MAINTENANCE AND REPAIRS TO INTERNAL ELECTRIFICATION AND CONNECTED WORKS IN MAP QTRS AND CIVILIAN MD ACCN AT AFS BIDAR

Amount

S & F in replacement of Switch piano flush, single pole, one way, 5/6 Amp, complete all as specified and as directed.

S & F in replacement of ceiling rose surfaces bakelite 63.5 X 28mm three terminals complete all as specified and as directed.

S & F in replacement of switch socket combination 3 Pin, 2 in 1 6 Amp, flush type, complete all as specified and as directed.

S & F in replacement of switch socket combination, 3 Pin 16 Amps, 240 Volt, controlled by one switch complete all as specified and as directed.

S & F in replacement of switch bell push piano, flush, single pole, 5/6 Amp,complete all as specified and as directed.

S & F in replacement of switch modular type single pole one way 6 Amp with all accessories completeall as specified and as directed.

S & F in replacement of switch modular type single pole one way 16 Amp with all accessories complete all as specified and as directed.

S & F in replacement of socket outlet 3 Pin 6 Amp modular type all accessories complete all as specified and as directed.

S & F in replacement of socket outlet multipurpose 3 Pin 16A modular type with all accessories complete all as specified and as directed.

S & F in replacement of Bell push modular type 6A with all accessories complete all as specified and as directed.

S & F in replacement of lamp holder, angular type, PVC / Polycarbonate with back plate 5 amps 230 V suitable for general lighting system ccomplete all as specified and as directed.

S & F in replacement of 240V, 20 Amp single pole and earth enclosure with a two pin and earth plug and socket complete all as specified and as directed.

S & F in replacement of MCB DB, SPN 4 way with 200 Amps rated copper bus bar with mild steel sheet enclosure, double door suitable for fixing MCBs and connecting etc., complete all as specified and as directed.

S & F in replacement of MCB DB, SPN 8 way with 200 Amps rated copper bus bar with mild steel sheet enclosure, double door suitable for fixing MCBs and connecting etc. complete all as specified and as directed.

S & F in replacement of MCB DB, TPN 4 way with 200 Amps rated copper bus bar with mild steel sheet enclosure, double door suitable for fixing MCBs and connecting etc., complete all as specified and as directed.

S & F in replacement of MCB TPN 63 Amp 240 V 50 Hz AC Supply complete all as specified and as directed.

S & F in replacement of MCB TPN 32 Amp with proper size lugs complete all as specified and as directed.

S & F in replacement of MCB SP 6 to 32 Amp complete all as specified and as directed.

S & F in replacement of MCB SPN 32 Amp 240 V 50 Hz AC Supply complete all as specified and as directed.

S & F in replacement of MCB SPN 63 Amp 240 V 50 Hz AC Supply complete all as specified and as directed.

S & F in replacement of bell AC 230 Volt Ding Dong type, 240 Volt AC supply, complete all as specified and as directed.

S & F in replacement of new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium bldg security light luminaries with high power LED as light source of power 45 W, IP 66, system luminous efficacy >85 Lm/ W, life 50,000 hrs, surge protection 10 kV and zero maintenance including all light fittings etc. and connection from ceiling rose to light fitting by using three core 1.5 sq mm copper conductor cable complete all as specified and as directed.

S & F in replacement of MCCB 125 Amp 4 pole 16 KA in existing panel board connecting with proper size link set, incoming, out going cable electrically connected and making necessary modification in existing panel as required at site complete all as specified and as directed.

S & F in replacement of MCCB 100 Amp 4 pole 16 KA in existing panel board connecting with proper size link set, incoming, out going cable electrically connected and making necessary modification in existing panel as required at site complete all as specified and as directed.

S & F in replacement of MCCB 63 Amp 4 pole 16 KA in existing panel board connecting with proper size link set, incoming, out going cable electrically connected and making necessary modification in existing panel as required at site complete all as specified and as directed.

S & F in replacement of fan regulator, AC, 230V, single pole electronic, step type, complete all as specified and as directed.

S & F in replacement of Two module, Fan regulator, step type, AC, 230V, electronic, complete all as specified and as directed.

Taking down carefully copper/ aluminium point wiring (Light, fan, socket or power) complete all as specified and as directed.

Point wiring with 1100 V grade 1.5 Sqmm single core PVC insulated unsheathed FRLS cable, copper conductor multistranded passing through PVC casing & caping , fixed on wall/ roof/ floor with concealed MS box / Surface type PVC box as required at site with 3mm thick laminated top cover duly earthed with 1.5 sqmm multistranded PVC insulated copper conductor cable for one light point /bell point /fan point controlled by one switch complete all as specified and as directed.

All as per item No. 29 here-in-before but in same board with other switches for 5 Amp switch socket with earth wire 1.5 sq mm FRLS PVC insulated multistranded copper conductor cable complete all as specified and as directed.

All as per item No. 29 here-in-before but for 5 Amp switch socket on independent board complete all as specified and as directed.

All as per item No.29 here-in-before but size of cable 2.5 sqmm for 15 Amp switch socket with earth wire 2.5 sqmm PVC insulated multistranded copper conductor cable complete all as specified and as directed.

Sub main wiring with 2 runs of 4 sqmm, single core, PVC insulated, unsheathed, 1100 volts grade, multi stranded with FRLS copper conductor, drawn through PVC casing & caping of suitable size with with all fittings , one run of PVC insulated 4 sqmm copper conductor for earth continuity including taking down existing submain wiring complete all as specified and as directed.

Sub main wiring with 2 runs of 6 sqmm, single core, PVC insulated, unsheathed, 1100 volts grade, multi stranded with FRLS copper conductor, drawn through PVC casing & caping of suitable size with with all fittings , one run of PVC insulated 6 sqmm copper conductor for earth continuity and taking down existing submain wiring complete all as specified and as directed.

Sub main wiring with 2 runs of 10sqmm, single core, PVC insulated, unsheathed, 1100 volts grade, multi stranded with FRLS copper conductor, drawn through PVC casing & caping of suitable size with with all fittings , one run of PVC insulated 10 sqmm copper conductor for earth continuity and taking down existing submain wiring complete all as specified and as directed. Note for item Nos. 33, 34 and 35: 2 runs 4/6/10sqmm single core copper conductor, 1 run of 4/6/10sqmm copper conductor earth wire and one run of casing& caping will be measured as one unit

S & F in replacement of 20/22 W LED Surface mounted, batten fixture, 1200mm in length, with powder coated pressure dia cast aluminium housing and translucent diffuser. The fitting should have multichip on board LED metal clad PCB and dedicated heat shrink. The minimum lumens output of the system should not be less than 1450 lumens. The fitting should have surge protection of minimum 2 Kv input current <200mA, THD<10 % and CCT between 5000 k to 6500 K complete all as specified and as directed.

S & F in replacement of 10/12 W LED Surface mounted, batten fixture 600 mm in length, with powder coated pressure dia cast aluminium housing and translucent diffuser. The fitting should have multichip on board LED metal clad PCB and dedicated heat shrink . The minimum lumens output of the system should not be less than 1450 lumens. The fitting should have surge protection of minimum 2 Kv input current <200mA, THD<10 % and CCT between 5000 k to 6500 K complete all as specified and as directed.

S & F in replacement of new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium bldg security light luminaries with high power LED as light source of power 25 W, IP 66, system luminous efficacy >85 Lm/ W, life 50,000 hrs, surge protection 10 kV and zero maintenance including all light fittings etc. and connection from ceiling rose to light fitting by using three core 1.5 sq mm copper conductor cable complete all as specified and as directed.

Disconnection & taking down the unserviceable GI bracket of size 40mm dia from the pole / building and M&L for street light bracket made out of 40mm dia GI tubing medium grade upto 1.5 mtr long including bending, welding, drilling holes as required and fixing with flat iron clamps 50 x 6mm thick (2 Nos) with suitable nut, bolts and washers to steel tubular / concrete poles complete, including preparation of steel and iron surface and applying two coats of aluminium paint, first quality, over a coat of primer, etc complete all as specified and directed

Satish Patpally

RAMESH CONSTRUCTION COMPANY

om sai enterprises

SIMRAN ENTERPRISES