Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.7 LAccepted-AOC CHEMMANATHUKARA VAIKOM | ₹5.7 L | L1 | Accepted-AOC Accepted vide Resolution No 2(4) dated 25/02/2026 of T V Puram GP |
| 2 | L2₹5.7 L+₹622.83 (0.11%)Rejected-AOC | ₹5.7 L+₹622.83 (0.11%) | L2 | Rejected-AOC Higher rate and hence not admitted |
| 3 | Rejected-Technical | - | - | Rejected-Technical High rates quoted |
| Sl No | Description | Qty | Unit | M.K.PADMAKUMAR L3 | RADHAKRISHNAN T L2 | ADARSH CONSTRUCTION L1 |
|---|---|---|---|---|---|---|
| 1.00School Maintenance - TV Puram LPS | ||||||
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 740.33 | kg | 184.27 ₹1,36,420.61 | 179.7 ₹1,33,037.3 | 179.51 ₹1,32,896.64 Lowest |
| 1.00 | OD457414/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 148.12 | sqm | 600.36 ₹88,925.32 | 574.76 ₹85,133.45 | 574.14 ₹85,041.62 Lowest |
| 1.00 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 16.1 | metre | 543.15 ₹8,744.72 | 522.68 ₹8,415.15 | 522.11 ₹8,405.97 Lowest |
| 1.00 | 50.12.4.2:Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately) | 70.08 | sqm | 999.6 ₹70,051.97 | 941.28 ₹65,964.9 | 940.26 ₹65,893.42 Lowest |
| 1.00 | 15.17.2:Dismantling steel work in single sections including dismembering and stacking within 50 metes lead in:Channels, angles, tees and flats | 539 | kg | 2.37 ₹1,277.43 | 2.2 ₹1,185.8 | 2.18 ₹1,175.02 Lowest |
| 1.01 | 21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | 38.54 | kg | 809.94 ₹31,218.33 | 782.5 ₹30,160.68 | 781.65 ₹30,127.92 Lowest |
| 2.00School Maintenance - Chemmanathukara School | ||||||
| 2.00 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil | 9.11 | cum | 257.63 ₹2,347.78 | 238.31 ₹2,171.72 | 238.05 ₹2,169.35 Lowest |
| 2.00 | OD452235/2025-2026:Dry rubble masonry in foundation and superstructure including packing to
compactness to line and levels including cost and conveyances etc complete (Modified
item DSR 60.7.1) | 9.11 | cum | 3,993.46 ₹36,392.4 | 3,693.96 ₹33,663.06 | 3,690 ₹33,626.97 Lowest |
Tender Value
₹6.1 L
EMD Value
₹15,346
Closing Date
20 Feb 2026, 6:00 pmClosed
Assistant Engineer
Assistant Engineer LID Ew Section T V Puram
PRO NO 40/25-26 VARIOUS SCHOOL MAINTENANCE IN T V PURAM
2026_LSGD_835554_1
31/AE/TVPM/25-26
Open Tender
Civil Works - Others
Item Rate
240 days
T V Puram
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,355
Yes
₹15,346
Yes
20 Apr 2026
12 Feb 2026
23 Feb 2026
12 Feb 2026
20 Feb 2026
12 Feb 2026
12 Feb 2026 - 20 Feb 2026
School Maintenance - TV Puram LPS
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
OD457414/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)
50.12.4.2:Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately)
15.17.2:Dismantling steel work in single sections including dismembering and stacking within 50 metes lead in:Channels, angles, tees and flats
21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ).
School Maintenance - Chemmanathukara School
2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil
OD452235/2025-2026:Dry rubble masonry in foundation and superstructure including packing to compactness to line and levels including cost and conveyances etc complete (Modified item DSR 60.7.1)
5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
13.44.1:Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1405884.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.28 MB
SBD.pdf
Tender Documents • 0.96 MB
Priliminary.pdf
Tender Documents • 0.26 MB
Affidavit.pdf
Tender Documents • 0.24 MB
Formoftender.pdf
Tender Documents • 0.25 MB
Integrity.pdf
Other Document • 0.24 MB
Epayment.pdf
Other Document • 0.24 MB
BOQ_1405884.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .