Shifting and installation of 3.3KV Transformer and Electrical panels from EQ7 Berth Substation to EQ5 Substation for providing of 3.3KV Power supply to 20 Ton capacity ELL wharf cranes at EQ-6 berth

Amount

PART-A - Supply, Drawing and laying of 3 core, 120 SQ. MM, 3.3KV (E) grade, armoured, XLPE insulated, PVC sheathed, stranded aluminium conductor cable as per 7098 Part-II in earth / in the existing closed concrete trench / GI pipe complete as directed by engineer in charge including all labour tools & tackles. MAKE: POLYCAB / RPG / FINOLEX / GLOSTER / FINECAB / UNIVERSAL / REI

Supply, Drawing and laying of 3 Core X 25 Sq.mm + 1C X 16 Sq.mm 3.3 KV (E) with annealed tinned copper wire stranded conductor, EPR (type-IE-3) insulated cores laid up together suitably around HR rubber center PCP (type-SE-3) inner sheathed on open braid of cotton twin reinforcement in between inner and outer sheath, over all outer PCP (type-SE-4) sheathed with anti twisting protections of synthetic yarms integrated in it with minimum bending radius 10 X over all dia of cable confirming to is 9968/Part-II 1988 with latest amendments. Make: SUN/ any equivalent .

Supply, drawing of Indoor cable End Termination Kit suitable for 3.3 KV (UE) voltage rating flexible Copper Trailing cable of size 3.5 X 25 Sq.mm. Make: 3M / cabseal / any equivalent

PART-B - Disconnection and removal of existing 11KV/3.3 KV, 1600 KVA power transformer from EQ-7 Substation without any damage / disturbing circuitry parts and transportation of the same with the help of crane & truck to EQ-5 substation and Installation, connecting, testing and commissioning of the transformer at EQ-5 berth Substation including loading / Unloading complete with all labour, tools, tackles and materials, as directed by engineer in charge.

Disconnecting, Dismantling and Removal of existing 3.3 KV SF-6 breaker cubical panel consisting of 1 nos incomer and 3 nos outgoings at EQ-7 substation duly disconnecting the cables & bus interlocking arrangement, including control circuit protection system without damaging/disturbing circuitry parts, complete with all labour, tools, tackles and materials, as directed by engineer in charge.

Shifting, transportation, Installation, testing and commissioning of 3.3 KV SF-6 breaker cubical panel consisting of 1no incomer and 3nos outgoings at EQ-5 substation duly connecting the cables & bus interlocking arrangement, including control circuit protection system including transportation loading / unloading of the breaker cubical from EQ-7 substation with suitable crane /Truck, complete with all labour, tools, tackles and materials, as directed by engineer in charge.

Supply and providing heat shrinkable HT indoor end termination of approved brand suitable for 3 core, 3.3 KV (E), 120-185 sq.mm XLPE aluminium conductor cable complete with all labour, tools, tackles and materials, as directed by engineer in charge. MAKE: RAYCHEM /3M / DENSION

Supply and providing heat shrinkable HT straight through joints of approved brand suitable for 3 core, 3.3 KV (E), 120-185 sq.mm XLPE aluminium conductor cable complete with all labour, tools, tackles and materials, as directed by engineer in charge. MAKE: RAYCHEM /3M / DENSION

Dismantle Removal of 11KV/415Volts, 1000 KVA indoor type existing transformer without damaging/ disturbing circuitry parts at EQ-5 substation and transportation shifting to EQ-7 SS /General stores complete with all labour, tools, tackles and materials, as directed by engineer in charge.

Removal & Re-laying of RCC slab covers on the existing cable trench with help of crane without damage to the material as directed by engineer in charge including all labour tools & tackles.

Breaking of RCC of required width and depth to form cable duct / trench and removing the debris within a lead of 50 mtrs complete with all labour, tools, tackles and materials. as directed by engineer in charge

Supply and providing of P.C.C. 1:3:6 with 20 mm graded granite as coarse aggregate and river sand as fine aggregate (220 Kgs of cement per M3of finished concrete) including mixing, depositing in position, tamping, finishing and curing for base concreting, road cutting etc. as directed by engineer in charge including all labour and tools.

Supply, fabrication, welding / riveting / bolting steel built up sections, frame work including cutting, drilling holes, making clamps, cable route markets etc., with suitable size MS Sheet for closing sides of panels M.S. channels, Angles, flats, bolts & nuts washers including applying of one coat of red oxide complete with all labour, tools, tackles and materials. As directed by engineer in charge.

Supply and Providing ol Cl earth station using 80 mm dia, Cl Pipe: of length 2.5 meters long, duly perforated and in a suitable pit of required depth filled with alternate layers of salt and charcoal complete with flanged and covering with PCC cover and conforming to lS 3043 as directed by Engineer-in-charge including all labour and material..

Supply, fixing, connecting and commissioning of 50 x 6 mm GI earth strip in recess/surface/clamped to wall/through PCC etc., from earth to switch gear/equipment including connecting the same at both ends as directed by engineer in charge including all labour and material.

Cleaning of cable trench manholes duly removal of spill over cargo and shifting within a lead of 0.5 KM complete with all labour, tools, tackles and materials as directed by engineer in charge.

Dismantling and Removal of existing 440Volts LT distribution panel cubical consisting of One incomer, one bus coupler & 6 out goings at EQ-5 substation duly disconnecting the cables & bus interlocking arrangement, including control circuit protection system without damaging/disturbing circuitry parts, including loading / un loading as directed by engineer in charge complete with all labour, tools, lifting tackles, truck etc and handover the same to 11 KV SS / General stores.

Supply, Fixing, testing and commissioning of 55-60 watt high Bay LED street luminaire comprising of powder coated single piece aluminium die-cast housing heat resistant toughened glass IP 65-66 protection to work on 120-270VAC including 5 years warranty. Make: CG / GE/ Wipro / Philips / Jaguar / Insta power / VIN / Syska

Fabrication and fixing of 14 SWG CRCA sheet steel to side faces of the panel to protect the entry of moisture / vermin into the panel cubicle after disconnection the extended panel, including cutting, bending drilling, welding and riveting etc., and painting with powder coating to match with the existing paint le as directed by Engg. I/c complete with all materials labour, tools and tackles.

Supply and running of circuit wiring with following 1.1 KV grade, PVC insulated, multi stranded copper conductor cable for switch boards, power sockets etc., in open conduit wiring suitable dia, PVC conduit, flexible conduit, elbows, bends etc., on the wall/ ceiling, with suitable clamps including connections complete with all all labour, tools, tackles and material, as directed by Engineer in charge. a) 3runs of 2.5 Sqmm

b) 3runs of 1.5 Sqmm Brands:1)for cable: L&T/ radiant/ polycab/ rpg/ Finolex/ plaza / nicco 2)For PVC pipe: sudhakar/plaza /mercury/Radiant/Avon Plast (Note: 1 RMT is equal to 1 Mtr of 3 wires in conduit)

Supply, Fixing testing and commissioning of 3 phase, 415V, 4 Way, MCB distribution board on existing angular frame duly grouted to the wall including connecting the incoming and load connections as directed by Engineer –in-charge with all labour material tools and tackles with following switchgear.Incomer: 3 phase,4pole; 400/440v, 63A, Isolator - 1no, Out going: single pole 6 to 32 A MCBs - 12nos, Brands: Siemens/ABB/Standard/Havells/HPL/Hager /Indo Asian/C&S/GM /Gold Medal

Supply, fixing testing and commissioning of 3 phase, 415V, 63A (RSFU) of approved brand with natural link with porcelain fuses in sheet steel enclosure on suitable MS frame duly grouted to the wall as directed by Engineer-in-charge including all labour and materials. Brands: C&S / L&T/HPL

Supply, fixing, connecting and commissioning of 6 SWG dia GI wire in recess/surface/clamped to wall/through PCC etc., from earth to switch gear/equipment including connecting the same at both ends as directed by engineer in charge including all labour and material.

Supplying and fixing 75 mm X 75 mm X 60 mm size metal box on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as directed by Ehgg. I/c complete with all materials labour tools and tackles.

Supplying and fixing 5/6 Amps piano type switch/ socket on the existing switch box/ cover including connections etc. as as directed by Engg. I/c complete with all materials labour tools and tackles. Brands: CONA / Anchor / Million

Supplying and fixing 5/6 Amps 3/2 pin flush socket with shutter on the existing switch box/ cover including connections etc. as directed by Engg. I/c complete with all materials labour tools and tackles. Brands: CONA / Anchor / Million

P S ENTERPRISES