MAKING VEHICLE SHADE PARKING IN CIRCLE/DIVISION OFFICE AND NEAR CONTROL ROOM BUILDING AT 400KV SUBSTATION RISHIKESH

Amount

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. In Ordinary soil/earth mixed with boulders.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources).

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing at all heights, levels and locations Aluminium profile industrial troughed sheet of Alloy 31500/31000/40800, conforming to IS 1254, IS 737, IS 2676. The sheet shall be fixed using self drilling/self tapping SS screws of size 5.5x65 mm with EPDM seal complete upto required pitch in horizontal, vertical or curved surfaces i/c cutting to size and shape where required as per pecifications, detail drawings and direction of Engineer-in-Charge. The rate shall be inclusive of all screws, seal, ridge, labour, scaffolding, machinery for fixing and approved sealent where required etc. but excluding the cost of purlins, rafters and trusses. 0.91 mm thick, the profile detail width 1044/920 mm, cover width 1000/875 mm. (DSR-2023, 26.19)

Grouting and fixing work of fabricated structure steel complete work making space by removing material, dig up the pit of size as per requirement in flooring, grouting of legs & horizontal support in 1:2:4 ratio of CC, etc including cost of labourr, T&P & material etc.

Painting work with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on each side of all fabricated structure etc: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providing and fixing of best quility 40 Watt energy efficient water proof LED flood/ street lights with Aluminum die cast body 90-300 volts 50 Hz includes the work of proper fixing through bend pipe and clamps/ welding etc and electrical wiring with all wiring materials complet in all respects with proper illumination

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement: 4 coarse sand)

12mm cement plaster of mix: 1:4 (1 cement : 4 coarse sand)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

M/s VEERPAL SINGH CONTRACTOR