naturally air cooled complete with all accessories, 11kv phase and nuetral side CT's and control equipments complete as per specifications

Erection, testing and commissioning of Static Excitation System complete as per specifications with digital AVR and Excitation transformer.

Erection, testing and commissioning of 11KV Segregated Phase bus duct complete as per specifications

Erection, testing and commissioning of LAVT Cubicle complete as per specifications

Erection, testing and commissioning of NGT cubicle including NIS, Single phase Neutral grounding transformer, Loading resistor etc. complete as per specifications

Erection, testing and commissioning of 11 kV/110 kV, 30 MVA, Power Transformer complete as per specifications

Erection, testing and commissioning of Synchronizing panel complete as per specifications

Erection, testing and commissioning of Generator & GT protection - 1 set, Feeder protection - 2 set, Bus bar protection - 1 set, Bus coupler protection - 1 set, and Other protections (As per clause 1.5 of Volume3 Part 1) and metering system complete as per specifications

Erection, testing and commissioning of 110V DC system with 400AH, Lead Acid, Plante type Station Battery -2 Nos, Battery Charger-2 Nos, DC panel, DCDB complete as per specifications

Erection, testing and commissioning of Cooling Water system, Drainage and Dewatering system etc complete with pumps as per specifications

Erection, testing and commissioning of Lubrication system (if requird by design) and Compressed air system complete as per specifications

Erection, testing and commissioning of Oil Handling System (Mobile insulating oil filtration system, Portable lubricating oil filtration system) complete as per specifications

Erection, testing and commissioning of Fire protection system for Power House, generators, Transformers & Switchyard complete as per specifications

Erection, testing and commissioning of 110 kV Lighning Arrestor complete as per specifications

Erection, testing and commissioning of 110 kV CT complete as per specifications

Erection, testing and commissioning of 110 kV PT complete as per specifications

Erection, testing and commissioning of 110 kV Bus Isolator complete as per specifications

Erection, testing and commissioning of 110 kV Isolator with Earth switch complete as per specifications

Erection, testing and commissioning of 110 kV SF6 Circuit Breaker (3 pole with all accessories) complete as per specifications

Erection, testing and commissioning of Switch yard structures, towers, insulators, conductors etc. complete as per specifications

Erection, testing and commissioning of Station Grounding system - Power house and switchyard, complete as per specifications

Erection, testing and commissioning of HV & LT Power, Control and Instrumentation Cables and accessories complete as per specifications

Erection, testing and commissioning of 11 kV/440V, 500 kVA Unit Auxiliary Transformer complete as per specifications

Erection, testing and commissioning of Supply of Station Service Transformer11/440V 500KVA complete as per specifications

Erection, testing and commissioning of DG Set 250kVA or higher complete as per specifications

Erection, testing and commissioning of Electrical Auxilliary system including LTAC system and Uniterrupted Power Supply complete as per specifications

Erection, testing and commissioning of EPBAX system with sufficient telephone lines, cables and all accessories

Erection, testing and commissioning of Power House & Yard lighting complete as per specifications

Erection, testing and commissioning of Air Conditioning & Air Ventillating System complete as per specifications

Erection, testing and commissioning of EOT crane complete 70T/20T (Tentative) , Double Girder, with Pendant control from machine floor ans other electrical accessories, complete as per specifications

Erection, testing and commissioning of Tools, Tackles and Testing Equipments complete as per specifications

Model Testing Charges

Overload test charges for EOT Crane at site

Dynamic short circuit test of Power Transformer

Erection, testing and commissioning of any other item specifically required for the project (Specify in Annexure 4)

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #