Interior and renovation work for the office of SIDBI at Kolkata

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

1 FLOORING WORKS DSR RATE NON DSR

CEMENT CONCRETE: Providing and laying in position CEMENT CONCRETE of specified grade exluding the cost of centring and

1.01 shuttering-all work upto plinth level.

4.1.8 1: 4: 8 (1 Cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) 10.00 CUM 6812 68,120.00

RAISED FALSE FLOOR: Providing and fixing removable raised/false access flooring with systemand its components of approved make

for different plenum height with possible height adjustment upto 50mm, comprising of modular loadbearing floor panels supported on G.I.

rectangular stinger frame workand G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by

Engineer-in-charge consisting of:

(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm

outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal

head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud

for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to

the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized ofrectangular size 570x20x30x0.80mm thick having holes at both

ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions,

the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid

11.54 support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for

1.02 electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge.

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H

grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64

hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum

64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and

cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight

foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto

1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs

applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand

and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved

manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to

ensure the quality of the product.

11.54.2 450mm Finished Floor Height (FFH). 6.50 sq m 5977.35 38,852.78

ALUMINIUM SKIRTING: Supply of 100mm Aluminium (Grade 6063) Skirting with 15 micron anodising In Natural Finish. Thickness 1.30

to 1.50mm. Designed to conceal screws. Seamless finish. Complete with Rubber/ PVC Jointers and Gasket.

SOLID POLIMER COMPOSITE OR VENYLE FLOORING: Providing and Fixing of floor tiles with wear layer is of 0.5mm, made upof

Stone Polymer composite, 100% Water & Termite proof, Scratch/ Flame/ UV resistant, anti-microbial, 100% recyclable Green product

having click system with suitable skirting. Classification of abrasion resistance (Abrasion wheelfromH-18 Calibrade, loadApplied 1000

grams, No. of Cycles 14,400). " ( Along with Matching Profiles)

VITRIFIED TILES: Providing and laying vitrified floor and wall tiles in different sizes (thickness to be specified by the manufacturer) with

water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement

11.41A mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and

matching pigments etc., complete.

IPS FLOORING: 52mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix

1.07 11.4 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg 25.00 sq m 978.45 24,461.25

of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc.

TOTAL FLOORING WORKS 13,53,598.03 8,33,500.00

2 FALSE CEILING WORKS

2 Digitally signed by AMIT

GYPSUM BOARD CEILING: Providing and fixing false ceiling at all height including providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange

fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm

with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter

2.01 12.45 channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help

of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section

and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish

of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3

layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and

also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed,

all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with

12.45.1 12.5mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) 480.00 sq m 1355.8 6,50,784.00

STRETCHED FABRIC CEILING: Supply & installationof fabric false ceiling / wall formed out with TRANSLUCENT Printed fabric

coverings made out of polyester knitted fabric coated with Polyurethane (PU). The TRANSLUCENT Printed fabric width of 2m, 3m, 4.1m

&5.1m with weight of 200gm/m2, thickness of 0, 3 mm. The appearance of fabric is matt, smooth and uniform with blanq color and light

transmission of 50%. The tear strength of fabric should be accordance to CH: 4,5daN; TR: 6,5 daN. The fire rating should be accordance

to B-S1, d0. The fabric should be humidity resistant and free of carcinogenic substances(CMR) or volatile organic Compounds (VOC’s).

At labeling in accordance with the French decree no. 2011- 321, Oeko-Tex standard100 certified. Fabric should be installed with

approved manufacturer guidelines. It comes with 10- year manufacturer guarantee. The installation of TRANSLUCENT Printed fabric

should be dry installation & done at room temperature using CLIPSO PVC, ABS Grippers. Clipso ceiling base to be made of MS or

Wooden frame finishing to a flush finish of tapered and square edges in desired design as per architect specification.Supply of LED

Lights behind the Fabric Wall/ False ceiling in modules/ PCB with recommended wattage as per manufacturer's standards to give an

effect of ambient lighting. LED make MLS/ Bridgelux / Osram- SMD 2835, LED spacing / Pitch should be atleast 73 -80mm with beam

angle of 170 degree, Colour temperature shoud be as per design intent 3000K/4000K/6000K. Wattage of 8-10W/mtr. LED modules/ PCB

should be positioned properly to provide an even light flow, casting noshadows or dark spots. LED Driver Cost included.

METAL CEILING: Providing and fixing GI Plain 84mm wide x15mm deep panel upto 6mtr, shall be roll formed out of 0.5mm thick

Powder Coated .The top coat of panel shall be 60 micron polyester coated finish in approved colour. The panel shall be factory cut in up

to 6Mtr OR required length. Accessories Detail: Carrier: 63mm deep, made out of 0.6mm thick steel backed with enameled black paint

2.04 MR having cut out to hold on panel in a module of 75mm closed. The joint of two carriers shall be joined by means of carrier splices 190.00 sq m 4600 8,74,000.00

maintaining a module of 75mm .4mm dia galvanized rod with special height adjustment butter fly clips made out of SS steel sheet. The

edge profile G.I.shall be matching with the panel.

PERFORATED SQUARE ACOUSTIC CEILING: Providing and fixing suspended Demountable acoustic ceiling in recessed grid system

300x1200x12.5mm E with Unity 3, square 3.5mm holes, with 0.80 NRC* Material: High Grade Glassfiber Reinforced Perforated

2.05 MR plasterboard with Cleaneo TechnologyBoard type: Ceiling tile Lengthxwidthxthickness: 300x1200x12.5mmEdge: E recessed grid system 200.00 sq m 3850 7,70,000.00

(8mm recess) Perforation: Unity 3, 3.5x3.5 Surface: Water-based acrylic paint Colour: White NCS 0701 Y24R, closet match to RAL

9003; gloss 5 Attachment: Silhouette 15mm face exposed grid. 100 MM Centre to Centre

TOTAL FALSE CEILING WORKS 6,50,784.00 18,25,300.00

3 WALL FINISHES WORKS

GLASS PARTITIONProviding and fixing framedglass door/glass partition wherever required 10 mm thickness including all fittings,

frames etc. as per direction of EIC( Floor spring lock and handle paid seprately)

WOODEN DOOR FRAMES : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed

9.1 and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for

3.03 separately).

9.1.1 Second class teak wood 0.55 cu m 142949.7 78,050.54

WOODEN BATTERNS : Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling

3.04 necessary holes for rawl plug etc. including priming coat complete.

8.27.1 Kiln seasoned and chemically treated hollock wood 0.75 CUM 187277.65 1,40,458.24

3 Digitally signed by AMIT

FLUSH DOOR SHUTTERS : Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,

9.21 core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or

cross bands and face veneers on both faces of shutters:

9.21.1 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws 5.00 SQM 2392.65 11,963.25

WOODEN LIPPING : Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door

shutters (over all area of door shutter to be measured).

Providing and Fixing ESDH 22x450 mm D-type Handle Material : Stainless Steel. Finish : Satin Stainless Steel (SSS). of approved

make and model all complete as per the direction of Engineer-in-charge.

Providing and Fixing EMB 245 SS Mortise Lock Body SB/TB for door thickness 25-50 mm for of approved make and model all complete

as per the direction of Engineer-in-charge.

Providing and Fixing FH-943 Double cylender Floor Spring- with Closing Force EN 3 with Maximum door weight 105 Kg. Maximum door

width 950mm.Closing speed : 130°

3.09 MR Final closing speed : 15-0°. Hold Open (standard): 90° hold open. Weight of floor spring approx : 6kg, 5,00,000 cycles Tested with 5 22.00 Each 7550 1,66,100.00

Years Warranty against manufacturing defect. CE certified for wooden doors all complete as per the direction of Engineer-in-charge.

Providing 40x5mm flat iron hold fast 400mm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and

3.1 9.53 embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal 51.00 EACH 228.85 11,671.35

Providing and Fixing EFS ACC-001,002 top and Bottom Strap of approved make and model all complete as per the direction of

Engineer-in-charge.

Providing and Fixing EDL 024 Dead lock Back set- 50 mm with Key Hole of approved make and model all complete as per the direction

of Engineer-in-charge.

GLASS FILMS: Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-

blasting effect on glass with customised designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive having

minimum tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4 pounds/inch (0.7

3.14 MR kg/cm) on Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors) must be endorsed by 3M 40.00 SQM 2650 1,06,000.00

India Limited Architectural Market Department. Contractors payment wouldn't be released until & unless he/she produces orginal

warranty certificate from the manufacturer.

Providing and fixing Channelled woodwork acoustic wall panel of width of 192/132/128mm with finishing of 15 mm thick Grooved wooden

acoustic panel of size 2420 mm, Groove Size 3.2mm at an interval of 21mm/28 mm c/c as per acoustic design / Architects’ approval, the

wooden acoustic panels to be backed with black acoustic fleece with NRC of 0.45 (NRC 0.8 with 50mm GW of 48kg/m3).the edge of

3.15 MR panel shall be Tounge and groov to be fixed with clips on aluminium profile designed specially fo the panel. the panel will be mounted 25.00 SQM 3200 80,000.00

with the help of clips on Bollard Aluminium extruded Keel. The grooved acoustic panel laminated in desired shade as per Engineer In

charge / Architect’s approval.

BLINDS Providing & supplying of Window Blinds as per the approved sample in required shade and style consisting, of ZEBRA BLINDS

comprising of optima screen Fabric comprising of 22% polyester, 78% PVC, Fabric weight 460-480G weight per sq m, Thickness 0.67

mm, Yarn count 18-19/cm, having fire resistance standard – NFPA 701-89 small testing ISO-5659-2 .Thetear resistance should be

complying to ISO4674 & breaking resistance – ISO 5081. The DRIVE UNIT shall be of clutch for quick, easy and safe installation,

moulded plastic with steel spring support and inserted into the tube end. It shall be driven by a ball chain pulley with ball chain and can

be positioned at right side or left hand side of the Shade. The Shade when lowering or raising, shall be automatically locked in position

3.21 MR upon release of the ball chain by means of a built in friction lock.Universal clutch for left and right hand operation.Chain Gear Ratio of 50.00 SQM 3850 1,92,500.00

1.75:1. The END PLUG shall be molded of plastic witha steel location pin.The plug shall be inserted into the tube end.(Opposite to the

Drive Unit) for ease of installation. The SUPPORT BRACKETS shall be of coated steel & provided with covers and used in right hand or

left hand positions differentiated by the acceptance of the of the rectangular drive unit support or the round idler plug pin.Can beinstalled

(a) On Face (b) Ceiling Mount (c) On Frame (d) in Recess. The Bracket should be protruding outside maximum of 80mm.The ROLLER

TUBE shall be of extruded aluminum with 37mm internal diameter & skin thickness of 1mm and shall incorporate a key way integral with

the tube to accommodate the spline. The BOTTOM RAIL shall be a Flat Bottom made up of powder coated steel. The BALL CHAIN shall

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to

3.23 floor V level.

6.13.2 Cement mortar 1: 4 (1 cement: 4 coarse sand) 10.00 Sqm 1123.8 11,238.00

3.24 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. 10.00 Sqm 104.8 1,048.00

4 Digitally signed by AMIT

13.4 12 mm cement plaster of mix :

3.26 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. 1100.00 Sqm 263.7 2,90,070.00

13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile

Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture,

3.27 including applying additional coats wherever required to achieve even shade and colour.

PLY: Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and

3.28 fixed on wooden /steel frame work, complete as per direction of Engineer-in-Charge

9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR type 1000.00 SQM 1224.65 12,24,650.00

4mm THICK MDF BOARD with 1 mm thick laminate : Providing and fixing plain lining with necessary screws/ nuts & bolts/ nails,

3.29 MR including a coat of approved primer on one face, and fixed on wooden/ steel frame work, complete as per direction of Engineer-in-

4mm thick MDF Board 480.00 SQM 1680 8,06,400.00

ALUMINIUM FRAME: Providing and fixing 100mm thick partition, frame work in 50x25x1.5mm Aluminium Section placed at 600mm

centre to centre both ways (horizontal & vertical) fastened to floor, ceiling and horizontal member. The item includes providing and fixing

50mm thick polyester synthetic insulation as insulation of 100 GSM. (Frame colour to be as per the design like anodised black etc,

including the hardware)

THERMAL INSULATION: Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having

3.32 12.57 density 24 kg/m3, 50mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawl plug & washers and held in position 750.00 SQM 358.5 2,68,875.00

by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge.

3.33 MR WALLPAPER: Washable Vinyl Coated Wall covering as per approved make and pattern as approved by the client 150.00 SQM 2250 3,37,500.00

TOTAL WALL FINISHING WORKS 21,99,163.92 29,67,022.00

WATERPROOFING: Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C.,

kitchen and the like consisting of:

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended

proportions including rounding off junction of vertical and horizontal surface.

4.03 22.3 (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion 16.40 SQM 769.6 12,619.90

including rounding off junction of vertical and horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with

bitumen @ 1.7 kg/sqm).

SHOP DRAWINGS: Preparation of complete set of shop drawings including finishing, MEP services, details, design calcualtions etc. and

4.04 MR any other details as and when desired by Engineer Incharge/ client. A qualified professsional for the purpose shall be appointed after due 1.00 LS 3,00,000.00 3,00,000.00

appproval from Engineer InCharge.

MR Dismenteling and shifting of temporary falce ceiling, partition with frame and other required area for renovation work 1.00 LS 1,50,000.00 1,50,000.00

TOTAL MISCELLANEOUS WORKS 12,619.90 4,50,000.00

5 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

S NO TOTAL AMOUNT TOTAL AMOUNT

S NO TOTAL AMOUNT TOTAL AMOUNT

NO DESCRIPTION UNIT QUANTITY RATE

2021 DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of SINGLE LEVER CONCEALED BASIN

MIXER (WALL MOUNTED) WITH SPOUT (COMPOSITE ONE PIECE BODY)

Supply, Installation, Testing and Commisioning of TABLE TOP BASIN, SIZE:

Supply, Installation, Testing and Commisioing of suitable compatible WASTE COUPLING

32MM- FULL THREAD- WITH CERAMIC CAP-*130MM HEIGHT *65MM CERAMIC CAP

Supply, Installation, Testing and Commisioing of BOTTLE TRAP (WITH INTERNAL

MR 4 PARTITION) 32mm SIZE WITH 300mm & 190mm LONG WALL CONNECTION PIPES & EACH 8 3860.00 30880.00

Supply, Installation, Testing and Commisiong of RIMLESS, BLIND INSTALLATION WALL

MR 5 HUNG WC WITH UF SOFT CLOSE SLIM SEAT COVER, HINGES AND ACCESSORIES EACH 6 32650.00 195900.00

SET, SIZE: 375X520X400 MM

MR 6 Supply, Installation, Testing and Commisiong of PNEUMATIC CONTROL PLATE EACH 6 9560.00 57360.00

Supply, Installation, Testing and Commisiong of ANGULAR STOP COCK WITH WALL

Supply, Installation, Testing and Commisiong of CONCEALED STOP COCK WITH

MR 8 ADJUSTABLE WITH WALL FLANGE 15mm EACH 6 4965.00 29790.00

Supply, Installation, Testing and Commisiong of HAND SHOWER (HEALTH FAUCET) WITH

MR 9 8mm DIA 1.2 METER LONG FLEXIBLE TUBE EACH 6 2541.00 15246.00

Supply, HOOK ALD-CHR-573

Installation, Testing andor Commisiong

equivalent of PNEUMATIC SINGLE PIECE SLIM

MR 10 CONCEALED CISTERN BODY WITH INSTALLATION KIT & “S-TYPE” DRAIN PIPE EACH 6 9500.00 57000.00

CONNECTION SET FOR WALL HUNG WC (WITHOUT FLUSH CONTROL PLATE)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

17.28 complete.

17.28.2 Flexible pipe

Providing and fixing mirror of superior glass (of approved quality) complete with 6mm thick 9647.70

hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved

13 quality conforming to IS : 8931

18.53.1 15 mm nominal bore EACH 20 574.30 11486.00

18.76 Cutting holes upto 30x30cm in walls including making good the same.

18.76.1 With common burnt clay F.P.S. (non modular) bricks EACH 5 416.80 2084.00

Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with matching 202.90 1014.50

surface after housing G.I. pipe etc.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the

18.7 pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

17 20mm nominal outer dia pipes 335.00 20100.00

18.7.3 25mm nominal outer dia pipes METRE 150 401.55 60232.50

18.7.4 32mm nominal outer dia pipes METRE 10 518.75 5187.50

Digitally signed by AMIT

18.7.5 40mm nominal outer dia pipes METRE 10 702.95 7029.50

18.7.6 50mm nominal outer dia pipes METRE 10 934.15 9341.50

18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water

Concealed supply, including

work including all CPVC

cutting chases plain

making goodthreaded

the wallsfittings,

etc., i/c fixing the pipe

18.8.1 15mm nominal outer dia pipes METRE 30 497.80 14934.00

18.8.2 20mm nominal outer dia pipes METRE 120 537.60 64512.00

18.8.3 25mm nominal outer dia pipes METRE 10 627.25 6272.50

18.8.4 32mm nominal outer dia pipes METRE 10 739.30 7393.00

18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS

19 standards and weighing not less than 690 gms.

18.51.1 15 mm nominal bore EACH 5 798.95 3994.75

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for

soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all

neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or

without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels,

clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp &

hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc.

including chase cutting as required, excavation and back filling in all kind of soils, suspended

from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm.

20 alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) including cost of shuttering for proper completion of the work, breaking and

making good the walls and floors etc. after pipes have been duly laid and tested. The rubber

ring shall confirm to IS:5382.

The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on

50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes

commissioning of all pipes lines as per drawings and specifications and as directed by engg-

in-charge at site.

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 180.00 536.00 96480.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 180.00 416.00 74880.00

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6

Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces,

enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by

MR 21 clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with

cement concrete 1:2:4 complete as required.

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating

MR 22 complete in all respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser EACH 11 536.00 5896.00

MR 23 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. EACH 11 726.00 7986.00

Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round

cover with screws and other required fitting complete as required.

Supply, Installation, testing and commisioning of toilet waste water super quiet portable

pumping station. Pump upto vertical 5 meters and horizontal 100 meter from toilet to vertical

MR 25 shaft with inlet connection in portable pump side inlet of 50, 75, 110 as per requirement to EACH 5 67430.00 337150.00

complete the work as per the directions of engineer in charge

Providing and fixing stainless steel tray below sewage pipe of size 200x200x200 mm of grade

MR 26 SS304 including all accessories METRE 40 3629.00 145160.00

Digitally signed by AMIT

Supply, Installation, Testing and Commisiong of HIGH FLOW SINGLE LEVER CONCEALED

MR 27 DIVERTOR FOR BATH & SHOWER EACH 1 18938.00 18938.00

Supply, Installation, Testing and Commisiong of SPOUT FOR BUILT IN BATH/SHOWER

Supply, Installation, Testing and Commisiong of OVERHEAD SHOWER 350x350MM ROUND

MR 29 EDGE SQUARE HEAD SINGLE FLOW (BODY & FACE PLATE STAINLESS STEEL WITH EACH 1 3000.00 3000.00

CHROME PLATED) WITH RUBIT CLEANING SYSTEM

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC

1.10 conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5

sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent

switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in

1.55 surface / recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated

copper conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single

A.3 1.12 core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS Metre 345.00 334.00 115230.00

PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

1.24 box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 360 122.00 43920.00

1.24.5 6 pin 15/16 amp socket outlet Each 60 197.00 11820.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box

A.6 1.26 excluding modular plate as required. Each 80 40.00 3200.00

Supplying and fixing following size/module, GI box along with Modular base & cover plate on

existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC

1.14 insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit

1.5 sq. mm + 1 X 1.5 sq. mm earth wire

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 500 334.00 167000.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 50 439.00 21950.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 50 1005.00 50250.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 50 1365.00 68250.00

Digitally signed by AMIT

Supplying and making end termination with brass compression gland and aluminium lugs for

9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1

KV grade as required.

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium

Conductor Cables :

MR Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor

C.2 armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively &

(a) 3.5 C x 120 Sqmm XLPE cable RM 10 1560.00 15600.00

(e) 3.5 C x 35 Sqmm XLPE cable RM 10 850.00 8500.00

Supply of following sizes of copper cables -PVC sheathed PVC/XLPE insulated Copper

C.3 MR conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1

respectively & ISI marked.

(a) 4 C x 16 Sqmm XLPE copper cable RM 50 1850.00 92500.00

(b) 4 C x 25 Sqmm XLPE copper cable RM 50 2650.00 132500.00

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with

D.2 connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral

2.4 bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as

D.4 required. (But without MCB/ RCCB/ Isolator)

MR 12 way (4 + 36), Double door Each 2 9081.00 18162.00

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,

2.14 residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in

the existing MCB DB complete with connections, testing and commissioning etc. as required.

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supply, installation, testing & Commissioning of 1 module 16A SWITCH SP 1 way for floor

E.2 MR Supply, installation, testing & Commissioning of 2 module 16 A Socket for floor box box. Set 1 577.00 577.00

Digitally signed by AMIT

Supply, installation, testing & Commissioning of Specific Backbox for Carpet for Floor Box

E.3 MR along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for headband and Set 1 12106.00 12106.00

single cable outlet/ glavanized steel, paint RAL 7031 for floor box .

Supply, installation, testing & Commissioning of Specific Backbox for Wooden Flooring for

E.4 MR Floor Box along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for Set 1 6803.00 6803.00

headband and single cable outlet/ glavanized steel, paint RAL 7031 for floor box.

Supply, installation, testing & Commissioning of flat support plate 8 module for integration of

Mechanism for Floor Box

Supply, installation, testing & Commissioning of waved support plates for 4 module (2x2)

E.6 MR modules for Floor Box Set 1 1533.00 1533.00

Supplying and fixing following modular switch / socket on the existing modular plate & switch

1.24 box including connections but excluding modular plate etc. as required.

1.24.7 TV socket outlet Set 1 148.00 148.00

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with

MR required suitable number of GI couplers for joining raceways and fixing GI brackets and all

accessories complete in all respect as per the directions of engineer in charge

(a) 300mmx38mm(GI) - 3 compartment Mtr 20 4260.00 85200.00

E.9 (b) 225mmx38mm(GI) - 3 compartment Mtr 50 3350.00 167500.00

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables

at the intersection of raceways supplied completely with base and cover plates, height

MR adjustable junction box 65- 90 mm including all accessories complete in all respect as per the

directions of engineer in charge

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

E.11 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the exisitng Meter 30 47.00 1410.00

surface/recessed steel/ PVC conduit as required

Supplying and Installation of following size perforated of painting with powder coating M.S.

cable trays of perforation of not more than 17.5% in convinient sections, joined with

4.1 connectors suspended from the cieleing with MS suspenders including bolts and nuts painting

suspenders etc as required

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 10 1137.00 11370.00

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

providing masonry enclosure with cover plate having locking arrangement and watering pipe

F.1 5.6 of 2.7 metre long etc. with charcoal/ coke and salt as required. SET 2 13838.00 27676.00

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

F.4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. MTR 50 70.00 3500.00

Digitally signed by AMIT

G PANEL BOARDS

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply

with rear access for cable alley and with segregated bus-bar chamber with tinned aluminium

bus bar and including supplying and fixing following switchgears, meters and accessories,

inter-connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

G.1 MR Colour: Gray Powder Coated, as per approved sample.

1 nos, 100 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 250 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section,

size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB -6 Nos.

(b) 40 Amps, TPN, MCB - 8 nos

(c ) Automatic changeover for DG set

Panel complete as above Each 1 315000.00 315000.00

Providing and fixing MV danger notice plate of 200mm x 150mm made of mild steel, atleast 2

17 2.21 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour on Nos. 6 269.00 1614.00

front side as required

Providing and fixing HT danger notice plate of 250mm x 200mm made of mild steel, atleast 2

18 2.22 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour on Nos. 2 292.00 584.00

front side as required

Supply, Installation, Testing and Commissiong of 20 KVA True Online Double Conversion

UPS 3Phase Input - 3Phase Output IGBT Based Rectifier and IGBT Based Inverter

Batteries:12 V, SMF Amararaja/Exide with minimum VAH capacity of 15600 suitable for 30

minutes backup with ups Along with Accessories Rack, Interlinks, SFU, Parallel Kit, DC Cable

MR Upto 5 Meters complete in all respect as per the directions of the engineer in charge. UPS Nos. 1 469650.00 469650.00

should have availability of Input /Output isolator, Inbuilt manual bypass along with phase

sequence corrector. UPS Efficiency shall not be less than 94% from 25% to 100% Load

Total of Electrical items 1217401.00 2142840.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR HVAC TOTAL

S No 2019/DSR DESCRIPTION UNIT QUANTITY RATE AMOUNT

EM 2018 DSR (INR) NON-DSR (INR)

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant

Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating,

having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors

for above 14 HP modules, microprocessor based Controller, top discharge type condensing

unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as

1 1.0 required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C per HP 56 16415.00 919240.00

ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3

Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and

ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not

less than 6.5 .

Supply, installation, testing and commissioning of following minimum capacity 4-way flow

VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media

pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill,

2 2.0 necessary supports, vibration isolation, cord less remote control etc., suitable for operation on

single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have

automatic force shut down provision in case of fire on receiving signal from BMS System. The

cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree

C WB temperature.

Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High

wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low

noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil,

electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary

3 3.0 accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply,

complete as required. The unit shall have automatic force shut down provision in case of fire

on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet

conditions of 27 Degree C DB and 19 Degree C WB temperature.

Lifting, Shifting, Supply, Installation, Testing & Commissioning of Interconnecting "Y" & "T"

4 4 Joints i.e. Refnet Joints/ Header with Insulation for refrigearnt piping

Providing and fixing stande alone split AC capacity of 1.5 tr Nos 2 78550.00 157100.00

Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing

of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,

5 5 complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing

including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell

elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for

Suction and Liquid lines, all accessories as per specifications etc. as required :

5.1 5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 40 245.00 9800.00

5.2 5.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 140 331.00 46340.00

5.3 5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 40 466.00 18640.00

Digitally signed by AMIT

5.4 5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 140 588.00 82320.00

5.5 5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 75 707.00 53025.00

5.6 5.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 75 865.00 64875.00

5.7 5.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 50 1022.00 51100.00

5.8 5.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 50 1108.00 55400.00

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit

Cable Trays with Covers

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray

7 4.6 (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in

convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders

including G.I. bolts & nuts, etc. as required.

7.1 4.6.8 300mm widthx62.5mm depthx2.0mm thickness meter 100 1190.00 119000.00

7.2 4.6.10 450mm widthx62.5mm depthx2.0mm thickness meter 100 1474.00 147400.00

Supply,installation,testing and commissioning of PVC drain water with necessary clamps,

8 MR fittings such as bends tees etc. and duly insulated.

40 mm dia (9 mm tick ins.) Rm 180 374.00 67320.00

Supply installation testing and commissioning Treated Fresh Air HRV capacity 800

CFM for Fresh Air Ventilation as per approved make

10 MR-2 Providing and fixing of 24 gaze GI Ducting rectangular as per required Sqm 20.00 3,350.00 67000.00

11 MR-3 Providing and fixing of Aluminium flexible Duct NOS 10.00 6,844.00 68440.00

12 MR-4 Providing and fixing powder coted louver and birdscreen for fresh air wall opening LOT 2.00 23,187.00 46374.00

13 MR-5 Providing and fixing of canvas connection NOS 2.00 11,210.00 22420.00

14 MR-6 Providing and fixing Grill NOS 20.00 2,655.00 53100.00

Total HVAC WORKS 2441868.00 1490240.00

Digitally signed by AMIT

UNIT QUANTITY RATE TOTAL TOTAL AMOUNT

UNIT QUANTITY RATE TOTAL TOTAL AMOUNT

S No Description

A. UTP Components for Data DSR (INR) NON-DSR (INR)

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors

for Connectivity of Hub room to End Point.High Speed Gigabit Ethernet

U/UTP, 250 MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply, Installation, Testing and Comissioning of I/O port for CAT6A cable

termination at Work Station end. Keystone Unshielded Outlet, 180DG C6

Supply , Installtion , Testing and Comissioning of CAT6A patch cord 2 Mtr (7

feet) for information outlet (I/O) to end user device connectivity.High Speed

Gigabit 24AWG U/UTP Patch Cord, LSZH, C6

Supply , Installtion , Testing and Comissioning of CAT6A patch cord 1 Mtr (3

feet) for information outlet (I/O) to Rack End Redantant device

connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord, LSZH, C6

Supply , Installtion , Testing and Comissioning of 24 port Loaded Jack Panel

for CAT6A cable termination at rack end. Data Active

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors

for Connectivity of Hub room to End Point.High Speed Gigabit Ethernet

U/UTP, 250 MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

termination at Work Station end. Keystone Unshielded Outlet, 180DG C6

Supply , Installtion , Testing and Comissioning of 24 port Loaded Staggred

Jack Panel for CAT6 cable termination at rack end. Voice Active

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 1 Mtr (3

feet) for information outlet (I/O) to end user device connectivity. (Rack end),

High Speed Gigabit 26AWG Patch Cord, LSZH, C6

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7

feet) for information outlet (I/O) to end user device connectivity.High Speed

Gigabit 24AWG U/UTP Patch Cord, LSZH, C6

Supply , Installtion , Testing and Comissioning of 2 Port British Style

Shuttered Face Plate white for I/O fixing at user side

Supply , Installtion , Testing and Comissioning of 24 port Loaded Staggred

Jack Panel for CAT6 cable termination at rack end. Riser Active

Supply , Installtion , Testing and Comissioning of 400 pair MDF box complete

with Krone Modules

Supply , Installtion , Testing and Comissioning of 50 pair riser cable

C Network Rack and Other Accessories

SITC of 42U 800x1000 Server Rack with perforation, Glass Door, Cable

19 managemenet, 6/16A power strips- 2 nos, Castors, 4 fan for cooling, Rack Nos. 1 80,000.00 80,000.00

should have shelves - 4 nos

15 Digitally signed by AMIT

S No Description UNIT QUANTITY RATE

IP BASED CCTV SYSTEM DSR (INR) NON-DSR (INR)

Supply, installation, testing and commissioning of 5MP 2.8mm/3.6mm

wide angle fixed lens IR Dome Camera 1/3" Progressive

Scan CMOS; H.265+/H.265/H.264+/H.264/MJPEG; Colour: 0.01 lux

VCA functions; 3 streams; 3D DNR; ICR; EXIR 2.0, up to 30m;

DC12V&PoE; Built-in micro SD/SDHC/SDXC slot.

Supply, installation testing and commissioning of Network Video

recorder Linux based to manage and control all the cameras from control

room. Software shall support maximum 32 channel with joystick

2 controller. 256Mbps Bit Rate Input Max(up to 32-ch IP video), 2 SATA Nos. 1 125650.00 125650.00

Interfaces, alarm I/O: 16/4, 1.5U case,19" with 2x4TB i.e. 8TB HDD inside

Supply, installation, testing and commissioning of Video Management

software enabling security related personnel to easily and remotely gather

video evidence, monitor live situations, and configure and maintain a

video surveillance system over Ethernet consisting of digital video

recorders (DVRs), hybrid digital video recorders, network video recorders

4 (NVRs), analogue video cameras, and IP video cameras should support Nos. 1 132650.00 132650.00

Detachable Viewers –users have the ability to detach Viewer panels and

move them to other (or the same) monitor(s). A maximum of two (2)

Viewers can be detached for a total of 75-up video tiles [two (2) detached

and one (1) core Viewer.

Supply Installation Testing & Commissioning of 43 inch Full HD LED

5 monitor including wall mount brackets/ clamps/ desk mounting stand. Nos. 1 62350.00 62350.00

6 Supply and fixing of RJ45 Connector Nos. 20 26.00 520.00

Supplying and fixing in position GI box for data outlet suitable for fixing of

RJ 45 face plate complete as required.

Supply & Fixing of PCB based Information Outlet (I/O) RJ45, TIA-568C

Category-6, Termination of Catergory-6 UTP Cable, UL listed, Shall

conform to Category-6 as per the EIA/TIA-568C.2, Shall support network

line speeds up to 1 Gbps, Shall have RJ-45 type connector with bend

limiting and strain relief boot for securing IDC contacts from external

forces and for maintaining the bend radius of the cable, Shall have

8 minimum durability of 750 mating cycles and 200 termination cycles. Nos. 10 240.00 2400.00

Shall be certified by independent labs like ETL/GHMT for compliance to

EIA/TIA-568C.2. The outlet shall be fixed in existing box & cover plate in

wall/furniture/floor complete as required.

Supply & Fixing of Single Faceplate, Single Port (RJ45-DATA) square

plate having spring shuttered front access for preventing ingress of

9 dust, dimension as per commercially available modular office furniture. Nos. 10 80.00 800.00

Supply & Laying in existing conduits/raceway/furniture of 4-pair

Unshielded twisted pair cable with a cross filler (+), meeting Category 6

standards as per TIA-568C.2. The cable shall be tested till 600 MHz or

more from independent laboratories like ETL for 4 connections. Test

Certificate from independent labs like ETL shall be required.

Supply & Fixing of UTP Jack Panel UL listed, loaded with 24 no's UTP

ports for PCB based IO Jacks (RJ45, TIA-568C Category-6), having

integrated bonding bar or other mechanism for grounding, loaded

with individually replaceable 24 nos. Category-6 I/O Jacks complying

with TIA-568.C.2. Shall be 6 port module construction for better cable

dressing at the rear. The jacks shall have RJ-45 type connector with

bend limiting and strain relief boot for securing IDC contacts from external

forces and for maintaining the bend radius of the cable.

16 Digitally signed by AMIT

Supplying & Fixing of Category 6, UTP patch cords constructed of

24 AWG unshielded twisted pair stranded copper cable with an enhanced

performance modular plug at each end. Patch cord cable shall be offered

in multiple coloured UTP cable for design flexibility with a clear strain relief

boot on each modular plug. All patch cords shall be compatible with both

T568A and T568B wiring schemes. UTP Cable, 2 Meter.

Supplying & Fixing of Category 6, UTP patch cords constructed of

24 AWG unshielded twisted pair stranded copper cable with an enhanced

performance modular plug at each end. Patch cord cable shall be offered

13 in multiple coloured UTP cable for design flexibility with a clear strain relief Nos. 10 275.00 2750.00

boot on each modular plug. All patch cords shall be compatible with both

T568A and T568B wiring schemes. UTP Cable, 1 Meter.

17 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - LIGHTING WORKS

S NO DSR/MR Description Unit QTY Rate DSR AMOUNT NON DSR AMOUNT

Supply, Installation, Testing and Commissioing of Recessed downlightwith

HPE (High-Performance Efficiency) with LED (Light Emitting Diode), system

power: 12 W, Luminous flux of luminaire 1320 lm, 110 LM/W system efficacy,

Colour temperature of 4000 K, Neutral white, CRI > 80, 230V constant current

driver, 70% of luminous flux after 50,000 operating hours; energy-efficient

LEDs, direct light emission, housing in die-cast aluminium, Polyester powder

2 MR white coloured coat applied over a 5-stage pre-treatment trim, prismatic no 240 1650.00 396000.00

diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN LOW

SMOKE) wiring, Electronic control gear,

Protection class II, IP 40, Ø = 175 mm, DA(Ø) = 160 mm, H = 59 mm

Supply, Installation, Testing and Commissioing of Pendant/Recessed luminaire

with LED (Light Emitting Diode), system power 28 W, luminous flux of

luminaire 3080 lm, 110 LM/W system efficacy, direct light emission CRI>80,

colour temperature of 4000K, Neutral white, 230V constant current driver, 70%

of luminous flux after 50,000 operating hours, energy efficient LEDs, luminaire

profile in aluminium, Plastic moulded end caps, Polyester powder Aluminium

white coloured coat applied over a 5- stage pre-treatment, high efficiency glare-

3 MR free snap fit micro-prismatic diffuser for homogeneous light distribution, ZHLS no 25 5260.00 131500.00

(Zero Halogen Low Smoke) internal wiring, integral Electronic control gear,

adjustable suspender,

Protection class I, IP 20, L = 1199 mm, B = 75 mm, H = 90 mm, PL max =

Supply, Installation, Testing and Commisioning of Recessed luminaire with

LED (Light Emitting Diode), system power: 28 W, luminous flux of 2800 lm,

colour temperature of 4000 K, Neutral white, 230 V constant current driver,

70% of luminous flux after 50,000 operating hours, energy-efficient LEDs, CRI

> 80, CRI > 80, THD<5%, P.F>0.95, SDCM 3, direct light emission, Luminaire

housing in Aluminium Extrution, polyester white powder coat applied over a 5-

4 MR stage pre-treatment, Opal diffuser for glare-free uniform light, integral no 80 3690.00 295200.00

electronic control gear,

Protection class I, IP40,

18 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - FIRE ALARM

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

Supplying, installation, testing & commissioning of smoke detector with builtin LED and

1 17.1.2 mounting base complete with all connections etc. as required. No 40 1153.00 46120.00

Supplying, installation, testing & commissioning of manual call boxes of MS construction in

2 17.2.5 surface/recess with stainless steel chain & hammer assembly complete with glass and push No 4 474.00 1896.00

button etc. as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as required.

Supplying, installation, testing & commisssioning of intelligent addressable programmable

5 17.2.6 sounder complete as required. No 4 2651.00 10604.00

Supplying, installation, testing & commissioning of addressable fire control module complete as

Supplying, installation, testing & commissioning of addressable phone control module complete

Supplying, installation, testing & commissioning of addressable manual call point complete as

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

14 17.5.2 copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete Mtr. 200 173.00 34600.00

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the

15 17.5.3 existing surface / recessed steel conduit of following pairs, cores and size including connections

and interconnections etc. as required.

Supply onstallation testing and commissioning of 4 loop conventional fire panel as per direction

of engineer in charge

TOTAL FIRE ALARM WORKS 352997.00 0.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FIRE PIPING, HYDRANTS, SPRINKLERS AND ACCESSORIES

S No DSR 2022/ DESCRIPTION QTY UNIT RATE TOTAL TOTAL AMOUNT

S No DSR 2022/ DESCRIPTION QTY UNIT RATE TOTAL TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Providing, laying, testing & commissioning of 'C' class

heavy duty MS pipe conforming to IS 3589/IS 1239

including Welding, fittings like elbows, tees, flanges,

18.7 tapers, nuts bolts, gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel paint

of required shade complete as required :

Providing, fixing, testing & commissioning of 15mm dia

18.21 quartzoid bulb type sprinklers of rating 68 degree

2 centigrade with required accessories :

18.21.1 Pendant type 266 Each 522.00 138852.00

Supplying, installation, testing & commissioning of

sprinkler flexible pipe (UL Listed) of stainless steel

complete with 15 NPT on reducer thread with maximum

working pressure of 175 PSI test pressure of 875 PSI

3 18.25 (Burst) with branch line (Inlet) 25mm NPT male thread to

sprinkler head (Outlet) 15mm NPT female thread with

reducer, nipple, 2 side brackets, center bracket, stockbar

of following sizes complete as required.

Providing and fixing ISI Marked of approved make Fire

4 Extinguishers complete with all accessories as per

manufacturer's specifications.

a) CO2 gas nozzle type - 9 Litre capacity (IS:15683). 4 NOS 16500.00 66000.00

Mechanical Foam gas cartridge type. 9 Kg capacity

ABC dry powder stored pressure type 6 kg capacity

Digitally signed by AMIT

Specifications Rate Qty Amount

DGM Table Supplying and placing in position of main table as per drawing .The table shall be made out of

25mm thick pre -laminated particle board of approved shade. The working and non working

edges shall be finished with machine pressed with 2mm PVC egdge banding. The table top

shall be supported with MS powder coated "C" shape leg of size 50mm x 50mm with connectors

of size 40mm x 40mm. The front modesty are made out of 18mm thick prelaminated particle

board with 2mm thk pvc edge banding. The table shall be provisioned with Side unit of overall

size: 1800mm(L) x 450mm(D) x 675mm(H) . Side storage having a provision for three equal

1 drawer unit and two openable shutter & one open storage with shelf in it. The Side unit top 40,000 5.00 2,00,000.00

shall be made out of 18mm thick pre laminated particle board and rest all storage to be made

out of 18mm thick pre laminated particle board. Provision of Junction box, wire raceway and 6

module fliptop box for wire passing or as per site requirement.Main Table Dimension (L)1800mm

X (D) 900mm X (H)750mm overall Side Runer Dimension (L)1800mm X (D) 450mm X (H) 675mm

DGM High Supplying and placing in position of 360 degrees revolving high back chair . The chair of Size :-

Back Chair (W)590mm X (D)505mm X (H)1180mm - 1280mm. The chair shall be ergonomically design

contour lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and

back) upholstered with leatheritte and cut foam. The chrome plated loop armrest with padded

2 upholstery is provided for extra comfort. The chair shall be provided with pneumatic height 15,000 5.00 75,000.00

adjustment which shall have stroke of 10.0

+/- 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30- 35 (+/-

2kg /m3) Dimensions The backrest has a foam of 28kg/m3.

DGM Visitor Supplying and placing in position of medium back of size: (W)610mm X (D)505mm X

Back Chair (H)990mm.A contemporary design with an all black finish, . Material & subtype:Premium

Leatherette, Colour & Colour Family:Black, Dimension(W)610mm X (D)505mm X (H)990mm, Back

Type:Cantilever, Base:Cantilever Frame, Base Type:Cantilever, Maximum Seating Height:19".The

Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with

polyurethane foam, chair seat has foam of density 32-35 kg/m3. The backrest has a foam of

2 seater sofa Supplying, and placing in position of sofa with premium Leatherette upholstery adds class to

the soft cushioned backrest and seating. Material & subtype:Premium Leatherette, Colour &

Colour Family:as per requirement, Seating Height:16.14"

,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern, Texture:Two Tone. steam beech

solid wood have used for framing construction of sofa .The seat cushion is made of multi

4 layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 38,000 17.00 6,46,000.00

1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch

strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. 2

seater Dimension(L)1390mm X (D)750mm X (H)710mm

Digitally signed by AMIT

Specifications Rate Qty Amount

3 seater sofa Supplying, and placing in position of sofa with premium Leatherette upholstery adds class to

the soft cushioned backrest and seating. Material & subtype:Premium Leatherette, Colour &

Colour Family:as per requirement, Seating Height:16.14"

,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern, Texture:Two Tone. steam beech

solid wood have used for framing construction of sofa .The seat cushion is made of multi

5 layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 47,000 1.00 47,000.00

1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch

strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. 2

seater Dimension(L)1890mm X (D)750mm X (H)710mm

Single seater Supplying, and placing in position of sofa with premium Leatherette upholstery adds class to

sofa the soft cushioned backrest and seating. Material & subtype:Premium Leatherette, Colour &

Colour Family:as per requirement, Seating Height:16.14"

,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern, Texture:Two Tone. steam beech

solid wood have used for framing construction of sofa .The seat cushion is made of multi

6 layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 20,000 2.00 40,000.00

1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch

strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. 2

seater Dimension(L)890mm X (D)750mm X (H)710mm

AGM Table Supplying and placing in position of main table .The table shall be made out of 25mm thick pre -

laminated particle board of approved shade. The working and non working edges shall be

finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported

with MS powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x

40mm. The front modesty are made out of 18mm thick prelaminated particle board with 2mm

thk pvc edge banding. The table shall be provisioned with Side unit of overall size: 1800mm(L)

x 450mm(D) x 675mm(H) . Side storage having a provision for three equal drawer unit and two

7 openable shutter & one open storage with shelf in it. The Side unit top shall be made out of 20,000 8.00 1,60,000.00

18mm thick pre laminated particle board and rest all storage to be made out of 18mm thick

pre laminated particle board. Provision of Junction box, wire raceway and 6 module fliptop

box for wire passing or as per site requirement. Main Table Dimension (L)1800mm X (D) 900mm

X (H)750mm overall Side Runer Dimension (L)1800mm X (D) 450mm X (H) 675mm

Digitally signed by AMIT

Specifications Rate Qty Amount

AGM High Supplying and placing in position of 360 degrees revolving high back chair of size: 660mm (L) x

Back Chair 490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof

plywood and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood

(IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be

provided with self tension single locking mechanism and pneumatic height adjustment which

8 shall have stroke of 10.0 +/- 0.3 cm .The black .The pneumatic height adjustment shall have 15,000 8.00 1,20,000.00

adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam,

chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. adjustable

arm rest and head rest

AGM Visitor Supplying and placing in position of medium back chair of size: (W)610mm X (D)505mm X

chair (H)990mm.A contemporary design with an all black finish, . Material & subtype:Premium

Leatherette, Colour & Colour Family:Black, Dimension(W)610mm X (D)505mm X (H)990mm, Back

Type:Cantilever, Base:Cantilever Frame, Base Type:Cantilever, Maximum Seating Height:19".The

Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with

polyurethane foam, chair seat has foam of density 32-35 kg/m3. The backrest has a foam of

GM Table Supplying and placing in position of main table as per photograph/drawing .The table shall be

made out of 25mm thick pre -laminated particle board of approved shade. The working and

non working edges shall be finished with machine pressed with 2mm PVC egdge banding. The

table top shall be supported with MS powder coated "C" shape leg of size 50mm x 50mm with

connectors of size 40mm x 40mm. The front modesty are made out of 18mm thick prelaminated

particle board with 2mm thk pvc edge banding. The table shall be provisioned with Side unit of

overall size: 1800mm(L) x 450mm(D) x 675mm(H) . Side storage having a provision for three

10 equal drawer unit and two openable shutter & one open storage with shelf in it. The Side unit 45,000 1.00 45,000.00

top shall be made out of 18mm thick pre laminated particle board and rest all storage to be

made out of 18mm thick pre laminated particle board. Provision of Junction box, wire raceway

and 6 module fliptop box for wire passing or as per site requirement.Main Table Dimension

(L)2100mm X (D) 900mm X (H)750mm overall Side Runer Dimension (L)2100mm X (D) 450mm X

GM High Supplying and placing in position of 360 degrees revolving high back chair . The chair of Size :-

Back Chair (W)590mm X (D)505mm X (H)1180mm - 1280mm. The chair shall be ergonomically design

contour lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and

back) upholstered with leatheritte and cut foam. The chrome plated loop armrest with padded

11 upholstery is provided for extra comfort. The chair shall be provided with pneumatic height 25,000 1.00 25,000.00

adjustment which shall have stroke of 10.0

+/- 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30- 35 (+/-

2kg /m3) Dimensions The backrest has a foam of 28kg/m3.

Digitally signed by AMIT

Specifications Rate Qty Amount

GM Visitor Supplying and placing in position of medium back chair of size: (W)610mm X (D)505mm X

Chair (H)990mm.A contemporary design with an all black finish, . Material & subtype:Premium

Leatherette, Colour & Colour Family:Black, Dimension(W)610mm X (D)505mm X (H)990mm, Back

Type:Cantilever, Base:Cantilever Frame, Base Type:Cantilever, Maximum Seating Height:19".The

Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with

polyurethane foam, chair seat has foam of density 32-35 kg/m3. The backrest has a foam of

CGM Table Supplying and placing in position of main table .The table shall be made out of 25mm thick pre -

laminated particle board of approved shade. The working and non working edges shall be

finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported

with MS powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x

40mm. The front modesty are made out of 18mm thick prelaminated particle board with 2mm

thk pvc edge banding. The table shall be provisioned with Side unit of overall size: 1800mm(L)

x 450mm(D) x 675mm(H) . Side storage having a provision for three equal drawer unit and two

13 openable shutter & one open storage with shelf in it. The Side unit top shall be made out of 50,000 1.00 50,000.00

18mm thick pre laminated particle board and rest all storage to be made out of 18mm thick

pre laminated particle board. Provision of Junction box, wire raceway and 6 module fliptop

box for wire passing or as per site requirement.Main Table Dimension (L)2400mm X (D) 900mm X

(H)750mm overall Side Runer Dimension (L)2100mm X (D) 450mm X (H) 675mm

CGM High Supplying and placing in position of 360 degrees revolving high back chair . The chair of Size :-

Back Chair (W)590mm X (D)505mm X (H)1180mm - 1280mm. The chair shall be premium design design

contour lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and

back) upholstered with leatheritte and cut foam. The chrome plated loop armrest with padded

14 upholstery is provided for extra comfort. The chair shall be provided with pneumatic height 30,000 1.00 30,000.00

adjustment which shall have stroke of 10.0

+/- 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30- 35 (+/-

2kg /m3) Dimensions The backrest has a foam of 28kg/m3.

CGM Visitor Supplying and placing in position of medium back chair of size: (W)610mm X (D)505mm X

Chair (H)990mm.A contemporary design with an all black finish, . Material & subtype:Premium

Leatherette, Colour & Colour Family:Black, Dimension(W)610mm X (D)505mm X (H)990mm, Back

Type:Cantilever, Base:Cantilever Frame, Base Type:Cantilever, Maximum Seating Height:19".The

Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with

polyurethane foam, chair seat has foam of density 32-35 kg/m3. The backrest has a foam of

Digitally signed by AMIT

Specifications Rate Qty Amount

PS Table Supplying and placing in position of main table .The table shall be made out of 25mm thick pre -

laminated particle board of approved shade. The working and non working edges shall be

finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported

with MS powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x

40mm. The front modesty are made out of 18mm thick prelaminated particle board with 2mm

thk pvc edge banding. The table shall be provisioned with Side unit of overall size: 1800mm(L)

x 450mm(D) x 675mm(H) . Side storage having a provision for three equal drawer unit and two

16 openable shutter & one open storage with shelf in it. The Side unit top shall be made out of 20,000 1.00 20,000.00

18mm thick pre laminated particle board and rest all storage to be made out of 18mm thick

pre laminated particle board. Provision of Junction box, wire raceway and 6 module fliptop

box for wire passing or as per site requirement. Main Table Dimension (L)1800mm X (D) 900mm

X (H)750mm overall Side Runer Dimension (L)1800mm X (D) 450mm X (H) 675mm

PS High Back Supplying and placing in position of 360 degrees revolving high back chair of size: 660mm (L) x

Chair 490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof

plywood and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood

(IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be

provided with self tension single locking mechanism and pneumatic height adjustment which

17 shall have stroke of 10.0 +/- 0.3 cm .The black .The pneumatic height adjustment shall have 15,000 1.00 15,000.00

adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam,

chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. adjustable

arm rest and head rest

PS Visitor Supplying and placing in position of 360 degrees revolving medium back chair of size: 660mm

Chair (L) x 490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof

plywood and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood

(IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be

provided with self tension single locking mechanism and pneumatic height adjustment which

18 shall have stroke of 10.0 +/- 0.3 cm .The black .The pneumatic height adjustment shall have 7,500 2.00 15,000.00

adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam,

chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. adjustable

arm rest and head rest

Digitally signed by AMIT

Specifications Rate Qty Amount

VISITING Supplying and placing in position of main table .The table shall be made out of 25mm thick pre -

CMD/DMD laminated particle board of approved shade. The working and non working edges shall be

Table finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported

with MS powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x

40mm. The front modesty are made out of 18mm thick prelaminated particle board with 2mm

thk pvc edge banding. The table shall be provisioned with Side unit of overall size: 1800mm(L)

x 450mm(D) x 675mm(H) . Side storage having a provision for three equal drawer unit and two

19 openable shutter & one open storage with shelf in it. The Side unit top shall be made out of 50,000 1.00 50,000.00

18mm thick pre laminated particle board and rest all storage to be made out of 18mm thick

pre laminated particle board. Provision of Junction box, wire raceway and 6 module fliptop

box for wire passing or as per site requirement.Main Table Dimension (L)2400mm X (D) 900mm X

(H)750mm overall Side Runer Dimension (L)2100mm X (D) 450mm X (H) 675mm

VISITING Supplying and placing in position of 360 degrees revolving high back chair . The chair of Size :-

CMD/DMD (W)590mm X (D)505mm X (H)1180mm - 1280mm. The chair shall be premium design design

High Back contour lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and

chair back) upholstered with leatheritte and cut foam. The chrome plated loop armrest with padded

upholstery is provided for extra comfort. The chair shall be provided with pneumatic height

20 adjustment which shall have stroke of 10.0 30,000 1.00 30,000.00

+/- 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30- 35 (+/-

2kg /m3) Dimensions The backrest has a foam of 28kg/m3.

CMD/DMD Supplying and placing in position of medium back cantilever chair of size: (W)610mm X

Visitor chair (D)505mm X (H)990mm.A contemporary design with an all black finish, . Material &

subtype:Premium Leatherette, Colour & Colour Family:Black, Dimension(W)610mm X (D)505mm

X (H)990mm, Back Type:Cantilever, Base:Cantilever Frame, Base Type:Cantilever, Maximum

Seating Height:19".The Seat & back are made up of 12mm thk hot pressed plywood upholstered

with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The backrest

has a foam of 28kg/m3.

Digitally signed by AMIT

Specifications Rate Qty Amount

BMO Table Supplying and placing in position of main table.The table shall be made out of 25mm thick pre -

laminated particle board of approved shade. The working and non working edges shall be

finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported

with MS powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x

40mm. The front modesty are made out of 18mm thick prelaminated particle board with 2mm

thk pvc edge banding. The table shall be provisioned with Side unit of overall size: 1800mm(L)

x 450mm(D) x 675mm(H) . Side storage having a provision for three equal drawer unit and two

22 openable shutter & one open storage with shelf in it. The Side unit top shall be made out of 25,000 1.00 25,000.00

18mm thick pre laminated particle board and rest all storage to be made out of 18mm thick

pre laminated particle board. Provision of Junction box, wire raceway and 6 module fliptop

box for wire passing or as per site requirement. Main Table Dimension (L)1800mm X (D) 900mm

X (H)750mm overall Side Runer Dimension (L)1800mm X (D) 450mm X (H) 675mm

BMO High Supplying and placing in position of 360 degrees revolving high back chair of size: 660mm (L) x

Back chair 490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof

plywood and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood

(IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be

provided with self tension single locking mechanism and pneumatic height adjustment which

23 shall have stroke of 10.0 +/- 0.3 cm .The black .The pneumatic height adjustment shall have 15,000 1.00 15,000.00

adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam,

chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. adjustable

arm rest and head rest

BMO Visitor Supplying and placing in position of 360 degrees revolving medium back chair of size: 660mm

chair (L) x 490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof

plywood and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood

(IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be

provided with self tension single locking mechanism and pneumatic height adjustment which

24 shall have stroke of 10.0 +/- 0.3 cm .The black .The pneumatic height adjustment shall have 7,500 2.00 15,000.00

adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam,

chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. adjustable

arm rest and head rest

Digitally signed by AMIT

Specifications Rate Qty Amount

ISARC Table Supplying and placing in position of main table.The table shall be made out of 25mm thick pre -

laminated particle board of approved shade. The working and non working edges shall be

finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported

with MS powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x

40mm. The front modesty are made out of 18mm thick prelaminated particle board with 2mm

thk pvc edge banding. The table shall be provisioned with Side unit of overall size: 1800mm(L)

x 450mm(D) x 675mm(H) . Side storage having a provision for three equal drawer unit and two

25 openable shutter & one open storage with shelf in it. The Side unit top shall be made out of 25,000 1.00 25,000.00

18mm thick pre laminated particle board and rest all storage to be made out of 18mm thick

pre laminated particle board. Provision of Junction box, wire raceway and 6 module fliptop

box for wire passing or as per site requirement. Main Table Dimension (L)1800mm X (D) 900mm

X (H)750mm overall Side Runer Dimension (L)1800mm X (D) 450mm X (H) 675mm

ISARC High Supplying and placing in position of 360 degrees revolving high back chair of size: 660mm (L) x

Back chair 490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof

plywood and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood

(IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be

provided with self tension single locking mechanism and pneumatic height adjustment which

26 shall have stroke of 10.0 +/- 0.3 cm .The black .The pneumatic height adjustment shall have 15,000 1.00 15,000.00

adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam,

chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. adjustable

arm rest and head rest

ISARC Visitor Supplying and placing in position of 360 degrees revolving medium back chair of size: 660mm

chair (L) x 490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof

plywood and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood

(IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be

provided with self tension single locking mechanism and pneumatic height adjustment which

27 shall have stroke of 10.0 +/- 0.3 cm .The black .The pneumatic height adjustment shall have 7,500 3.00 22,500.00

adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam,

chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. adjustable

arm rest and head rest

Digitally signed by AMIT

Specifications Rate Qty Amount

BO-IN Charge Supplying and placing in position of main table as per photograph/drawing .The table shall be

Table made out of 25mm thick pre -laminated particle board of approved shade. The working and

non working edges shall be finished with machine pressed with 2mm PVC egdge banding. The

table top shall be supported with MS powder coated "C" shape leg of size 50mm x 50mm with

connectors of size 40mm x 40mm. The front modesty are made out of 18mm thick prelaminated

particle board with 2mm thk pvc edge banding. The table shall be provisioned with Side unit of

overall size: 1800mm(L) x 450mm(D) x 675mm(H) . Side storage having a provision for three

28 equal drawer unit and two openable shutter & one open storage with shelf in it. The Side unit 25,000 1.00 25,000.00

top shall be made out of 18mm thick pre laminated particle board and rest all storage to be

made out of 18mm thick pre laminated particle board. Provision of Junction box, wire raceway

and 6 module fliptop box for wire passing or as per site requirement. Main Table Dimension

(L)1800mm X (D) 900mm X (H)750mm overall Side Runer Dimension (L)1800mm X (D) 450mm X

BO-IN High Supplying and placing in position of 360 degrees revolving high back chair of size: 660mm (L) x

Back chair 490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof

plywood and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood

(IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be

provided with self tension single locking mechanism and pneumatic height adjustment which

29 shall have stroke of 10.0 +/- 0.3 cm .The black .The pneumatic height adjustment shall have 15,000 1.00 15,000.00

adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam,

chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. adjustable

arm rest and head rest

BO-IN Visitor Supplying and placing in position of 360 degrees revolving medium back chair of size: 660mm

chair (L) x 490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof

plywood and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood

(IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be

provided with self tension single locking mechanism and pneumatic height adjustment which

30 shall have stroke of 10.0 +/- 0.3 cm .The black .The pneumatic height adjustment shall have 10,000 3.00 30,000.00

adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam,

chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. adjustable

arm rest and head rest

Digitally signed by AMIT

Specifications Rate Qty Amount

Meeting Table Supplying and placing in position of conference table of required size. The table of size:

4050mm (L) x 1200mm (W) x 750mm (H). The work surface top should be of thickness 42mm top

prelaminated particle board with 2mm thick PVC edge banding. The side panel are made up

of 36mm thick prelaminated particle & modesty panel are made out of 25mm thick

prelaminated particle board with 2mm thick PVC edge banding. The wire carrier should be

made from 0.6mm thick CRCA & powder coated 40-50 microns. Also having a provision of 6

module flip top box & metal raceway for wire flow.

Meeting Chair Supplying and placing in position of 360 degrees revolving medium back chair of size: 660mm

(L) x 490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof

plywood and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood

(IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be

provided with self tension single locking mechanism and pneumatic height adjustment which

32 shall have stroke of 10.0 +/- 0.3 cm .The black .The pneumatic height adjustment shall have 10,000 8.00 80,000.00

adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam,

chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. adjustable

arm rest and head rest

Conference Supplying and placing in position of conference table of required size as per image/drawing.

Table The table of size: 4050mm (L) x 1200mm (W) x 750mm (H). The work surface top should be of

thickness 42mm top prelaminated particle board with 2mm thick PVC edge banding. The side

panel are made up of 36mm thick prelaminated particle & modesty panel are made out of

33 25mm thick prelaminated particle board with 2mm thick PVC edge banding. The wire carrier 1,50,000 1.00 1,50,000.00

should be made from 0.6mm thick CRCA & powder coated 40-50 microns. Also having a

provision of 6 module flip top box & metal raceway for wire flow.

Conference Supplying and placing in position of 360 degrees revolving medium back chair of size: 660mm

Chair (L) x 490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof

plywood and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood

(IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be

provided with self tension single locking mechanism and pneumatic height adjustment which

34 shall have stroke of 10.0 +/- 0.3 cm .The black .The pneumatic height adjustment shall have 12,500 16.00 2,00,000.00

adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam,

chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. adjustable

arm rest and head rest

Digitally signed by AMIT

Specifications Rate Qty Amount

Fixed Chair Supplying and placing in position of 360 degrees revolving medium back chair of size: 660mm

(L) x 490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof

plywood and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood

(IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be

provided with self tension single locking mechanism and pneumatic height adjustment which

35 shall have stroke of 10.0 +/- 0.3 cm .The black .The pneumatic height adjustment shall have 7,500 14.00 1,05,000.00

adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam,

chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. adjustable

arm rest and head rest

Modular Dimesnion: 1500mm(L) x 1500mm(L) x 600mm(D) x 1200mm(H) Modular Workstation With

Workstation Side Top with 3 drawer Pedestal Size 1500W x 600D x 750/1200H.Partition NI-60mm Partition

Ht. 1200mm, Double Raceway systems Skirting label and below the table top . lower tile both

side laminated and upper tile inside side fabric, White

Board and white Tinted Glass . With Side Top Size 900W x 400D x 750H 25mm thick Gabel end

36 18mm thick MDF board., and 3Drawer top supported Pedestal unit Size 400W x 400D x 30,000 16.00 4,80,000.00

725H made in 18mm thick..Complete Made in MDF Board.. Laminate 1- Frosty White, Laminate2

For drawer Facia-Honkong Blue, Fabric-F 161 Dolphin Blue, Powder Coating-Munshel Gray.

and White Tinted Glass

Cubical side PARTITIONFOR CUBICALS MODEL:-NEO SPECIFICATION:- Tile Finishes : Above table top Level: Full

Fabric Tiles both side

Modular Supplying and placing in position of 360 degrees revolving medium back chair of size: 660mm

Workstation's (L) x 490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof

Chair plywood and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood

(IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be

provided with self tension single locking mechanism and pneumatic height adjustment which

38 shall have stroke of 10.0 +/- 0.3 cm .The black .The pneumatic height adjustment shall have 10,000 16.00 1,60,000.00

adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam,

chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. adjustable

arm rest and head rest

lenior Dimesnion: 1200mm(L)x 600mm(D) x 750mm(H) Modular Workstation With 1200mm, Double

Workstation Raceway systems Skirting label and below the table top . lower tile both side laminated and

upper tile inside side fabric, White

Board and white Tinted Glass . With Side Top Size 900W x 400D x 750H 25mm thick Gabel end

39 18mm thick MDF board., and 3Drawer top supported Pedestal unit Size 400W x 400D x 22,000 50.00 11,00,000.00

725H made in 18mm thick..Complete Made in MDF Board.. Laminate 1- Frosty White, Laminate2

For drawer Facia-Honkong Blue, Fabric-F 161 Dolphin Blue, Powder Coating-Munshel Gray.

and White Tinted Glass

Digitally signed by AMIT

Specifications Rate Qty Amount

lenior Supplying and placing in position of 360 degrees revolving medium back chair of size: 660mm

Workstation's (L) x 490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof

Chair plywood and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood

(IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be

provided with self tension single locking mechanism and pneumatic height adjustment which

40 shall have stroke of 10.0 +/- 0.3 cm .The black .The pneumatic height adjustment shall have 10,000 50.00 5,00,000.00

adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam,

chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. adjustable

arm rest and head rest

Reception Supplying and placing in position of main table.The table shall be made out of 25mm thick pre -

Table laminated particle board of approved shade. The working and non working edges shall be

finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported

with MS powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x

40mm. The front modesty are made out of 18mm thick prelaminated particle board with 2mm

thk pvc edge banding. The table shall be provisioned with Side unit of overall size: 1800mm(L)

x 450mm(D) x 675mm(H) . Side storage having a provision for three equal drawer unit and two

41 openable shutter & one open storage with shelf in it. The Side unit top shall be made out of 35,000 2.00 70,000.00

18mm thick pre laminated particle board and rest all storage to be made out of 18mm thick

pre laminated particle board. Provision of Junction box, wire raceway and 6 module fliptop

box for wire passing or as per site requirement. Main Table Dimension (L)1350mm X (D) 900mm

X (H)750mm overall Side Runer Dimension (L)1200mm X (D) 450mm X (H) 675mm

Reception Supplying and placing in position of 360 degrees revolving medium back chair of size: 660mm

chair (L) x 490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof

plywood and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood

(IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be

provided with self tension single locking mechanism and pneumatic height adjustment which

42 shall have stroke of 10.0 +/- 0.3 cm .The black .The pneumatic height adjustment shall have 10,000 2.00 20,000.00

adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam,

chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. adjustable

arm rest and head rest

Pantry Table Providing & Installation of Pantry table of size 1.2m x .9m x 1.05m (ht) made out of 19mm thk.

Commercial Board finished in Recon veneer and DU Pont Coreanof approved shade as per

43 design. The Recon surfaces to be white Duco painted. A glass top od width 0.2m on SS pegs to 10,000 10.00 1,00,000.00

be provided above table. One (1) number Drawer pedestal with 3 drawers to be provided

under the table.

44 Pantry chairs Providing & Installation of Pantry chairs of required dimension and as per instruction of EIC 3,260 60.00 1,95,600.00

Digitally signed by AMIT

Specifications Rate Qty Amount

45 TABLE CENTRE TABLE WITH GLASS TOP 16,500.00 2.00 33,000.00

46 TABLE SIDE TABLE WITH WOODEN STRUCTURE 12,500.00 5.00 62,500.00

Openable The storage top 25 mm thick, shutter and side panels are made of 18mm thick and back panel

Shutter is made of 09mm thick MDF of approved shade. All the edges of storage surface shall be

storage provided with machine pressed imported PVC lipping glued with hot melt EVA glue free from

any VOC with free groove handle and suitable lock. All exposed area PVC edge lipping

Total Amount 68,33,000.00

Total Amount 68,33,000.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: SIGNAGE

S No Description Unit Qty Unit price DSR Amount Non-DSR Amount

1 RECEPTION AND OUTER AREA 3D ACRYLIC SIGNAGE

Providing, fabricating and fixing of 3D Acrylic Letters raised 1.5 inches

of required size and shape with arrangement of screws in the letters itself

for mounting on the walls or pasting using 3M VHP Tape. Fixing

complete as per directions of the engineer. The Sizes would be Each 1 1,25,650.00 125650.00

calculated in Sqft as per Logo Design provided.

Tentative Size 36"X60"

1 OUTER AREA 3D ACRYLIC SIGNAGE

Providing, fabricating and fixing of 3D Acrylic Letters raised 1.5 inches

of required size and shape with arrangement of screws in the letters itself

for mounting on the walls or pasting using 3M VHP Tape. Fixing

complete as per directions of the engineer. The Sizes would be Each 1 3,15,650.00 315650.00

calculated in Sqft as per Logo Design provided.

Tentative Size 42"X180"

TOTAL 441300.00

34 Digitally signed by AMIT