35/2025-26

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be leveled and neatly dressed. All kind of soil USOR. Item.no. 16.4 -P.no.207

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. Soft rock with or without blasting or bituminous pavement / cement concrete road. In ordinary or Soft rock with or without blasting or bituminous pavement / cement concrete road. USOR.Item.no. 16.6-(a) P.no.208

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. Soft rock with or without blasting or bituminous pavement / cement concrete road. Hard rock requiring chiseling/ where blasting is prohibited.) USOR.Item.no. 16.6-(C) P.no.208

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 m lead as per direction of engineer-in- charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) USOR. Item.no. 16.15.1-P.no.209

Providing & laying mechanically mixed cement concrete 20mm nominal size graded crushed stone excluding cost of centering & shuttering. 1:2:4 (M-15) . USOR.Item.no. 16.23 (a)(ii)-P.no.210

Providing, Laying, Jointing & field testing of PE pipes made from 100% virgin material (Earlier know as High Density Polyethylene pipes, PE 100 ) confirming to IS 4984/14151/ 12786/13488 with necessary jointing material llike mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then mechanically pressing the ends together against each other to form a monolithic & leak proof joint by thermosetting process. It] may be required to be done with Jack/ Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical iointed) USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.1 -P.no.9 ,75 mm dia HDPE 6 Kg/cm²

Providing, Laying, Jointing & field testing of PE pipes made from 100% virgin material (Earlier know as High Density Polyethylene pipes, PE 100 ) confirming to IS 4984/14151/ 12786/13488 with necessary jointing material llike mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then mechanically pressing the ends together against each other to form a monolithic & leak proof joint by thermosetting process. It] may be required to be done with Jack/ Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical iointed) USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.1 -P.no.9 , 90 mm dia HDPE 6 Kg/cm²

Providing, Laying, Jointing & field testing of PE pipes made from 100% virgin material (Earlier know as High Density Polyethylene pipes, PE 100 ) confirming to IS 4984/14151/ 12786/13488 with necessary jointing material llike mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then mechanically pressing the ends together against each other to form a monolithic & leak proof joint by thermosetting process. It] may be required to be done with Jack/ Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical iointed) USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.1 -P.no.9 ,110 mm dia HDPE 6 Kg/cm²

Providing, Laying, Jointing & field testing of PE pipes made from 100% virgin material (Earlier know as High Density Polyethylene pipes, PE 100 ) confirming to IS 4984/14151/ 12786/13488 with necessary jointing material llike mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then mechanically pressing the ends together against each other to form a monolithic & leak proof joint by thermosetting process. It] may be required to be done with Jack/ Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical iointed) USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.1 -P.no.9 , 90 mm dia HDPE 10Kg/cm²

Providing & fixing of following Ductile iron double flanged sluice valves as per I.S.:14846-2000 fitted with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete, Class PN 10, 80mm dia, USOR 4.41 p- 71

Providing & fixing following cast iron double flanged single door reflux (non return) valves including jointing & testing with cost of jointing material such as bolts,nuts and rubber insertion all complete as per IS :5312 (Part I) Class PN 1.0 100 MM Dia 8.4 a P-113

Providing and fixing following check (non-return) valves Class- II, confirming to IS-778/1984 (Reaffirmed 2005) female ends, tested to 21.09 kg/sq.cmt. 50 mm dia Flanged USOR item 6.8 P- 89

Providing & fixing following ductile iron single chamber triple function temper proof air valves, small orifice with screwed end as per IS : 14845-2000 including jointing & testing with cost of jointing material and rubber insertion all complete as per IS :13095-1991, Class PN- 10, 50mm dia USOR 4.50, P-73

Providing and laying including testing Bend 90̊ confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.2 -P.no.9 , 75mm dia 6 kg/sq.cm

Providing and laying including testing Bend 90̊ confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.2 -P.no.9 , 90mm dia 6 kg/sq.cm

Providing and laying including testing Bend 90̊ confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.2 -P.no.9 110 mm dia 6 kg/sq.cm

Providing and laying including testing Bend 90̊ confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.2 -P.no.9 160 mm dia 6 kg/sq.cm

Providing and laying including testing Bend 90̊ confirming to IS specifications . USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.2 -P.no.9 , 90mm dia 10 kg/sq.cm

Providing and laying including testing Bend 45 confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.3 -P.no. 10 75mm dia 6 kg/sq.cm

Providing and laying including testing Bend 45 confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.3 -P.no. 10 90mm dia 6 kg/sq.cm

Providing and laying including testing Bend 45 confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.3 -P.no. 10 110mm dia 6 kg/sq.cm

Providing and laying including testing Bend 45 confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.3 -P.no. 10 160 mm dia 6 kg/sq.cm

Providing and laying including testing equal tee confirming to IS specifications . USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.4 -P.no. 10 75 mm dia 6 kg/sq.cm

Providing and laying including testing equal tee confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.4 -P.no. 10 90 mm dia 6 kg/sq.cm

Providing and laying including testing equal tee confirming to IS specifications. USOR 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.4 -P.no.10 90 mm dia 10 kg/sq.cm

Providing and laying including testing pipe end confirming to IS specifications. USOR 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.5 -P.no.10 90 mm dia 6 kg/sq.cm

Providing and laying including testing reducer confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.6 -P.no. 11 75x63 mm dia 6 kg/sq.cm

Providing and laying including testing reducer confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.6 -P.no. 11 90x75 mm dia 6 kg/sq.cm

Providing and laying including testing reducer confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.6 -P.no. 11 110x90 mm dia 6 kg/sq.cm

Providing and laying including testing End Cap confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.8 -P.no.11 , 90 mm dia 6 kg/sq.cm

Supply & Filling moorum for pipe bedding or over the pipe ( including supply of moorum ) PHE USOR Item 16.11 (a) Page 208

Provision for Jointing of TW to Rising Main with cost of Material/ specials such as GI Union / CI Flange, GI Reducer UPVC MTA FTA etc. as per requiement of site i/c cost of labour etc. complete as per approved specification and as directed by Engineer in charge USOR 17.19 P 228-229

Provision for jointing of Rising main to sump well/OHT and OHT to Distribution pipe line with cost of material/specials such as Bends, MTA as per rerquirement of site i/c cost of labour with excavation, labour as per requirement complete as per approved specification and as directed by Engineer in charge.USOR 17.20 P-229

Construction of Brick masonry valve chamber with 20 cm thick wall in 1:6 C.M. with 12mm thick 1:4 Cement Plaster and base course 10 cm. thick in M-15. Inside Dimensions 90 x 60 x 100cm with - Heavy Duty SFRC chamber cover with frame size 130cm x 100cm x 10cm including cost of materials, labour etc. complete. USOR. 2nd Amendment OF Issued vide order no. 254 dt 06.08.2020 item no. 17.46.2, Page no 7)

Filling available excavated earth in trenches, lead up to 50m and lift up to 1.5m in all kind of soil excluding watering and ramming.. USOR.Item.no.16.10 (b)-P.no. 208

Providing laying and jointing of following galvanized (MS) Pipes with specials (such as bends, elbows, tees etc) class light, medium & heavy including testing of joints, cost of pipes, specials and jointing materials all complete. Pipes and sockets conforming to IS-1239/2011 Part- II 50 mm Dia Medium, 6.1 P-87

Fabrication of M.S. pipes & specials from steel plates as per relevant IS specifications inclusive of cost of all materials, for any thickness as per design, inspection charges, testing, transit insurance, loading/ unloading, FOR site and stacking etc. complete as per direction of the Engineer in charge. fabricating of pipes and specials from steel plates .USOR.Item.no. 10.2 P - 137

Providing making and testing of Consumer Service Connection (Functional House Hold Tap Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass insert flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE 20mm dia /Gl pipe 15 mm dia (medium class), brass tap with Stainesless steel coating etc. all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), Pre-fabricated cement concrete platform in CC M-20 grade over 75 mm thick M-10 (1:3:6) base and Pre-fabricated Milestone shaped cement concrete stand post as per attached drawing and specifications. Complete item. For connection with 20 mm dia MDPE pipe upto 5 mtr and concrete road crossing is necessary USOR 8th Amendment OF Issued vide order no. 368 dt 27.01.2023 Item.no.17.41.1 -P.no. 1

Providing making and testing of Consumer Service Connection (Functional House Hold Tap Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass insert flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE 20mm dia /Gl pipe 15 mm dia (medium class), brass tap with Stainesless steel coating etc. all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), Pre-fabricated cement concrete platform in CC M-20 grade over 75 mm thick M-10 (1:3:6) base and Pre-fabricated Milestone shaped cement concrete stand post as per attached drawing and specifications. Complete item. For connection with 20 mm dia MDPE pipe more than 5 mtr and upto 10 metere and concrete road crossing is necessary USOR 8th Amendment OF Issued vide order no. 368 dt 27.01.2023 Item.no.17.41.2 -P.no. 1

Providing making and testing of Consumer Service Connection (Functional House Hold Tap Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass insert flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE 20mm dia/Gl pipe 15 mm dia (medium class), brass tap with Stainesless steel coating etc. all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), Pre-fabricated cement concrete platform in CC M-20 grade over 75 mm thick M-10 (1:3:6) base and Pre-fabricated Milestone shaped cement concrete stand post as per attached drawing and specifications. Complete item. For connection with 20 mm dia MDPE pipe upto 5 Metr and concrete road crossing is not required. (Distribution pipe line is on the same side of house). USOR 8th Amendment OF Issued vide order no. 368 dt 27.01.2023 Item.no.17.41.3 -P.no. 1

Providing making and testing of Consumer Service Connection (Functional House Hold Tap Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass insert flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE 20mm dia/Gl pipe 15 mm dia (medium class), brass tap with Stainesless steel coating etc. all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), Pre-fabricated cement concrete platform in CC M-20 grade over 75 mm thick M-10 (1:3:6) base and Pre-fabricated Milestone shaped cement concrete stand post as per attached drawing and specifications. Complete item. For connection with 20 mm dia MDPE pipe upto 5 Metr and other than concrete road crossing is necessary.USOR 8th Amendment OF Issued vide order no. 368 dt 27.01.2023 Item.no.17.41.4 -P.no. 1

Providing making and testing of Consumer Service Connection (Functional House Hold Tap Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass insert flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE 20mm dia/Gl pipe 15 mm dia (medium class), brass tap with Stainesless steel coating etc. all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), Pre-fabricated cement concrete platform in CC M-20 grade over 75 mm thick M-10 (1:3:6) base and Pre-fabricated Milestone shaped cement concrete stand post as per attached drawing and specifications. Complete item. For connection with 20 mm dia MDPE pipe upto 5 Metr to 10 mtr and other than concrete road crossing is necessary. USOR 8th Amendment OF Issued vide order no. 368 dt 27.01.2023 Item.no.17.41.5 -P.no. 2

Design, Drawing, construction, testing and commissioning of GSR/ Sumpwell of following capacity with all necessary fitting and accessories as mentioned in relevant chapter of USOR, IS codes and departmental circulars. complete turnkey job for following ( USOR. 2nd Amendment OF Issued vide order no. 254 dt 06.08.2020 Item-26.2.2 Pg. 17 ) 30KL

Supplying & Installation of Energy efficiant five star BEE rating ISI Marked required capacity of Three phase, 50 Hz, 415V, deep-well submersible pump Steel body, suitable for 6"tube well with clntrol Panel Starter suitable for Submersible pump with dry run protection(Auto cut-ofl), single phase preventer, connections, including clamps, bore cap, flat cable of length equals to maximum head of the pump plus 5 metres etc. as required as per specifications but excluding riser pipe and connection cable 10 H.P. with 20 stages, Head Mt. 184-80 Discharge LPM 60-270 USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no.24.20.106 (IX) P.no.41-42

Supplying & Installation of Five star BEE rating ISI Marked required capacity of Three phase, 50 Hz, 415V, Open well Submersible pump, with Control Panel Starter with Dry Run Protection, single phase preventer, connections, etc. as required as per specifications but excluding pipe and connection cable. II 5.0 H.P. Head Mt.15-24, Discharge LPM 930-420, USOR.Item.no. 24.20.113 P.no.268

Supplying and laying of approved Make Nylon rope 12mm thick complete with binding for support of pump and motor USOR.Item.no. 24.20.108 P - 267

Providing and jointing of following galvanized Iron (MS) Pipes class medium with heavy duty seamless sockets for lowering of submersible pumps including testing of joints, cost of pipes & heavy duty sockets and jointing materials all complete. Pipes and sockets confirming to IS:1239- 2011 Part-II. 50 mm dia Class Medium with heavy duty seamless sockets , II Amdt USOR 17.38.1 P-3

Supply & erection of readymade mini pump house (control panel box) GI sheet of 18 gauge of size 90cmx90cm x60cm with 40x40x5mm angle Iron frame to fix it 200mm below ground level with hold fasts grouted in foundation and 300mm above ground level for clearance suitable for fixing of control panel, fuse unit, main switch etc. as per approved specification.USOR item 17.18, P - 227

11 KV line on 140 kg. 8.0 Mtrs. long PCC Poles with rabbit conductor average span of 70 mtr. in rural area including labour complete. (Schedule Ref. C-1.1 of MPMKVVCL for SOR 2019-20)

11 KV D.P. Structures on 140 kg. 8.0 mtr. long PCC poles for tapping DP including labour complete. (Schedule Ref. C-5.2 of MPMKVVCL for SOR 2019-20)

11 KV D.P. Structures on 140 kg. 8.0 mtr. long PCC poles for straight line including labour complete. (Schedule Ref. C-5.1 of MPMKVVCL for SOR 2019-20)

L.T. Line 1 phase 3 wire on PCC support using Aerail Bunched XLPE cable with maximum span of 50 Meter including labour complete. 2 x 35+ 1 x 16 sq. mm (Insulated nuetral massenger) (Schedule Ref. D-3.2 of MPMKVVCL for SOR 2019-20)

11/0.4 KV out-door type transformer sub- station. 25 KVA on 140 kg. 8.0 meter long PCC Pole including labour complete.(Schedule Ref. E-1.1 of MPMKVVCL for SOR 2019-20)

Providing and fixing following check (non- return) valves Class- II, confirming to IS- 778/1984 (Reaffirmed 2005) female ends, tested to 21.09 kg/sq.cmt. 80 mm dia flanged USOR item 6.8 P 89

Providing & fixing following cast iron single acting air valves, large orifice with screwed end as per IS : 14845-2000 including jointing & testing with cost of jointing material and rubber insertion all complete as per IS :13095-1991 PHE USOR. Item.no. 8.10 Page No 115 CLASS PN-1.6 50 mm dia

Design, Drawing, construction, testing and commissioning of GSR/ Sumpwell of following capacity with all necessary fitting and accessories as mentioned in relevant chapter of USOR, IS codes and departmental circulars. complete turnkey job for following ( USOR. 2nd Amendment OF Issued vide order no. 254 dt 06.08.2020 Item-26.2.4 Pg. 17 ) 50KL

Please Enable Macros to View BoQ information