COMPREHENSIVE MAINTENANCE OF BUILDING AND ELECTRICAL REPAIR WORK IN CERTAIN BUILDING OF MD ACCN AT YOGENDRA YADAV VIHAR IN NORTH ZONE UNDER GE NORTH BINNAGURI

Amount

SCHEDULE `A' ( CIVIL WORK) Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n exc 4 sqm each etc including removing material from work site complete all as specified and directed.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each and including removing material from work site complete all as specified and directed.

Taking down and refixing of shutters of any description exc 1 sq.m and n exc 2 sq.m each after necessary repairs in the same opening complete all as specified and directed.

Taking down chowkats with shutter (without taking off shutter from the frame) n.exc 1.5 Sqm each etc including removing material from work site complete all as specified and directed.

Supply and fixing of 35mm thick 2nd class hard wood factory made, plain, framed, panelled shutter (two panel) with lock rails and panel of 9mm BWP comercial ply or 12 mm thick veneered particle board with comercial veneering on both faces. The size of rail and style as per IS-1003 Part-I klin seasoned and chamicaly pressure treated complete all as specified and as directed.

Supply and fixing of factory made 35mm thick 2nd class hard wood gauged and skeleton shutter open rebated and prepared to received gauge etc (without sash bars) for fly proof door shutter, edges of framing plain, chamfered or rounded, fitted with cut of any mitred beads for securing gauge etc, size of members of shutter as specified in SSR Part-I section 8 clause No.8.23(a) and fitted to chowkats complete all as specified and as directed.

Supply and Fixing solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supply & fixing in opening as per specification & drawing and as directed.

Supply and Fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side as gap insert for top rails bottom rail, panelling of plain colour PVC sheet to be fitting in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drg and as directed.

Refixing of shutter of any description exc 1 Sqm and n.exc 2 Sqm each in same opening including resecuring or easing & adjusting without taking down complete all as specified

Supply and fix 100mm size stainless steel Butt Hinges, medium weight with mild steel hinge pin, bright polished and fixed, complete all as specified.

Supply and fix in repairs 100mm size Butt Hinges, cast brass, with mild steel hinge pin, bright polished and fixed,complete all as specified.

Supply and fixing 150 mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified.

Supply and fixing in repairs 150 mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified.

Supply and fixing 200 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified.

Supply and fixing 250 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified.

Supply and fixing in repairs 250 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified.

Supply and fixing in repair factory made steel window with side hung shutters including projecting type hinges with steel handles, and steel peg stay, fixing lugs complete with glazing bar devetailed or welded including one shop coat of red oxide primer compete all as specified and as directed.

Supply and fixing in repair factory made steel window with side hung shutters including projecting type hinges with steel handles, and steel peg stay, fixing lugs complete without glazing bar devetailed or welded including one shop coat of red oxide primer compete all as specified and as directed.

Supply and fixing in repair helical door spring, 300 mm long arrow type of approved quality including roller and roller plate stove enamelled black finished complete all as directed

Supply and fixed stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixed mild steel flat iron as in support for verandha jali , mesh including welding , drilling holes and fixed to frames with nuts sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc confirming to to Fe-290-Gde E-165 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, removing of unserviceable material from work site complete all as specified and as directed.

Supply and fixed rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening .grade Fe-410-W ( Gde-E-250) quality -B complete all as specified.

Supply and fixed stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc wooden /fillets (15mm x 15mm ) for door steel flats for windows duly painted with synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over one coat of red oxide Zinc chrome primer complete all as specified.

Material and labour for preparation of untreated new wooden surface of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint, (1 st quality) with a coat of pink primer all as specified and directed.

Hacking out old broken glass ( any thickness , size , quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads upto 1.5 sqm complete all as specified.

Supply and fixing 3 mm thick (nominal) Sheet glass, ordinary quality , in squares, not exceeding 0.50 sqm each each pane fixed with oil putty complete all as specified.

Supply and fixing 3 mm thick (nominal) figured glass, pin head type , in squares, not exceeding 0.50 sqm each each pane fixed with oil putty complete all as specified.

Material and labour for plain cement concrete 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in fixing of hold fast ,bed blocks parapet, cills, coping, filling concrete in PS door frames, filling gaps in between glazed and flyproof steel window, cills and similar works including necessary form work as required complete all as specified and as directed.

Supply and fiixng in repairs PVC waste pipe of 32 mm dia 90 cm long for wash hand basin fixed complete all as directed.

Supply and fiixng in repairs PVC waste pipe of 40 mm dia 90 cm long for kitchen sink fixed complete all as directed.

Supply and fixed in repairs 18/19 mm thick prelaminated particle board,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in kitchen cabinet shutter/ cupboard wall panelling including 6 mm thick teak wood beading complete all as specified.

Supply and fixed in repairs 25 mm thick prelaminated particle board,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard shutter including 6 mm thick teak wood beading complete all as specified.

Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc.including removing of rubbished material from work site complete all as specified.

Material and labour for rendering 15 mm thick (10+5) in two layers on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4 using water liquid water proofing compound @ 200 ml per bag of cement or as per manufacturer's instructionscomplete all as specified top surfaces finished even and smooth without using extra cement complete all as specified. (WPC shall be apply in second layer and measured and paid separately)

Material and labour for rendering 5mm thick on concrete surfaces in ceiling , in cement and sand mortar 1:3 complete all as specified

Material and Labour for rendering 15 mm thick on fair faces of brick or concrete surfaces finishing surfaces even and smooth without using extra cement in Cement mortar 1:6 all as specified and directed.

Supply only Integral liquid water proofing compound conforming to IS-2645-2003 complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), in floors, aprons etc .laid dry or laid dry and pointed including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.complete all as specified.

Material and labour for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screeding in CM 1:4 complete all as specified (Note : screed bed shall not be measured and paid separately).

Material and labour for glazed ceramic coloured / digital printed of size (300 x 200 mm / 300 x 450 mm x 7 mm thick ) as in vertical surfaces such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:3) complete all as specified and as directed. (Note : screed bed shall not be measured and paid separately).

Material and labour fo preparation of new plastered or unplastered surafces of walls and applying two coats of white wash over a coat of colour wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour fo preparation of new plastered or unplastered surafces of ceilings and applying three coats of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour fo preparation of new plastered or unplastered surafces of walls and applying three coats of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Taking up or down steel tubing and connections, including cleaning for re-fixing and removal of unserviceable pipe from work site,15 mm bore dia all as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing and removal of unserviceable pipe from work site, 20 mm bore dia all as directed.

Supplying , laying, jointing and testing 15 mm nominal bore Steel water tubes, 'medium grade' ,galvanised , with all fittings ; fixed to walls and ceilings or laid in floors complete all as specified.

Supplying , laying, jointing and testing 20 mm nominal bore Steel water tubes, 'medium grade' ,galvanised , with all fittings ; fixed to walls and ceilings or laid in floors complete all as specified.

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.)15 mm nominal bore dia, including new fittings complete all as specified ( Note:- Refixing means including cleaning down existing pipes and fittings. )

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.) 20 mm nominal bore dia, including new fittings complete all as specified ( Note:- Refixing means including cleaning down existing pipes and fittings. )

Cutting chases in brick work, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades,shelves, lintels,etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc.,and making good, cutting not exc 10 cm girth complete all as specified.

Supply and fixed rotational moulded poly-ethylene multilayer water storage tanks ( cylinderical vertical with closed top ) 500 litres capacity ,hoisted and fixed in position complete all as specified including dismantling PVC water tanks, including removing ball valve and removing unserviceable tank from work site complete all as specified

Supply and fixed ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete , screwed for 20 mm bore dia. pipe or brass ferrule complete all as specified.

Supply and fixed in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete , screwed for 20 mm bore dia. pipe or brass ferrule complete all as specified.

Supply and fixed in repair PTMT ( Polytetra Methyllene Terephthalate ) Bib taps suitable for 15 mm bore pipe standard of PTMT any colour high pressure screwed for iron pipe and fixed ( Minimum weight 15 mm-120 gms complete all as specified .

Supply and fixed in repair, CP stop cock ( concealed type) long fancy type screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified

Supply and fixed in repair PTMT ( Polytetra Methyllene Terephthalate ) Stop cock suitable for 15 mm bore pipe standard of PTMT any colour high pressure screwed for iron pipe and fixed ( Minimum weight 15 mm-90 gms complete all as specified .

Supply and fixed in repair PTMT ( Polytetra Methyllene Terephthalate ) Stop valve M/F thread suitable for 15 mm bore pipe standard of PTMT any colour high pressure screwed for iron pipe and fixed ( Minimum weight 15 mm-90 gms complete all as specified .

Supply and fixed in repair PTMT ( Polytetra Methyllene Terephthalate ) Swivel shower suitable for 15 mm bore pipe standard of PTMT any colour screwed, for iron pipe and fixed ( Minimum weight 40 gms complete all as specified .

Supply and fixed in repair, 15 mm bore dia of pipe , chromium plated ,pillar taps, fancy type, cast copper alloy , with capstan heads, screwed down for 15 mm bore pipe,high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified.

Supply and fixed in repair CP angular stop cock fancy type, screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified .

Supply and fixed in repairs vitreous china wash basin (WHB) , white , flat back , size 550 mm x 400 mm (1st quality) including brackets, waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting for and pinning in ends of brackets or erecting stand but but incl providing brackets, waste pipe & CP waste coupling complete all as specified and as directed.

Supply and fixed in repairs vitreous China white Squatting pan ,'Orissa' pattern size 580 mm x 440 mm with integral footrests water closet) with 'P' or 'S' trap front or back inlet complete including lime concrete for bedding, connection to drain pipe and to flushing pipe , anti syphonage pipe etc complete all as specified.

Supply and fixed in repairs low level flushing cistern (dual-flush), 9-10 litres capacity ISI marked embossed moulded from virgin poly propylene including flush pipe complete all as specified and directed.

Supply and fixed in repairs of grating doom 125 mm dia of PTMT (Minimum weight 40gms) with waste holecomplete all as specified.

Supply and fixed in repairs of grating doom 125 mm dia of PTMT with hole (Minimum weight 40gms) with waste holecomplete all as specified.

Supply and fixed in repairs of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with necessary clamps complete all as specified including taking down old unserviceable pipe including fittings.

Supply and fixed in repairs of 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with necessary clamps complete all as specified including taking down old unserviceable pipe including fittings.

Supply and fix PVC (SWR) bends 110 mm bore of any radius without acess door complete all as specified

Supply and fix PVC (SWR) bends 75 mm bore of any radius without acess door complete all as specified

Supply and fixed in repairs, chromium plated Bib taps with cup , long body, cast copper alloy with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified.

Supply and fixing in repairs 40 mm bore waste coupling of PTMT (fill threaded) minimum weight 60 grms etc complete all as specified and as directed.

Supply and fixing in repairs 32 mm bore waste coupling of PTMT (fill threaded) minimum weight 60 grms etc complete all as specified and as directed.

Supply and fixed in repairs PTMT connections 15 mm size with PVC nuts of length 450 mm complete all as specified.

Supply and fixing in repairs CP Brass Tubular towel rail, 20 mm dia. D type, 45 cm long between flanges with bracket complete all as specified.

Supply and fixed in repairs white vitreous china wash down water closet pan (pedestal pattern) EWC, of size 520 x 360 x 390 mm with ‘P’ or `S' trap, including fixing bolts, Plastic water closet seat and cover, closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device, including PVC low level flushing cistern including making all necessary connections complete all as specified and as directed.

Suppy and fixed in repairs, powder coated anodised aluminium ventilators with and including 3 mm thick sheet glass as in lower portion fixed with necessary rubber beading and gasket and providing and fixing stainless steel wire cloth 0.36mm nominal dia of wire and 1.40 mm avaerage width of apperture and fixed with stainless steel wire staples in upper portion of ventilator complete including MS guard bar of size 123 sqmm bars welded to MS flat iron frame made of 30 x 5 mm thick flat irom fixed in position complete all as directed. Note :- Aluminium sections shall be powder coating (minimum thcikness of powder coating 50 micron)

Taking down old / rusted varandah net / jali including frame of any description etc complete all as specified and as directed.

Supply and fixed in repairs of steel window handles, left/right copper oxide coating with nut bolt & washers complete all as directed.

Supply and fixed in repairs of peg stay 300mm long with 3/4 holes stove enamelled black suitable for existing steel windows including welding of necessary cleat to existing window nut/bolts complete all as directed.

Supply and fix in repairs brass spindle for concealed stop cock as approved complete all as specified.

Supply & Fixed in repair good quality PVC syphon complete set with float valve for low level flushing cistern 0f 10ltrs capacity complete all as directed.

Resucuring or easing & adjusting of wooden door shutter for proper closing / opening, tighting of hinges or changing the position of hinges if required, adjustment of tower bolts and sliding bolts complete all as directed.

Supply and fixing in repairs of PVC tank cover for 500 / 1000 Ltr Rotational moulded polyethylene water storage tanks, with proper lockiing arrangement complete all as specified and as directed.

Supply and fixing in repairs of PVC tank cover upto 250 Ltr capacity Rotational moulded polyethylene water storage tanks, with proper lockiing arrangement complete all as specified and as directed.

Supply and fixed in repairs stainless steel sink with draining board , made out of 1mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 915 mm x 460 mm with bowl size 410 mm x 355 mm x 165 mm completecomplete all as specified.

Supply and fixed in repairs decorative type curtain rod 20 mm dia chromium plated with fixing brackets ornamental type, stops, rollers etc all approved by Engineer- in-Charge complete all as specified and as directed.

Supply and fixed in repairs of Chromium plated grating dome (round) 125 mm dia of approved design fixed over floor / nahani trap ( with hole or without holes) complete all as specified.

Cutting out old unserviseable steel hinges from old steel windows in position and providing of new steel hinges on side dully welded ( spot) to face of shutter made with electro galvanised, pin projecting type not less than 65mm and not more than 75 mm wide and other side welded to steel frame of suitable thickness for smooth functioning by greasing etc including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

Cutting out old unserviseable steel hinges from old steel ventilator top hung type in position and providing of new steel hinges on side dully welded ( spot) to face of shutter made with electro galvanised, pin projecting type not less than 65mm and not more than 75 mm wide and other side welded to steel frame of suitable thickness for smooth functioning by greasing etc including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

Supply and fixing in repairs 100 mm size hasp and staple, safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screwscomplete all as specified.

Material and labour for 2nd class hard wood for plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, in pieces for replacing one leg or certain portion of dacayed portion without taking down chowkhat or frame by cutting existing length/portion complete including making good disturbed opening by rich mortar in cement mortar (1:4) complete all as specified and as directed.

Supply and fixed in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75 mm dia. outlet complete all as specified.

SCHEDULE `A' ( ELECTRIFICATION WORK) Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified.

Material & Labour for consealed type point wiring with 1.50 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable of working voltage 1100 volts grade conforming to IS-694 Pt I & II of 2000 drawn through and including PVC conduit of adequate size having a wall thickness not less than 1.5 mm with all accessories (including cutting chases & making good the disturbed surface to its original specification), including provision of 1.5 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable as earth continuity conductor, connected to main switch / DBs or common earth dolly for one light / fan point / exhaust / call bell point controlled by one 5 Amps one way switch complete all as specified and as directed . Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

All as per item No.88 here-in-before but for one socket out let 5/6 amps point on the independent board

All as per item No.88 above but One socket out let 5/6 amps point on the same board complete all as specified.

All as per item No.88 above but one light point controlled by one, two way switch 5 Amps complete all as specified.

Material and labour wiring for 5/6 pin 6/16 Amp switch socket combination on independent boards controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FR earth wire and connecting to earth dolly and brass screws, washers etc. including cutting chases pinning in for concealed conduit wiring and making good of disturbed surface n exc 15 cm girth complete all as specified.

Supply and fixed switch piano flush type, single pole , 6 Amps, one way complete all as specified.

Supply and fixed switch piano flush type,single pole, two way, 6 amps, 230 volts complete all as specified.

Supply and fixed bell push , flush type, single pole , 6 Amps, one way complete all as specified.

Supply and fixed socket combination, flush type , multipurpose 2/3 pin , 5/6 amps,23 volts complete all as specified and as directed.

Supply and fixed switch socket combination 2 and 3 Pin, 5/6 amps, multipurpose of any type flush type controlled by one switch complete all as specified.

Supply and fixed switch socket combination 2 in 1, 6 pin 5/6 amps and 15/16 amps multipurpose, of any type complete all as specified.

Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

Supply & fixed stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified .

Supply & fixed lamp holder, PVC/polycarbonate type with back plate straight or anfular suitable for batten fittings complete all as specified.

Supply and fixed in repair switch piano flush type, single pole , 6 Amps, one way complete all as specified.

Supply and fixed in repairs switch piano flush type,single pole, two way, 6 amps, 230 volts complete all as specified.

Supply and fixed in repairs socket combination flush type multipurpose 2/2 pin 5 Amps 2 in 1, 230 volts complete all as specified and as directed.

Supply and fixed in repairs switch socket combination flush type multipurpose 2/3 pin 2 Amps 2 in 1, 230 volts controlled by one switch complete all as specified.

Supply and fixed in repairs switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 Amps flush , 230 volts controlled by one switch complete all as specified.

Supply & fixed in repairs ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

Supply & fixed in repairs stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified .

Supply & fixed lamp holder, PVC/polycarbonate type with back plate straight or anfular suitable for batten fittings complete all as specified.

Supply & fixed in repairs LED Lamp 1 x 09 Watts, 230V Base-22 complete all as directed.

Supply & fixed in repairs LED Lamp 1 x 20 Watts, 230V Base-22 complete all as directed.

Supply & fixed in reapirs Buzzer, Ding dong, AC 230 Volts, single pole 230 volts all as specified and directed.

Supply & fix sheet metal enclosure for 8 way Distribution Boards (DB’s), double door , single pole and neutral with 200 amps rated bus bar 240 volts , including bus bar neutral link, earth bar and din rail, IP-43, IK-09 protection including gasket and door earthing suitable for fixing MCBs/isolators with magnetic lock system fixed on wall surface and making good the disturbed surfaces of wall and connecting up including taking down old unserviceable one including MCCB / MCB complete all as specified and as directed.

Supply & fix sheet metal enclosure for 4 way Distribution Boards (DB’s), double door , triple pole and neutral , with 200 amps rated bus bar 415 volts , including bus bar neutral link, earth bar and din rail, IP-43, IK-09 protection including gasket and door earthing suitable for fixing MCBs/isolators with magnetic lock system fixed on wall surface and making good the disturbed surfaces of wall and connecting up including taking down old unserviceable one including MCCB / MCB complete all as specified and as directed.

Supply and fixed in repairs MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed in repairs MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed in repairs MCB TPN 40 to 63 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Materials and labour for Sub main wiring with 2 runs of 6.00 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant cable (FRLS) of working voltage 1100 volts grade with stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FRLS) with stranded copper conductor as continuous earth wire connected to main switches DBs or in common earth dolly, drawn through and including PVC rigid non- metallic PVC conduit / casing and capping ISI marked , medium garde of adequate size with all conduit / casing and capping accessories ISI marked as required complete all as specified and as directed including taking down old unserviceable / burnt / damaged one. [NOTE : Two run of sub main wiring cable along with one run of earth wire and one run of PVC Conduit / casing and capping shall be measured as one length]

Materials and labour for Sub main wiring with 2 runs of 4.00 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant cable (FRLS) of working voltage 1100 volts grade with stranded copper conductor including one run of 4.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FRLS) with stranded copper conductor as continuous earth wire connected to main switches DBs or in common earth dolly, drawn through and including PVC rigid non- metallic PVC conduit / casing and capping ISI marked , medium garde of adequate size with all conduit / casing and capping accessories ISI marked as required complete all as specified and as directed including taking down old unserviceable / burnt / damaged one. [NOTE : Two run of sub main wiring cable along with one run of earth wire and one run of PVC Conduit / casing and capping shall be measured as one length]

Supply and fixed in repairs for Single pole and neautral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps, 240 Volts, including necessry connection complete all as specified including taking down old one

Supply and fixing in repairs of LED light fittings 1 x 18/20 watts 230 Volt white powder coated slim box type batten made of formed CRCA with snap on installer LED lighting fixture with and including 1x18/20 watt T8 single side connection retrofit LED tube with G13 lamp holders, connector block, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable up to cealing rose complete all as specified and directed.

Supply and fix in repairs Ultra bright LED Tubelight 18 watts (single side connection) with very high efficacy suited for installation in existing tubelight fitting G13 lamp holders to give glare free light with necessary wiring and removal old existing unsv tube from fitting including taking up/ down old unserviceable Tube, disconnecting Choke, Starter etc from the Light Fitting complete all as specified and as directed by Engineer-in-Charge.

Supply and fixed in repairs building security light fitting with 25 watts LED made up of pressure die cast aluminium housing with PC cover having top opening including separate driver comportment with IP 66 protection & impart resistance of IKO7 with operating voltage range of 140V to 270 V complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable up to cealing rose including GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete incl removal of old unsv fitting all as directed by Engineer-in-Charge.complete all as specified.

Supply and fixing in repairs bulk head fitting suitable for 1X 10Watt LED surface mounted energy saving, decorative oval type , IP 66 protection and necessary electric connection with PVC insulated twin twisted flexible copper wire with and including one No 10 Watt LED lamp and all accessories, complete all as specified and as directed.

Supply and fix electronic Driver suitable for 15/25 watts LED security light fitting including removal old existing unsv one complete all as specified and directed.

Supply and fixing in repairs LED tube light fittings 1 x 9/10 watts energy efficient, 230 V incl 1x9/10 watt LED tube, surface / wall mounted LED batten with aluminium housing and integrated driver including holders, connector block etc. complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable all as specified and directed.

Supply and fixing in repairs hylam sheet 3 mm thick white in colour of size 130 mm x 180 mm complete all as specified and directed.

Supply and fixing in repairs hylam sheet 3 mm thick white in colour of size 120 mm x 170 mm complete all as specified and directed.

Supply and fixing in repairs hylam sheet 3 mm thick white in colour of size 230 mm x 280 mm complete all as specified and directed.

Supply and fixing in repairs hylam sheet 3 mm thick white in colour round type of size 80 mm dia i complete all as specified and directed.

ANIL ENGINEERING CO

samrat saw mill and joinery workshop