etender for Setting up of Tinkering Labs in 27 Schools in various districts all over Kerala

Amount

etender for Setting up of Tinkering Labs in 27 Schools at various districts all over Kerala For more details refer tender documents

15.7.4.Demolishing brick work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge. In cement mortar

15.56Dismantling old plaster or skirting raking out joints and cleaning the surface or plaster including disposal of rubbish to the dumping ground within 50 metres lead

13.7.2 12 mm cement plaster finished with a floating coat of neat cement of mix:: 1:4 ( 1 cement : 4 fine sand)

13.80 Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer

13.60.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

11.37. Providing and laying Ceramic glazed floor tiles of size 300x300 mm m (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

11.37A. Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-inCharge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete

13.61.1. Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work

Fabrication supply and installation of wall side working table of size 3.00 L x 0.60 W x0.75 H m Table top : prelaminated particle board/MDF. Leg : MS powder coated leg and MS powder coated edge beams

Fabrication supply and installation of wall side working table of size 1.20 L x 0.60 W x 0.75 H m Table top : prelaminated particle board/MDF. Leg : MS powder coated leg and MS powder coated edge beams.

Fabrication supply and installation of wall side working table of size 1.20 L x 1.20 W x0.75 H m Table top : prelaminated particle board / MDF. Leg : MS powder coated leg and MS powder coated edge beams.

Workstation Chairs: Supplying and placing Mid back height adjustable chair r with fixed armrest. Seat upholstered with PU Foam & back with mesh as per design intent.Including all cost and conveyance of materials, labour etc

Wooden stool chair : Supply and placing round wooden stool chair of 50 cm dia seating with metal powder coated/ wooden leg.

Fabrication supply and installation metal rack of size 0.90m L x 0.45m W x 1.80m H with slotted angle frames and metal sheets

Item code 1.7.2-Wiring for circuit/ submain wiring alongwith earth wire e with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.24.1 Supplying and fixing following modular switch/ socket on the existing modular plate on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch

1.24.4 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outle

1.28.2. Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module

90.10.1.3 Supply & Fixing the following types/sizes of boxes s suitable for modular accessories in surface/ recess including making good thedamages, colour washing etc as required(RoHS compliant ) 3 module moulded plastic box on surfac

Item code : 1.53.1 1 run cable

Item code: 1.21.1 20mm Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required

Supply of Wireless Ceiling Mount Access Point, Support PoE 802. 3af/at and Direct Current, Easily Mount to Wall or Ceiling including power adapter

Supply and installation of Cat 6 RJ 45 Connectors with boot.

Design, printing and installation of graphics onwall with Digitally reproduced art work Print on 3M IJ 16-20 with foam board and installed over a existing surface of partition /panelling as per details

Design, printing and installation of graphics onwall with Digitally reproduced art work printed on self adhesive vinyl film and installed over existing surface of partition/panelling as per the requirement

QBIX TRADE LINES (BID ID -1953428)