Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹28Accepted-AOC | ₹28 | 1 | Accepted-AOC Award of Contract has been issued. |
| 2 | 1₹6.7 LAccepted-AOC | ₹6.7 L | 1 | Accepted-AOC Award of Contract has been issued. |
| 3 | 1₹17.5 LAccepted-AOC 114 GIDC MAKARPURA BARODA GUJRAT 390010 | BARODA | BARODA | GUJARAT | 390010 | ₹17.5 L | 1 | Accepted-AOC Award of Contract has been issued. |
| 4 | 0Rejected-Finance | - | 0 | Rejected-Finance Rejected |
| 5 | Rejected-Technical | - | - | Rejected-Technical Pre-Bid Meeting Not Attended by the Bidder |
| Sl No | Description | Qty | Unit | Spectoms Engineering P Ltd | R K FEED EQUIPMENTS | Sai Feed Equipment | Ishika Engineering Works |
|---|---|---|---|---|---|---|---|
| 1.00List of Spares - PART - A | |||||||
| 1.01SUPER JUMBO PELLET MILL | |||||||
| 1.02 | Super Jumbo Pellet Mill die – 3mm Hole-SS (675x815x350) | 1 | No | 3,41,600 ₹3,41,600 | 2,15,000 ₹2,15,000 Lowest | 3,92,840 ₹3,92,840 | 3,72,344 ₹3,72,344 |
| 1.03 | Pellet Mill Die for Layer Crumbs SS Chrome Die – 4 mm dia hole compression ratio 10-11 | 1 | No | 3,36,000 ₹3,36,000 | 2,10,000 ₹2,10,000 Lowest | 3,86,400 ₹3,86,400 | 3,66,240 ₹3,66,240 |
| 1.04 | Super Jumbo Press Roll Shell – 325x230x230mm | 1 | No | 38,640 ₹38,640 | 32,000 ₹32,000 Lowest | 44,436 ₹44,436 | 45,000 ₹45,000 |
| 1.05 | Super Jumbo Press Roll Assembly | 1 | No | 1,40,000 ₹1,40,000 Lowest | 8,70,000 ₹8,70,000 | 1,61,000 ₹1,61,000 | 1,52,600 ₹1,52,600 |
| 1.06 | Shear Pin – 30Dia x 104 mm long | 1 | No | 218 ₹218 Lowest | 450 ₹450 | 250 ₹250 | 250 ₹250 |
| 1.07 | Die Fixing Bolt HT Hex – M20x160L (1 set = 12 Nos) | 1 | Set | 2,044 ₹2,044 | 650 ₹650 Lowest | 2,351 ₹2,351 | 2,228 ₹2,228 |
| 1.08 | Front Wearing Ring Bolt HT Hex Bolt – M20x50L (1 set = 12 Nos) | 1 | Set | 1,400 ₹1,400 | 300 ₹300 Lowest | 1,854 ₹1,854 | 1,526 ₹1,526 |
| 1.09 | Front Die Cover Bolt HT Hex Bolt – M20x40L – (1Set =4 Nos) | 1 | Set | 459 ₹459 | 250 ₹250 Lowest | 528 ₹528 | 501 ₹501 |
Tender Value
Refer Docs
EMD Value
₹10,000
Closing Date
9 Jul 2025, 12:00 pmClosed
MANAGING DIRECTOR
West Bengal Livestock Development Corporation Ltd. Bldg. No. 2, LB-2, Sector- III, Salt Lake City, Kolkata - 700106
Procurement of spare parts for 200 TPD Poultry Feed Plant at Kalyani, D-23, Industrial Area, Post-Kalyani, Dist.-Nadia-741235 under West Bengal Livestock Development Corporation Limited for the year 2025-26
2025_ARD_868496_1
WBARD/WBLDC/NIT-912e/2025-26 Dated 24/06/2025
Open Tender
Supply
Percentage
3 days
Kalyani Feed Milling Plant, P.O.Kalyani Dist-Nadia
PRE BID MEETING (Mandatory) TO BE HELD ON 04/07/2025 at 2-00 P.M., H.Q. (West Bengal Livestock Development Corporation Ltd. Bldg. No. 2, LB-2, Sector- III, Salt Lake City, Kolkata - 700106)
8 documents required · 8 mandatory
₹0
₹10,000
Yes
H.Q., Salt Lake City, Kolkata - 700106
12 Jun 2026
24 Jun 2025
11 Jul 2025
24 Jun 2025
9 Jul 2025
24 Jun 2025
24 Jun 2025 - 9 Jul 2025
4 Jul 2025
List of Spares - PART - A
SUPER JUMBO PELLET MILL
Super Jumbo Pellet Mill die – 3mm Hole-SS (675x815x350)
Pellet Mill Die for Layer Crumbs SS Chrome Die – 4 mm dia hole compression ratio 10-11
Super Jumbo Press Roll Shell – 325x230x230mm
Super Jumbo Press Roll Assembly
Shear Pin – 30Dia x 104 mm long
Die Fixing Bolt HT Hex – M20x160L (1 set = 12 Nos)
Front Wearing Ring Bolt HT Hex Bolt – M20x50L (1 set = 12 Nos)
Front Die Cover Bolt HT Hex Bolt – M20x40L – (1Set =4 Nos)
Allen Bolt For Rear Wearing Ring – M24x110L – (1Set =8 Nos)
HAMMER Mill – HS-140
EN-8 Beater – 220L x 60W x 10thk (1 set = 96 Nos)
Sieve for Hammer Mill, 3mm dia Hole – 1552 x 830 mm x 3 mm thk
Spacer for Hammers-ID-28.5 x OD-39mm - 8mm thk - 48 Nos + 16mm thk - 48Nos + 34mm thk -48Nos + 80mm thk - 48Nos (1 Set = 192 Nos)
Carrying Rod for Hammer – 28 mm dia x 730 mm long (1 Set = 12 Nos)
Bearing for Hammer Mill – 23222CK + H2322 + SNA 522
Supply, Installation, testing & Commissioning of 150 HP Heavy duty VFD Panel with cables & accessories and synchronizing with plant automation
MISCELLANEOUS
Elevator Belt M24 x 3 ply. 3mm top & 1.5mm bottom rubber black – 300mm W
Elevator Belt M24 x 3 ply. 3mm top & 1.5mm bottom rubber black – 350mm W
Elevator Bucket – 10”x6”x5”x14G 3 holes of 8 mm dia
Elevator Bucket – 12”x8”x6”x14G 5 holes of 10 mm dia
M S Bucket Bolt Nut with emboss washer – M8 x 32L
M S Bucket Bolt Nut with emboss washer – M10 x 40L
Double Acting Magnetic Cylinder 63NB x 500 stroke with fittings & 2 reed switch
Double Acting Magnetic Cylinder 63NB x 400 stroke with fittings & 2 reed switch
Double Acting Magnetic Cylinder 200NB x 40 stroke with fittings & 2 reed switch
Double Acting Magnetic Cylinder 40NB x 50 stroke with fittings & 2 reed switch
Double Acting Magnetic Cylinder 50NB x 100 stroke with fittings & 2 reed switch
Double Acting Magnetic Cylinder 150NB x 200 stroke with fittings & 2 reed switch
Double Acting Magnetic Cylinder 125NB x 200 stroke with fittings & 2 reed switch
Double Acting Magnetic Cylinder 100NB x 160 stroke with fittings & 2 reed switch
Seal Kit for 40 NB D/A Magnetic Cylinder
Seal Kit for 50 NB D/A Magnetic Cylinder
Seal Kit for 63 NB D/A Magnetic Cylinder
Seal Kit for 100 NB D/A Magnetic Cylinder
Seal Kit for 125 NB D/A Magnetic Cylinder
Seal Kit for 150 NB D/A Magnetic Cylinder
Seal Kit for 200 NB D/A Magnetic Cylinder
Sensor Bracket
Proximity Sensor
Chain Coupling MS – 1” x 14T
Chain Coupling MS – 1” x 16T
Chain Coupling MS – 1” x 20T
Chain Coupling MS – 1” x 22T
Chain Coupling MS – 1” x 24T
Sprocket for chain conveyor -125P x 9T
5/2 way single Solenoid Valve – 1/2”
5/2 way single Solenoid Valve – 1/4”
Chain for Chain Conveyor Size 250mm Wide x 125mm Pitch
Chain for Chain Conveyor Size 285mm Wide x 125mm Pitch
Chain Conveyor Sprocket 9T x 125mm Pitch
Special Type Grease for Pellet Mill and Hammer Mill
List of Spares - PART - B
2 mm extra wide SR pellet Machine DIE.(S.S) G Crome (used for sinking fish feed) Make: RK
208 mm OD & 138 mm length (approx) SR. Pellet Machine extra wide press Roller Shell. TEETH-76, Make: RK(used for sinking fish feed & Cattle feed)
Worm Gear Box, Ratio-10:1, LD 24, Type A-337 (Only Gear Box) Make: PREMIUM
22211 Straight roller bearing. Make: SKF
32224 Tapper roller bearing. Make : NTN
32217 Tapper 32217 tapper roller bearing. Make : SKF
1213 K Ball Bearing. Make: NTN
Pummer Block(SN 513) Make : SKF
H-213 (Bearing Socket, Churi & Check-NUT) Make: SKF
UC 210 Ball Bearing
Ball Bearing 2315 K,
List of Spares - PART - C
Jr. extra wider Pellet Mill DIE (6mm hole size)
Jr. extra wider Pellet Mill DIE (3mm hole size)
Jr. extra wider Pellet Mill DIE (6mm hole size) Holding Ring
Jr. extra wider Pellet Mill Press Roller Shell ( OD 150 mm, ID 100 mm, Teeth 90 mm, no. of teeth 60)
Jr. extra wider Pellet Mill Press Roller Shell ( OD 155 mm, ID 100 mm, Teeth 90 mm, no. of teeth 60)
Bearing 32211 (NTN)
Bearing N0317 M (NTN)
Bearing 22217(NTN)
Bearing 22311 (NTN)
4” Angle Grinder (Bosch Make, 900 Watt)
List of Spares - PART - D
Pellet Mill Die (Jr.) 6mm
Bearing 32211
Bearing P212
Roller Pellet Mill (Jr.) 155 mm
Roller Chapa (Male/Female) Set
V-Belt B-105
V-Belt B-62
Esentic Shaft
Distance Ring for Roller
Die inside Ring
Die Bolt 2”/1/2”
Taitening Ring (Male/Female) Set
Grease Nut
Kakra Bolt Box
Lock Washer
Spectoms Engineering P Ltd
Sai Feed Equipment
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].