Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.7 LAccepted-AOC | ₹3.7 L | L1 | Accepted-AOC L1 |
| 2 | L2₹3.8 L+₹7,438.37 (2.02%)Rejected-Finance | ₹3.8 L+₹7,438.37 (2.02%) | L2 | Rejected-Finance L2 |
| 3 | L3₹3.8 L+₹9,049.64 (2.46%)Rejected-Finance | ₹3.8 L+₹9,049.64 (2.46%) | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | Ubaid L3 | BASICINFRA PROJECT CORPORATION LLP L1 | ALI.P L2 |
|---|---|---|---|---|---|---|
| 1.00Dressing Room | ||||||
| 1.01 | Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock | 0.65 | cum | 484 ₹313.63 | 480 ₹311.04 Lowest | 483 ₹312.98 |
| 1.02 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil | 15.6 | cum | 241 ₹3,759.6 | 240 ₹3,744 Lowest | 240 ₹3,744 Lowest |
| 1.03 | Excavating holes more than 0.10 cum & upto 0.50 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil; as directed within a lead of 50 m and lifi up to 1.5 m.Hard rock (blasting prohibited) | 12 | Holes | 447 ₹5,364 | 440 ₹5,280 Lowest | 446 ₹5,352 |
| 1.04 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1: I /z:3 (1 Cement: I /z coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.65 | cum | 9,110 ₹5,903.28 | 9,000 ₹5,832 Lowest | 9,110 ₹5,903.28 |
| 1.05 | Steel work in built up G I tubular ( round. square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 858.81 | kg | 216 ₹1,85,502.53 | 210 ₹1,80,349.68 Lowest | 215 ₹1,84,643.72 |
| 1.06 | Steel work for purlin/single section with G 1 pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 546.48 | kg | 175 ₹95,634 | 170 ₹92,901.6 Lowest | 174 ₹95,087.52 |
| 1.07 | Providing and fixing precoated galvanised iron proti ie sheets (size, shape and pitch of comigation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 77.34 | sqm | 787 ₹60,866.58 | 780 ₹60,325.2 Lowest | 786 ₹60,789.24 |
| 1.08 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete
:Ridges plain (500-600 mm) | 12 | metre | 528 ₹6,336 | 520 ₹6,240 Lowest | 527 ₹6,324 |
| 1.09 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 88.38 | sqm | 154 ₹13,611.14 | 150 ₹13,257.6 Lowest | 153 ₹13,522.75 |
Tender Value
₹3.8 L
EMD Value
₹9,414
Closing Date
17 Mar 2026, 4:00 pmClosed
Divisional Forest Officer
Divisional Forest Officer South Wayanad Forest Division Pinangode Road, Kalpetta
Retender- providing waiting room and dress change room at Meenmutty eco tourism point in Kalpetta Range South Wayanad Division
2026_FD_839371_2
KFDDO/7927/2026-DFOWYNDS/B3
Open Tender
Civil Works - Buildings
Item Rate
90 days
Padinjharathara
Please refer Tender documents.
6 documents required · 6 mandatory
₹753
Yes
₹9,414
Yes
5 Sept 2026
10 Mar 2026
19 Mar 2026
10 Mar 2026
17 Mar 2026
10 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Dressing Room | |||||
| 1.01 | Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock | 0.65 | cum | 483.34 | ₹313.2 |
| 1.02 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil | 15.6 | cum | 240.45 | ₹3,751.02 |
| 1.03 | Excavating holes more than 0.10 cum & upto 0.50 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil; as directed within a lead of 50 m and lifi up to 1.5 m.Hard rock (blasting prohibited) | 12 | Holes | 446.42 | ₹5,357.04 |
| 1.04 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1: I /z:3 (1 Cement: I /z coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.65 | cum | 9,110.1 | ₹5,903.34 |
| 1.05 | Steel work in built up G I tubular ( round. square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 858.81 | kg | 215.54 | ₹1,85,107.48 |
| 1.06 | Steel work for purlin/single section with G 1 pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 546.48 | kg | 174.58 | ₹95,404.48 |
| 1.07 | Providing and fixing precoated galvanised iron proti ie sheets (size, shape and pitch of comigation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 77.34 | sqm | 786 | ₹60,789.24 |
| 1.08 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete
:Ridges plain (500-600 mm) | 12 | metre | 527.38 | ₹6,328.56 |
| 1.09 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 88.38 | sqm | 153.87 | ₹13,599.65 |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1429086.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.13 MB
NIT7958.pdf
Tender Documents • 0.71 MB
BOQ_1429086.xls
BOQ • 0.35 MB
pre.pdf
Tender Documents • 0.38 MB
epayment.pdf
Tender Documents • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .