Loading…
Loading…
Tender Value
₹41.3 L
EMD Value
₹41,300
Closing Date
25 Sept 2026, 6:00 pmClosed
Secretary, The Agricultural Produce Market Committee, Kathlal
CONSTRUCTION OF SALES CUM EXHIBITION CENTER AT APMC KATHLAL TALUKA-KATHLAL, DIST: KHEDA GUJARAT (Third Attempt)
342562
2026-27
Open
Civil Works - Buildings
Works
Kheda
2 documents required · 2 mandatory
₹1,770
“Secretary, The Agricultural Produce Market Committee, Kathlal
₹41,300
25 Sept 2026
7 Sept 2026
26 Sept 2026
7 Sept 2026
14 Sept 2026
7 Sept 2026
NAME OF WORK :- Construction of Sales Cum Exhibition Center at APMC Kathlal
Showing Items To be
At- KATHALAL APMC , Taluka-KATHLAL, Dist: KHEDA GUJARAT
Quantities Tendered Rate
It.. estimated but
Item of work Rate in Unit according to
No. may be more or Rate in Word
Figure estimated quantities
Item No.1 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful
materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil One Hundred Seventeen Rupees Seven
Item No. 2 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and
stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or One Hundred Twenty Nine Rupees Eighty
soft soil Paise
Item No.3 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand
Three Thousand Five Rupees Seventy Six
3 26.30 broken stone aggregates 40 mmnominal size) and curing complete excluding cost of formwork in 3005.76 Cmt.
(A) Foundation and Plinth
Item No.4 Filling in plinth with sand under floors including watering ramming, consolidating
4 43.73 and dressing complete 460.19 Four Hundred Sixty Rupees Eighteen Paise Cmt.
Item No.5 Providing and laying controlled cement concrete M.200 and curing complete excluding
the cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Three Thousand Nine Hundred Fifty Four
5 49.70 Base of columns and Mass concrete 3954.09 Cmt.
Rupees Eight Paise
Item No.6 Providing and laying controlled cement concret M.200and curing complete excluding
the cost of formwork and reinforcement for reinforced concrete work in (C) Four Thousand Four Hundred Forty One
Slabs,landing,shelves,Balconies Lintels, Beams, Girders and Cantilever upto floor two level. Rupees Thirty Nine Paise
Item No.7 Providing formwork of ordinary timber planking so as to give a rough finish including
centering shuttering strutting and propping etc. Height of propping and centering below supporting
floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and One Hundred Seventy Three Rupees Thirty
plain concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete. Nine Paise
Item No. 8 Providing formwork of ordinary timber planking so as to give a rough finish including
centering shuttering strutting and propping etc. Height of propping and centering below supporting
floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and Two Hundred Fifty Two Rupees Ninety
8 285.81 plain concrete work in. (B) Flat surfaces such as soffits of supspened floors slabs Landings and the 252.93 Smt.
like. (1) Floors etc. upto 200 mm in thickness.
Item No. 9 Providing formwork of ordinary timber planking so as to give a rough finish including
centering shuttering strutting and propping etc. height of propping and centering below supporting
floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and
9 315.45 plain concrete work in. (G) Columns PillarsPosts and struts. (1) Square Rectangular Polygonal in 300.66 Three Hundred Rupees Sixty Five Paise Smt.
Item No. 10 Providing formwork of ordinary timber planking so as to give a rough finish
including centering shuttering strutting and propping etc. height of propping and centering below
supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced
One Hundred Ninety Five Rupees Sixty Six
10 257.97 concrete and plain concrete work in. (H) (1) Sides and soffits of Beams Beam Haunchings 195.67 Smt.
cantilevers Girders Bressumers and Lintels not exceeding 1 M. in Depth.
Item No11 Precast concrete block masonry (including quoin blocks jamb blocks closer etc.) with
solid concrete blocks of approved size made of cement concrete 1:3:6 mix (1- Cement : 3 coarse
sand: 6- graded stone aggregates of 20 mm and down grade) in foundation and plinth cement Three Thousand Six Hundred Thirty Five
morter 1:6 (Upto 10 ton) Rupees Fifty Three Paise
Item No.12 Precast concrete block masonry in partition walls 10 cm. thick with solid block of
approved size (including quion blocks Jamb blocks closer etc.) made of C.C.1:3:6 (1- Cement : 3- Six Hundred Fifty Four Rupees Fourteen
12 103.43 coarse sand : 6 graded stone aggregates 20 mm and down grade) (A) in C.M. 1:4 654.15 Smt.
Item No.13 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,
binding and placing in position complete upto floor two level
13 16080.01 76.21 Seventy Six Rupees Twenty One Paise Kg.
Item No.14 Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows
including Indian teak wood frames 12 cm x 7 cm. size including blackenamelled iron oxidized
fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, Five Thousand Five Hundred Thirty Three
complete. (ii) Fully Panelled Rupees Sixty Seven Paise
Item No.15 Providing and fixing glazed louvered glass windows and ventilators with teak
wood frame 10cm. x 7cm. size including 3 coats of oil painting to wood work etc.complete. Four Thousand One Hundred Forty Three
Rupees Fifty Six Paise
Item No.16 Providing and fixing rolling shutters of approved make made of 80 mm wide M.S.
laths inter-locked together through their entire length and jointed together at the ends by end locks
mounted on specially designed pipe shaft with bracket plates, guide channels and arragements for
Three Thousand Five Hundred Three
16 27.30 inside and outside locking with push-pull operation including the cost of hood cover and spring etc. 3503.41 Smt.
Rupees Forty Paise
complete.(A) Shutters having width below 3.5 M.
Quantities Tendered Rate
It.. estimated but
Item of work Rate in Unit according to
No. may be more or Rate in Word
Figure estimated quantities
Item No.17 Applying priming coat over new steel and other metel surface after and including
preparing the surface by throughly cleaning, oil,grease, dirt and other foreign matter and scoured
with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red
17 27.30 lead. 35.17 Thirty Five Rupees Sixteen Paise Smt.
Item No.18 Painting two coats (including priming coat) on new steel and other metal surfaces with
emamel paint, brushing interior to give an even shade including cleaning the surface of all dirt,dust
& other foreign matter.
18 27.30 87.81 Eighty Seven Rupees Eighty Paise Smt.
Item No.19 Providing and fixing M.S. grills of required pattern to wooden frames of windows etc.
with M.S. flats at required spacings and frame alround, square or round bars with round headed
19 21.60 bolts and nuts or by screws (A) Plain Grill. 101.17 One Hundred One Rupees Seventeen Paise Kg.
Item No.20 Providing 15mm thick cement plaster in single coat on Rough (Similar) side of single
or half brick walls for interio plastering upto floor two level and finished even and smooth in (i
Two Hundred Forty Two Rupees Twenty
20 730.79 Cementmortar1:3 (1-cement:3-sand) 242.28 Smt.
Item No.21 Providing 15mm thick cement plaster in single coat on Rough (Similar) side of single
or half brick walls for interio plastering upto floor two level and finished even and smooth in (i
21 282.19 Cementmortar1:3 (1-cement:3-sand) for plastering on ceilings and sofits of stairs upto floor two 73.02 Seventy Three Rupees Two Paise Smt.
level instead of plastering on walls.
Item No.22 20mm thick sand faced cement plaster on walls upto height 10 metres above ground
level consisting of 12 mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick Three Hundred Thirty Five Rupees Sixty
22 512.20 finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. 335.65 Smt.
Item No.23 Providing and laying polished Kota stone slab flooring over 20mm (Average) thick
base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 laid over and jointed with grey
cement slurry including rubbing and polishing etc. complete. (B) 30 mm thick One Thousand Fifty Six Rupees Twenty
Item No.24 Providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on
10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry
Nine Hundred Thirty Eight Rupees Fifty
Item No.25 Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm
broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered
to bring mortar creme out upto surface using white cement including rounding off junctions and
extending them upto 15 cm along the wall,clearing with water and oxalic acid etc. as directed.. Seven Hundred Forty Seven Rupees Twenty
Item No.26 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats)
to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and
One Hundred Fourteen Rupees Fifty Three
26 512.20 remains of loose powdered materials.etc complete 114.53 Smt.
Item No.27 Wall painting (two coats) with plastic emulsion paint of approved brand and
manufacture on undecorated wall surface to give an even shade including throughly brushing the
surface free from mortar droppings and other foreign matter and sand papered smooth.+ Extra over One Hundred Nineteen Rupees Forty Two
27 684.60 item 57 for every subsequent coat of wall painting with plastic emulsion pain of approved brand. 119.42 Smt.
Item No.28 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure
poluthene pipes of the following outside Dia. Low densidy, complete with special falnge
compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(G)110 Three Hundred Thirty Six Rupees Twenty
Item No.29 Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm
(Earthwork, bed concrete, foot reste and trap to be measured and paid for separately) (A) Vitreous
China.(I) Long pattern = White colour +Providing and fixing 100mm size P or S trap for water
closet squatting pan including jointing the trap with the pan and soil pipe in cement Mortar 1:1 (1-
Cement : 1-Fine sand)(A) Vitreous China.+Providing and fixing in Cement Mortar 1:3 (1-Cement : One Thousand Three Hundred Sixty Three
3-coarse sand)a, pair of white vitreous China 250mm x 130mm x 30mm footrest to long pattern Rupees Forty One Paise
squatting pan water closet.
Item No.30 Pro. And fixi. Electric monoblock submercible water pump of 1.00 HP. Single fase of
approved brand (Lubi or Crompton) with ISI mark with all necesaary fittigs cable wire etc.
30 2.00 complet 10100.00 Ten Thousand One Hundred Rupees No.
Item No.31 Providing erecting and fixing double coated ISI water tank of required capacity each
with all necessary fittings and connection etc. complete on terrace
31 6000.00 3.95 Three Rupees Ninety Four Paise Lit
Quantities Tendered Rate
It.. estimated but
Item of work Rate in Unit according to
No. may be more or Rate in Word
Figure estimated quantities
Item No.32 Constructing brick masonry chamber for underground C.I. Inspection chamber and
bends with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with
frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not
less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix
(1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside Two Thousand Nine Hundred Thirty Two
plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on Rupees Ninety Two Paise
walls and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for
single pipe line.
Item No.33 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with
jali of the following nominal diameter of self cleansing design with C.I scread down or hinged Five Hundred Fifty Eight Rupees Thirty
grating including the cost of cutting and making good the walls. Five Paise
Item No.34 Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and
water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square
mouth traps.(B) 150mm x 100mm size P or R type. One Thousand Two Hundred Forty Six
Rupees Ninety One Paise
Item No.35 Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-
pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends
35 96.00 prepared for collar joints including testing of joints complete.(B) 150mm 240.21 Two Hundred Forty Rupees Twenty Paise Rmt.
Item No.36 Providing and fixing cast iron spigot and socket soil,waste and venulating pipes of the
following nominal size. (B) 75mm. dia. Seven Hundred Thirty Nine Rupees Forty
Item No.37 Providing and fixing in position cowlvent to pipes (I) 75mm. dia.
Three Hundred Eighty Nine Rupees Seventy
Item No.38 Providing and fixing screw down bib taps of following size : (B) Brass chromium
plated screw down bib tap (I) 15mm. dia. One Hundred Eighty Six Rupees Eighty
Item No.39 Providing and fixing gun metal check or non - return fullway wheel valve. 32 mm
Three Hundred Fourteen Rupees Seventy
Item No.40 Providing and fixing gun metal check or non - return fullway wheel valve. 20 mm
Two Hundred Three Rupees Eighty One
Item No.41 Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2 working pressure
poluthene pipes of the following outside Dia. Low densidy, complete with special falnge
41 75.00 compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(A) 20mm 65.54 Sixty Five Rupees Fifty Three Paise Rmt.
Item No.42 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure
poluthene pipes of the following outside Dia. Low densidy, complete with special falnge
42 100.00 compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(A) 32mm 97.53 Ninety Seven Rupees Fifty Two Paise Rmt.
Item No.43 Providing and fixing chromium plated brass half trun flush cock of approved quality
including fixing in pipe line etc. complete.(iii) 32mm dia. Two Hundred Seventy Five Rupees Seventy
Item No.44 Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats
with dry masonry work at top for 45cm. height including covering the top with stone including Three Thousand Three Hundred Sixty
providing vatas in C.M. 1:3 with finishing curing etc. complete as directed. Rupees Sixty Nine Paise
Item No.45 Providing and fixing C.I. Mnhole cover 0.60m x 0.45m. size having weight not less
than 35Kgs. Nine Hundred Fifty Eight Rupees Sixteen
Item No.46 Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (i)
25mm dia.. One Hundred Thirty Two Rupees Eighty
Item No.47 Providing and fixing wash basin with single hole for pillar tap with C.I or M.S.
brackets painted white incl.cutting holes and making good the same incl.32mm dia.C.P brass waste,
and 15mm dia.capstan head pillar tap union . Vitreous china flat back wash basin 550 mm *
400mm size white in colour.+Providing and fixing C.P. brass waste for washbasin or sink. (A) One Thousand Eight Hundred Thirty
32mmdia.+ Providing and fixing pillar tap, capstan head, screw down high pressure with screws, Rupees Fifty Eight Paise
shanks and back nuts. (i) 15mm dia.
Item No.48 Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm & earth wire of
1.5 sq. mm (green) both are of ISI marked 1.1 kv grade FRLS PVC insulated multi strand copper
wires upto max length of 10 mt, in below type of pipe erected with 6A Tissino Type ISI marked
flush type switch / bell push and accessories erected on Metal / PVC/Wooden Box covered with
Three Hundred Twenty Nine Rupees
48 14.00 mm thick PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary Lamp holder/ceiling rose / 329.26 Point
Twenty Six Paise
H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories erected flushed
on wall/ceiling complete
Item No.49 Providing & erecting Approved make Ceiling Fan with double ball bearing ISI mark
with Condenser 230 volt A.C.50 Hz 1200 mm sweep complete having 3 blades aluminium body
and blade sets having ornamental design shanks , canopy erected with earthing. [ Make shall be Two Thousand Three Hundred Eleven
approved by Engineer in Charge] Rupees Eighty Nine Paise
Item No.50 Approved make fluorescent tube 60 cms. 18/20 watt erected, if required. Cat.III
50 14.00 51.51 Fifty One Rupees Fifty One Paise Nos
Quantities Tendered Rate
It.. estimated but
Item of work Rate in Unit according to
No. may be more or Rate in Word
Figure estimated quantities
Item No.51 Providing & erecting Switch board for Computer or electric apparatus consisting of
following modular type accessories mounted with PVC / Metallic concealed/open box with single
mounting base frame covered with textured/metallic /white front plate,modules erected with
necessary connections as directed
One Thousand Eighty One Rupees Seventy
51 14.00 1 no. 6A/16A universal plug-switch combined. 1081.71 Nos
3 nos. 6A Switch
3 nos. 6A 5 pin Plug ,For Modular Type Accessories Cat. III
Item No.52 Providing and erecting Sheet Steel powder coated MCB distribution board - flush /
surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &
3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of
same company of MCB to be used) suitable for (A) single phase incoming and horizontal single One Thousand Six Hundred Eighty Rupees
phase outgoing (b) sheet steel double door (IP-43),(v) 16 way Sixty Four Paise
Item No.53 Supplying and erecting MNES certified SOLAR STREET LIGHT fitting made from
M.S. Body powder coated / painted with corrosion resistant paint with gasket & transparent cover
with following CFL non retro lamp with choke, holder & accessories. Fitting shall be mounted on
75/80 mm B class G.I. pipe pole up to 5.5 mtr load complete erected with C.C. Foundation duly
painted with two coats of red oxide and corrosive resistant paint. Complete with tubular battery, Twenty Thousand Five Hundred Forty
inverter, charge controller with photo sensor switch & necessary wiring complete erected Three Rupees Forty Paise
connected & commissioned in approved manner. [A]1x11w CFLPVModule:74W Battery Capacity
Item No.54 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block
60mm thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as per
approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and
filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Six Hundred Eighty Six Rupees Ninety
54 32.00 Complete. 686.90 Smt.
Item No.55 Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections using
water proof board of size 1220 mm x 1830 mm x 8.0 mm suspended by GI suspender channel of
size 25 mm x 3 mm with intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm
center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c and perimeter
channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges & drops incl.paper tap sand sofit One Thousand Five Hundred Fifteen
cleat, anchor fastener, scoch bolt connecting cleat,joining compound top coat on ceiling Rupees
incl.making necy.opening for light fitting,diffuser etc. comp.
Item No.56 Carrying out wall treatment for termite control including spraying with chemical
solution in oil base including labour and material Using Chlorpyriphos 20 ECAs per IS 6313 part -
II (1% concentration by mass) is recommended i.e one litre chemical emulsion diluted with 19 liter
56 130.00 oil base. Total solution will be 20 liters inclusive of one liter chemical emulsion application at the 32.62 Thirty Two Rupees Sixty Two Paise Smt.
rate of 7.5 litre chemical / Sqm of surface is recommended as per I.S.
Item No.57 Providing and erecting approved make split air-conditioning unit consisting of copper
condensing unit with fan motor, hermetically sealed rotary compressor with accessories etc. duly
connected separately erected evaporating unit and blower motor with its accessories by means of
extra supplied proper insulated copper tubing,drain PVC pipes suitable for ( cost includes powder
Thirty Seven Thousand Nine Hundred
57 1.00 coated Stand, Eco Friendly green gas charging, 15A plug top & Remote Control) with necessary 37921.46 NO
Twenty One Rupees Forty Six Paise
core cutting. For 4/5 star Rating of current year (b) for 1.5 ton capacity
Item No.58 Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make
Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of
corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron
galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia
of 14 mm with constant ohmic value surrounded by highly conductive compound with high
charge dissipation suitable for following type of applications with chamber and heavy duty Five Thousand Eight Hundred Forty Two
cover.(approved make OEM has to submit test certificate including value of earth resistane of Rupees Eighty Five Paise
installation. [A] For electrical installation up to 440 V Length of Pipe - 1 Mtr Back filling
compound - 1 Nos. of Bag of 15 Kgs.
SCHEDULE - B Total
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1.TITEL PAGE.pdf
2.N PROCURE.pdf
3.FORM B1.pdf
4. final Sch-B - SALES CUM EXHIBITION CENTER.pdf
5.COMMAN AND ITEM WISE SPECIFICATION.pdf
6.sales cum exhibition center draw.pdf
7. Terms And condition.pdf
7. Terms And condition 1.pdf
CORRIGENDUM
2.N PROCURE 1.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .