Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.7 LAccepted-AOC PO PS BANARHAT DIST JALPAIGURI PIN 735202 W B | JALPAIGURI | WEST BENGAL | 735202 | L1 | Accepted-AOC Lowest-1 | |
| 2 | L2₹28.9 L+₹27,831 (0.97%)Rejected-Finance GARRISON ENGINEER GE NORTH BINNAGURI | JALPAIGURI | WEST BENGAL | 735232 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹32.6 L+₹3.9 L (13.6%)Rejected-Finance R N COLONY PO BIRPARA DIST ALIPURDUAR W B PIN 735204 | ALIPURDUAR | WEST BENGAL | 735204 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹33.0 L+₹4.3 L (15.1%)Rejected-Finance DEPOPARA PO BINNAGURI PS BANARHAT DIST JALPAIGURI WEST BENGAL PIN 735 203 | JALPAIGURI | WEST BENGAL | 735203 | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹34.9 L+₹6.3 L (21.9%)Rejected-Finance 777 778 SASTRI NAGAR SARAT SARANI SUBHASPALLY BURNPUR BARDHAMAN WEST BENGAL 713325 UDYAM WB 23 0020628 | PASCHIM BARDHAMAN | WEST BENGAL | 713325 | L5 | Rejected-Finance Being L5 |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
31 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE North Binnaguri
Post Binnaguri Dist Jalpaiguri West Bengal Pin 735232
PROVISION OF PRESTRESSED CONCRETE POLE STEEL TUBULAR POLE LED SECURITY AND STREET LIGHTS AREA UNDER AGE EM NORTH BINNAGURI
2022_MES_549571_4
NIT No. 8701/ 44 / 2022-2023 / 17 / E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Binnaguri
As per NIT
8 documents required · 8 mandatory
₹500
Yes
GE North Binnaguri
₹86,000
Yes
14 Mar 2023
13 Jan 2023
2 Feb 2023
13 Jan 2023
31 Jan 2023
19 Jan 2023
Amount
SCHEDULE `A' ( ELECTRIFICATION) Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations of poles etc. and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil complete all as specified and directed.
Excavating in trenches, not exceeding 3 m wide and not exceeding 3 m in depth for foundations of poles etc. and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.
Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed .
Material and labour for laying well burnt old size bricks, fly ash bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified.
Supplying and fixing Galvanised mild steel pipe /tubing, light grade complete with all fittings of 40 mm bore dia, laid in trenches / under roads, fixed to poles/ walls with Mild steel clamps , bolts , nuts and washers as in cable protection complete all as specified and directed. Note :- Excavation & Earth work shall be measured and paid separately)
Material and labour for plain cement concrete 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in foundations/mass concrete for pole foundation and finishing the surface ecven & smooth withouit using extra cement including necessary form work complete all as specified.
Material and labour for plain cement concrete 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in foundations/mass concrete for pole foundation/ coping / pedestal of poles and stay and finishing the surface ecven & smooth withouit using extra cement including necessary form work complete all as specified.
Material and labour for plain cement concrete 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundations/mass concrete complete all as specified.
Material and labour for steel tubular poles complete with cast iron base palate, final taper plug bolts, nuts & screws as specified type 410 SP-55, 11 meter long including painting all external exposed steel surfaces with two coats of aliminium paints over a coat of red oxide zinc chrome primer and all internal surfaces and external surfaces in contact with concrete with two coats of black bitumenous paint complete all as specified and as directed. Note: Earth work and PCC work shall be measured and paid seperately under respective items
Material and labour for prestressed concrete pole 9.0 metres long, 102 mm x 172 mm at top and 102 mm x 279mm at bottom , class 10 complete all as specified and as directed. Note: Earth work and PCC work shall be measured and paid seperately under respective items
Supply and fixed of LED flood light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen equal to/greater than 11500 lumen, system wattage 100 Watt, Ingress protection IP-66 with all acessories including testing , necessary connection complete all as specified and directed.
Material and labour of LED street light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen equal to/greater than 6600 lumen, system wattage 60 Watt, Ingress protection IP-66 with all acessories complete all as specified and directed.
Supply, laying , testing LT underground electric power cable crossed linked XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross-sectional area 16 sqmm 4 core laid in trenches / laid under floor or fixed to walls/on poles / in ducts etc complete all as specified Note: (Excavation, earth work, sand cushioning, protection brick / tiles / block clamps nuts bolts washers and pipe shall be measured and paid separately under appropriate items)
Supplying and fixing in repair single run 3 core ,4.00 sqmm nominal cross sectional area multistranded copper conductor cable, over all PVC sheathed, 1100 Volts grade confirming to IS-694-2010 (FRLS) heavy duty cable PVC insulated and PVC sheathed from pole junction box to light fitting complete all as specified.
Supplying and fixing of single run, 2 core, 1.5 sqmm nominal cross sectional area multistranded copper conductor cable, over all PVC sheathed, 1100 Volts grade confirming to IS-694-2010 (FRLS) heavy duty cable PVC insulated and PVC sheathed from pole junction box to light fitting complete all as specified.
Supply and fixed of 20 mm nominal bore dia, UPVC pipes of pressure rating 10 kgf/cm2 fixed to pole, any type including provision MS clamp of size 20mm x 3mm flat at interval of 1.5 m length and painting with synthetic enemal complete all as specified and as directed
Supply and fixing of street light bracket made out of mild steel angle of size 50 mm x 50 mm x 5mm by cutting, welding and well finishing including MS clamp of flat iron complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer complete all as specified and directed.
Supply and fixing of street light bracket made out of GI pipe light grade 40 mm dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.5 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 40 x 6 mm suitable length 2 Nos complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer complete all as specified and directed.
Supply and fixed of powder coated Mild steel junction box of size 250 mm x 190 mm x 150 mm, out door type, weather proof, factory made out of CRCA sheet 2.00 mm thick CPRI Approved with front openable hinged door having rubber lining, painting internally and externally with powder coated locking arrangements with 4 Nos copper bus bars , 100 Amps, mounted on porcelain insulator, glands and lugs etc. including one No MCB SP, 6 Amps, 10 kA, fixed on insulator and fixed on box in DIN rail , fix to pole with suitable size of FI clamps, nuts , bolts and washers complete and including making good surface of existing surface and connections complete all as specified. Note : Rate quoted against the item will include for making suitable nitch and making good disturbed surfaces with using required PCC 1:2:4 type B0 / 15 mm thick rendering in cement mortar (1:4)
Supply and fixing of Time lite distribution board with in sheet steel enclouser of capacity 65 Amp comprising of 3 pole 65 Amp power contactor with coil voltage 415 Volt AC, MCB TPN 63 Amp 10 KA, Analog time switch and togle switch two way for manual and auto operation with and including internal connection with suitable size copper conductor wire complete all as specified and directed.
Material and labour for Earthing complete with galvanised mild steel earth plate electrode 600 mm x 600 mm x 6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 20 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.
Material & Labour for surface type point wiring with 1.50 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable of working voltage 1100 volts grade conforming to IS-694 Pt I & II of 2000 drawn through and including PVC conduit/ PVC caping casing of adequate size having a wall thickness not less than 1.5 mm with all accessories & making good the disturbed surface to its original specification), including provision of 1.5 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable as earth continuity conductor, connected to main switch / DBs or common earth dolly for one light / fan point / exhaust point/bell push point controlled by one 5 Amps one way switch complete all as specified and as directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.
Supply and fixed switch piano flush type, single pole , 6 Amps, one way complete all as specified.
Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.
Supply and fixing heavy duty exhaust fan 300 mm sweep MS body with antidust painting, 4 blade with heavy duty motor and double ball bearing, 1320 RPM, single phase 230/240 volts copper wounds, Air delivery -1600 CMH complete with all accessories as bird guard/ louvers shutters etc incl making connections with 3 core flexible multistranded copper conductor of size 0.75 Sqmm run through flexible pipe all as specified and as directed including cutting holes and making good the disturbed surfaces of walls in CM(1:4) and finishing the surface as per existing color scheme complete all as specified and as drected.
Material and labour for earthing complete with copper earth plate electrode 600 mm x 600 mm x 3.15mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using copper strip 20 x 3 mm as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.
Supply and fixed for 25 x 3 mm aluminium strip, earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or fixed to poles or roof with saddle and screw complete all as specified and as directed.
Supply and fixing in repairs Air termination, single pointed aluminium rod 12 mm dia and 300 mm long fixed nwith 2 Nos suitable size of nut and bolt with washer all as specified and as directed.
Supply and fixing in repairs Test point terminal block made of gun metal or Phosphorus bronze size 75x75x25 mm, drilled and screwed including 3 nos. 8 mm dia. 25 mm long hexagonal head screw all as specified and as directed.
Supply and fixed heavy duty porcelain insulator to fixed aluminium strips on roof top, wall including PVC plug and gutties, screws complete all as specified.
Supplying, laying, fixing in repairs 32 mm nominal bore dia,galvanized tube light grade for fixing of air termination on roof top including necessary PCC for fixing of tube complete all as specified and as directed.
L. B. SHARMA
M/s Om Prakash Agarwala
Shri Amarnath Sah
M/S NIKITA ENGINEERING CO
M/S MOHAN KUMAR BANSAL
M/S RELIABLE CONSTRUCTION CO.
BINOD TRADING CO.
BBKundu
M/S SINHA ENTERPRISE
M/S RATNESH KUMAR SINGH
M/s Sohini Construction
Bidder Name
L. B. SHARMA
M/S ASHOK ENTERPRISE
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .