Construction of Waste to Compost Plant and Material Recovery Facility

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas exceeding 30 cm in depth, 1.5 min width as well as10 sqm onplan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in charge. All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Brickwork with common burnt clay modular bricks of class designation 7.5 in foundation and Plinth in: Cement Mortar 1:6 (1cement :6 coarse sand).

Brickwork with common burnt clay F.P.S. (non- modular) bricks of classdesignation7.5 in superstructure above plinth level upto floor V Level in all shapes and sizes in: Cementmortar1:4(1cement:4 Coarse sand) 230 mm thick wall

115 mm thick wall

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level: 1:1.5:3(1cement:1.5coarse sand (zone-III) derived from natural sources: 3 graded stone Aggregate 20 mm nominal size derived from natural sources)

Soling(or sub base) of well burnt soling bricks Including filling of interstice sand rolling.(Old size bricks, one layer laid on flat.)

15mmcementplasterontheroughsideof Single or half brick wall of mix: 1:6(1cement:6fine sand)

White washing with lime to give an even Shade

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture On steel galvanized iron/steel works

Steel work in built-up tubular (round, square or rectangular hollow tubes etc.)trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped Washers etc. Complete. Hot finished seamless type tubes

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or'L' hooks, bolts& nuts 8mm dia. G.I. plain /bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel roving’s incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or Smooth as specified.

Providing and fixing bolts including nuts and Washers complete

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10sqm on plan including getting out and disposal of excavated earth upto 50m and lift upto1.5m, As directed by Engineer-in-Charge: All kind of soil

Sand filling under floors or in foundations including watering and consolidation

Soling (or sub base) of well burnt soling bricks including filling of Interstices and rolling.(Old size brick, one layer laid flat.)

1:2:4(1cement: 2 coarse sand (zone-III) derived from natural sources:4 graded stone aggregate 20mm nominal size derived from natural sources)

Miscellaneous

Campus Electrification Material & Labour Steel tubular waged poles complete with cast iron base plate,finial taper plug, bolts, nuts & screws as specified type410SP-22 (8.5 metres long)

Eaves gutter and pipes any description, exc 60cm girth including holder bats,distance pieces, etc.(length measured over bends, branches etc.) Aluminium paint (each coat)

Fixing only street light fitting, for 70/80 watt vapour or sodium vapour lamp, complete with ballast and capacitor comprising of cast aluminium housing, a pair of aluminium reflectors, a highly transparent clear acrylic cover hinged to the canopyatone end and fixed by means of single spring action at the other, suitable for mounting on 40mm or 50mm dia.G.I.mast Or bracket arms with pole fix in attachments and fix in go flamp

Supply and fixing of junction box of size280 X 170 X 130 mm with hinges and locking arrangement & MS clamp made of 50X 6mm flat complete in All respect.

Supply and laying of following sizes Al. conductor PVC insulated armoured Seethed cable of 1100V gradeat a depth of 750mm B.G.L Ditto, butsec area 35sq.mm.(3core)

Ditto, butsec area 16sq.mm. (2core16 sqm)

supply and fixing of G.I. pipe of 80mm dia along the pole for protection of Underground cable as required

Ditto, butusing galvanized iron strip25×4mm as earthing lead.

Supply and fixing of feeder pillar of M.S cubicle box of size 100x75x40cm made from 2mm M.S sheet using angle of size 40x40x6mm duly hinged And locking arrangement, painting two coats of enameled paint overred

Oxide primer providing aluminium Bus-bar or suitable size with100A/415 V TPN rewirable type main switch with cement concrete foundation providing 1 Mtr GI pipe on 100 mm dia complete in all respects as per direction of E/I. Supply and making of earth main hole of size 1'x1'and2' deep with1'x1'CI chamber brick work etc.

LT panel/Feeder Pillar having on eno incoming panel, 5no’s,outgoing Panel and one number change over switch for DG set.

Supply and installation of 1000kg and 100g Accuracy Heavy Duty Steel Platform Digital Weighing Scale including all equipment, materials, complete with all taxes.

The equipment/ facilities to be provided at each Customer Handling Cell are proposed Computer within-built modem & fax software

Printer

Telephone(landline)

Wireless/Mobile phone

Complaint log book

Table

Chairs

DHANAPATI ADHIKARY (BID ID -273163)

BIMALENDU DAS (BID ID -273309)