Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.8 LAccepted-AOC | ₹6.8 L | L1 | Accepted-AOC L1 accepted |
| 2 | L2₹7.2 LRejected-AOC PERUMAMATTEM PINARMUNDA KUNNATHUNADU ERANAKULAM | ERNAKULAM | KERALA | 680667 | ₹7.2 L | L2 | Rejected-AOC L2 rejected |
| 3 | L3₹7.3 LRejected-AOC KURUMOLATHU MAZHUVANNOOR MAZHUVANNOOR GRAMA PANCHAYAT | KOTTAYAM | KERALA | 686001 | ₹7.3 L | L3 | Rejected-AOC L3 rejected |
| 4 | L4₹7.4 LRejected-AOC | ₹7.4 L | L4 | Rejected-AOC L4 rejected |
| 5 | Rejected-Technical | - | - | Rejected-Technical L8 Rejected. |
| Sl No | Description | Qty | Unit | ABDUL MANAF L2 | ELDHO ALIAS L3 | SHALJU VARGHESE KATTUPARAMBIL L4 | SIDHEEQ PA L6 | ANIL KUMAR K L8 | K.M shamsudheem L7 | PILLARRA VENTURES PVT LTD L5 | AMEER ASSAINAR L1 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00Maintenence work | |||||||||||
| 1.00 | 14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand) | 54.9 | sqm | 495.1 ₹27,180.99 | 450 ₹24,705 | 500 ₹27,450 | 508.95 ₹27,941.36 | 540 ₹29,646 | 500 ₹27,450 | 650 ₹35,685 | 466.69 ₹25,621.28 |
| 1.00 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | 54.9 | sqm | 69.05 ₹3,790.85 | 74 ₹4,062.60 | 70 ₹3,843 | 70.98 ₹3,896.80 | 75.2 ₹4,128.48 | 80 ₹4,392 | 90 ₹4,941 | 65.08 ₹3,572.89 |
| 1.00 | 15.14.2:Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead:Of sectional area below 40 square centimeters | 450 | metre | 15.73 ₹7,078.50 | 10 ₹4,500 | 18 ₹8,100 | 16.17 ₹7,276.50 | 17.2 ₹7,740 | 18 ₹8,100 | 100 ₹45,000 | 14.82 ₹6,669 |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 945 | kg | 197.21 ₹1.9 L | 157 ₹1.5 L | 190 ₹1.8 L | 202.73 ₹1.9 L | 214.75 ₹2.0 L | 220 ₹2.1 L | 155 ₹1.5 L | 185.9 ₹1.8 L |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 810 | kg | 159.74 ₹1.3 L | 160 ₹1.3 L | 150 ₹1.2 L | 164.21 ₹1.3 L | 174 ₹1.4 L | 170 ₹1.4 L | 130 ₹1.1 L | 150.58 ₹1.2 L |
| 1.01 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 142.8 | sqm | 719.19 ₹1.0 L | 840 ₹1.2 L | 800 ₹1.1 L | 739.31 ₹1.1 L | 783.2 ₹1.1 L | 750 ₹1.1 L | 700 ₹99,960 | 677.91 ₹96,805.55 |
| 1.01 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 36 | metre | 482.55 ₹17,371.80 | 550 ₹19,800 | 500 ₹18,000 | 496.06 ₹17,858.16 | 525 ₹18,900 | 565 ₹20,340 | 425 ₹15,300 | 454.87 ₹16,375.32 |
| 1.01 | OD338268/2025-2026:Providing and fixing false ceiling and wal paneling with 9 mm thick TKT PVC Panel board of approved quality as per the directions from the Engineer in charge. | 75 | sqm | 1,400 ₹1.1 L | 1,600 ₹1.2 L | 1,450 ₹1.1 L | 1,439.19 ₹1.1 L | 1,400 ₹1.1 L | 1,600 ₹1.2 L | 1,150 ₹86,250 | 1,319.68 ₹98,976 |
| 1.01 | 17.2.2:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked black solid plastic seat and lid | 3 | each | 5,811.7 ₹17,435.10 | 6,500 ₹19,500 | 5,500 ₹16,500 | 5,974.35 ₹17,923.05 | 153.5 ₹460.50 | 6,805 ₹20,415 | 8,000 ₹24,000 | 5,478.24 ₹16,434.72 |
Tender Value
₹8.5 L
EMD Value
₹21,183
Closing Date
11 Mar 2026, 3:00 pmClosed
AEE
o/oAEEBuildingsSubdivisionEKM
The main items included in the estimate are repairs to plaster primerroofing sheet truss work sanitary and plumbing items cleaning of septic tanks and waste pits plumber for repairing and changing the plumbing and sanitary lines carpenter
2026_PWD_843545_1
88/AEE/BL/EKM/2025-26
Open Tender
Civil Works - Buildings
180 days
Kakkanad
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,870
Yes
₹21,183
Yes
25 May 2026
4 Mar 2026
13 Mar 2026
4 Mar 2026
11 Mar 2026
4 Mar 2026
Maintenence work
14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
15.14.2:Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead:Of sectional area below 40 square centimeters
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)
OD338268/2025-2026:Providing and fixing false ceiling and wal paneling with 9 mm thick TKT PVC Panel board of approved quality as per the directions from the Engineer in charge.
17.2.2:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked black solid plastic seat and lid
17.18.1:Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.10 litre capacity - White
17.7.4:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
18.58.2.1:Providing and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular lid150 mm nominal size square 100 mm diameter of the inner hinged round grating
50.18.8.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2
50.18.9.17.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall
50.18.9.19.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall
50.18.9.9.2:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2
50.18.9.20.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend
50.18.9.22.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow
50.18.9.22.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend
OD338715/2025-2026:Clearing waste pit and manhole and removing the waste away from the site including labour and resetting the cover slab by pointing with cement mortar
OD338275/2025-2026:Engaging Scavenger for various works as per the direction of engineer in charge
OD144249/2025-2026:Engaging carpenter for various wood works as per the direction of engineer in charge
OD144156/2025-2026:Engaging plumber for various plumbing works as per the direction of engineer in charge
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1423850.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
viewsbdperiyarmens.pdf
Tender Documents • 1.63 MB
BOQ_1423850.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid