WBPHE04_RSD_2025-26_SL_4

Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation.

(A) Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) a) Do- by fine sand

Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level, and filling joints with powered or local sand.

Brick work with 1st class bricks in cement mortar (1:6) (b) 1st Class Brick Work (1:6)

Hire and labour charges for shuttering with cantering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-in-charge.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. i) Pakur Variety

Plaster (toe wall, floor, ceilingetc.) with sand and cement mortar including rounding of for chamfering corners as directed and raking out joints including throating, no singanddrip course, scaffolding / staging where necessary (Groundfloor). [Excluding cost of chipping over concrete surface] I) With (1:4) cement mortar external surface

(a) 10mm thick plaster

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. i) Pakur Variety

125 mm thick brickwork in cement morter (1:4)

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement In ground floor. (as necessary) and marble3 mm. thick topping (High polishing grinding on this item is notpermitted with ordinary cement). (i) 20 mm. thick

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish)or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete asper manufacturer's specification and as per direction of the EiC. one Coat Ground Floor,one coat upto 4mtr.from G.L. b) Two Coats

Protective and Decorative Acrylic exterior emulsion paint orapproved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of malcrial,labour, scaffolding and all incidental charges bul excluding the cost of primer. Two Coat a) Premium 100% Acrvlice mulsion uoto 4 mtr.

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (ii) Grill weighing above 16 Kg./sq.mtr and above

Supplying fitting and fixing in position approved P.V.C.door frame (Mattfinish) made ofextruded P.V.C.multichamber hollo wsection having dimensions 60mm x50mm x 2mm(+/-0.2mm),horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitablespace for placing hinges, on esteel tube 40mm x20mm x1.20 mm will be inserted on one full vertical side ofthe frame(hinge side) as reinforcement ,theframe will then befixed in the opening with the helpofP.V.C.expandable fastner/wooden gutties and galvanised steel screws including cost ofall materials and labour, hire charge softools and appliances, carriage of all materials, taxes and all other incidental charges complete.

PVC Door Shutter-37 mm thick:Supplying fitting and fixing P.V.C.doorshutter of approved quality & shade in position ,the style & rail ofthe P.V.C.door shutter will be made of rigid P.V.C. rnulticavity hollow chamber of suitable size and section with2.0 mm(+/-0.2mm) wall thickness,the section will have 2nos.builtin beads, horizontal &vertical section shall befixed toeach other by self tapping screws and 2 nos.of solid plastic or M.S.tubular galvan is ed brackets of length 200mm x80mm and otherlOOmmxlOOmm both 1.20 mm in each corner of theshutter frame for placing hinges.Polymer based multicavity hollowsection of105mmx37mm with 2.0 mm(+/- 0.2 mm) wall thicknesswill be fitted in the middleas lock rail reinforced by solid polymer bar of 200mm longat both endsabd screws from both sides.Thes ection frame will then be fitted in byPVC panels of size 100mmx 20mm with wall thickness ofl.2 mm(+/-0.2mm) and 2 nos. of 6mm dia and screws from both sides 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges /hasp bolt /towerbolt/ door ring are required to bestrong enoughto with stand wearand tear.The rateisinclusive ofcostofall materials,labour,and hire of tools and plants and appliencies. Carriage ofall materials taxesand all other incidental charges complete.The rate isexclusive of cost of hinges,hasp bolt,towerbolt.door ringetc. In ground floor.

Supplying, fittingand fixing PVC pipes ofapproved make ofSchedule 80 (medium duty) conforming toASTMD -1785and threaded to match with GI Pipesas perIS: 1239 (Part - I).with all necessary accessories, specials viz.socket, bend, tee, union, cross, elbo,nipple, longscrew,reducing socket,reducingtee,short piece etc.fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coatsof painting with approvedpaint inany position above ground. (Payment will bemadeon thecentre line measurements oftotal pipe lineincluding all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work 15mm dia

20 mm dia

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming toI.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.iii) 750mm long.

Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.(JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/ SSL

Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets. (i) 450 mm X 300 mm size

Supplying, fitting and fixing pillar cock of approved make. b) PTMT Pillar Cock - 15 mm. (Prayag or equivalent). (iii) 900 mm long

Supplying, fitting and fixing C.I. bracket including two coats of painting. a) Wash basin, Dental spitton

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.

e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (a) 500 litre capacity

Labour for hoisting plastic water storage tank. a) Upto 1st story from G.L. (i) Upto 1500 litre capacity.

Labour for punching hole in plastic water storage tank upto 50 mm dia

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length b) 110 mm

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 ii) Plain Tee

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (B) Fittings ii) Vent Cowl

Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. (a) With 'P' trap

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992ii) Pipe Clip

xi) Door Bend (T.S.) 110 mm

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor/upto 4 m II. JSW/JSPL/SHYAM/ SRMB/BMASL/ELECROSTEEL/SSL

Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (a) E.W.C. ii) Plastic (hallow type) white

Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 20 mm dia

Add GST @ 18% on total of Sl.No.1.00 to Sl.No.39.00 i.e on Rs.179405.78

Add Cess @ 1% on total of 1.00 to Sl.No.39.00 + GST i.e on Rs.211698.82