REPAIR MAINT OF INTERNAL ELECTRIC FITTING INCLUDING BUILDING SECURITY LIGHTS TPN DB S ETC IN POCKET 1 TO 4 AT ROORKEE AND PURKAZI UNDER GE ROORKEE AND REPAIR MAINT OF CEILING FAN EXHAUST FAN WALL COOLING APPLIANCES AND ALLIED WORKS OF ROORKEE CANTT A

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete incl fixtures and fittings suze as swithes, ceiling rose, pendant, regulator, ssockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (Credit for above items should be as per conditions separately) and making good disturbed surfaces of walls, floors etc

M & L Point wiring with 1.5 Sqmm(Nominal area) PVC insulated and PVC unsheathed FRLS multi stranded copper conductor single core cable drawn through and including PVC non metallic conduit of 20 mm dia ISI marked in concealed conduit with complete accessories,including sunk mild steel 1.6 mm thick terminal boxes with 3 mm thick bakelite sheet top cover ISI marked complete including PVC insulated and unsheathed single core multistranded copper conductor cable of size 1.5 sqmm green in colour as earth continuity conductor connected to common earth and earth dolly ,making good surface with white wash or any type distemper as per existing colour of building complete all as specified and directed for the following :- Make of Cable- Havells /policab/Finolex/Grandley, Make of PVC conduit -Plaza /Kalinga/Polycab

(a) One light point controlled by one one way switch

(b) One fan exhaust fan point controlled by one one way switch

(c) One bell/buzzer point controlled by one push button

(d) One 3/5 pin socket outlet 5 Amp on the same board with other swithes.

(e) One 3/5 pin 5 Amps socket outlet on indepandant board.

(f) One 3/5 pin 5 Amps socket outlet indepandant but below the switch board in the vertical plane.

(g) One light point controlled by two two way switches

All as per BOQ item No 2.00 above here in before but wiring in existing conduit for the following :-

(a) One light point controlled by one one way switch

(b) One fan point controlled by one one way switch and fan regulator

(c) One bell/buzzer point controlled by one push button

(d) One 3/5 pin 5 Amps socket outlet on indepandant board.

All as per BOQ item No 2.00 above here in but with 2.5 Sqmm (nominal area) FRLS cable PVC for the 15 Amp 3/5 pin socket power point including 1.5 Sqmm copper conductor green as colour for earth contineuity all as specified.

All as per BOQ item No. 2.00 above here in but in existing conduit with 2.5 Sqmm (nominal area) FRLS cable PVC for the 15 Amp 3/5 pin socket power point including 1.5 Sqmm copper conductor green as colour for earth contineuity all as specified.

Taking down old sub main wiring and S & F Sub main wiring with two runs of single core FRLS PVC insulated and unsheathed multistranded, copper conductor cable of size 4.0 sqmm LT, 1100V grade, down trhough and incl adequate sizes PVC non metallic conduit of 20mm/approprite dia with accessories and fittings and one run of 4.0 sq mm single core multi stranded copper conductor cable as earth continuity conductor. Two runs of cable one run of earth wire and one run of PVC non metallic conduit of 20mm/approprite dia shall be measured as one run length, Cable required for connection to DBs shall deemed to be incl and shall not be measured separately. Earth wire shall run inside the conduit pipe (Note :- Extra length of cable required for connection to MCBs shall deemed to be included in unit rate.) Make of Cable- HPL/Havells /policab/Grandley, Make of PVC conduit - Kinjal/atul/plaza Plast/Kalinga

All as per BOQ item No 17 here in before but 6.00 Sqmm copper conductor and 6.0 Sqmm as earth continuity conductor complete all as specified.

All as per BOQ item No 17 here in before but 10.00 Sqmm copper conductor and 10.0 Sqmm as earth continuity conductor complete all as specified.

S&F switch piano flush type polycarbonate single pole one way 5 Amps.Make: Havells / Anchor (Penta) /Legrand”

S&F switch piano flush type polycarbonate single pole one way 15 Amps.Make: Havells / Anchor (Penta) /Legrand”

S&F switch piano flush type polycarbonate single pole two way 05 Amps.Make: Havells / Anchor (Penta) /Legrand”

S&F socket outlet polycarbonate 2 in 1, 3 pin 5 Amps flush type.Make: Havells / Anchor (Penta) /Legrand”

S&F socket outlet polycarbonate 2 in 1, 3 pin 5/15 Amps flush type.Make: Havells / Anchor (Penta) /Legrand”

S&F bell push flush type 5 Amps. Make: Havells / Anchor (Penta) /Legrand”

M&L for Ceiling rose in poly carbonate 3 terminal brass flush type 6 Amps,250 volts AC ISI marked, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete all as specified and directed. Make: Havells (ROHS)cat part No . AHLHXCW000 or equivalent in Anchor (Penta) /Legrand”

S&F electronic fan regulator 230 volts , step type (5 step) socket type ,hum free 100/300 watt complete all as specified and directed. Make: Anchor(Penta)/Havells(REO)/ Legrand

Supply & Fixing Angle holders (metal ring) PVC / polycarbonate type with back plate, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete with LED bulb 12 watts all as specified and directed. Make: Havells(ROHS) cat part No AHLHXAW000 or equivalent in Anchor( Panta)/ Legrand”

S & F In replacement of old unserviceable light fittings LED tube light fitting 1x20 Watt industrial batten patti type with bipin holders connector block complete with all accessories internally prewired and incl connecting up three core single wire incl 01 no. 20 watt retrofit LED tube rod T8 polycabonate to be fixed at any height of wall/ceiling complete all as spd and directed . Make : C&S cat part No. LTDC1220WLED/WD or equivalent in Havells/Philips//Wipro

S & F In replacement of old unserviceable light fittings LED tube light fitting 1x10 Watt industrial batten patti type with bipin holders connector block complete with all accessories internally prewired and incl connecting up three core single wire incl 10 watt integral LED tube rod T5 polycabonate complete all as spd and directed. Make : C&S cat part No. LTTB2F10WLED/W or equivalent in Havells/Philips/Wipro

S & F In replacement of old unserviceable Building security light fitting versatile pressure die-cast aluminium with high power LED 25 W as light source complete with LED 25 W 5000K including brackets made out of GI pipe light grade pipe bent to shape incl 02 Nos MS flate clamps incl nut bolts connection complete all as spd and directed .Make : C&S cat part No. LTESSE25WLED or equivalent model in Havells/Wipro/Philips

S & F In replacement of old unserviceable bulk head light fittings with new LED bulk head ip 65 with prismatic diffuser 1x10 Watt including LEB bulb 10/12 watts white complete with all accessories internally prewired and incl connecting up three core single wire complete all as spd and directed . Make : C&S cat part No. CG80IB10WLED or equivalent model in Havells/Philips/Wipro

S & F in replacement of old unserviceable recesss mounting light fitting 2' x 2' of capacity 36 Watts powder coated white CRCA full glow suitable for 600 x600 mm POP false ceiling including making electrical connection from ceiling rose to light fittinf complete all as per C&S Cat . LTCRP36WLED2X2 or any equivalent model in Havells/Philips/Wipro.

S & F in replacement of old unserviceable recesss mounting light fitting 1' x 1' of capacity 18 Watts powder coated white CRCA full glow suitable for 300 3600 mm POP false ceiling including making electrical connection from ceiling rose to light fitting complete all as per C&S Cat . LTCRP18WLED1X1 or any equivalent model in Havells/Philips/Wipro.

S & F in replacement of old unserviceable LED backlite panel light fitting 1' x 4' of capacity 36 Watts powder coated white CRCA full glow suitable for POP false ceiling including making electrical connection from ceiling rose to light fitting complete all as per C&S Cat . LTCRP36WLED1X4 or any equivalent model in Havells/Philips/Wipro.

S & F in replacement of old unserviceable LED Highbay light fitting 100 watt capacity with PDC aluminium with reflactor including making electrical connection from ceiling rose to light fitting complete all as per C&S Cat .LTEHB100WHPLED/LS or any equivalent model in Havells/Philips/Wipro.

S & F in replacement of old unserviceable LED Flood light fitting 50 watt capacity with SMD LED pressure die-cast aluminium housing with reflactor including making electrical connection from ceiling rose to light fitting complete all as per C&S Cat .LTEFR50WHPLED fLOOD lIGHT or any equivalent model in Havells/Philips/Wipro. Note for Item No 26 & 27 :- The Quoted rate is deemed to be included for installation of light fitting at any height including necessary T & P and safety equipments.

S & F in replacement of old unserviceable LED Post Top Lantern light fitting 40 watt capacity with tranperent diffuser and fixing arrangement on GI Pipe light grade of dia 40 mm duely grouted on wall/brick pillar complete all as specified and directed at siteand electrical connection from junction box to light fitting complete all as per C&S Cat .LTGLC40WHPLED/W or any equivalent model in Havells/Philips/Wipro.

S & F In replacement of old unserviceable Distribution board (DB) made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 8 way IP 43 (double door) with 200 Amps rated copper bus bar neutral bar ,earth bar ,single pole and neutral 250 volts ,flush to wall complete all as specified and directed MAKE-LEGRAND/C&S/ABB/IndoAsian

S & F In replacement of old unserviceable Distribution board (DB) made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 4 way IP 43 (double door) with 200 Amps rated copper bus bar neutral bar ,earth bar ,flush to wall complete all as specified and directed .MAKE-LEGRAND/ABB/C&S/IndoAsian

S & F In replacement of old unserviceable Distribution board (DB) made out of sheet metal enclosure (CRCA sheet) dust and vermin proof TPN 4 way IP 43 (double door) with 200 Amps rated copper bus bar neutral bar ,earth bar ,triple pole and neutral 415volts ,flush to wall complete all as specified and directed. MAKE-LEGRAND/ABB/C&S/IndoAsian

S & f in replacement of unserviceable TPN DB- VTPN for independent mounting fixed on wall duely flush mounted, 4 way, IP 43, IK 09 with 250 Amp Bus bar Make : C & S cat part No . CSDBMCCB125PDD04S or any equivalent model in ABB/ Havells/Legrand/IndoAsian

S & F in replacement of unserviceable MCCB 100 Amp four pole, 415 volt, 25kA adjustable thermal ans manetic setting including necessary connection complete all as specified and directed by Engr-in-Charge. Make: : Legrand cat part No.420013 or equivalent model in ABB/C&S

S & F In replacement of old unserviceable MCBs single pole,6 to 32 Amp 240 volt C-curve 10 KA, MAKE-LEGRAND/ABB/C&S

S & F In replacement of old unserviceable MCBs single pole and neutral, 6 to 32 Amp 240 volt C-curve 10 KA, MAKE-LEGRAND/ABB/C&S

S & F In replacement of old unserviceable MCBs ISI marked 415 Volt, 50 Hz, four pole 63 Amps, breking capacity 10 KA. MAKE-LEGRAND/ABB/C&S

S&F in replacement of old unserviceable ELCB/RCCB fixed to MCB DB of any size suitable for single phase AC supply of capacity 32 Amps 30mA complete as per C&S Cat No. CSRB2P32A30 or any equivalent model in Havells/Legrand/ABB

S & F In replacement Single pole and neutral enclouser with a two pin and earth plug and socket complete with one single pole MCB of rating 20 Amps 240 volt gradeMAKE-LEGRAND/HAVELLS/C&S

Supply and fix POWER UNIT with one 25 amps socket, (incl 3 Pin Plug Top) including starter 25 Amps rating with four module plate and flush metal GI box and electrically connecting up fixed in repair complete all as specified and directed of Make Havells cat No- AHL0252504 (25 Amps) OR any equivalent model in Legrand / C&S

Supply and fix Weather proof flat twin core cable aluminium conductor of size 4 Sqmm suitable for house service connection complete all as directed.

All as per BOQ item No 50 above but of size twin core 6 Sqmm.

All as per BOQ item No 50 above but of size twin core 10 Sqmm.

M&L earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron wire 4mm dia size by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 20 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6) (chamber size not less than 300x300x300mm interier diamentions), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified. NOTE: The unit rate includes earth strip and protection pipe upto (maximum 7.5 metre from earth plate) earth point/test point. and chamber shall be made 0.5 mtr away from the earthing pit.

All as per Item No 53 above but Copper Plate electrode 600mm x 600mmx3mm.and 20×3mm copper strip as earthing lead.

S & F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing of size 20x3mm copper strip.

Supply and fix Retrofit T8 tube Polycarbonate 4 fit 20 W LED Rod , 240 volt Make : C&S code No. LT4F20WLEDT8/WD or equivalent in Bajaj/Havells

Supply and fix Retrofit T8 tube Polycarbonate 2 fit 10 W LED Rod , 240 volt Make : C&S code No. LT2F10WLEDT8/WD or equivalent in Bajaj/Havells

Supply and fix LED PLL of capacity 18 watts, 4 pin complete all as per Surya Cat No. SLE 18W PLL. or equivalent in Bajaj/Havells/Philips

S&F in replacement of flush galvanised iron not less than 1.6 mm thick terminal boxes of size 8" x 10"x 2" (inch) with 3 mm thick bakelite / hylam sheet top cover of white colour ISI marked including machine screw & washer with complete electric connection to existing switch/socket/fan regulators complete with civil work and making good to surrounding surface with white/colour wash or any type OBD as per existing colour of building complete all as specified.

All as per Item No- 59 above but of size 6" x 4"x 2" (inch)

All as per Item No- 59 above but of size 4" x 4"x 2" (inch).

Taking out existing worn out nut, bolt, rubber bush, cotter pin, and supply and fix new metallic clamps (minium 03 mm thick), rubber bush, nut bolt, washer and cotter pin and for various types of ceiling fans to complete the repair work.

M & L for painting of ceiling fans along with blades of any make/model of size 1200 to 1400mm sweep with spray paint white in colour supper enameled paint, writing MES No in 20mm letter size with black paint etc complete all as specified and as directed by Engineer- in - Charge.

Taking out defective/worn out bearing of any make and supply and fix new bearing (BBN. 6201) suitable for various makes of ceiling fans of size 1200 to 1400mm sweep. Make: SKF/NBC.

All as per Item No-64 above but 6202.

All as per Item No-64 above but 6203.

All as per Item No-64 above but 6204.

Taking out defective capacitor and supply and fix new capacitor of 2.5 mfd of approved make with holding clamp for various makes of ceiling fans. Make:-Epcos/Bhel

Taking out defective capacitor and supply and fix new capacitor of 3.15 mfd of approved make with holding clamp for various makes of ceiling fans. Make:-Epcos/Bhel

Taking out worn out Gun metal bush and supply and fix new Gun metal bush for various makes of ceiling fans of size 1200 to 1400mm sweep.

Taking out defective/burnt out windings of ceiling fans of various makes from Gov Married Accommodations of size 1200 mm sweep from working on 230/250 volt single phase AC supply and rewinding with supper enamelled new copper wire of appropriate gauge including varnishing with good quality varnish' baking up, reassembling the fan, testing including replacement of connector, flexible wire of size 23/0.0040 three core up to one metre all as directed by Engineer-in-Charge.

Taking out defective/burnt out windings of ceiling fans of various makes from OTM Aaccommodations of size 1200 mm sweep from working on 230/250 volt single phase AC supply and rewinding with supper enamelled new copper wire of appropriate gauge including varnishing with good quality varnish' baking up, reassembling the fan, testing including replacement of connector, flexible wire of size 23/0.0040 three core up to one metre all as directed by Engineer-in-Charge.

All as per item No - 72 above but of size 1400mm sweep.

Taking out defective copper bush and making new bearing slot with laith machine at workshop for fixing of bearing complete all as specified and directed by Engr-in-charge.

M & L for painting of exhaust fans along with blades of any make/model of size 225 to 380 sweep with spray paint black/existing colour super enameled paint, writing MES No in 20 mm letter size with white paint etc complete all as specified and as directed by Engineer -in - Charge.

All as per item No -65 above but of size 450mm sweep.

Taking out defective/worn out bearing of any make and supply and fix new bearing suitable for various makes of exhaust fans of size 225/380mm sweep. Make: SKF/NBC.

All as per item No -77 above but of size 450mm sweep.

Taking out defective capacitor and supply and fix new capacitor of 4 mfd of approved make for various makes of exhaust fans.

Taking out defective/burnt winding of exhaust fans of various makes of size 225 to 300mm sweep working on 230 to 250 Volt, single phase, AC supply, and rewinding with supper enameled new copper wire of appropriate gauge including varnishing with good quality varnish baking up, reassembling the fan, testing, transportation, replacement of connector, flexible copper wire of size 23/0.0040 three core up to one metre all as directed by Engineer-in-Charge.

All as per item No -80 above but of size 375/380mm sweep.

All as per item No -80 above but of size 450mm sweep.

Taking out rusted/defective down rod and supply and fix new down rod of medium grade GI tubing 15mm bore having holes and threading at ends as per site requirement.

All as per item No. 83 above but size of GI Tubing 20mm.

Removing broken/cracked ceiling fan canopy of any make and type and supply and fix new canopy of existing make and size.

S&F of fan blades suitable for 450 mm sweep exhaust fan of approriate size as per sample kept with Engr-in-charge compete all as specified and directed.

All as per item No. 86 above but size of 375/380mm sweep.

All as per item No. 86 above but size of 225/300mm sweep.

Supply and fixing Energy efficient Ceiling Fan, 1200mm sweep, 40 watt power consumption , 350 RPM, 218 Air delivery, BEE five star rating fan, colour in Bianco, Aerodynamic blade, 230V, including one no 5 step electronic type regulator and hanging clamp of suitable size made out of MS flate iron of thick ness not less than 50x5 mm, nut bolt and washer complete all as specified and directed by Engr-in-charge. Make : Havells or equivalent in USHA/Bajaj

Supply and fixing Energy efficient Exhuast fan 230/225mm sweep, PVC body, operating on single phase 230 Volt and including opening suitable for fixing exhaust fan in round/square shape complete all as specified and directed by Engr-in-charge. Make : Havells model No. Ventil Air-DS or equivalent in USHA/Bajaj

Supply and fixing Energy efficient Exhuast fan 300mm sweep, 1400 RPM, 230 Volt and including opening suitable for fixing exhaust fan in round/square shape complete all as specified and directed by Engr-in-charge. Make : Havells or equivalent in USHA/Bajaj

M&L for PVC insulated copper conductor wire of size 3 core 0.5 Sqmm flexible multistranded for making electrical connection from ceiling rose to ceiling / exhaust fan of any description.

Tools and labour for attending complaints of summer appliances including taking out and replacing of defective components window type air conditioners, split type air conditioners, through minimum one skilled mechanic and one helper all as specified and directed by engineer in charge. Note 1-Spare part required for replacement shall be measured and paid for separately under respective item of BOQ. Note 2 : Absentee / pending complaint shall be remitted by Rs 1000 per day for more than 24 hrs by contractor.

Supply only rotary type sealed compressor suitable for 2 Ton capacity split type air conditioner complete all as specified and directed.

Supply only sealed compressor ( Reciprocating type) 1.5Ton capacity for window type AC 1.5 Ton make Emerson Copland/Tecumseh complete all as specified and directed.

Supply only sealed compressor ( Rotary type) 1.5Ton capacity for window type AC 1.5 Ton complete all as specified and directed. Make:- Hitachi

Supply only of existing component as follows: - (a) Blower fan of Outdoor unit 1.5/2.0 ton split AC as per sample as directed by Engineer-in-charge.

(b) Drum type blower fan for indoor unit of split type AC 1.50 Ton capacity as per sample as directed by Engineer-in-charge.

(c) Drum type blower fan for indoor unit of split AC 2.00 Ton capacity as per sample as directed by Engineer-in-charge.

(d) Condenser fan blade as per sample as directed by Engineer-in-charge.

(e) Running capacitor 36 MFD make – EPCOS / BHEL.

(f) Running capacitor 36+6 MFD make – EPCOS / BHEL.

(g) Running capacitor 50 MFD make – EPCOS / BHEL.

(h) Running capacitor 50+6 MFD make – EPCOS / BHEL.

(j) Starting capacitor 80 to 100 UF make – Tesla / Asian.

(k) Thermostat switch make – Indfoss

(l) Double end shaft blower motor 1/5 HP or 1/6 HP suitable for window type AC 1.50 Ton capacity of 1440 RPM, make – AUE or equivalent, as per existing make.

(m) Starting relay make – Ranutrol.

(n) Condensers coil assembly as per sample as directed by Engineer-in-charge.

(p) Air filters / plastic type.

(q) Cooling coil assembly as per sample as directed by Engineer-in-charge.

(r) 'M' type heater 2.50 KW with thermal overload protection Make – Dasspas.

(s) 'Net' type heater 2.50 KW with thermal overload protection Make – Dasspas.

(t) Front grill with screw suitable for window type AC 1.50 Ton capacity of make – Carrier / Usha Shriram / Sidwal / Fedder / LG / Samsung.

Supply, Installation, commissioning and fixing of reverse cycle valve any make suitable for window type AC 1.50 Ton capacity including required copper pipe and two way switch complete all as specified and directed NOTE:- Gas charging if required shall be paid separately under respective item of BOQ..

Taking down 1.50 Ton capacity window type air conditioner, cleaning with MAC solution, Servicing of inner surface, overhauling of blower motor including cleaning of cooling coil and condenser coil with MAC solution and including fileter cooling and pressed air with blower, replacement of worn out parts, assembling, testing on full load and reinstallation at site as directed complete all as specified and directed.

All as per item 116.00 hereinbefore but 1.50 Ton capacity split type air conditioner complete with inner and outer unit complete all as specified and directed.

All as per item 116.00 hereinbefore but 2.00 Ton capacity split type air conditioner complete with inner and outer unit complete all as specified and directed. The worn out items / parts of AC shall be measured and paid separately in respective item of BOQ

Taking down of AC 1.5 Ton capacity cleaning , preparation of the body for painting, one coat of black bitumen paint on inner side and one coat of synthetic enamel paint make Asian/Berger/ Ist quality on the outer cover, marking SM/MES No reinstallation at site complete all as specified and directed by EIC /GE.

M & L for gas charging M/R-12 / M/R-22 / R-134 / R410a to the following appliances including removal of old fitter, copper tubing / capillary and replacement of new filter, capillary, short piece of copper tubing of equipment and leakage testing of the same on full load after re-installation of the same at site complete all as specified and directed: - (a) Window type air conditioner 1.50 Ton capacity of any make.

(b) Split type air conditioner 1.50 Ton AC capacity of any make.

(c) Split / cassel type air conditioner 2.0 Ton capacity of any make.

(d) 100 Ton AC Plant at Hazipir

Supply and replacement of 30 Ampere three pin top with earth plug and socket of Havells make complete all as specified and directed.

M & L for replacement of defective voltmeter, indicator lamp, high / low voltage cut off relay circuit plate, toggle switch of voltage stabilizer 0.50 KVA capacity, re-assembling after replacement of parts and testing of the same in full load complete all as specified and directed

M & L for replacement of defective voltmeter, indicator lamp, high / low voltage cut off relay circuit plate, toggle switch of voltage stabilizer 1.0 KVA capacity, re-assembling after replacement of parts and testing of the same in full load complete all as specified and directed

M & L for replacement of defective voltmeter, indicator lamp, high / low voltage cut off relay circuit plate, toggle switch of voltage stabilizer 2.0 KVA capacity, re-assembling after replacement of parts and testing of the same in full load complete all as specified and directed

M & L for replacement of defective voltmeter, indicator lamp, high / low voltage cut off relay circuit plate, toggle switch of voltage stabilizer 3.00 KVA capacity, re-assembling after replacement of parts and testing of the same in full load complete all as specified and directed

M & L for replacement of defective voltmeter, indicator lamp, high / low voltage cut off relay circuit plate, toggle switch of voltage stabilizer 4.0 KVA capacity, re-assembling after replacement of parts and testing of the same in full load complete all as specified and directed

M & L for replacement of defective voltmeter, indicator lamp, high / low voltage cut off relay circuit plate, toggle switch of voltage stabilizer 5.00 KVA capacity, re-assembling after replacement of parts and testing of the same in full load complete all as specified and directed

M & L for rewinding of main transformer of 0.50 KVA capacity voltage stabilizers complete all as specified and directed.

M & L for rewinding of main transformer of 1.0 KVA capacity voltage stabilizers complete all as specified and directed.

M & L for rewinding of main transformer of 2.0 KVA capacity voltage stabilizers complete all as specified and directed.

M & L for rewinding of main transformer of 3.00 KVA capacity voltage stabilizers complete all as specified and directed.

M & L for rewinding of main transformer of 4.0 KVA capacity voltage stabilizers complete all as specified and directed.

M & L for rewinding of main transformer of 5.00 KVA capacity voltage stabilizers complete all as specified and directed.

Supply only thermostat of make Indfoss / Ranutrol suitable for window type air conditioner complete all as specified and directed.

Supply only starting relay suitable for 1.50 Ton capacity window type air conditioner complete all as specified and directed.

Supply only thimble made of brass coated suitable for 1.50 Ton capacity window type air conditioner complete all as specified and directed.

Supply only condenser motor 1/32 HP suitable for 80 Litres capacity water cooler of make – AUE / GE complete all as specified and directed.

Supply only 32 mm dia heavy duty flexible PVC pipe complete all as specified and directed.

Supply only 15 mm dia heavy duty flexible PVC pipe complete all as specified and directed.

Supply only descaling solution in sealed packing make – Maic complete all as specified and directed.

Supply only heavy duty copper strainer filter suitable for window type air conditioner complete all as specified and directed.

S & F as in replacement electronic circuit plate along with remote suitable for window or split type air conditioner 1.50 Ton capacity of make – LG, Samsung, Voltas complete all as specified and directed.

S & F as in replacement digital circuit plate as per sample as directed by Engineer-in-Charge suitable for ON / OFF starting and running system including making all necessary connections complete all as specified and directed.

S&F in replacement of over load protector with relay suitable for 2.0 Ton outdoor unit of split AC, single phase complete all as specified and directed. Make :- Carrier

Taking out existing old compressor and S&F scaled compressor unit of 1 TON capacity for water cooler 150 liters capacity, make Emerson Copland/Tecumseh, Complete all as specified and directed.

Taking out existing old compressor and S&F scaled compressor unit of 0.50 TON capacity for water cooler 80 liters capacity, make Emerson Copland/Tecumseh, Complete all as specified and directed.

Taking out existing old compressor and S&F scaled compressor unit of 1/6 HP Compressor with relay/OLP suitable for Refrigerator of make Tecumseh / Kirloskar Complete all as specified and directed.

Taking out existing old compressor and S&F scaled compressor unit of 1/8 HP Compressor with relay/OLP for Refrigerator of make Godraj, Complete all as specified and directed.

Taking out existing old compressor and S&F scaled compressor unit of 1/6HP Compressor with relay/OLP for Deep freezer of make Voltas, Tecumseh, LG, Complete all as specified and directed.

Taking down of desert coolers 4000-5000CFM capacity cleaning , preparation of the body for painting, one coat of black bitumen paint on inner side and one coat of synthetic enamel paint make Asian/Berzer/ Ist quality on the outer cover, marking SM/MES No reinstallation at site complete all as specified and directed by EIC / GE.

Disconnecting and taking out following machine and preparation of old surface removing of old existing paint complete removing denting repairing of patch work including replacement and reassembling with new GI sheet 20 SWG (if required) and welding, soldering and making surface body for painting one coat of red oxide and two coat of synthetic enamel paint (color approved by EIC/GE) including writing of SM No/Sl. No. and tested at sites of full load and reinstallation in same position. (a) Refrigerator 165 ltr capacity Complete all as specified and directed.

(b) Refrigerator 286/310 ltr capacity. Complete all as specified and directed.

(c) Water cooler 80 ltr capacity storage type. Complete all as specified and directed.

(d) Water cooler 150 ltr storage type. Complete all as specified and directed. Note:- UNSV/Worn out parts shall be measured and paid separately under respective item of BOQ.

Supply & Replacement of following items for refrigerators/Deep freezer any capacity upto 400 Ltrsas directed by Engr-in-charge complete all as specified and directed. (a) Thermostat switch with knob Complete all as specified and directed. Make :- Indofoss / Ranutrol

(b) Freezer door complete with spring with cabinet suitable for 165 Ltrs. Complete all as specified and directed.

(c) Freezer door complete with spring with cabinet suitable for 300 / 310 Ltrs. Complete all as specified and directed. Make :- Godrej

(d) Freezer coil assembly complete suitable for 310 Ltrs. Complete all as specified and directed.

(e) Freezer coil assembly complete suitable for 165 Ltrs. Complete all as specified and directed.

(f) Condenser motor for deep freezer of 310 Ltr complete all as specified and directed.

Supply and replacement of following items suitable for water coolers of any capacity complete all as specified and directed: - (a) Blower/condensor motor 1/6 HP make – AUE / GE.

(b) Blower/condensor motor 1/35 HP make – AUE / GE.

(c) Push cock 15 mm dia outer threaded, made out of heavy duty chromium plated brass.

(d) Push cock 15 mm dia inner threaded, made out of heavy duty chromium plated brass.

(e) Float valve 15 mm dia made of PTMT complete all accessories make – Prayag.

(f) Thermostat switch make – Ranutrol.

(g) Starting capacitor 80 to 100 UF make Asian / Tesla.

(h) Running capacitor 36 mfd make – EPCOS.

(j) Running capacitor 10 mfd make – EPCOS.

(k) Starting relay make – Ranutrol / Shri Ram.

(l) PVC drain pipe 32/ 25mm haevy thickness, suitable for water cooler waste water

(b) Side grill made of 20 SWG GI sheet 20 SWG as per sample kept with Engineer-in-charge.

(c) Cooler fan motor (copper winding) 1/6 HP ISI marked complete with blade leg make – khaitan / Crompton / Bajaj.

(d) Submersible pump 18 watt 230 Volts make – Khaitan / Crompton / Bajaj.

(e) Wood wool pad best quality for desert cooler 4000 to 6000 CFM as approved by Engineer-in-charge.

(f) PVC distributor 4 Way with fixing arrangement as per site requirement.

(g) Electronic regulator 250 Watt as per sample.

(h) Top cover made of 20 SWG thick GI sheet of size 36” X 31” X 2”.

(j) Bottom tank made of 20 SWG thick GI sheet of size 36” X 31” X 6”.

(k) Front panel made of 20 SWG thick GI sheet of size 36” X 31”.

S & F of condenser motor of deep freezer suitable for Voltas / LG make deep freezer as per sample kept with Engineer-in-charge complete all as specified and directed.

S & F of thermostat of deep freezer suitable for Voltas / LG make deep freezer as per sample kept with Engineer-in-charge complete all as specified and directed.

S & F of relay set of deep freezer suitable for Voltas / LG make deep freezer as per sample kept with Engineer-in-charge complete all as specified and directed.

Supply and replacement of 30 Ampere three pin top with earth plug and socket of Havells make complete all as specified and directed.

Supply only 1.50 sqmm size multi-stranded single core flexible copper wire complete all as specified and directed.

Supply only 2.50 sqmm size multi-stranded single core flexible copper wire complete all as specified and directed.

Supply only 4.00 sqmm size multi-stranded single core flexible copper wire complete all as specified and directed.

Supply only PTC relay for refrigerator of 310 Litres capacity of make – Whirlpool / LG complete all as specified and directed.

Supply only over load relay suitable for 1/6 HP compressor as per sample kept with Engineer-in-charge complete all as specified and directed.

Supply only over load relay suitable for 1/8 HP compressor as per sample kept with Engineer-in-charge complete all as specified and directed.

Supply only relay with OLP of make – Annapurna suitable for Godrej make refrigerator 300 Litres capacity complete all as specified and directed.

Supply only thermostat suitable for refrigerator any capacity complete all as specified and directed.

Supply only set of two ice trays made out of good quality food grade Plastic, transparent type complete all as specified and directed.

Supply only screw type bulb as per sample kept with Engineer-in-charge complete all as specified and directed.

Supply only 1/4" dia heavy duty copper tubing complete all as specified and directed.

Supply only starting capacitor 80 to 100 mfd make – TESLA / Asian suitable for water cooler complete all as specified and directed.

Supply only running capacitor 4 mfd make – USHA / EPCOS suitable for desert cooler / water cooler complete all as specified and directed.

Supply only fan blade made of heavy duty PVC suitable for 80 Litres capacity water cooler complete all as specified and directed.

Supply only fan blade made of heavy duty PVC suitable for 150 Litres capacity water cooler complete all as specified and directed.

Supply only thermostat for water cooler of make – Indfoss / Ranutrol complete all as specified and directed.

Supply only running capacitor 6 MFD make – EPCOS complete all as specified and directed.

Supply only condenser motor 1/6 HP suitable for 150 Litres capacity water cooler of make – AUE / GE complete all as specified and directed.

Supply only condenser motor 1/32 HP suitable for 80 Litres capacity water cooler of make – AUE / GE complete all as specified and directed.

Supply only plug top of 5 / 6 Ampere of make – Anchor / SSK complete all as specified and directed.

Supply only Plug top of 15 / 16 Ampere of make – Anchor / SSK complete all as specified and directed.

Supply only GI nipple medium grade of size 15 mm dia 25 mm long complete all as specified and directed.

Supply only GI nipple medium grade of size 25 mm dia 40 mm long complete all as specified and directed.

Supply only float valve of size 15mm complete ball with rod brass heavy duty.

S&F for following parts of RO water system of any make/any capacity up to 50 Ltrs per hrs by changing or replacing with new parts including complete servicing by the representative of manufacturer or authorized dealer. The makes of items shall be replaced on written approval of GE after verification of RO by representative / engineer of manufacturer. (a) Pre Filter

(b) Pre carbon filter

(c ) Carbon filter

(d) Water pump 24 V

(e) Power pack 230 / 24 & 36 V

(f) Electrical Valve 24 V

(g) SV Valve

(h) Float Valve switch

(j) SMPS adopter

(k) Water Inlet PVC Pipe

(l) Water waste PVC Pipe

Supply only 450 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

Supply only 15 mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F as in replacement digital circuit plate as per sample kept with Engineer-in-Charge suitable for ON / OFF starting and running system including making all necessary connections complete all as specified and directed.

S&F Aaluminium Cable lugs of size 20mm, 25mm complete all as specified and directed by Engineer-in-Charge

S&F Aluminium Cable lugs of size 40mm complete all as specified and directed by Engineer-in-Charge

S&F in replacement of MCB triple Pole and neutral 415 volts, 63 Amps, rupturing capacity 10 KA complete all as specified and directed by Engineer-in-Charge

A ONE BUILDERS AND ENGINEERS

KISHORE CHAND DINESH CHAND

Tarachand gurudutt