ADDN ALTN AND SPECIAL REPAIR TO FENCING AT CHILDREN PARK KATARIBAGH AND ADDN ALTN TO HQSNC DPC BLDG NO 177A AT NAVAL BASE KOCHI

Amount

Demolition of brick work/ stone masonry built in cement mortar including all quoins, arches, pillars etc. all as specified and as directed by the Engineer in Charge.

Demolition of reinforced cement concrete, any description and any position, not otherwise specifically provided for, complete all as specified and as directed.

Dismantling structural steel work including doors & gates, but excluding framed truss etc., complete all as specified and directed.

M&L for Plain Cement Concrete 1:4:8, Type D-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete, complete all as specified and directed.

M&L for TMT bars in reinforcements, 10mm dia. and over, including cut to length, bend to required shape, cranking/ hooking ends if necessary and binding with 0.9mm dia. MS wire annealed or welding so as to secure the bar firmly in position/ required shape, complete all as specified and as directed by Engineer in Charge.

M&L for TMT bars 5mm dia. and over and including 10mm dia., in stirrups, spacers and binders etc., cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for Reinforced Cement Concrete 1:2:4, Type B-1, using 20mm graded stone aggregate for foundations including rafts, footings, foundation beams, plinth beams, bases for columns, basement slabs etc., complete all as specified and as directed by Engineer in Charge.

M&L for Reinforced Cement Concrete 1:2:4, Type B-1, using 20mm graded stone aggregate for Beams, Cantilevers, bressummers, lintels over 1.5m span, complete all as specified and as directed by Engineer in Charge.

Use and waste of form work, rough finished, flat to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter, all as specified and as directed.

Use and waste of form work, rough finished, flat to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc., also splays between floors and beams, etc., all as specified and as directed.

M&L for Precast Cement Concrete block masonry with solid blocks in 1:3:6, (Type C-1) using 20mm graded stone aggregate, exceeding 10 cm in width and setting in Cement Mortar 1:6, complete all as specified and directed.

M&L for 8mm thick rendering in Cement Mortar 1:4, with approved Water Proofing Compound over backing coat of 12mm thick in Cement Mortar 1:6 with and including liquid WPC, to fair surfaces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium Acrylic Emulsion Paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489:2004, Alkali, fungal and dirt resistant exterior paint of required shade (Company Depot Tinted), with silicon additives @ 1.43 litre/ 10 Sqm, over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new surfaces, complete all as specified and as directed by Engineer in Charge.

S&F MS Post and Struts in fencing, including cutting tops to shape as directed, drilling holes, notching for wire etc.; Flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

S&F 5 to 10mm diameter of neck Mild Steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm long, complete all as specified and as directed.

Mild steel round bars 10 mm dia. and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (Annealed), not less than 0.90 mm dia. or securing with clips, quality conforming to Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165), complete all as specified and directed.

Supply and fixing MS Galvanised Chain link fencing of grid size 50mm x 50mm x 3.10mm dia. wire (Weight not less than 3.25 Kg/ Sqm), including provn of line wires, rails, straining bolts etc., including provision of GI binding wire, complete all as specified and as directed by Engineer in Charge.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; adders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc., conforming to Fe.290 (Gde-E-165), complete all as specified and as directed by Engineer in Charge.

M&L for preparing new steel surfaces and applying two coats of anticorrosive paint over a coat of primer, complete all as specified and directed.

Dismantling floor hearth or wall tiling, including cement mortar bedding, removing unserviceable tiles to store and rubbish of the premises, complete all as specified and directed by Engineer in Charge.

M&L for Non-Skid ceramic tiles, coloured, 7mm to 8mm thick, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors, set and jointed in neat cement slurry and pointed with white or coloured cement to match, over 10mm thick screed in Cement Mortar 1:4 for laying floor finishes, complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surfaces, 600mm x 300mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match, including and over 10 mm thick plastering on fair faces of brick work or concrete surfaces in Cement Mortar 1:3, complete all as specified and directed.

M&L for light shade double charged Vitrified tiles 9-10mm thick (square/ rectangular) polished, area of tiles not exceeding 0.36 Sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over 10mm thick cement screed in Cement Mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

Taking down chowkat with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each, complete all as specified and as directed.

S&F fibre glass reinforced plastic (FRP) door frame of 100mm x 60mm thick moulded with 2 mm thick FRP laminate outer core and inner core filled with seasoned and treated rubber wood and PU foam with gel coat finish weighing an average of 4 Kgs per mtr. Make : Festel Tanks Pvt Ltd / Rogins Fibre Glass /Poly cast Industries Ltd / Fenesta Building Systems / Quality Decor

S&F 30mm thick factory made FRP door shutter 30 (+/-1)mm thick made with unsaturated polyester resin moulded to 3mm FRP laminate for forming hollow rails and styles suitably treated and seasoned rubber wood are to be filled inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate planes get coat finish and with an average weight of 8 Kg as per Sqm. Make : Festel Tanks Pvt Ltd / Rogins Fibre Glass /Poly cast Industries Ltd / Fenesta Building Systems / Quality Decor

S&F 100mm long stainless steel butt hinges for PVC door, complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and directed.

S&F 150mm long cast type aluminium handle, complete all as specified and directed.

S&F PVC SWR 'S'/'P' trap of bore 110 mm, complete all as specified and directed.

S&F in repairs, Vitreous China wash down water closet pan (pedestal pattern), white, (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and as directed.

S&F in repairs, Vitreous China superior coloured wash down water closet, pedestal pattern, including plastic seat cover, complete all as specified and as directed.

S&F in repairs, low level PVC flushing cistern, 10 litres capacity, white colour, with inlet, ball valve, float and handle, including brackets, complete all as specified and directed.

S&F Hand Shower (Health Faucet), 8 mm dia., with 1 meter long flexible tube and wall hook, complete all as specified and directed. Make : PRAYAG Cat. No. BHS 48 & BEA 81

S&F in repairs, vitreous china wash hand basin, white, flat back of size 580mm x 450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, complete all as specified and directed.

S&F 15mm bore, cast copper alloy chromium plated Pillar Tap (fancy type), with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, complete all as specified and directed.

S&F Brass, chromium plated tubular towel rail, 20 mm dia., D Type, 60cm long between flanges, complete all as specified and directed.

S&F fancy Bib taps, Chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F 32 mm dia. Waste fittings, brass, chromium plated for glazed ware sinks, basins etc., with long screwed shanks and fly-nuts, flange end, bedded in red lead cement and other end fixed, complete all as specified and directed.

M&L for 15mm bore High Density Poly-Ethylene pipes (HDPE) of pressure rating 6 Kgf/ Cm2, fixed to walls, ceilings or in floors etc., complete all as specified and directed.

M&L for 20mm bore High Density Poly-Ethylene pipes (HDPE) of pressure rating 6 Kgf/ Cm2, fixed to walls, ceilings or in floors etc., complete all as specified and directed.

Cutting chases, pinning in, making good to brick work facings where required and pointing in Cement Mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth, complete all as specified and directed.

M&L for 110 mm dia. PVC SWR Pipe, single socketed in any length, with rubber rings joints, fixed to walls, complete all as specified and directed.

M&L for 110mm bore PVC SWR Bends, any radius with access door, complete all as specified and directed.

M&L for 15mm size PVC Connection with PTMT nuts, of 600mm length, complete all as specified and directed.

S&F PTMT Towel Ring, fixed with and including chromium plated brass screws and wooden/ plastic cleats (Minimum weight 90gms), complete all as specified and directed.

Taking down cement plaster of any description, complete all as specified and directed.

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in Cement Mortar 1:6, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparing new plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep and getting out in loose/ soft soil, complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 15cm thick, complete all as specified and directed.

M&L for Precast RCC Rectangular covers on drains/Manhole of various sizes, of M-25 grade cement concrete for RCC work, including cost of cantering, shuttering and reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways, neat cement punning on finished surface, properly encased on all edges with 1.6mm thick, 100 mm wide MS sheet duly painted including priming coat, reinforcement to be welded edges with MS sheet incl provision of 2 Nos 12mm dia bar for hooks etc bend to shape complete all as specified and directed. Note: .The quoted rate shall include the cost of formwork, cost of transportation to site of work and erecting the cover slab in the specified locations specified and as directed.

M&L for Cement Concrete 1:4:8, Type D-2 using 40mm graded stone aggregate in surface channels and drains, complete all as specified and directed.

M&L for Precast Cement Concrete block masonry with solid blocks in 1:3:6, (Type C-1) using 20mm graded stone aggregate, exceeding 10 cm in width and setting in Cement Mortar 1:4, complete all as specified and directed.

S&F 6 to 8mm dia. TMT bars in reinforcement, cut to length, bent to shape required including cranking, bending hooking and binding with mild steel wire (annealed), not less than 0.9mm dia. or securing with clips, complete all as specified and directed.

M&L for 15 mm thick plaster on fair faces of brick or concrete surfaces in Cement Mortar 1:4, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for Cement Concrete 1:3:6, (Type C-2) bed to 110mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid & tested; complete all as specified and directed.

Removal of surplus soil to a distance not exceeding 50m and not exceeding 1.5m above the starting point, as directed by Engineer in Charge.

M&L for provision of Hume Pipe Septic Tank for 25 users capacity including AC vent pipe, earth work excavation in soft/ loose soil, erecting hume pipe septic tank in position in PCC 1:3:6 and all other accessories required such as vent cowl etc. and making good the disturbed surface and removing surplus soil and including connecting to the sewer line etc., complete all as specified and directed.

POOJA ENGINEERING WORKS

MS BUILDERS

Aarjay Tech Engineering

Albert Rebello and Company

Oriental Constructions

Anaswara Constructions

ANIE JOHN CONTRACTORS

M/s.Rejoy Constructions