Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | As L1₹10.2 LAccepted-AOC 210 A RASHBEHARI AVENUE KOLKATA 700029 | KOLKATA | KOLKATA | WEST BENGAL | 700029 | As L1 | Accepted-AOC L1 | |
| 2 | Rejected-Technical 01 CHANGSARI KAMRUP ASSAM 781101 | KAMRUP | ASSAM | 781101 | - | Rejected-Technical Insufficient valid documents | |
| 3 | Rejected-Technical KALINAGAR JAGADISHPUR ULUBERIA HOWRAH PIN 711316 | ULUBERIA | HOWRAH | WEST BENGAL | 711316 | - | Rejected-Technical Insufficient valid documents | |
| 4 | As L2Rejected-Finance 24A RABINDRA SARANI KOLKATA 700 073 | KOLKATA | KOLKATA | WEST BENGAL | 700073 | As L2 | Rejected-Finance As L2 |
Tender Value
₹10.5 L
EMD Value
₹20,914
Closing Date
25 Apr 2018, 9:00 amClosed
Executive Engineer PWD BDN ELEC DIVN
Room no 1081st fl purta bhawan salt lake kolkata
Electrical installation works for illumination of Institute Block Court Yard and Supply and laying of new underground cables for staff quarter at The WB National University of Juridical Science Sector III Salt Lake Kolkata 700 098
2018_WBPWD_169169_1
WBPWD/EE/BED/93/e-IT of 2017_18/2nd call
Open Tender
ELECTRICAL WORKS M/R
Item Rate
20 days
WB National University
Please refer Tender documents.
4 documents required · 4 mandatory
₹20,914
Yes
11 Dec 2020
9 Apr 2018
27 Apr 2018
13 Apr 2018
25 Apr 2018
13 Apr 2018
Amount
Supplying and fixing double door 63A, 4 Way Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. Outgoing- 4 nos 16 A TP MCB. (Make-Legrand/Schneider/Crabtree/Seimens/ABB/L & T/Havells)
Fabrication, Supply & Fixing of Stainless Steel 3 Phase, 63Amp Capacity 6 way Bus Bar Chamber (Make- Havells, Cat No-IHBC006306) (Legrand/Schneider/Crabtree/Seimens/ABB/L & T/Havells) with necessary Copper Bars, nut boalts etc for distribution of power towards each light sets.
Supply & Fixing of 3 Phase 9-15A DOL Starters with necessary arrangements as required for ON & Off purpose of the light sets-(Make: L&T/ABB/Siemens)
S & Laying of following XLPE Aluminium Armoured cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish. incl Gland & socket as per G.S 3.5 core 35 sqmm (Feeder pillar to VTPN BDB) (Make- Havells/Glowstar/Crystal/Finolex/KEI)
Supplying and fixing compression type gland complete with brass gland brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC armoured cables as below. a) 3.5 core 35 sq mm
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing sold less socket (Dowels make), tapes, anticorrosive paste & jointing materials: a) 3.5 core 35sq mm
Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required by 3 x 84/0.3 (6 sq mm) + 2 x 56/0.3 (4 sq mm) ECC cu wire (for VTPN DBs to DOL Starters, Dol Starters to 3 Phase BBCs & BBCs to Lights Sets) as per G.S.
Supply & Fixing of copper socket including Finishing the PVC insulated stranded FR copper wire by crimping method as per GS as follows:- a) 6 sq mm
Supply & Fixing of copper socket including Finishing the PVC insulated stranded FR copper wire by crimping method as per GS as follows:- a) 4 sq mm
Supply & Fixing of copper socket including Finishing the PVC insulated stranded FR copper wire by crimping method as per GS as follows:- a) 2.5 sq mm
Supply & Fixing of 400 Watt Non-integral flood light luminaire (Metal Halide) with pressure die cast aluminium housing and option wide (WB) beam light distribution fittings, lamps and CG box on iron channel with clamping arrangement.(Make-Phillips Cat No-SNF114-1XHPIT 400W-WB/Wipro/CG/Bajaj)
Supply & fabrication of Iron structural works by ISMC 200 Channel, The one bean/Channel should be holding Capacity of 6 nos lights with C.G box the total sets should be fixed on wall by fabrication of structure at 12 Mtr height from ground level.
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level by ISI Medium Pipe.
Supplying and fixing earth busbar of galvanised(Hot Dip)MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.
Scaffolding arrangement for working at the high areas.
Supply and Laying of new Aluminium armoured 3.5 core 50 sq mm cable through existing RCC/Hume/GI pipe/open masonary trench- 2 Run Cable for staff quarter (Make: Havells/Glowstar/Crystal/Finolex/KEI)
Mico Tunneling including supply of GI pipe as per appropriate specification in single length for each individual tunnel by 65 mm GI pipe (for staff quarter).
L.W.C. must be quoted manually @1% on the total quoted value else the total quoted rate shall be treated incl. LWC as per rule. N.B. Rate should be quoted inclusive of GST.
STANDARD BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .