REPAIR/PAINTING/POLISHING OF ALMIRAH STEEL LOCKER STEEL AND ALL TYPE OF TABLE (WOODEN/STEEL) AND REPAIR OF CHARPOY INCLUDING POLISHING/PAINTING ETC AT FURNITURE YARD AT BADDOWAL UNDER GE LUDHIANA

Amount

ALMIRAH LARGE/ MEDIUM STEEL S&F for the following parts of Almirah steel including taking out the old parts, cutting/welding turning, drilling bending to required shape etc complete as per drawing or as specified & directed by Engineer-in- charge. Drg No FD-1031,1032,1033,1034 & FD/E6/MAP/18

Mild steel lock 65mm size with key in duplicate

Mild steel chromium plated handle 100mm long.

LOCKER BED SIDE STEEL S&F for the following parts of Locker steel including taking out the old parts, cutting/welding turning, drilling bending to required shape etc complete as per drawing or as specified & directed by Engineer-in- charge. Drg No FD-1029

Hasp and Staple

Mild steel chromium plated handle 100mm long.

REPLACEMENT OF PLYWOOD FOR CHARPOY GI PIPE PLYTOP: M&L for removal of unsv Plywood from charpoy GI pipe and fixing new 12mm thick Plywood BWR grade with fully threaded nuts (75mm long 6mm dia) and bolts with washers on both sides 3 Nos in each long rail and 2 Nos in each short rail including rounding off the corners of plywood complete as per drawing or as specified & directed by Engineer-in- charge. Drg No FD-220

REPAIR OF CHARPOY GI PIPE: Drg No FD-220

Supply and replacement of long rail made out of 32mm dia medium grade galvanised pipe including (welding / threading )

Labour for removal of unsv short rail from frame of Charpoy GI pipe & fixing of short rail made out of unserviceable long rail 4.01 above after cutting & threading both ends to required size to make two short rails.

Labour for removal of unsv leg from frame of Charpoy GI Pipe & fixing leg made out of unserviceable short rail 4.02 above after cutting & threading both ends to required size to make two legs.

S&F for three way GI elbow 32mm dia suitable for charpoy GI pipe.

S&F for check nut GI 32 mm dia suitable for charpoy GI pipe complete all above as per drawing & as specified and directed by Engr-in-Charge.

TABLE 900MM x 600MM x 760MM WITH & WITHOUT DRAWERS M&L for providing top made out of pre-laminated particle board 18mm thick exterior grade with 4mm thick teak wood beading around the top complete as per drawing & as specified & directed by Engineer-in- charge. Drg No FD-224, 283 & 284

TABLE BED SIDE M&L for providing following parts of Table bed side including dismantling & removing of old unsv parts from the frame complete all as per drawing & as specified & directed by Engineer-in- charge. Drg No FD/E6/MAP/15R

Table top made out of pre-laminated particle board 18mm thick exterior grade with 4mm thick teak wood beading around the top

Table Bottom made out of pre-laminated particle board 18mm thick exterior grade with 4mm thick teak wood beading around the top .

Table side made out of pre-laminated particle board 18mm thick exterior grade with 4mm thick teak wood beading around the top

Mild steel powder coated handle100mm long for drawer.

Back side fixed with 6mm thick commercial plywood with headless nails.

Drawer made out of 12mm thick commercial Ply Wood and front of drawer made out of pre-laminated particle board 18mm thick exterior grade

Telescopic stainless steel channel for suitable size as required and PVC shoe on the leg of Table.

TABLE WRITING M&L for top made out of 18 mm thick pre-laminated particle board exterior grade with 4mm thick teak wood beading around the top complete as per drawing & as specified & directed by Engineer-in- charge. Drg No FD-275

TABLE OFFICE CLERK STEEL S&F following parts of Table office clerk including taking out the old parts, cutting/welding turning, drilling bending to required shape etc complete as per drawing or as specified & directed by Engineer-in- charge. Drg No FD-84M, FD-1004

Lock 6 lever of brass with two keys

Table top made out of 18 mm thick pre-laminated particle board exterior grade with 4mm thick teak wood beading around the top complete.

TABLE OFFICE OFFICER STEEL S&F for the following parts of Table office officer including taking out the old parts, cutting/welding turning, drilling bending to required shape etc complete as per drawing & as specified & directed by Engineer-in- charge. Drg No FD-84M, FD-1003

Mild steel lock 65mm size with key in duplicate.

Table top made out of 18 mm thick pre-laminated particle board exterior grade with 4mm thick teak wood beading around the top fixed with nails.

TABLE 900MMx600MMX760MM STEEL WITH OR WITHOUT DRAWER: Supply and replacement of table top made out of 18 mm thick pre-laminated particle board exterior grade with 4mm thick teak wood beading around the top fixed with nails complete as per drawing or as specified & directed by Engineer-in- charge. Drg No FD-1007 & 1008

TABLE 900MMx900MMx760MM STEEL S&F in replacement Table top made out of pre-laminated particle board 18mm thick exterior grade with 4mm thick teak wood beading around the top fixed with nails complete all as specified & directed by Engineer-in- charge. Drg No FD-1009

TABLE DINNING FOR 4 PERSONS M&L for providing top made out of pre-laminated particle board 18mm thick exterior grade with 4mm thick teak wood beading around the top fixed with nails complete all as specified & directed by Engineer-in- charge. Drg No FD/MAP-II/03

TABLE DINNING FOR 6 PERSONS M&L for providing top made out of 18 mm thick pre-laminated particle board exterior grade with 4mm thick teak wood beading around the top fixed with nails complete as per drawing or as specified & directed by Engineer-in- charge. Drg No FD-273, FD/MAP-II/03

TABLE CENTRE M&L for providing following parts of Table Centre including dismantling & removing of old unsv parts from the frame including French polishing with one or more coats table complete as per drawing or as specified & directed by Engineer-in- charge. Drg No FD-274

TABLE PEG M&L for providing following parts of Table Peg including dismantling& removing of old unsv parts from the frame including French polishing with one or more coats table complete as per drawing or as specified & directed by Engineer-in- charge. Drg No FD-277

TEAPOY M&L for providing following parts of Teapoy including dismantling & removing of old unsv parts from the frame including French polishing with one or more coats tablecomplete all as specified & directed by Engineer-in- charge. Drg No FD-278 & 382

TABLE COMPUTER:- Supply and replacement of the top made of 18mm thick block board with 0. 8 mm thick teak face lamination sheet teak wood beading around the top 4mm thick fixed with nails and following components complete as per drawing or as specified & directed by Engineer-in- charge. Drg No FD/E6/MAP/01

Teliscopic channels for table.

S&F Knob for Table computer/Table Dressing Gents/Ladies/Table Writing/ Table 900x600x760mm with drawer.

PAINTING TO STEEL FURNITURE Paint with one or more coats on steel furniture mentioned below all as specified & directed by Engineer-in-charge

Almirah Large Steel. Drg No FD-1031, 1033, FD/E6/MAP/18

Almirah Medium Steel. Drg No 1032 & 1034

Locker Bed Side Steel, Drg No FD-1029

Table Office Officer Steel. Drg No FD-84 & 1003

Table Office Clerk Steel. Drg No FD-84 & 1004

Table 900x600x760mm without / with Drawer. Drg No FD-1007 & 1008

Table 900x900x760mm. Drg No FD-1009

FRENCH POLISH TO WOODEN FURNITURE French polish with one or more coats on table frame and four PVC shoe on the leg of Table all as specified & directed by Engineer-in- charge.

Table 900x600x760mm, Drg No FD-283 & 284

Table Writing. Drg No FD-275

Table Bed Side. Drg No FD/E6/MAP/15R

Table Dining For Six. Drg No FD-273, FD/MAP-II/03

Table Dining For Four. Drg No FD/MAP-II/03

Table Peg. Drg No FD-277

Table Center. Drg No FD-274

Teapoy. Drg No FD-278 & 383

JAY ANN CONSTRUCTION COMPANY

shivam builders

M/S Pee Kay Builders

M/s Surjit Singh and bros

M/s Vishant Construction Co

B.L. Chaudhri and Co.

M/s Sarup Singh