8549/E8

Amount

Single Sleeping Bunk of MS 32 mm dia GI pipe and 12 mm thick plywood on top with/without head rest, white colour ( Drg No 01 GE 871 EWS & 02 GE 871 EWS) Removing old unserviceable plywood of single sleeping bunk/charpoy and S&F new marine plywood 1780mm x980mm of 12 mm thick BWR grade, ISI marked, including fixing in position all as shown in drg with suitable size screws & cup washers all as specified and shown on drg and as directed by Engineer-in-Charge. Make: Archid Ply/ century ply/ Green Ply.

Removing old unserviceable stiffner & S&F new stiffener of existing size & shape all as specified and shown on drg and as directed by Engineer-in-Charge.Drg No 01 GE 871 EWS & 02 GE 871 EWS Note:- All Joints shall duly welded/screwed as per Drgs

Removing old unserviceable Long rail and S&F new Long rail of existing size & shape all as specified and shown on Drg No 01 GE 871 EWS

Conversion of long rail obtained from item No 2.03 above into two numbers of short rail after cutting and threading/welding both ends and fixing as per existing members. Drg No 01 GE 871 EWS & 02 GE 871 EWS

Conversion of long rail obtained from item No 2.03 above into two numbers Legs after cutting and threading/welding both ends and fixing as per existing Drg No 01 GE 871 EWS & 02 GE 871 EWS

M&L for preperation of new steel surfaces and applying two coats of synthetic enamelled paint Olive Green over a coat of red oxide primer on frame, Paint should be of Make Asian/Shalimar/Berger approved by GE. Drg No 01 GE 871 EWS & 02 GE 871 EWS

Single Sleeping Bunk made of rectangular/squre pipe with head rest with 12 mm thick plywood fitted on top frame fully painted with brown colour (Drg No 03 GE 871 EWS) Removing old unserviceable plywood of single sleeping bunk/charpoy and S&F new marine plywood of 12 mm thick BWR grade, ISI marked , Make: Archid Ply/ century ply/ Green Ply including fixing in position all as shown in drg with suitable size screws & cup washers all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable stiffener & S&F new stiffener of existing size, shape all as specified and shown on drg and as directed by Engineer-in-Charge. All Joints shall duly welded/screwed as per Drg No 03 GE 871 EWS

Removing old unserviceable Long rail and S&F new Long rail of existing size, shape all as specified and shown on Drg No 03 GE 871 EWS

Conversion of long rail obtained from item No 03.03 above into two numbers short rail after cutting and threading/welding both ends and fixing as per existing Drg No 03 GE 871 EWS

Conversion of long rail obtained from item No 03.03 above into two numbers Legs after cutting and threading/welding both ends and fixing as per existing Drg No 03 GE 871 EWS

Frame Shall be painted with two coats of Olive Green synthetic enamel paint, over a coat of red oxide primer by means of spray painting. Paint should be Make of Asian/Shalimar/Berger approved by GE. Drg No 03 GE 871 EWS

Single sleeping Bunk without head rest made of MS squre pipe 3.2/3.2 mm thick with 12 mm plywood on top white colour (Drg No 04 GE 871 EWS) Removing old unserviceable plywood of single sleeping Bunk/charpoy and S&F new marine plywood of 12 mm thick BWR grade, ISI marked, Make: Archid ply/ century ply/ Green ply including fixing in position all as shown on drg with suitable size screws & cup washers all as specified and shown on drg and directed by Engineer-in-Charge. Drg No 04 GE 871 EWS

Removing old unserviceable stiffener, S&F new stiffener of existing size, shape all as specified and shown in drg and as directed by Engineer-in-charge. All Joints duly welded/screwed as per Drg No 04 GE 871 EWS

Removing old unserviceable Long rail and S&F new Long rail of existing size, shape all as specified and shown in Drg No 04 GE 871 EWS

Conversion of long rail obtained from item No 4.03 above into two numbers short rail after cutting and threading/welding both ends and fixing as per existing Drg No 04 GE 871 EWS

Conversion of long rail obtained from item No 4.03 above into two numbers Legs after cutting and threading/welding both ends and fixing as existing Drg No 04 GE 871 EWS

Frame Shall be painted with two coats of Olive Green synthetic enamel paint over a coat of red oxide primer by means of spray painting. Paint should be Make of Asian/Shalimar/Berger approved by GE. Drg No 04 GE 871 EWS

Single sleeping Bunk without head rest & foot rest made of MS rectanguler/squre pipe alongwith 12 mm plywood on top fully painted with OG colour Drg No 05 GE 871 EWS Removing old unserviceable plywood of single sleeping Bunk/charpoy and S&F new marine plywood of 12 mm thick BWR grade, ISI marked, Make: Archid ply/ century ply/ Green ply including fixing in position all as shown on drg with suitable size screws & cup washers all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable stiffener & S&F new stiffener of existing size, shape all as specified and shown on drg and directed by Engineer-in-charge. All Joints duly welded/Screwed as per Drgs

Removing old unserviceable Long rail and S&F new Long rail of existing size, shape all as specified and shown on drg .

Conversion of long rail obtained from item No 5.03 above into two numbers short rail after cutting and threading/welding both ends and fixing as per existing

Conversion of long rail obtained from item No 5.03 above into two numbers Legs after cutting and threading/welding both ends and fixing as per existing

Frame Shall be painted with two coats of Olive Green paint. Paint should be Make of Asian/Shalimar/Berger approved by GE.

Double sleeping Bunk with head & foot rest made of 32 mm MS pipe 12 mm plywood on both frame Drg No 06 GE 871 EWS Removing old unserviceable Plywood of Double Sleeping Bunk/Charpoy and S&F new marine plywood of 12 mm thick BWR grade in both frame, ISI marked , Make: Archid ply/ century ply/ Green ply including fixing in position all as shown on drg with suitable size screws & cup washers all as specified and shown on drg and directed by Engineer-in-charge.

Removing old unserviceable stiffener & S&F new stiffener of existing size, shape all as specified and shown on drg and directed by Engineer-in-charge. All Joints duly welded/Screwed as per Drgs

Removing old unserviceable Long rail and S&F new Long rail of existing size, shape all as specified and shown on drg .

Conversion of long rail obtained from item No 6.03 above into two numbers short rail after cutting and threading/Welding both ends and fixing as per existing

Removing old unserviceable Legs & S&F new Legs of existing size, shape all as specified and shown on drg and directed by Engineer-in-Charge. All joints duly welded/screwed as per Drgs

Frame Shall be painted with two coats of Olive Green paint. Paint should be of Make Asian/Shalimar/Berger as approved by GE.

Removing old unserviceable nylon shoes and replace with existing size, shape all as specified and shown in drg and directed by Engineer-in-Charge.

Double sleeping Bunk without head & foot rest made of 3.5/3.5 CM & 3.3/3.3 CM MS squre pipe alongwith 12 mm plywood on both frame (Drg No 07 GE 871 EWS) Removing old unserviceable plywood of Double sleeping Bunk/charpoy and S&F new marine plywood of 12 mm thick BWR grade on both frame, ISI marked , Make: Archid ply/ century ply/ Green ply including fixing in position all as shown in drg with suitable size screws & cup washers all as specified and shown on drg and directed by Engineer-in-charge.

Removing old unserviceable stiffener & S&F new stiffener of existing size, shape all as specified and shown on drg and directed by Engineer-in-charge. All Joints duly welded/screwed as per Drgs

Removing old unserviceable Long rail and S&F new Long rail of existing size, shape all as specified and shown in drg .

Conversion of long rail obtained from item No 7.03 above into two numbers short rail after cutting and threading/welding both ends and fixing as per existing

Removing old unserviceable Legs & S&F new Legs of existing size, shape all as specified and shown on drg and directed by Engineer-in-Charge. All Joints duly welded/Screwed as per Drgs

Frame Shall be painted with two coats of Olive Green paint ,Paint should be Make of Asian/Shalimar/Berger approved by GE.

Storage Rack made from 3.1/3.1 mm of MS Squre with 03 Slot & 06 Legs (Drg No 08 GE 871 EWS) Removing old unserviceable stiffener & S&F new stiffener of existing size, shape all as specified and shown in drg and as directed by Engineer-in-charge. All Joints duly welded/screwed as per Drgs

Removing old unserviceable Long rail and S&F new Long rail of existing size, shape all as specified and shown in drg .

Conversion of long rail obtained from item No 8.02 above into two numbers short rail after cutting and threading/welding both ends and fixing as per existing

Removing old unserviceable Legs & S&F new Legs of existing size, shape all as specified and shown in drg and directed by Engineer-in-Charge. All Joints duly welded/screwed as per Drgs

Frame Shall be painted with two coats of Olive Green paint. Paint should be of Make Asian/Shalimar/Berger approved by GE.

Storage Rack made of 50*50*5mm MS angle with 02 Slot & 04 Legs (Drg No 09 GE 871 EWS) Removing old unserviceable stiffener & S&F new stiffener of existing size, shape all as specified and shown on drg and directed by Engineer-in-charge. All Joints duly welded/screwed as per Drgs

Removing old unserviceable Long rail and S&F new Long rail of existing size, shape all as specified and shown on drg .

Conversion of long rail obtained from item No 9.02 above into two numbers short rail after cutting and threading/welding both ends and fixing as per existing members

Removing old unserviceable Legs & S&F new Legs of existing size, shape all as specified and shown on drg and directed by Engineer-in-Charge. All Joints duly welded/screwed as per Drgs

Frame Shall be painted with two coats of Olive Green synthetic enamel spray Paint over a coat of primer. Paint should be of Make Asian/Shalimar/Berger approved by GE.

Almirah Large steel without partition 90X52.5X181.5cm (Drg No 10 GE 871 EWS) Removing unserviceable lock and tighting of loose parts of the locking device and supply and fix new lock 7 lever with duplicate keys all as specified and shown in drawing (Make of Lock- Harison/Godrej/Link)

Removing the existing unserviceable 3 way locking device and S&F new locking device with necessary fittings and painted with two coats of synthetic enamel spray paint of olive green shade of approved quality to match with exiting all as specified and as directed

Removing the existing unserviceable handle & supply and fix 100 mm size new chromium plated steel handle of approved quality make of Godrej all as specified and shown in drawing

Removing the existing unserviceable leg, supply and fix new new leg made of 1mm thick CRCA sheet to match with the existing duly welded/riveted of and painted with two coats of synthetic emamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed

Removing the exisiting unserviceable shelves & supply and fix new shelves made of 1mm thick CRCA sheet to match with the existing duly welded/riveted and painted with two coats of synthetic emamel spray paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed.

Taking down exisiting unserviceable hinges and supply and fix new hinges to match the existing duly welded/riveted and painted with two coats of synthetic emamel spray paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed.

Material and labour for removing the existing dents/bends and preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying two coats of synthetic enamel spray paint of olive green shade over a coat of primer of approved quality both inside and outside all as specified and as directed.

Removing the existing unserviceable hooks, supply and fix new hooks with Nylon Top on Head match the existing all as specified and as directed

Steel Almirah Locker with two Partition 91X48X181.5 CM (Drg No 11 GE 871 EWS) Removing the unserviceable lock and tightening of loose parts of the locking device and supply and fix new lock 7 lever with duplicate keys all as specified and shown on drawing on both compartement (Make Harison/ Godrej/Link)

Removing the existing unserviceable 3 way locking device and S&F new locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green shade over a coat of primer of approved quality to match with exiting all as specified and as directed on both comaprtement

Removing the existing unserviceable handle & supply and fix 100 mm size new chromium plated steel handle of approved quality make of Godrej all as specified and shown in drawing on both compartement.

Removing the existing unserviceable leg, supply and fix new leg made of 1mm thick CRCA sheet to match the existing duly welded/riveted of and painted with one coat of synthetic emamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed

Removing the exisiting unserviceable shelves and supply and fix new shelves made of 1mm thick CRCA sheet to match the existing duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed.

Change/repair the exisiting unserviceable hinges and supply and fix new hinges to match the existing duly welded/riveted and painted with two coats of synthetic emamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed.

Material and labour for removing the existing dents/bends and preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green shade of approved quality both inside and outside all as specified and as directed.

Removing the existing unserviceable hanging rod and supply and fix new hanging rod of SS to match the existing all as specified and as directed in both compartement

Removing the existing unserviceable hooks and supply and fix new hooks with Nylon top on head to match the existing all as specified and as directed in both compartement

Almirah Large Steel with Two Partitons 92.5X48.3X180 Cm (Drg No 12 GE 871 EWS Removing the unserviceable lock and tighting of loose parts of the locking device and supply and fix new lock 7 lever with duplicate keys all as specified and shown in drawing. Make- Harison/Godrej/Link)

Removing the existing unserviceable 3 way locking device and S&F new locking device with necessary fittings and painted with two coats of synthetic enamel paint of olive green shade of approved quality to match with exiting all as specified and as directed

Removing the existing unserviceable handle & supply and fix 100 mm size new chromium plated steel handle of approved quality make of Godrej all as specified and shown in drawing

Removing the existing unserviceable leg, supply and fix new leg made of 1mm thick CRCA sheet to match the existing duly welded/riveted and painted with two coats of synthetic emamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed

Removing the exisiting unserviceable shelves of supply and fix new shelves made of 1mm thick CRCA sheet to match the existing duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed.

S&F in repairs hinges to match the existing duly welded/riveted and painted with two coats of synthetic emamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed.

Material and labour for removing the existing dents/bends of and preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green shade of approved quality both inside and outside complete all as specified and as directed.

Removing the existing unserviceable Hooks, supply and fix new Hooks with Nylon top on head match the existing as specified and as directed

Removing the existing unserviceable hanging rod, supply and fix new hanging rod of stainless steel to match the existing all as specified and as directed on both compartement

Almirah Large Steel with slide drawar and window inside 91X48.3X180 Cm drg No 13 GE 871 EWS ) Removing the unserviceable lock and tighting of loose parts of the locking device and supply and fix new lock 7 lever with duplicate keys all as specified and shown in drawing (Make - Harison/Godrej/Link)

Removing the existing unserviceable 3 way locking device and S&F new locking device with necessary fittings and painted with one coat synthetic enamel paint of olive green shade of approved quality to match with exiting all as specified and as directed

Removing the existing unserviceable handle & supply and fix 100 mm size new chromium plated steel handle of approved quality make of Godrej all as specified and shown in drawing

Removing the existing unserviceable leg and supply and fix new leg made of 1mm thick CRCA sheet to match the existing duly welded/riveted of and painted with one coat of synthetic emamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed

Removing the exisiting unserviceable shelves and supply and fix new shelves made of 1mm thick CRCA sheet to match the existing duly welded/riveted and painted with two coats of synthetic emamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed.

Change/repair the exisiting unserviceable hinges and supply and fix new Hinges match the existing duly welded/riveted and painted with two coats of synthetic emamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed.

Removing the existing unserviceable hooks & supply and fix new hooks with Nylon top on head to match the existing all as specified and as directed

Removing the existing unserviceable hanging rod & supply and fix new hanging rod of stainless steel to match the existing all as specified and as directed on both compartement

Removing the existing unserviceable handle/knob of inbuilt drawar and window and supply and fix new chromium plated steel handle/knob of approved quality all as specified and shown in drawing

Removing the existing unserviceable lock of inbuilt drawar and window and supply and fix new lock 04 lever with duplicate Key made of Harrsion/Link/Godrej of approved quality all as specified and shown in drawing

Material and labour for removing the existing dents/bends and preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying two coats of synthetic enamel paint of olive green shade of approved quality both inside and outside all as specified and as directed.

Locker Bed Side (Drg No 14&15 GE 871 EWS) Removing the unserviceable lock and tightening of loose parts of the locking device and supply and fix new lock 7 lever with duplicate keys all as specified and shown in drawing (Make - Harison/Godrej/Link)

Removing the existing unserviceable 3 way locking device and S&F new locking device with necessary fittings and painted with two coat of synthetic enamel paint of olive green shade of approved quality to match with exiting all as specified and shown on Drg

Removing the existing unserviceable handle & supply and fix 100 mm size new chromium plated steel handle of approved quality make of Godrej all as specified and shown on Drg

Removing the existing unserviceable leg, supply and fix new leg made of 1mm thick CRCA sheet to match the existing duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed

Removing the exisiting unserviceable shelves and supply and fix new shelves made of 1mm thick CRCA sheet to match the existing duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed.

Change/repair the exisiting unserviceable hinges and supply and fix new hinges to match the existing duly welded/riveted and painted with two coats of synthetic emamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed.

Removing the existing unserviceable hanging rod and supply and fix new hanging rod of stainless steel to match the existing as specified and as directed

Removing the existing unserviceable hooks and supply and fix new hooks with Nylon top on head match the existing all as specified and as directed

Material and labour for removing the existing dents/bends and preparation of old painted steel surfaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green shade of approved quality both inside and outside all as specified and as directed.

Table Bed Side 18''X18" (Drg No 16 GE 871 EWS) S&F in repairs first class teak wood leg all as specified and as directed.

S&F in repairs first class teak wood top rail (long/front)

S&F in repairs first class teak wood top rail (short/side)

S&F in repairs top18mm thick pre-laminated MDF board of Make century ply/Grrenply/Archid ply one side laminated alongwith 4mm thick teak wood beading all as specified and as directed.

Preparation of surfaces with sand/emery paper and applying french polish of one or more coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax all as specified and as directed.

Study Table Steel Size 4'X2' Rectangular Frame 44"X18" (Drg No 17 GE 871 EWS) S&F in repairs top of study table steel of 18mm thick prelaminated MDF board as per maching of table of study as per original Pattern duly PVC bidding fitted board 18mm thick prelaminated particle board including 4mm PVC beading. The MDF Board shall be Exterior. Make- Archid ply/Green ply/Kit ply

Removing the existing unserviceable fitted between legs and S&F in repairs side boards 18mm thick prelaminated MDF board including 4mm thick PVC beading as per maching of table of study as per original pattern.The MDF Board shall be Exterior. Make- Archid ply/Green ply/Kit ply

Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of black shade synthetic enamel paint including four Nos of hard rubber shoes. Paint should be of Make- Asian/Shalimar/Berger as approved by GE.

S&F in repairs frame/leg of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. shape complete all as specified and shown on drg .All Joints duly welded/screwed as per Drgs

Charpoy GI pipe ( Drg No FD-220) S&F in repairs long rail made of 32 mm dia GI tubing medium grade ISI marked 1.88 metre long, threaded at both ends and fixing to 3 way 32 mm dia GI elbow of charpoy. (Make : Jindal/Ravindra/Tata)

S&F in repairs 3 way 32 mm dia GI elbow ISI mark

S&F in repairs check nuts of 32 mm dia

Conversion of 32 mm dia long rail obtained from item No 18.1 above into two numbers short rail after cutting and threading both ends and fixing to 3 way 32 mm dia existing elbow.

Conversion of 32 mm dia short rail obtained from item No 18.1 above into two numbers leg including fixing to 3 way 32 mm dia at one end threaded and cover the other end with hard rubber/PVC shoe.

S&F in repairs 12 mm BWR phenol bonded commercial plywood of size 2000 mm x 900 mm including providing 50mm wide strip made out of 6mm thick plywood for filling gap between plywood sheet and short rails including replacement of bolts and nuts for fixing of plywood. Make - kit ply/Green ply/ National.

S&F in repairs MS flat of size 40x4mm with two Nos. nut & bolts as Stiffner shall be fitted for support of plywood

Chair easy (Drg No FD-1108/229) S&F in repairs first class teak wood rear leg

S&F in repairs first class teak wood front leg

S&F in repairs first class teak wood arms

S&F in repairs first class teak wood front/back/side rail of seat as to match with the existing all as specified and directed

S&F in repairs recanning seat & back in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders all as specified and as directed.

Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing one or more coats with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified & directed.

Chair writing (Drg No FD-202/ 250/280) S&F in repairs first class teak wood rear leg all as specified & directed.

S&F in repairs first class teak wood front leg all as specified & directed.

S&F in repairs first class teak wood rear/front/Side rail all as specified & directed.

S&F in repairs first class teak wood arms all as specified & directed.

S&F in repairs first class teak wood back rest all as specified & directed.

S&F in repairs first class teak wood stiffener all as specified & directed.

S & F in repairs canning of seat & back of the chair and recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders all as specified and as directed.

Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing one or more coats with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified and directed.

Bed Hard with Ply top (Drg No FD-246/247) S&F in repairs marine ply of 12 mm thick BWR grade, ISI marked of Make: Archid ply/ century ply/ Green ply with suitable size screws & cup washers all as specified and shown on drg and directed by Engineer-in-Charge.

S&F in repairs head board of size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. All wood incarporated in head board shall be well seasoned hard wood (Teak).Colour/ Shade of vineer sheet to be incarporated in head board shall be as directed by Engg-in-Charge /GE of Make :Archid ply/ century ply/ green ply . All wood surfaces exposed to view shall be two coat of melamine polished of approved shade by GE.

S&F in repairs foot board of bed hard of existing size, shape all as specified and shown on drg and directed by Engineer-in-Charge. All wood incarporated in foot board shall be well seasoned hard wood (Teak). Colour/ Shade of Vineer sheet to be incarporated in foot board shall be as directed by Engineer -in-Charge /GE of Make :Archid ply/ century ply/ green ply . All wood surfaces exposed to view shall be two coats of melamine polished of approved shade by GE.

S&F in repairs long rail of bed hard made of teak wood of existing size, shape all as specified and shown on drg. All wood surfaces exposed to view shall be two coats of melamine polished of approved shade by GE.

S&F in repairs support stiffners & short rail of bed hard of size 40mmx 60mm made of hard wood teak of existing size, shape all as specified and shown on drg and directed by Engineer-in-Charge.

S&F in repairs MS bracket of bed hard 150x35x5mm thick Flat iron "L"shape duly treated with black paint of Make: Berger/ Shalimar/ Asian of existing size, shape all as specified and shown on drg and directed by Engineer-in-charge.

M&L for preparation of old surfaces of bed hard by complete removal of existing treatment using grinding machine including filling of cavities by putty, filler, sealer and applying two coats of melamine polishing to obtain glossy finish all as specified and as directed by Enginner-in-charge.

Chair Dining High Back (Drg No FD-357) S&F in repairs first class teak wood rear leg all as specified and as directed.

S&F in repairs first class teak wood front leg all as specified and as directed.

S&F in repairs first class teak wood rear/front/side rail all as specified and as directed.

S&F in repairs first class teak wood Arms.

S&F in repairs first class teak wood back rest

S&F in repairs first class teak wood stiffener

Providing new Cushion of appropriate size of cool foam complete with dismantling old one with first class raxine as per sample held with GE Make- Sleepwell/Featherfoam

Preparation of sufaces of chair dinning cushioned by throughly rubbing with emery paper, applying raw/burnt seina uniformly from chair dinning and polishing with french polish one or more coat to obtain a glossy finish all as specified and as directed.

MEAT SAFE /Milk Box (Drg No FD-47) Removing of old unserviceable front shutters with wire gauge/side wire gauge and S&F new first class teak wood front shutters with wire guage/sides of wire gauge. Shutter should be fitted with 25mm long butt hinges. Wire guage shall be of 12mm mesh and of 20 gauge. 75mm hasp and staple should be provided to top of shutter. All wood shall be 1st class teak. Two numbers ball spring catch shall be provided to each shutter and one coat of white paint all as per shape and size shown in drawing.

M&L for preparation of old wooden surfaces by scraping with emery paper, cleaning, redusting, making the surfaces smooth and apply primer where ever required and one coat of synthetic enamel white paint of approved make & quality inside and out side of Meat safe and all as specified and as directed by Engr-in-Charge.

S&F in repairs aluminium hasp and staple 75mm long best quality.

S&F in repairs 100mm long aluminium handle of best quality.

Table Writing Wooden (Drg No FD-249, 275,33) Removing the existing unserviceable top of the table writing and S&F new top as to match with existing made out of 18 mm thick pre-laminated MDF board Make of century ply/Grrenply/Archid ply one side laminated finish duly providing 4 mm thick teak wood beading all around all as specified and directed

Removing the existing unserviceable leg of the table writing and S&F the same with new one as to match with existing made out of teak wood all as specified and directed

Removing the existing unserviceable leg (short) of the table writing and S&F the same with new one to match with existing made out of teak wood all as specified and directed

Removing the existing unserviceable side/bottom rail of the table writing and S&F the same with new one to match with existing made out of teak wood and all as specified and directed

Removing the existing unserviceable back of the table writing and S&F the same with new one as to match with existing made out of 6 mm thick plywood commercial and all as specified and directed

Removing the existing unserviceable side of the table writing and S&F the same with new one as to match with existing made out of 18 mm thick MDF board of Make- century ply/Grrenply/Archid ply one side laminated finish all as specified and directed

Removing the existing unserviceable stiffener of the table writing and S&F the same with new one as to match with existing made out of teak wood and all as specified and directed

Removing the existing unserviceable drawer of the table writing and S&F the same with new one to match with existing made out of 18 mm thick MDF board of Make century ply/Grrenply/Archid ply one side laminated finish including provision of knob all as specified and shown on drawing. Note :- Knob shall be be aluminium anodised (Dark Brown) chromium plated of approved size and quality

Removing the old unserviceable complete cupboard from the table writing and S&F new cupboard as to match with existing made of 18 mm thick prelaminated MDF board Make of century ply/Greenply/Archid ply including back provided with 6mm thick commercial plywood all as specified and shown in drawing. Note :- (a) Knob shall be aluminium anodized (dark brown chromium plated of approved size and quality). (b) Hinges shall be 50 mm of approved quality.

M&L for preparation of wooden surfaces of the table writing with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax all as specified.

Table Dressing Gents with mirror ( Drg No FD-379) M&L for remoiving the exising unserviceable looking mirror with frame from Table Dressing Gents with mirror and S&F the same of 5mm thick of appropriate size with frame along with 6mm thick commercial plywood back of the mirror including minor repairs all as specified and directed Note : Make of Mirror should be of Modiguard/St Gobain

M&L for remoiving the exising unserviceable drawer from Table Dressing Gents with mirror and S&F new drawer made of 12mm thick commercial plywood and front side made of 18mm thick pre-laminated MDF board one side laminated finish including provision of knob all as specified and as directed.

M&L for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax for Table Dressing Gents with mirror all as specified and directed.

Table Bed Side (Drg No FD-276) Removing the existing unserviceable top of Table Bed Side and S&F the same made of 18mm thick pre laminated MDF board one side laminated finish including provision of 4mm thick teak wood beading all as specified and directed

Removing the existing unserviceable bottom of Table Bed Side and S&F new bottom made of 18mm thick pre laminated MDF board one side laminated finish including provision of 4mm thick teak wood beading complete all as and as directed

Removing the existing unserviceable back of Table Bed Side and S&F new back made of 12mm thick Commercial Plywood all as specified and directed

Removing the existing unserviceable sides of Table Bed Side and S&F new sides (both) made of 18mm thick pre-laminated MDF board one side laminated finish including provision of 4mm thick teak wood beading all as specified and as directed

Teapoy ( Drg No FD-382/ 232 & 278) Removing the existing unserviceable leg from Teapoy and S&F the same made of first class Teak wood to match with the existing and all as specifed and directed

Removing the existing unserviceable top rail (long/front) from Teapoy and S&F the same made of first class teak wood to match with the existing all as specifed and directed

Removing the existing unserviceable top rail (short/side) from Teapoy and S&F the same made of first class Teak wood to match with the existing all as specifed and directed

Removing the existing unserviceable top from Teapoy and S&F the same with new one as to match with the existing made of 18mm thick pre-laminated MDF board one side laminated with 4mm thick teak wood beading all as specified and directed Make - Archid ply/Green ply/Century Ply

M&L for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax for Teapoy all as specified and directed.

Chair Visitor Steel Cushioned with Arms (TP) Removing old unserviceable back frame from chair visitor/CBA cushioned and supply and fix new back frame complete made of 12 mm thick plywood including moulded PU foam seat duly covered with tapestry cloth complete of existing size, shape, pattern all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable frame and members of steel fix new one of existing size, shape, pattern all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable PVC arms from chair visitor/CBA cushioned and supply and fix new PVC arms of existing size, shape, patternall as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable PVC shoe from Chair visitor/CBA cushioned and supply and fix new PVC shoe of existing size, shape, pattern all as directed by Engr-in-Charge.

Chair Revolving with Arms (TP) Removing old unserviceable hydrolic mechanism and S&F new hydrolic mechanism of aprroved quality

Removing old unserviceable castor wheel and S&F new castor wheel of approved quality as dirceted by GE

Removing old unserviceable hand rest and S&F new one as existing shape and size should be fitted with suitable nut bolt/welding all iron surface directed to view when placed in postion shall be painted with enamel paint using spray machine to match the colour all as specified & directed of approved quality as dirceted by GE

Chair Visitor Cushioned with Arms(Cushioned Rexined) (TP) Removing old unserviceable back frame from chair visitor/CBA cushioned rexined and supply and fix new back frame complete made of 12 mm thick plywood including moulded PU foam seat duly covered with finest quality rexine complete of existing size, shape, pattern all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable frame and members of steel fix new one of existing size, shape, pattern all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable PVC arms from chair visitor/CBA cushioned and supply and fix new PVC arms complete of existing size, shape, pattern all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable PVC shoe from chair visitor/CBA cushioned and supply and fix new PVC shoes of existing size, shape, pattern. All as directed by Engr-in-Charge.

Table vegetable cutting Steel 60" x 25" x 2mm thick removing old unsv table top of and replaced with new table top of existing size 60" x 25" x 2mm thick made of stainless steel all as specified and directed.

Preparation of old painted steel surfaces by scraping with emery paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel spray painting of olive green shade of approved quality.

m/s RC punetha

m/s MD pandey sons