GE/KHU-44/2025-26 REP/REPLACEMENT FENCING, GATES, HARDSTANDING, CHEQUERED/INTERLOCKING TILES CULVERTS, DRAINS AND PROTECTIVE WKS AT HANUTHANG, BATALIK AND BIAMAH, REPAIR/REPLACEMENT OF WOODEN DOORS, WINDOW SHUTTERS, WIRE MESH ETC VARIOUS TEMP

Amount

Dismantling old posts or struts (wood, steel or RCC) embededed in Concrete, brick work, masonry, etc any section, including taking out embedded portion including necessary excavation & prepration of post holes and removal of surplus excavated material from site complete all as specified and directed.

M&L for Cement Concrete type D-2, 1:4:8 using 40mm graded agregate as in foundations, filling and mass concrete complete all as specified and directed.

S&F for mild steel angle, flat iron as in post & strut including cutting tops to shape, drilling holes, notching for wire, incl flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and nosing to steps including embeding in concrete etc or similar work conforming to Fe 290 Gde 165 complete all as specified and directed.

Dismantling of fencing wire mesh barbed wire,chain link etc, complete all as specified and directed.

Supply only Galvanized chain link fencing of any size any type confirming to relevent IS including line wires, any mesh, size and type, fixed to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed.

Fixing only chain link fencing including line wirers ,any mesh any type of standerds,rails ,straining bolts etc including provn of binding wire complete all as specified

S&F in repair Mild steel Round bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specifierd and directed

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed.

M&L for prepration of new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint (finising coat) over one coat of primer ot steel surfaces complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick cement concrete type E-2 1:5:10 (40mm graded aggregate) as in sub base to floor, in foundation or mass filling or similar works complete all as specified and directed.

M&L for 25 mm thick sand cushioning under floors complete all as specified and directed.

M&L for 60mm thick machine pressed precast concrete interlocking paver blocks of any shape and size of M-35 grade confirming to IS 15658 - 2006 filled with grey cement and pigment

M&L for 100 mm thick cement concrete type D-2 1:4:8 (40mm graded aggregate) as in sub base to floor or for laying of floor finishes or similar works complete all as specified and directed.

M&L coloured chequered cement concrete tiles of size 300mm x 300mm x 20 mm, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors thick laid over and including 20 mm thick screed bed in CM 1:4 bedded and jointed in neat cement slurry complete all as specified and directed.

M&L for 150 mm thick Cement concrete work type B-1 (1:2:4) (using 20mm graded aggregate) for pavement/ hardstanding and flooring or similar works finished even and smooth without using extra cement including necessary form work complete all as specified and directed.

M&L for 100 mm thick Cement concrete work type B-1 (1:2:4) (using 20mm graded aggregate) for pavement/ hardstanding and flooring or similar works finished even and smooth without using extra cement including necessary form work complete all as specified and directed.

M&L for forming Contraction (Dummy) joints 65mm deep x 10 mm wide, filled with sealing compound, Grade 'A' complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm each (w/o taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames n.exc 1.5 Sqm each (w/o taking off shutters from the frames) complete all as specified and directed.

Taking down Shutters of any description n exc 1 sq. m each complete all as specified and directed

Taking down Shutters of any description exc 1 sq. m but n.exc 2 Sqm each complete all as specified and directed

S&F Second class softwood plain , solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered , put together with glue pinned at joints supplied and fixed complete all as specified and directed.

S&F second class soft wood 35 mm thick plain framed panelled shutters (any numbers of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with commercial face veneers,supplied and fitted to chowkats complete all as specified and directed.

S&F 30 mm thick second class soft wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

M&L for two coat of synthetic enamel paint (finishing coat) over one coat of pink primer to new wooden surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified and directed.

S&F 100 mm size mild steel butt hinges, medium weight cold rolled (including fixing with nails/screws or welded as required) complete all as specified and directed.

S&F 75 mm size mild steel butt hinges, medium weight cold rolled (including fixing with nails/screws or welded as required) complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed.

S&F in stainless steel wire cloth 0.36mm normal dia of wire and average with apparture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.

S&F Aluminium door window frame for door,window / ventilaror/partitions with one or more rebate including joining cleat for fixing etc, complete all as specified and directed.

S&F Anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles (150 mm) 02 Nos in each door, hinges (100 mm ) 03 Nos each door, anodised aluminium snap beading, screws, etc complete all as specified and directed by Engr-in-charge.

S&F 5.5 mm thick ordinary quality glass sheet in squares n exc 0.5 sqm in each pane fixed to door/windows for glazing with and including oil putty or aluminium beads and rubber packing complete all as specified and directed.

M&L prelaminated particle board 9 mm thick interior grade, prelaminated both side with decorative lamination, fixed in aluminium frame complete all as specified and directed.

S&F 100 mm aluminium anodised barrel tower bolt of extruded section and fixed.

S&F Aluminium alloy anodised sliding door bolt with hasp staple ( bolt type ) 250mm long , staple (bolt type) and fixing bolt with and sliding bolts of extruded sections or cast-aluminum alloy and fixed.

S&F 150 mm aluminium anodised barrel tower bolt of extruded section and fixed.

S&F 150 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100 mm extruded aluminium alloy handles, fabricated type , anodised complete all as specified and directed.

S&F in replace switch piano flush type 05 Amps , 230 volt , 50 Hz one way, ISI marked complete all as specified and directed.

S&F in replace switch piano flush type 16 Amps , 230 volt , 50 Hz one way, ISI marked complete all as specified and directed.

S&F in replace socket outlet 2 in 1 three pin 05 Amps flush type, 230 volt , 50 Hz ISI marked complete all as specified and directed.

S&F in replace socket outlet 2 in 1 three pin 06/16 Amps , 6 pin flush type , 230 volt , 50 Hz ISI marked complete all as specified and directed.

S&F in replace Switch socket combination, flush type 6A/16A, 5 in 1 , 230 volt, 50 Hz complete all as specified and directed.

S&F in replace Switch socket combination, flush type 6Amps, 5 pin 230 volt, 50 Hz complete all as specified and directed.

S&F in replace Batten holder PVC/ poly carbonate typen with cord grip complete all as specified and directed .

S&F in replace Bell electronic ding dong AC 230Volts 50 Hz all as specified and directed.

S&F in repair bell push flush type single pole one way 5 amp , 230V, 50 Hz all as specified.

S & F in replace Ceiling rose 3 terminals complete all as specified & directed

S&F in replacment of decorative ultra slim polycarbonate LED 4 feet long 20/22 watts ,very high efficiency suited for T-8 tube luminare with system efficacy 110 lumen per watts ,and lumen package >= 2200 lumen , THD< 10 % high quality poly carbonate end cap in white finish and snap fitted to the housing, inbuilt driver incl copper connecting wire three core of suitable size upto connctor of ceiling rose complete all as specified and directed. .

S&F in replacement of wall mounted 10 watts LED batten 2 feet long comprising extruded aluminium heat shrink provided for efficient heat dissipation and integrated lectronic driver with aluminium housing , system efficiency of 110 lumen per watts and lumen package >= 1100 lumen , THD< 10 % incl copper connecting wire three core of suitable size upto connctor of ceiling rosecomplete all as specified and directed.

M&L for replacing LED bulk head fittings 1x9 W/ 1x 10W luminare incl LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F warm white/ white LED luminaire 600X600 mm,35/36 watt,220V recessed type lumen output >= 122 lumen per watts , THD < 10% environmental friendly , new generation , aesthetically designed , ultra modern with high brightness SMD LEDs as light source incl inbuilt drivers with high efficiency PMMA diffuser soft glare free light complete suitable for roof ceiling including connecting up with three core flexible copper conductor of suitable size all as specified and directed.

S&F in replacing distribution board double door made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 12 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 250 volts, flush to wall / fixed on surface incl making good of surface complete all as specified and directed incl taking down old one

S&F in replace distribution board double door made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 8 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 250 volts, flush to wall / fixed on surface complete incl making good all as specified and directed.

S&F in replacing distribution board double door made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 4 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 250 volts, flush to wall / fixed on surface complete all as specified and directed incl taking down old one

S&F in replacing distribution board double door made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 2 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 250 volts, flush to wall / fixed on surface complete all as specified and directed incl taking down old one

Material and labour for attending any complaints like MCB trip/burnt, wiring short circuit, sumain wiring not getting continuity, earth wire brocken at any type on call complete all as specified and directed. Note 1 : Minor matrerials like wires , themble, connectors, nut , bolt and screws deemed to be included in the quoted rates , but all major items will be measured and paid as per relevent sch items . Note 2 : Location of complaints comprising areas including Lamayuru, Khaltsi, Achinathang, hanuthang ,Biamah and Batalik Note3 : Tool and plants incl transportation demed to be included in the quoted rate .

S&F in replacement MCB DB TPN double door 4 way three phase 415 volts , 50 Hz complete all as specified and directed and directed.

S&F in replacement of MCB TPN 40 to 100 Amps , 415 volts, 50 Hz complete all as specified and directed

S&F in repair MCB SPN 32 Amps,10 KA, 240 volt C curve IP 20 complete all as specified and directed incl taking down old one

S&F in repair MCB SPN 40 to 63 Amps,10 KA, 240 volt C curve IP 20 complete all as specified and directed incl taking down old one

S&F in repair MCB single pole, 6 to 32 Amp 240 volt C curve 10 KA breaking capaity complete all as specified and directed incl taking down old one

M&L for replacing unsv fan motor of PVC air freshner 250/200 mm sweep complete all as specified and directed.

All as per item No 25 here in above but of size 300 mm complete all as specified and directed.

Material and labour for replacing fan blade PVC type for 250/300 mm sweep PVC air freshner complete all as specifed and directed.

Material and labour for replacing louvers PVC type for 250/300 mm sweep PVC air freshner complete all as specifed and directed.

Material and labour for rewinding exhaust fan motor 300 mm Metallic type with copper wire of same gauge incl taking down of ex fan from situ, opening the fan assembly, removing the motor and taking to workshop for winding and taking back and assembling the the same incl fixing in original location all as specified and directed. Note: Minor items such as screws, washers, connecting wires deemed to be included in the quoted rate.

Material and labour for replacing Metallic louver assebbly suitable for 300 mm sweep metallic exhaust fan complete all as specifed and directed.

M&L for themble copper 10 to 16 sqmm complete all as specified and directed.

M&L for themble aluminium 16 sqmm complete all as specified and directed.

M&L for themble aluminium 25 sqmm complete all as specified and directed.

M&L for themble aluminium 35 sqmm complete all as specified and directed.

M&L for themble aluminium 50 sqmm complete all as specified and directed.

M&L for replacing copper wire FRLSH multistranded of size 1.5 sqmm single core complete all as specified and directed.

M&L for replacing copper wire FRLSH multistranded of size 2.5 sqmm single core complete all as specified and directed.

M&L for replacing copper wire FRLSH multistranded of size 4.0 sqmm single core complete all as specified and directed.

M&L for replacing copper wire FRLSH multistranded of size 6.0 sqmm single core complete all as specified and directed.

M&L for nut bolt and washers as per sample required for building security light clamps complete all as specified and directed.

M&L for replacing service wire 1100 volt grade heavy duty cable PVC insulated aluminium conductor , served with inner sheathing of PVC tape and overall PVC sheathed in service connection two core 16 sqmm flat or circular complete all as specified and directed.

M&L for replacing PVC casing and caping 20 mm size , ISI marked complete incl screws and fixing accessories all as specified and directed

M&L for replacing PVC conduit 20 mm size , ISI marked complete incl screws and fixing accessories all as specified and directed

M&L for PVC squre box for fixing ceiling rose complete all as specified and directed.

M&L for PVC round block for junction / fixing ceiling rose complete all as specified and directed.

M&L for replacing 3 core copper flexible cable 1.5 sqmm PVC sheathed FRLS complete all as specified and directed .

M&L for replacing 3 core copper flexible cable 2.5 sqmm PVC sheathed FRLS complete all as specified and directed .

S&F LED building security light fitting 30 watts made of pressure diecast aluminium housing with acrylic cover as diffuser with IP65 and IK -07 protection , THD<10%, lumen output >= 110 lumen per watts with integrated lectronic driver incl copper connecting wire three core of suitable size upto connctor of ceiling rose complete incl GI mounting pipe of building security lights of size 32 mm to 40 mm size upto 1.2 mtr length bend into sizes incl mounting clamps made of MS flat saddles, nut bolt and washers all as specified and directed .all as specified and directed.

S&F in replacing GI mounting pipe of building security lights of size 32 mm to 40 mm size upto 1.2 mtr length bend into sizes incl mounting clamps made of MS flat saddles, nut bolt and washers all as specified and directed .

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion (for building earthing)

S&F 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor ,served with inner sheathing of PVC tape and overall PVC sheathed in service connections two core of size 10 sq mm flat or circular complete all as specified and directed

Deduct Credit for Demolished/Dismantled material Rs (-) 124459.00 (Minus) as listed in Schedule 'A' Sec-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.

TSEWANG DORJAY (BID ID -3321781)

M/S NANCY ENTERPRISES (BID ID -3321802)

M/S UNITED CONSTRUCTION CO. (BID ID -3321884)

M/S SONAM angchok (BID ID -3321934)

M/S SONAM NAMGIAL (BID ID -3322225)

MEDHI ALI GRONGPA (BID ID -3322297)